标准号 |
中文名称 |
英文名称 |
DIN EN ISO 10882-2-2001 |
焊接及相关工艺中的健康和安全.工作人员工作区气载粒子和气体的取样.第2部分:气体取样 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator`s breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000) |
DIN EN ISO 10938-1998 |
眼科仪器.图表放映机 |
(Ophthalmic instruments - Chart projectors (ISO 10938:1998); German version EN ISO 10938:1998) |
DIN EN ISO 10939-1998 |
眼科设备.显微裂隙灯 |
(Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:1998); German version EN ISO 10939:1998) |
DIN EN ISO 10940-1998 |
眼科器械.眼底照相机 |
(Ophthalmic instruments - Fundus cameras (ISO 10940:1998); German version EN ISO 10940:1998) |
DIN EN ISO 10942 Berichtigung 1-1998 |
对DINENISO10942:1998-06的校正 |
(Corrigenda to DIN EN ISO 10942:1998-06 (EN ISO 10942:1998/AC:1998)) |
DIN EN ISO 10942-1998 |
眼科器械.眼底镜直接检查 |
(Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:1998); German version EN ISO 10942:1998) |
DIN EN ISO 10943-1998 |
眼科器械.眼底镜间接检查 |
(Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:1998); German version EN ISO 10943:1998) |
DIN EN ISO 10944-1998 |
眼科器械.同视镜 |
(Ophthalmic instruments - Synoptophores (ISO 10944:1998); German version EN ISO 10944:1998) |
DIN EN ISO 10960-1996 |
橡胶和塑料软管.在动力条件下耐臭氧性的评定 |
(Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996) |
DIN EN ISO 10964-1997 |
粘合剂.螺纹紧固件上厌氧粘合剂的抗扭强度的测定 |
(Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993); German version EN ISO 10964:1997) |
DIN EN ISO 10993-1 Berichtigung 1-1999 |
对DINENISO10993-1:1998-06的校正 |
(Corrigenda to DIN EN ISO 10993-1:1998-06) |
DIN EN ISO 10993-1-1998 |
医疗器械的生物评定.第1部分:评定和试验 |
(Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:1997); German version EN ISO 10993-1:1997) |
DIN EN ISO 10993-10-2003 |
医疗器械的生物评定.第10部分:刺激与延迟式超灵敏性试验 |
(Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity (ISO 10993-10:2002); German version EN ISO 10993-10:2002) |
DIN EN ISO 10993-11-1995 |
医疗装置生物学评定.第11部分:系统毒性试验 |
(Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:1993); German version EN ISO 10993-11:1995) |
DIN EN ISO 10993-12-1996 |
医疗器械的生物评定.第12部分:样品制备和参考材料 |
(Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:1996); German version EN ISO 10993-12:1996) |
DIN EN ISO 10993-13-1999 |
医学化合物的生物评定.第13部分:聚合医学化合物中降解物的质量和数量验证 |
(Biological evaluation of medical devices - Part 13: Identification and and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998); German version EN ISO 10993-13:1998) |
DIN EN ISO 10993-14-2002 |
医疗器械的生物评定.第14部分:陶瓷降解产品的识别与量化 |
(Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001); German version EN ISO 10993-14:2001) |
DIN EN ISO 10993-15-2001 |
医疗器械的生物评定.第15部分:金属及合金中降解产物的识别与量化 |
(Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000); German version EN ISO 10993-15:2000) |
DIN EN ISO 10993-16-1997 |
医疗器械的生物评定.第12部分:对退化产品和可滤清物的毒理动力学研究的方案和计算 |
(Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997); German version EN ISO 10993-16:1997) |
DIN EN ISO 10993-17-2003 |
医疗器械的生物评定.第17部分:可浸出物质容许限值的确定 |
(Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002); German version EN ISO 10993-17:2002) |
DIN EN ISO 10993-18-2005 |
医疗装置的生物评价.第18部分:材料的化学表征 |
|
DIN EN ISO 10993-2-1998 |
医疗器械的生物评定.第2部分:动物保护的要求 |
(Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:1992); German version EN ISO 10993-2:1998) |
DIN EN ISO 10993-3-2004 |
医疗器械的生物学评价.第3部分:遗传毒性、致癌性和生殖毒性的试验 |
(Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2003); German version EN ISO 10993-3:2003) |
