标准号 |
中文名称 |
英文名称 |
BS EN 61010-2-045-2001 |
测量、控制和实验室用电气设备的安全要求.医疗、药用、兽医和实验室用洗涤机消毒器的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fi) |
BS EN 61010-2-051-2003 |
测量、控制和实验室用电气设备的安全要求.混合和搅拌用实验室设备的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for mixing and stirring) |
BS EN 61010-2-061-2003 |
测量、控制和实验室用电气设备的安全要求.具有热原子化和离子化的实验室原子光谱测定仪的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization) |
BS EN 61010-2-081-2002 |
测量、控制和实验室用电气设备的安全要求.分析和其他目的用的自动和半自动实验室设备的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes) |
BS EN 61010-2-101-2002 |
测量、控制和实验室用电气设备的安全要求.实验室诊断(IVD)医疗设备的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment) |
BS EN 61012-1991 |
伴有超声情况下可听声测量用滤波器 |
(Filters for the measurement of audible sound in the presence of ultrasound) |
BS EN 61014-2003 |
可靠性增长用程序 |
(Programmes for reliability growth) |
BS EN 61016-2001 |
使用19mm磁带(格式D-1)的螺旋扫描数字式件盒式录像带记录系统 |
(Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)) |
BS EN 61019-2-1997 |
表面声波谐振器的使用导则 |
(Surface acoustic wave (SAW) resonators - Guide to the use) |
BS EN 61019-2-2005 |
表面声波谐振器.使用导则 |
|
BS EN 61021-1-1990 |
电信和电气设备用的变压器和电感器的叠片铁心包.第1部分:尺寸规范 |
(Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions) |
BS EN 61021-2-1997 |
电信和电气设备用的变压器和电感器的叠片铁心包.第2部分:用YEE 2叠片铁芯的电器性能 |
(Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Electrical characteristics for cores using YEE 2 laminations) |
BS EN 61023-2000 |
海上导航和无线电通信设备和系统.航海速度和距离的测量设备(SDME).性能要求.试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results) |
BS EN 61027-1993 |
可听音阻抗/导纳测量用仪表规范 |
(Specification for instruments for the measurement of aural acoustic impedance/admittance) |
BS EN 61028-1991 |
电气测量仪表规范.X-Y记录器 |
Specification for electrical measuring instruments - X-Y recorders |
BS EN 61029-1-2000 |
可移动马达控制的电动机床的安全.一般要求 |
(Safety of transportable motor-operated tools - General requirements) |
BS EN 61029-2-1-2002 |
可移动马达操手工工具的安全性.圆盘锯工作台的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for circular saw benches) |
BS EN 61029-2-11-2003 |
移动式电动工具的安全.组合横切锯和台锯的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws) |
BS EN 61029-2-4-2003 |
移动式电动机床的安全.台式磨床的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for bench grinders) |
BS EN 61029-2-5-2002 |
可移动马达操手工工具安全性.带状锯的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for band saws) |
BS EN 61029-2-8-2003 |
移动式电动工具的安全.单芯轴垂直模压机的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders) |
BS EN 61029-2-9-2003 |
移动式电动机床的安全.斜切锯的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for mitre saws) |
BS EN 61030-1991 |
音频、视频和视听系统用家用数字总线(DZB)规范 |
(Specification for domestic digital bus (D2B) for audio, video and audiovisual systems) |
BS EN 61032-1998 |
用外壳对人体和设备进行保护.验证用探针 |
(Protection of persons and equipment by enclosures - Probes for verification) |
BS EN 61037-1990 |
电表.电费和负载控制.电子脉动控制接收器的特殊要求 |
(Electricity metering - Tarriff and load control - Particular requirements for electronic ripple control receivers) |
