标准号 |
中文名称 |
英文名称 |
| prEN 2349-318-2000 |
航空航天系列 继电器和接触器要求和试验程序 第318部分：高温下启动电压和低温下释放电压 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature |
| prEN 2349-319-2000 |
航空航天系列 继电器和接触器要求和试验程序 第319部分：失配试验 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 319: Miss test |
| prEN 2349-402-2000 |
航空航天系列 继电器和接触器要求和试验程序 第402部分：腐蚀和盐雾试验 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray扎 |
| prEN 2349-405-2000 |
航空航天系列 继电器和接触器要求和试验程序 第405部分：耐流体腐蚀性 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance |
| prEN 2349-407-2000 |
航空航天系列 继电器和接触器要求和试验程序 第407部分：冷/低压潮热 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat |
| prEN 2349-409-2000 |
航空航天系列 继电器和接触器要求和试验程序 第409部分：耐臭氧腐蚀性 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance |
| prEN 2349-410-2000 |
航空航天系列 继电器和接触器要求和试验程序 第410部分：模具 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould |
| prEN 2349-411-2000 |
航空航天系列 继电器和接触器要求和试验程序 第411部分：温度变化 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change |
| prEN 2349-412-2000 |
航空航天系列 继电器和接触器要求和试验程序 第412部分：密封 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal |
| prEN 2349-413-2000 |
航空航天系列 继电器和接触器要求和试验程序 第413部分：正弦和随机振动 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random |
| prEN 2349-414-2000 |
航空航天系列 继电器和接触器要求和试验程序 第414部分：机械冲击 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock |
| prEN 2349-415-2000 |
航空航天系列 继电器和接触器要求和试验程序 第415部分：加速度 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration |
| prEN 2349-601-2000 |
航空航天系列 继电器和接触器要求和试验程序 第601部分：周围安全距离 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance |
| prEN 236-1985 |
计算机程序语言Pascal |
Computer programming language Pascal |
| prEN 237-2001 |
液态石油产品 汽油 原子吸收光谱法测定低铅浓度 |
Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| prEN 2403-1998 |
标准号： |
中文标题： |
| prEN 2405-1998 |
标准号： |
中文标题： |
| prEN 2415-1982 |
航空航天系列 镀镉合金钢制开槽/槽顶六角螺母 分类 900 MPa/235 ℃ |
Aerospace series; nuts, hexagon, slotted/castellated, thin, in steel, cadmium plated; classification 900 MPa/235℃ |
| prEN 2419-1999 |
航空航天系列 铝合金AL-P2024-T351 板材 6 mm≤ a ≤ 80 mm |
Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm ≤ a ≤ 80 mm |
| prEN 2434-01-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂光洁度 第01部分：基本要求 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 01: Basic requirements |
| prEN 2434-02-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂光洁度 第02部分：高的耐化学腐蚀能力 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 02: High chemical resistance |
| prEN 2434-03-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂光洁度 第03部分：针对内部灵活的和强耐液体性 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 03: Flexible and high fluid resistance for interior |
| prEN 2434-04-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂末光洁度 第04部分：高弹性 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 04: High flexibility |
| prEN 2435-02-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第4部分：强耐腐蚀性 |
Aerospace series - Paints and varnishes; Corrosion resistant chromated two component cold curing primer - Part 02: High corrosion resistance |
| prEN 2435-03-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第03部分：强耐腐蚀性和耐液体性 |
Aerospace series - Paints and varnishes; Corrosion resistant chromated two component cold curing primer - Part 03: High corrosion and fluid resistance |
| prEN 2435-04-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第04部分：有表面预加工公差的强耐腐蚀性和耐 |
Aerospace series - Paints and varnishes; Corrosion resistant chromated two component cold curing primer - Part 04: High corrosion and fluid resistance with surface preparation tolerance |
| prEN 2436-01-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第01部分：基本要求 |
Aerospace series - Paints and varnishes; Corrosion resistant chromate-free two component cold curing primer - Part 01: Basic requirements |
| prEN 2436-02-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第02部分：强耐腐蚀性 |