DIN EN ISO 10993-3-2004 |
医疗器械的生物学评价.第3部分:遗传毒性、致癌性和生殖毒性的试验 |
|
DIN EN ISO 10993-4-2003 |
医疗器械的生物评定.第4部分:与血液相互作用的选择试验 |
(Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002); German version EN ISO 10993-4:2002) |
DIN EN ISO 10993-5-1999 |
医疗器械的生物评定.第5部分:细胞毒性试验:试管内方法 |
(Biological evaluation of medical devices - Part 5: Tests for cytotoxicity: in vitro-methods (ISO 10993-5:1999); German version EN ISO 10993-5:1999) |
DIN EN ISO 10993-7-1995 |
医学产品的生物评定.第7部分:环氧乙烷的灭菌残渣 |
(Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:1995); German version EN ISO 10993-7:1995) |
DIN EN ISO 10993-8-2001 |
医疗装置的生物评价.第8部分:生物试验用标准物质的选择和合格鉴定 |
(Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests (ISO 10993-8:2000); German version EN ISO 10993-8:2000) |
DIN EN ISO 10993-9-1999 |
医疗装置生物评定.第9部分:用于势降解产物识别与评定的结构 |
(Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:1999); German version EN ISO 10993-9:1999) |
DIN EN ISO 11058-1999 |
土工织物和土工织物相关产品.对平面,无负载,一般的水渗透性测定 |
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999); German version EN ISO 11058:1999 |
DIN EN ISO 11064-1-2001 |
控制中心的人类工效学设计.第1部分:控制中心的设计原则 |
(Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000), German version EN ISO 11064-1:2000) |
DIN EN ISO 11064-2-2001 |
控制中心的人类工效学设计.第2部分:控制室的布置原则 |
(Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000); German version EN ISO 11064-2:2000) |
DIN EN ISO 11064-3 Berichtigung 1-2003 |
DINENISO11064-3的技术勘误 |
(Corrigenda to DIN EN ISO 11064-3:2000-09 (EN ISO 11064-3:1999/AC:2002)) |
DIN EN ISO 11064-3-2000 |
控制中心的人类工效设计.第3部分:控制室布置 |
(Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-3:1999); German version EN ISO 11064-3:1999) |
DIN EN ISO 11064-4-2004 |
控制中心的人类工效学设计.第4部分:工作站的布置和尺寸 |
|
DIN EN ISO 11064-6-2005 |
控制中心人类工效学设计.第6部分:控制中心环境要求 |
|
DIN EN ISO 1107-2003 |
渔网.网片.基本术语和定义 |
(Fishing nets - Netting - Basic terms and definitions (ISO 1107:2003); German version EN ISO 1107:2003) |
DIN EN ISO 11070-1999 |
一次性无菌管内导管导引器 |
(Sterile single-use intravascular catheter introducers (ISO 11070:1998); German version EN ISO 11070:1999) |
DIN EN ISO 11091-1999 |
建筑制图.园林设计制图实用规程 |
(Construction drawings - Landscape drawing practice (ISO 11091:1994); German version EN ISO 11091:1999) |
DIN EN ISO 1110-1998 |
塑料.聚酰胺.试样的加速预处理 |
(Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995); German version EN ISO 1110:1997) |
DIN EN ISO 11102-1-1997 |
内燃机.手柄起动装置.第1部分:安全技术要求和检验 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997); German version EN ISO 11102-1:1997) |
DIN EN ISO 11102-2-1997 |
内燃机.手柄起动装置.第2部分:测量脱扣距离和角度的方法 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997); German version EN ISO 11102-2:1997) |
DIN EN ISO 11105-1997 |
小型船舶.装有强制点火发动机和/式油罐的房屋通风 |
(Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997); German version EN ISO 11105:1997) |
DIN EN ISO 11111-1-2005 |
纺织机械.安全要求.第1部分:通用要求 |
|
DIN EN ISO 11111-2-2005 |
纺织机械.安全要求.第2部分:纺纱预备和纺纱机械 |
|
DIN EN ISO 11111-3-2005 |
纺织机械.安全要求.第3部分:无纺机械 |
|
DIN EN ISO 11111-4-2005 |
纺织机械.安全要求.第4部分:纱线加工和绳索制造机械 |
|
DIN EN ISO 11111-5-2005 |
纺织机械.安全要求.第5部分:织造和针织用预备机械 |
|
DIN EN ISO 11111-6-2005 |
纺织机械.安全要求.第6部分:织物织造机械 |
|
DIN EN ISO 11111-7-2005 |
纺织机械.安全要求.第7部分:染色和精整机械 |
|
DIN EN ISO 11114-1-1998 |
可运输气瓶.装有气体的气瓶及其阀门材料的可互换性.第1部分:金属材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)(includes corrigendum AC:1998); German version EN ISO 11114-1:1997) |