BS EN 61038-1991 |
费率和负载控制用计时开关规范 |
(Specification for time switches for tariff and load control) |
BS EN 61040-1993 |
激光辐射功率和能量探测器、仪表和设备规范 |
(Specification for power and energy measuring detectors, instruments and equipment for laser radiation) |
BS EN 61041-1-1991 |
非播放用磁带录像机.测量方法.一般视频(NTSC/PAL)和声频(纵向)特性 |
(Non-broadcast video tape recorders - Methods of measurement - General video (NTSC/PAL) and audio (longitudinal) characteristics) |
BS EN 61041-2-1996 |
非播放用磁带录像机.测量方法.视频特性色度SECAM |
(Non-broadcast video tape recorders - Methods of measurement - Video characteristics chrominance SECAM) |
BS EN 61041-3-1994 |
非播放用磁带录像机.测量方法.FM制式录音用声频特性 |
(Non-broadcast video tape recorders - Methods of measurement - Audio characteristics for FM recording) |
BS EN 61041-4-1998 |
非播放用磁带录像机.测量方法.校正磁带(NTSC/PAL/SECAM) |
(Non-broadcast video tape recorders - Methods of measurement - Calibration tape (NTSC/PAL/SECAM)) |
BS EN 61041-5-1998 |
非播放用磁带录像机.测量方法.包括装配有Y/C视频连接器(NTSC/PAL)的高频带磁带录像机 |
(Non-broadcast video tape recorders - Methods of measurement - High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)) |
BS EN 61043-1994 |
电声学规范.声强测量仪.双压传感传声器测试 |
(Specification for electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones) |
BS EN 61044-1993 |
铝酸牵引蓄电池的临时性充电 |
(Opportunity-charging of lead-acid traction batteries) |
BS EN 61047-1993 |
白炽灯直流和交流供电电子降压变流器规范.性能要求 |
Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements |
BS EN 61047-2004 |
钨丝灯用交直流供电电子降压转换器.性能要求 |
|
BS EN 61047-2004 |
钨丝灯用交直流供电电子降压转换器.性能要求 |
|
BS EN 61048-1993 |
管形荧光灯和其它放电电灯电路用电容器的一般要求和安全要求规范 |
(Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements) |
BS EN 61049-1993 |
管形荧光灯和其它放电灯电路用电容器的性能要求规范 |
Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
BS EN 61050-1992 |
空载输出电压超过1000V的管形放电用变压器规范(一般叫做氖管变压器).一般要求和安全要求规范 |
Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements |
BS EN 61056-1-2003 |
便携式铅酸电池和蓄电池(阀调节型).一般要求、功能特性.试验方法 |
Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test |
BS EN 61056-2-2003 |
便携式铅酸电池和蓄电池(阀调节型).尺寸、端子和标记 |
Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking |
BS EN 61057-1994 |
超过1kV a.c.带电作业用带绝缘杆的高空作业器械 |
Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
BS EN 61058-1-2002 |
电器开关.一般要求 |
Switches for appliances - General requirements |
BS EN 61058-2-1-1993 |
设备开关.特殊要求.拉线开关 |
(Switches for appliances - Particular requirements - Cord switches) |
BS EN 61058-2-5-1995 |
器件开关.特殊要求.转换开关选择器 |
(Switches for appliances - Particular requirements - Change-over selectors) |
BS EN 61061-1-1998 |
电气用非浸渍硬化层压板.定义、名称与符合和一般要求 |
Non-impregnated densified laminated wood for electrical purposes - Definitions, designations and general requirements |
BS EN 61061-2-2002 |
电工用非浸渍致密层压板.试验方法 |
(Non-impregnated densified laminated wood for electrical purposes - Methods of test) |
BS EN 61061-3-1-1998 |
电气用途的非浸渍致密层压板.单独材料规范.由山毛榉胶合板制成的片材制品 |