Aerospace series - Paints and varnishes; Corrosion resistant chromate-free two component cold curing primer - Part 02: High corrosion resistance |
| prEN 2436-04-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第04部分： 有表面预加工公差的强耐腐蚀性和 |
Aerospace series - Paints and varnishes; Corrosion resistant chromate-free two component cold curing primer - Part 04: High corrosion and fluid resistance with surface preparation tolerance |
| prEN 2436-05-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第05部分：有表面预加工公差的外部使用 |
Aerospace series - Paints and varnishes; Corrosion resistant chromate-free two component cold curing primer - Part 05: For exterior use with surface preparation tolerance |
| prEN 244-1985 |
脚手架和工作架用4mm壁厚钢管 要求、试验 |
Steel tubes with 4 mm wall thickness for falsework and working scaffolds; requirements, tests |
| prEN 2485-1998 |
航空航天系列 铝合金AL-P2214 锻坯 |
Aerospace series - Aluminium alloy AL-P2214 - Forging stock |
| prEN 2486-1998 |
航空航天系列 铝合金AL-P2618A 锻坯 |
Aerospace series - Aluminium alloy AL-P2618A - Forging stock |
| prEN 2496-1983 |
航空航天系列 操纵缆绳滑轮车用球轴承 尺寸和负载 |
Aerospace series; bearings, ball for control cable pulleys; dimensions and loads |
| prEN 2546-2002 |
航空航天系列 飞行操纵杆用带径向锯齿锁紧钝化耐腐蚀钢垫圈 尺寸 |
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions |
| prEN 2549-1999 |
标准号： |
中文标题： |
| prEN 255-6-1992 |
热力泵 用于加热或加热和制冷的带电驱动压缩机热力泵组 第6部分：用于加热卫生间热水的热力泵组 测试、 |
Heat pumps; heat pump units with electrically driven compressors used for heating or for heating and cooling; part 6: heat pump units for heating sanitary water; testing, definitions and requirements for marking |
| prEN 255-7-1992 |
热力泵 带电驱动压缩机的热力泵组 第7部分：用于加热卫生间热水的热力泵组和热力泵 空中噪音的测量 噪 |
Heat pumps; heat pump units with electrically driven compressors; part 7: heat pump units and heat pumps for heating sanitary water; measurements of airborne noise; determination of the sound power level |
| prEN 255-8-1992 |
热力泵 带电驱动压缩机的热力泵组 第8部分：用于加 热卫生间热水的热力泵组和热力泵 要求 |
Heat pumps; heat pump units with electrically driven compressors; part 8: heat pump units and heat pumps for heating sanitary water; requirements |
| prEN 2550-1999 |
航空航天系列1050A型铝制100°沉头实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head, in aluminium 1050A, inch based series |
| prEN 2551-1999 |
航空航天系列2117型铝合金制100°沉头圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, inch based series |
| prEN 2552-1999 |
航空航天系列阳极氧化或铬酸盐表面处理的2117型铝合金100°沉头圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| prEN 2553-1999 |
航空航天系列2017A型铝合金制100°沉头圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2017A, inch based series |
| prEN 2555-1999 |
航空航天系列5056A型铝合金制100°沉头圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, inch based series |
| prEN 2556-1999 |
航空航天系列阳极氧化或铬酸盐表面处理的5056A型铝合金制 100°沉头圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| prEN 256-1990 |
冷水仪表用设备的试验方法 |
Test methods and equipment for cold water meters |
| prEN 258-1988 |
牙科 牙齿铸件金合金 |
Dentistry; dental casting gold alloys |
| prEN 2588-2001 |
航空航天系列轴承带装配槽的耐腐蚀钢球形滑动轴承 尺寸和负荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads |
| prEN 2591-100-2001 |
航空航天系列光电连接件试验方法第１００部分：总则 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 100: General |
| prEN 2591-212-2000 |
航空航天系列光电连接件试验方法第212部分：表面传输阻抗 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 212: Surface transfer impedance |
| prEN 2591-214-2000 |
航空航天系列光电连接件试验方法第214部分：雷击、电流和电压脉冲 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 214: Lightning strike, current and voltage pulse |
| prEN 2591-220-2000 |
航空航天系列光电连接件试验方法第２２０部分：电流和温度循环变化使接触端／导线接头老化 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| prEN 2591-423-2001 |
航空航天系列光电连接件试验方法第423部分：连接器背面附件螺丝强度注与EN 2591-100结合使用 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 423: Connector rear accessories thread strength / Note: Applies in conjunction with EN 2591-100 |
| prEN 2591-609-1999 |
航空航天系列光电连接件试验方法第609部分：光学件 电缆附件的效能电缆循环可绕性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| prEN 2596-2002 |
