标准号 |
中文名称 |
英文名称 |
EN 60851-2/prA2-2003 |
绕组线试验方法第2部分:尺寸测定 修改草案2 |
Amendment 2 to IEC 60851-2, Ed. 2: Winding wires - Test methods - Part 2: Determination of dimensions; Clause 3: Test 4 dimensions |
EN 60851-3/prA2-2003 |
绕组线试验方法第3部分:机械性能 修改草案2 |
Amendment 2 to IEC 60851-3, Ed. 2: Winding wires - Test methods - Part 3: Mechanical properties; Clause 5: Test 8 Flexibility and adherence; Clause 7: Test 18 Heat bonding |
EN 60851-5/prA2-2002 |
绕组线试验方法第5部分:电性能 修改草案2 |
Amendment 2 to IEC 60851-5, Ed. 3: Winding wires - Test methods - Part 5: Electrical properties |
EN 60851-6-2004 |
绕组线.试验方法.第6部分:热性能 |
|
EN 60851-6/prA2-2003 |
绕组线试验方法第6部分:热性能 修改草案2 |
Amendment 2 to IEC 60851-6: Winding wires - Test methods - Part 6: Thermal properties |
EN 60852-4-1996 |
电信和电子设备用变压器和电感器的外形尺寸第4部分:使用YUI-2型铁芯片的变压器和电感器 |
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations (IEC 60852-4:1996) |
EN 60855-1996 |
带电作业用绝缘泡沫材料填充管和实心棒 |
Insulating foam-filled tubes and solid rods for live working (IEC 60855:1985, modified) |
EN 60862-1-2003 |
经质量评定的表面声波(SAW)滤波器第1部分:通用规范 |
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (IEC 60862-1:2003) / Note: Endorsement notice |
EN 60862-2-2002 |
经质量评定的表面声波(SAW)滤波器第2部分:使用指南 |
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use (IEC 60862-2:2002) / Note: Endorsement notice |
EN 60864-2-1997 |
广播发射机或发射机系统和监督设备之间互连的标准化第2部分:使用数据总线互连的系统接口标准 |
Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections (IEC 60864-2:1997) |
EN 60865-1-1993 |
短路电流效应的计算第1部分:定义和计算方法 |
Short-circuit currents; Calculation of effects; Part 1: Definitions and calculation methods (IEC 60865-1:1993) |
EN 60867-1994 |
绝缘液体以合成芳香烃为的未使用过的液体规范 |
Insulating liquids - specifications for unused liquids based on synthetic aromatic hydrocarbons (IEC 60867:1993) |
EN 60868-0-1993 |
闪变计0部分:闪变度评估 |
Flickermeter; Part 0: Evaluation of flicker severity (IEC 60868-0:1991) |
EN 60868-1993 |
闪变计功能和设计规范 |
Flickermeter; Functional and design specifications (IEC 60868:1986 + A1:1990) |
EN 60869-1-2000 |
纤维光学衰减器第1部分:一般规范 |
Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999) |
EN 60870-2-1-1996 |
遥控设备和系统第2部分:操作条件第1节:电源和电磁兼容性 |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility (IEC 60870-2-1:1995) |
EN 60870-2-2-1996 |
遥控设备和系统第2部分:使用条件第2节:环境条件(气候的、机械的及其它非电气条件的影响) |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) (IEC 60870-2-2:1996) |
EN 60870-5-1-1993 |
遥控设备和系统第5部分:传输协议第1节:传输框架格式 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 1: Transmission frame formats (IEC 60870-5-1:1990) |
EN 60870-5-101-2003 |
遥控设备和系统第5-101部分:传输协议基本遥控任务的配套标准 |
Telecontrol equipment and systems - Part 5-101: Transmission protocols; Companion standard for basic telecontrol tasks (IEC 60870-5-101:2003) / Note: Endorsement notice |
EN 60870-5-102-1996 |
遥控设备和系统第5部分:传输协议第102部分:总电力系统中累计总量传输的配套标准 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems (IEC 60870-5-102:1996) |
EN 60870-5-103-1998 |
遥控设备和系统第5部分:传输协议第103部分:保护设备信息接口的配套标准 |
Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment (IEC 60870-5-103:1997) |
EN 60870-5-104-2001 |
遥控设备和系统第5部分:传输协议第104部分:使用标准传输轮廓的IEC 60870-5-101所列标准的网络存 |
Telecontrol equipment and systems - Part 5-104: Transmission protocols; Network access for IEC 60870-5-101 using standard transport profiles (IEC 60870-5-104:2000) |
EN 60870-5-2-1993 |
遥控设备和系统第5部分:传输协议第2节:链路传输规程 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures (IEC 60870-5-2:1992) |
EN 60870-5-3-1992 |
遥控设备和系统第5部分:传输协议第3节:应用数据通用结构规范 |
Telecontrol equipment and systems; part 5: transmission protocols; section 3: general structure of application data (IEC 60870-5-3:1992) |
EN 60870-5-4-1993 |
遥控设备和系统第5部分:传输协议第4节:应用信息素的定义和编码 |
Telecontrol equipment and systems; part 5: transmission protocols; section 4: definition and coding of application information elements (IEC 60870-5-4:1993) |
EN 60870-5-5-1995 |
遥控设备和系统第5部分:传输协议第5节:基本应用功能 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions (IEC 60870-5-5:1995) |
EN 60870-6-2-1995 |
遥控设备和系统第6部分:与ISO标准和ITU-T推荐标准建议兼容的远动规约第2节:基本标准的使用(OSI层1- |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4) (IEC 60870-6-2:1995) |
EN 60870-6-501-1996 |
遥控设备和系统第6部分:与ISO标准和ITU-T推荐标准建议兼容的远动规约第501节:TASE.1服务 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 service definitions (IEC 60870-6-501:1995) |
EN 60870-6-502-1996 |
遥控设备和系统第6部分:与ISO标准和ITU-T推荐规程一致的遥控协议第502节:TASE.1协议规范 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 502: TASE.1 protocol definitions (IEC 60870-6-502:1995) |
EN 60870-6-503-2002 |
遥测设备和系统第6部分:符合ISO标准和ITU-T推荐标准一致的远程控制协议第503节:TASE.2服务和协议 |
Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO Standards and ITU-T Recommendations; TASE.2 services and protocol (IEC 60870-6-503:2002) / Note: Endorsement notice |
EN 60870-6-601-1995 |
遥控设备和系统第6部分:与ISO标准和ITU-T推荐规程一致的遥控协议第601节:在通过永久性接入与分组 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional profile for providing the connection-oriented transport service in end system connected via permanent acce |
EN 60870-6-701-1998 |
遥控设备和系统第6-701部分:与ISO标准和ITU-T推荐一致的遥控协议在终端系统中提供TASE.1应用服务 |
Telecontrol equipment and system - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems (IEC 60870-6-701:1998) |
EN 60870-6-702-1998 |
遥控设备和系统第6-702部分:与ISO标准和ITU-T推荐规程一致的遥控协议提供终端系统用TASE.2应用服 |
Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems (IEC 60870-6-702:1998) |
EN 60870-6-802-2002 |
遥测设备和系统第6部分:符合ISO标准和ITU-T推荐标准的远程控制协议第802节:TASE.2目标模式 |
Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO Standards and ITU-T Recommendations; TASE.2 Object models (IEC 60870-6-802:2002) / Note: Endorsement notice |
EN 60871-1-1997 |
额定电压超过1kV的交流电力系统用并联电容器第1部分:总则性能、试验和额定安全要求安装和运行指南 |
Shunt capacitors for a.c. power systems having a rated voltage above 1kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60871-1:1997) |
EN 60871-4-1996 |
额定电压1kV以上的交流电力系统用分路电容器第4部分:内部熔丝 |
Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - Part 4: Internal fuses (IEC 60871-4:1996) |