(Non-impregnated densified laminated wood for electrical purposes - Specification for individual materials - Sheets produced from beech veneer) |
BS EN 61061-3-2-2002 |
电工用非浸渍致密层合木板.单项材料规范.毛榉薄板制成的环材 |
(Non-impregnated densified laminated wood for electrical purposes - Specification for individual materials - Rings produced from beech veneer) |
BS EN 61063-1996 |
声学.由蒸汽轮机和被驱动的机器发出的空载噪音的测量 |
(Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery) |
BS EN 61064-1993 |
汽轮机速度控制系统验收试验指南 |
(Guide to acceptance tests for steam turbine speed control systems) |
BS EN 61065-1993 |
老化后矿物绝缘油低温流动特性的评估方法 |
(Method for evaluating the low temperature flow properties of mineral insulating oils after ageing) |
BS EN 61067-1-1997 |
玻璃和玻璃聚酯纤维机织带.第1部分:定义、分类和一般要求 |
(Glass and glass polyester fibre woven tapes - Definitions, classification and general requirements) |
BS EN 61067-2-1997 |
玻璃和玻璃聚酯纤维机织带.第2部分:试验方法 |
(Glass and glass polyester fibre woven tapes - Methods of test) |
BS EN 61067-3-1-1995 |
玻璃和玻璃聚酯纤维机织带.第3部分:单项材料规范.第1活页:1,2,3型织带 |
(Glass and glass polyester fibre woven tapes - Specifications for individual materials - Type 1, 2 and 3 tapes) |
BS EN 61068-1-1997 |
聚酯纤维机织带.第1部分:定义、名称牌号和一般要求 |
(Polyester fibre woven tapes - Definitions, designation and general requirements) |
BS EN 61068-2-1997 |
聚酯纤维机织带.第2部分:试验方法 |
(Polyester fibre woven tapes - Methods of test) |
BS EN 61068-3-1-1996 |
聚酯纤维机织带.第3部分:单项材料规范.第1活页:常规的或无梭织机编织带 |
(Polyester fibre woven tapes - Specification for individual materials - Tapes woven on conventional or shuttleless looms) |
BS EN 61069-1-1993 |
工业过程测量和控制.用于系统评定的系统特性的评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - General considerations and methodology) |
BS EN 61069-2-1994 |
工业处理测量和控制.系统评定用系统特性估定.第2部分:评定方法 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment methodology) |
BS EN 61069-3-1997 |
工业流程测量和控制.系统评定用系统性能的评价.系统功能度的评价 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system functionality) |
BS EN 61069-4-1998 |
工业过程测量和控制.用于系统评定的系统特性的评估.系统性能评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system performance) |
BS EN 61069-5-1995 |
工业处理测量和控制.系统评定用系统特性估定.第5部分:系统可靠性评定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system dependability) |
BS EN 61069-6-1998 |
工业过程测量和控制.用于系统评定的系统特性的评估.系统操作性能的评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system operability) |
BS EN 61069-7-1999 |
工业过程测量和控制.系统评定用系统性能的评价.系统安全的评定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system safety) |
BS EN 61069-8-1999 |
工业过程测量和控制.系统评定用系统性能的评价.非任务相关系统的性能评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of non-task related system properties) |
BS EN 61071-1-1997 |
补偿电容器.第1部分:总则 |
(Power electronic capacitors - General) |
BS EN 61071-2-1996 |
补偿电容器.第2部分:熔断器上的切断试验.破坏试验.自行恢复试验和疲劳试验的要求 |
(Power electronic capacitors - Requirements for disconnecting test on fuses, destruction test, self healing test and endurance test) |
BS EN 61073-1-2000 |
光纤和光缆的机械接头和熔融接头防护器.总规范 |