DIN EN ISO 11114-2-2001 |
可运输气瓶.装有气体的气瓶及其阀门材料的可互换性.第2部分:非金属材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000) |
DIN EN ISO 11114-3-1998 |
可运输气瓶.气瓶和含气阀门材料的可兼容性.第3部分:有氧环境中自燃试验 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)(including corrigendum AC:1998); German version EN ISO 11114-3:1997 + AC:1998) |
DIN EN ISO 11114-4-2005 |
移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择耐氢脆的金属材料的试验方法 |
|
DIN EN ISO 11116-1-2000 |
移动式气瓶.气瓶.阀门与气体瓶连接用17E锥型螺纹.第1部分:规范 |
(Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999); German version EN ISO 11116-1:1999) |
DIN EN ISO 11116-2-1999 |
可移动的气罐.煤气罐.阀门与气罐连接的17E锥型螺纹.第1部分:检验量规 |
(Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999); German version EN ISO 11116-2:1999) |
DIN EN ISO 11120-1999 |
可移动的煤气瓶.储气容积在150立升至3000立升之间的密封煤气运输用无缝可重新填装的大型钢瓶.设计,结构和检 |
(Gas cylinders - Refillable seamless steel tubes water capacity between 150 l and 3000 l - Designconstruction and testing (ISO 11120:1999); German version EN ISO 11120:1999) |
DIN EN ISO 11124-1-1997 |
用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第1部分:一般介绍和分类 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993); German version EN ISO 11124-1:1997) |
DIN EN ISO 11124-2-1997 |
用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第2部分:冷硬铸铁砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993); German version EN ISO 11124-2:1997) |
DIN EN ISO 11124-3-1997 |
用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第3部分:高碳铸钢喷丸及砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993); German version EN ISO 11124-3:1997) |
DIN EN ISO 11124-4-1997 |
用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第4部分:低碳铸钢喷丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997) |
DIN EN ISO 11125-1-1997 |
涂料及相关产品应用前钢衬垫的制备.金属喷砂清理磨料的试验方法.第1部分:取样 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997) |
DIN EN ISO 11125-2-1997 |
涂料及相关产品应用前钢衬垫的制备.金属喷砂清理磨料的试验方法.第2部分:粒度分布的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997) |
DIN EN ISO 11125-3-1997 |
涂料及相关产品应用前钢衬垫的制备.金属喷砂清理磨料的试验方法.第3部分:硬度的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997) |
DIN EN ISO 11125-4-1997 |
涂料及相关产品应用前钢衬垫的制备.金属喷砂清理磨料的试验方法.第4部分:表观密度的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997) |
DIN EN ISO 11125-5-1997 |
涂料和相关产品应用前钢衬底的制备.金属喷沙清理磨料的试验方法.第1部分:有缺陷的颗粒和微结构的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN I |
DIN EN ISO 11125-6-1997 |
涂料和相关产品应用前钢衬底的制备.金属喷沙清理磨料的试验方法.第1部分:外来杂质的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997) |
DIN EN ISO 11125-7-1997 |
涂层材料涂层前钢表面的预处理.金属喷丸的检验方法.第7部分:湿度测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997) |
DIN EN ISO 11126-1-1997 |
用涂层材料涂覆前钢表面的准备工作.非金属喷射清洁材料的要求.第1部分:一般介绍和分类 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
DIN EN ISO 11126-3-1997 |
用涂层材料涂覆前钢表面的准备工作.非金属喷射清洁材料的要求.第3部分:炼铜熔渣制喷丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997) |
DIN EN ISO 11126-4-1998 |
用涂层材料涂覆前钢表面的准备工作.非金属喷射清洁材料的要求.第4部分:熔渣制钢丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993); German version EN ISO 11126-4:1998) |
DIN EN ISO 11126-5-1998 |
用涂层材料涂覆前钢表面的准备工作.非金属喷射清洁材料的要求.第5部分:炼镍熔渣制喷丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993); German version EN ISO 11126-5:1998) |
DIN EN ISO 11126-6-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第6部分:铁炉熔渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997) |