航空航天系列镀镉不锈钢径向锯齿形花键飞行器操纵杆锁紧垫圈尺寸 |
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel, cadmium plated - Dimensions |
| prEN 260-1988 |
牙科 牙齿接片 接合尺寸 |
Dentistry; dental handpieces; coupling dimensions |
| prEN 2608-1999 |
标准号： |
中文标题： |
| prEN 261-1988 |
牙科 瓷制假牙 |
Dentistry; porcelain denture teeth |
| prEN 2635-1998 |
航空航天系列 Al-P2014A-T6511铝合金 a 或D≤200 mm的周围有粗粒控制的挤压杆和部件 |
Aerospace series - Aluminium alloy Al-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm - With peripheral coarse grain control |
| prEN 2646-1998 |
航空航天系列镀镉钢制轴式加油咀 |
Aerospace series - Nipples, lubricating, axial type, in steel, cadmium plated |
| prEN 2647-1997 |
标准号： |
中文标题： |
| prEN 2680-1998 |
标准号： |
中文标题： |
| prEN 2681-1998 |
标准号： |
中文标题： |
| prEN 2682-1998 |
标准号： |
中文标题： |
| prEN 2683-1998 |
标准号： |
中文标题： |
| prEN 2686-1998 |
标准号： |
中文标题： |
| prEN 2688-1998 |
标准号： |
中文标题： |
| prEN 2690-1998 |
标准号： |
中文标题： |
| prEN 2702-1998 |
航空航天系列AL-P6061-T6或T62铝合金拔拉或挤压杆和型材 a 或 D ≤ 150 mm |
Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 150 mm |
| prEN 2713-002-2000 |
航空航天系列一般用途的单芯和多芯电缆工作温度在－55℃和200℃之间 第002部分：屏蔽和护套 通用 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: Screened and jacketed - General |
| prEN 2713-011-2000 |
航空航天系列一般用途的单芯和多芯电缆工作温度在－55℃和260℃之间 第011部分：屏蔽（螺旋）和护套 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
| prEN 2714-002-2000 |
航空航天系列一般用途的单芯和多芯电缆工作温度在－55℃和260℃之间 第002部分：屏蔽和护套通用 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: Screened and jacketed - General |
| prEN 2714-011-1999 |
航空航天系列一般用途的单芯和多芯电缆工作温度在－55℃和260℃之间 第011部分：屏蔽（螺旋）和护套 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard |
| prEN 2714-012-1999 |
航空航天系列一般用途的单芯和多芯电缆工作温度在－55℃和260℃之间 第0012部分：屏蔽（编织的）和护 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard |
| prEN 2719-2001 |
航空航天系列聚碳酸酯板技术规范 |
Aerospace series - Polycarbonate sheet - Technical specification |
| prEN 2726-2001 |
标准号： |
中文标题： |
| prEN 2728-2001 |
标准号： |
中文标题： |
| prEN 2823-1998 |
航空航天系列纤维增强塑料暴露于潮湿环境对物理和机械性能影响的测定 |
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics |
| prEN 2833-1-1997 |
航空航天系列玻璃纤维增强热固预浸渍物技术规范第１部分：一般要求 |
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 1: General requirements |
| prEN 2833-3-1997 |
航空航天系列玻璃纤维热固预浸渍物技术规范第３部分：塑化温度达180 ℃ 、持续使用达120℃玻璃纤维／ |
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 3: Glass fabric/epoxy resin preimpregnate curing at up to 180℃ for continuous use up to 120℃ |
| prEN 2833-4-1997 |
航空航天系列玻璃纤维热固预浸渍物技术规范第４部分：塑化温度达125 ℃、持续使用达 80 ℃单向玻璃／ |
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 4: Unidirectional glass/epoxy resin preimpregnate curing at up to 125℃ for continuous use up to 80℃ |
| prEN 2833-5-2001 |
航空航天系列玻璃纤维热固预浸渍物技术规范第５部分：玻璃纤维／酚醛树脂预浸渍物 |
Aerospace series - Glass fibre thermosetting preimpregnates; Technical specification - Part 5: Glass fabric/phenolic resin preimpregnate |
| prEN 2850-1997 |
航空航天系列碳纤维增强热固树脂单向叠层板平衡纤维方向的压缩测试 |
Aerospace series - Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction |
| prEN 2853-1998 |
航空航天系列带EN2083导体的电缆的电流额定值 |
Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
| prEN 2858-1-1993 |
航空航天系列钛和钛合金锻坯和锻件技术规范第１部分：一般要求 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 1: general requirements |
| prEN 2858-2-1993 |
航空航天系列钛和钛合金锻坯和锻件技术规范第２部分：锻坯 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock |
| prEN 2858-3-1993 |
航空航天系列钛和钛合金锻坯和锻件技术规范第３部分：锻件预生产和生产 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings |
| prEN 2859-1999 |
航空航天系列镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级：1100MPa(环境温度)/235℃ |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| prEN 287-1-2003 |
焊工的认可试验熔焊第1部分：钢 |
Qualification test of welders - Fusion welding - Part 1: Steels / Note: Intended as replacement for EN 287-1 (1992-02). |
| prEN 287-3-1995 |
焊机的合格性测试 熔焊 第3部分：铜和铜合金（ISO/DIS 9606-3:1995） |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO/DIS 9606-3:1995) |
| prEN 287-4-1995 |