(Mechanical splices and fusion splice protectors for optical fibres and cables - Generic specification) |
BS EN 61074-1993 |
用差示扫描量热法测定电子绝缘材料熔化和结晶时所产生的热量和温度的试验方法 |
(Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry) |
BS EN 61075-1991 |
船舶用C型导航接收仪.最低性能标准.试验方法和所需试验结果 |
(Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results) |
BS EN 61076-1-1996 |
直流低频率模拟及高速数据数字系统用的已进行过质量评定的连接器.总规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Generic specification) |
BS EN 61076-2-001-2002 |
直流低频模拟和数字高速数据设备用经质量评定的连接器.圆形连接器.空白详细规范 |
(Connectors for electronic equipment - Circular connectors - Blank detail specification) |
BS EN 61076-2-101-2004 |
电子设备用连接器.圆形连接器.低压螺钉锁紧或快速锁紧的M8圆形连接器和螺钉锁紧的M12圆形连接器的详细规范 |
|
BS EN 61076-2-101-2004 |
电子设备用连接器.圆形连接器.低压螺钉锁紧或快速锁紧的M8圆形连接器和螺钉锁紧的M12圆形连接器的详细规范 |
|
BS EN 61076-2-101-2004 |
电子设备用连接器.圆形连接器.低压设备用螺口或卡口的M8圆形连接器和螺口的M12圆形连接器的详细规范 |
|
BS EN 61076-2-102-2002 |
电子设备连接器.圆形连接器.质量评定的圆形连接器.室外低压供电站用的插头和插座的详细规范 |
(Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply) |
BS EN 61076-2-103-2004 |
电子设备连接器.圆形连接器.一系列多点连接器的详细规范(XLR型) |
|
BS EN 61076-2-103-2004 |
电子设备用连接器.圆形连接器.一系列多点连接器的详细规范(XLR型) |
|
BS EN 61076-2-103-2004 |
电子设备用连接器.圆形连接器.一系列多点连接器的详细规范(XLR型) |
|
BS EN 61076-2-103-2004 |
电子设备用连接器.圆形连接器.一系列多点连接器的详细规范(XLR型) |
|
BS EN 61076-2-1999 |
直流低频模拟及高速数据数字系统用经质量评定的连接器.经质量评定的圆形连接器.分规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Circular connectors with assessed quality - Sectional specification) |
BS EN 61076-3-001-2000 |
直流低频模拟及高速数据数字系统用经质量评定的连接器.矩形连接器.空白详细规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Blank detail specification) |
BS EN 61076-3-100-2004 |
直流低频模拟及数字高速数据应用系统用经质量评定的连接器.矩形连接器.带有1.27mm双排不可拆卸矩形接触件及梯形外壳的屏蔽系列连接器的详细规范 |
|
BS EN 61076-3-100-2004 |
直流低频模拟及数字高速数据应用系统用连接器.有质量评定的矩形连接器.带有1.27mm双排不可拆卸矩形接触件及梯形外壳的屏蔽系列连接器详细规范 |
|
BS EN 61076-3-101-1998 |
直流低频模拟及高速数据数字系统用已质量评定的连接器. 矩形连接器.带梯形壳的屏蔽连接器的有效范围和在1.2 |
() |
BS EN 61076-3-103-2004 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.矩形连接器.高速串行数据(HSSDC)用带1.25mm间距不可拆卸带状电缆接触件的单排连接器的详细规范 |
|
BS EN 61076-3-103-2004 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.矩形连接器.高速串行数据(HSSDC)用带1.25mm间距不可拆卸带状电缆接触件的单排连接器的详细规范 |
|
BS EN 61076-3-104-2003 |
直流低频率模拟及数字高速数据系统用的已进行过质量评定的连接器.矩形连接器.最低频率为不大于600MHz的数据 |
() |
BS EN 61076-3-2000 |
直流低频模拟及高速数据数字系统用经质量评定的连接器.经质量评定的矩形连接器.分规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors with assessed quality - Sectional specification) |
BS EN 61076-4-001-1997 |
直流低频模拟设备和高速数字数据应用设备用已质量评定的连接器.印制电路板连接器.空白详细规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification) |
BS EN 61076-4-100-2002 |
用于直流低频模拟,使用数字高速数据的连接器(带有质量评定).印制板连接器.具有2.5mm网格,印制板和背板用两 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connector modules h) |
BS EN 61076-4-101-2001 |
直流低频模拟和数字高速数据用经质量评定的连接器.印刷电路板用连接器.符合IEC 60917的印刷电路板及底板用 |
() |
BS EN 61076-4-102-1997 |
直流低频率模拟及高速数据数字系统用已进行过质量评定的连接器.第4部分:印制电路板联接器.第102节:带前定心 |
() |
BS EN 61076-4-103-1999 |