DIN EN ISO 11126-7-1999 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第7部分:熔氧化铝 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999) |
DIN EN ISO 11126-8-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第8部分:橄榄石沙 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997) |
DIN EN ISO 11127-1-1997 |
涂料和相关产品应用之前钢衬底的制备.非金属喷砂清理磨料的试验方法.第1部分:抽样 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993); German version EN ISO 11127-1:1997) |
DIN EN ISO 11127-2-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第2部分:粒度分布的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997) |
DIN EN ISO 11127-3-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第3部分:表观密度的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997) |
DIN EN ISO 11127-4-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第4部分:通过玻璃划痕试验对硬度的评估 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997) |
DIN EN ISO 11127-5-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第5部分:潮湿度的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997) |
DIN EN ISO 11127-6-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第6部分:通过电导率测量对水溶污染的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German versio |
DIN EN ISO 11127-7-1997 |
涂料和相关产品应用前钢衬底的制备.非金属喷沙清理磨料的试验方法.第7部分:对水溶氯化物的测定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997) |
DIN EN ISO 11130-1999 |
金属与合金的腐蚀性.盐溶液中反复腐蚀试验 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999); German version EN ISO 11130:1999) |
DIN EN ISO 11143-2002 |
牙科设备.汞齐合金分离器 |
(Dental equipment - Amalgam separators (ISO 11143:1999 + Cor.1:2002) (includes corrigendum AC:2002); German version EN ISO 11143:1999 + AC:2002) |
DIN EN ISO 11144-1996 |
牙科设备.给排水管接头 |
(Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996) |
DIN EN ISO 11145-2002 |
光学和光学仪器.激光和有关的激光设备.词汇和符号 |
(Optics and optical instruments - Laser and laser-related equipment - Vocabulary and symbols (ISO 11145:2001); German version EN ISO 11145:2001) |
DIN EN ISO 11146-1999 |
激光和激光相关设备.激光束参数的试验方法.射线测量,离向角和射线传播系数 |
(Lasers and laser related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999); German version EN ISO 11146:1999) |
DIN EN ISO 11146-2-2005 |
激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束 |
|
DIN EN ISO 11146-2-2005 |
激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束 |
|
DIN EN ISO 11149-1997 |
光学和光学仪器.激光和激光相关设备.非电信激光应用的光纤接头 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser application (ISO 11149:1997); German version EN ISO 11149:1997) |
DIN EN ISO 11151-1-2000 |
激光和激光相关设备.标准光学件.第1部分:紫外线、可见光和近红外线光谱范围内件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000) |
DIN EN ISO 11151-2-2000 |
激光和激光相关设备.标准光学件.第2部分:红外线光谱范围内件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000) |
DIN EN ISO 1119-2003 |
产品几何量技术规范(GPS).锥度和锥度角系列 |
(Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002) |
DIN EN ISO 11196-1997 |
麻醉气体用监测器 |
(Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997); German version EN ISO 11196:1997) |
DIN EN ISO 11197-2005 |
医疗供电设备 |
|
DIN EN ISO 11199-1-2000 |
双臂操作的助步器.要求和试验方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999); German version EN ISO 11199-1:1999) |
DIN EN ISO 11199-2-2000 |
双臂操作的助步器.要求和试验方法.第2部分:滚动器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999); German version EN ISO 11199-2:1999) |
DIN EN ISO 11199-2-2005 |
双臂操作的助步器.要求和试验方法.第2部分:滚动器 |
|
DIN EN ISO 1120-2002 |