焊机的合格性测试 熔焊 第4部分：镍和镍合金 （ISO/DIS 9606-4:1995） |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO/DIS 9606-4:1995) |
| prEN 2878-1998 |
标准号： |
中文标题： |
| prEN 2879-1998 |
标准号： |
中文标题： |
| prEN 288-10-1994 |
金属材料焊接程序规范和鉴定 第10部分：电子束焊的焊接程序规范 |
Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding |
| prEN 288-11-1994 |
金属材料焊接程序规范和鉴定 第11部分：激光束焊的焊接程序规范 |
Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding |
| prEN 288-12-1995 |
金属材料焊接程序规范和鉴定 第12部分：铸钢弧焊的焊接程序试验（ISO 9956-2:1995） |
Specification and approval of welding procedures for metallic materials - Part 12: Welding procedure tests for the arc welding of cast steels (ISO 9956-2:1995) |
| prEN 288-13-1995 |
金属材料焊接程序规范和鉴定 第13部分：铝和铸锻材料化合物弧焊的焊接程序试验 |
Specification and approval of welding procedures for metallic materials - Part 13: Welding procedure tests for the arc welding of aluminium and combinations of cast to wrought material (ISO 9956-3:1995) |
| prEN 2880-1998 |
标准号： |
中文标题： |
| prEN 2881-1998 |
标准号： |
中文标题： |
| prEN 2888-1999 |
航空航天系列 钝化耐腐蚀钢普通六角头紧公差普通柄短螺纹螺栓等级：600MPa (环境温度)/425℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| prEN 2889-1999 |
航空航天系列镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级：900 MPa（环境温度）235 ℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 289-2000 |
橡胶和塑料机械 压力机 安全要求 |
Rubber and plastics machines - Presses - Safety requirements |
| prEN 290-1991 |
消毒 蒸汽消毒器 大型消毒器 术语 |
Sterilization; steam sterilizers; big sterilizers; terminology |
| prEN 2947-1998 |
标准号： |
中文标题： |
| prEN 295-10-2001 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第10部分：强制要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Mandated requirements |
| prEN 2951-1997 |
航空航天系列金属材料测试方法非金属夹杂含量的显微测定 |
Aerospace series - Metallic materials - Test method - Micrographic determination of content of non-metallic inclusions |
| prEN 2995-001-1999 |
航空航天系列单极温度补偿额定电流1安到25安断路器 第001部分：技术规范 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification |
| prEN 2995-004-1999 |
航空航天系列 单极温度补偿额定电流1安到25安断路器第004部分：有信号连接和统一硬件设施 18 mm接线柱 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact and unified mounting hardware - Centre-to-centre distance of terminals 18 mm - Product standard |
| prEN 2995-005-1999 |
航空航天系列单极温度补偿额定电流1安到25安断路器第005部分：有极化的信号连接和统一硬件设施 18 mm |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact and unified mounting hardware - Centre-to-centre distance of terminals 18 mm - Product standard |
| prEN 2996-001-1999 |
航空航天系列三极温度补偿额定电流1安到25安断路器第001部分：技术规范 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification |
| prEN 2996-004-1999 |
航空航天系列三极温度补偿、额定电流1安到25安断路器 第004部分：有信号连接和统一硬件设施18 mm接线 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact and unified mounting hardware - Centre-to-centre distance of terminals 12,8 mm - Product standard |
| prEN 2996-005-1999 |
航空航天系列三极温度补偿、额定电流1安到25安断路器 第005部分：有极化的信号连接和统一硬件设施 18 m |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact and unified mounting hardware - Centre-to-centre distance of terminals 12,8 mm - Product standard |
| prEN 301-2001 |
承重木结构用胶接酚醛塑料和氨基塑料 分类和性能要求 |
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| prEN 302-1-2000 |
承重木结构用胶粘剂 试验方法 第1部分：纵向抗拉伸剪切的粘结强度的测定 |
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of the longitudinal tensile shear strength |
| prEN 302-2-2001 |
承重木结构用胶粘剂 试验方法 第2部分：抗剥离性测定(实验室法) |
Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination |
| prEN 302-3-2001 |
承重木结构用胶粘剂 试验方法 第3部分：通过温度和湿度循环试验测定酸性腐蚀对木纤维横向拉伸强度的影响 |
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| prEN 302-4-2001 |
承重木结构用胶粘剂 试验方法 第4部分：木材收缩对剪切强度影响的测定 |
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| prEN 302-6-2001 |
承重木结构用胶粘剂 试验方法 第6部分：常规压干时间的测定 |
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time |
| prEN 302-7-2001 |
承重木结构用胶粘剂 试验方法 第7部分：常规工作寿命的测定 |
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life |
| prEN 30306-1994 |
纺织品 棉纤维 成熟度的气流法评定 |
Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com