直流低频模拟及高速数据数字系统用连接器.经质量评定的印制电路板连接器.带外壳和2.5mm基栅的双面连接器 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shi) |
BS EN 61076-4-104-1999 |
直流低频模拟和数字高速数据设备用经质量评定的连接器.印制板连接器.终端在0.5MM多重栅极的基本栅极为2.0MM |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid) |
BS EN 61076-4-105-1998 |
直流低频模拟及高速数据数字系统用经质量评定的连接器.印制电路板用连接器.各种用途包括电信和声讯工程用的 |
() |
BS EN 61076-4-107-2001 |
经质量评定的用于直流、低频模拟和高速数据应用的连接器.具有基本网格为0.2mm印制板用焊接和压紧接端固定件 |
() |
BS EN 61076-4-108-2003 |
电子设备连接器.经质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距和集成屏蔽功 |
() |
BS EN 61076-4-110-2002 |
直流低频模拟和数字高速数据设备用经质量评定的连接器.印制板连接器.基本栅级为2.0mm并具有完全屏蔽和锁定 |
() |
BS EN 61076-4-111-2002 |
电子设备连接器.质量评定的印制板.印制板及底板用网格为2.5 mm的、与IEC 60917-1协调一致的两件式连接器组 |
() |
BS EN 61076-4-113-2003 |
电子设备连接器.经质量评定的印制电路板连接器.印制电路板和总线底板用网格为2.5mm的5列两件式连接器的详细 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplan) |
BS EN 61076-4-114-2003 |
电子设备用连接器.经质量评定的印制板连接器.格栅为1mmx1.5mm的有整体屏蔽功能的两件式连接器详细规范 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm) |
BS EN 61076-4-115-2003 |
电子设备用连接器.经质量评定的印制板连接器.无限频带设备用印制板背面连接器 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Backplane connector for InfiniBand equipment) |
BS EN 61076-4-1997 |
直流低频模拟及高速数据数字系统用经质量评定的连接器.分规范.印制电路板用连接器 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Sectional specification - Printed board connectors) |
BS EN 61076-5-2001 |
直流低频率模拟及高速数据数字设备用的连接器.已进行过质量评定的串联插座.分规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification) |
BS EN 61076-6-2004 |
电子设备用连接器.可拆部分触点.分规范 |
|
BS EN 61076-7-001-2004 |
电子设备连接器.电缆引出端附件.空白详细规范 |
|
BS EN 61076-7-001-2004 |
电子设备用连接器.电缆引出端附件 |
|
BS EN 61076-7-001-2004 |
电子设备连接器.电缆引出端附件.空白详细规范 |
|
BS EN 61076-7-2001 |
直流低频率模拟及高速数据数字系统用的已进行过质量评定的连接器.分规范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Cable outlet accessories with assessed quality, including qualification and capa) |
BS EN 61077-1992 |
采用12.65mm(0.5in)VHS型磁带的螺旋扫描盒式带录像系统.小型VHS盒式录像带 |
(Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Compact VHS video cassette) |
BS EN 61078-1992 |
系统、设备和部件的可靠性.方框图法使用指南 |
(Reliability of systems, equipment and components - Guide to the block diagram technique) |
BS EN 61079-1-1995 |
12GHz频带卫星广播接收机的测量方法.第1部分:露天设备的射频测量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Radio-frequency measurements on outdoor units) |
BS EN 61079-2-1995 |
12GHz频带卫星广播接收机的测量方法.DBS调谐设备的电气测量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements on DBS tuner units) |
BS EN 61079-3-1995 |
12GHz频带卫星广播接收机的测量方法.第3部分:接收天线系统包括户外装置和DBS调谐装置总性能的电测量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS t) |
BS EN 61079-5-1995 |
12GHz频带卫星广播接收机的测量方法.MAC/包系统的译码器单的测量方法 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements on decoder units for MAC/packet systems) |
BS EN 61082-1-1993 |
电工技术使用的文件的制订.一般要求 |
(Preparation of documents used in electrotechnology - General requirements) |
BS EN 61082-2-1994 |
技术电工使用的编制文件.第2部分:功能图 |
(Preparation of documents used in electrotechnology - Function-oriented diagrams) |