传送带.机械紧固件强度测定.静态试验方法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002); German version EN ISO 1120:2002) |
DIN EN ISO 11200-1996 |
声学.机械和设备发出的噪声.在工作站和其他特定位置发射声压级测定基本标准导则 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995); German version EN ISO 11200:1995 |
DIN EN ISO 11201-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所辐射声压级的测量.反射平面上基本自由声区用2级精度 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; engineering method in an essentially free field over a reflecting plane (ISO 11201:1995); German vers |
DIN EN ISO 11202-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所辐射声压级的测量.在使用条件下测量的3级精度方法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; survey method in situ (ISO 11202:1995); German version EN ISO 11202:1995) |
DIN EN ISO 11203-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它声功率级试验场所的辐射声压级测量 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:1995) |
DIN EN ISO 11204-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所的辐射声压级测量.环境改善法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; method requiring environmental corrections (ISO 11204:1995); German version EN ISO 11204:1995) |
DIN EN ISO 11205-2004 |
声学.机械和设备发出的噪音.使用声强现场测定工作位和其它特殊位置的声压级别的工程方法 |
|
DIN EN ISO 11210-1995 |
铂装饰合金中铂量测定.用六氯铂酸二铵沉淀作重力测定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995); German version EN ISO 11210:1995) |
DIN EN ISO 11212-1-1997 |
淀粉和淀粉制品.重金属含量.第1部分:用原子吸收光谱法测定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997); German version EN ISO 11212-1:1997) |
DIN EN ISO 11212-2-1997 |
淀粉和淀粉制品.重金属含量.第2部分:用原子吸收光谱法测定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997); German version EN ISO 11212-2:1997) |
DIN EN ISO 11212-3-1997 |
淀粉和淀粉制品.重金属含量.第3部分:用带电热原子分裂的原子吸收光谱法测定铅含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997); German version EN ISO 11212-3:1997) |
DIN EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金属含量.第4部分:用带电热原子分裂的原子吸收光谱法测定镉含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997); German version EN ISO 11212-4:1997) |
DIN EN ISO 11213-1995 |
淀粉和淀粉制品的检验.用酶催化法测定淀粉的乙酰基的含量 |
(Modified starch - Determination of acetyl content - Enzymatic method (IS0 11213:1995); German version EN ISO 11213:1995) |
DIN EN ISO 11214-1996 |
改进的淀粉.氧化淀粉中羟基团含量的测定 |
(Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996); German version EN ISO 11214:1996) |
DIN EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的测定.气相色谱法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998); German version EN ISO 11215:1998) |
DIN EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基团含量的测定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998); German version EN ISO 11216:1998) |
DIN EN ISO 11244-1999 |
牙科用钎焊包埋料 |
(Dental brazing investments (ISO 11244:1998); German version EN ISO 11244:1999) |
DIN EN ISO 11245-2000 |
牙齿修复.磷酸盐粘结耐火模铸材料 |
(Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999); German version EN ISO 11245:2000) |
DIN EN ISO 11246-1999 |
牙科硅酸乙脂粘接铸造包埋料 |
(Dental ethyl silicate bonded casting investments (ISO 11246:1996); German version EN ISO 11246:1998) |
DIN EN ISO 11248-1999 |
塑料.热塑材料.高温下短期特性的评定 |
(Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999) |
DIN EN ISO 11254-1-2000 |
激光和激光相关设备.光学表面激光诱导损伤阈的测定.第1部分:1-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000) |
DIN EN ISO 11254-2-2002 |
激光和激光相关设备.光学表面激光诱导损伤阈的测定.第2部分:S-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001) |