EN 60872-1-1998 |
船舶导航和无线电通信设备和系统雷达标图装置第1部分:自动雷达标图装置(ARPA)试验方法和要求的试验 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results (IEC 60872-1:1998) |
EN 60872-2-1999 |
船舶导航和无线电通信设备和系统雷达标图装置第2部分:自动跟踪标图装置 (ATA)试验方法和要求的试验 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results (IEC 60872-2:1999) |
EN 60872-3-2001 |
船舶导航和无线电通信设备和系统雷达标图装置第3部分:电子标绘仪(EPA)性能要求测试方法和要求 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA); Performance requirements; Methods of testing and required test results (IEC 60872-3:2000) |
EN 60873-1-2004 |
工业过程控制系统用电动和气动模拟图表记录仪.第1部分:性能评价方法 |
|
EN 60873-1993 |
工业过程控制系统用电动和气动模似图表记录仪的性能评定方法 |
Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems (IEC 60873:1986, modified) |
EN 60873-2-2004 |
工业过程控制系统用电动和气动模拟图表记录仪.第2部分:检验指南和常规试验 |
|
EN 60874-1-1999 |
光纤和光缆连接器第1部分:通用规范 |
Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:1999) |
EN 60874-17-1997 |
光纤和电缆的接头第17部分:纤维光学接头的部分规范F-05型(磨擦锁定) |
Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
EN 60874-19-1997 |
光纤光缆连接器材第19-1部分:光纤连接器分规范SC-D型(双总) |
Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(duplex) (IEC 60874-19:1995 + corrigendum 1996) |
EN 60875-1-1-1998 |
纤维光学分流装置第1-1部分:空白详细规格 |
Fibre optic branching devices - Part 1-1: Blank detail specification (IEC 60875-1-1:1996) |
EN 60875-1-2001 |
纤维光学分流装置第1部分:总规范 |
Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2000) |
EN 60876-1-2001 |
纤维光学开关第1部分:总规范 |
Fibre optic spatial switches - Part 1: Generic specification (IEC 60876-1:2001) |
EN 60885-2-2003 |
电缆的电气试验方法第2部分:局部放电试验 |
Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice |
EN 60885-3-2003 |
电缆的电气试验方法第3部分:局部放电试验挤压电力电缆段局部放电测量的试验方法 |
Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice |
EN 60889-1997 |
架空线导线用硬拉制铝线 |
Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987) |
EN 60891-1994 |
对晶体硅光电器件测量特性I-V的温度修正和辐照度修正的方法 |
Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices (IEC 60891:1987 + A1:1992) |
EN 60893-1-1994 |
电工用热固性树脂基工业刚性层压板规范第1部分:定义、名称和一般要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1:1987) |
EN 60893-1-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第1部分:定义、名称和一般要求 |
|
EN 60893-2-1994 |
电工用热固性树脂基工业刚性层压板规范第2部分:试验方法 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:1992) |
EN 60893-2-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第2部分:试验方法 |
|
EN 60893-3-1-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-1部分:专用材料规范.对工业硬质层压片类型的要求 |
|
EN 60893-3-2-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-2部分:专用材料规范.对环氧树脂硬质层压片的要求 |
|
EN 60893-3-3-1995 |
电工用热固性树脂基工业刚性层压板规范第3部分:专用材料规范活页3:对三聚氰胺树 脂硬质层压片的要 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:1993) |
EN 60893-3-3-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-3部分:专用材料规范.对三聚氰胺树脂硬质层压片的要求 |
|
EN 60893-3-4-1995 |
电工用热固性树脂基工业刚性层压板规范第3部分:专用材料规范活页4:酚醛树脂基刚性层压板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:1993) |
EN 60893-3-4-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-4部分:专用材料规范.对酚醛树脂硬质层压片的要求 |
|
EN 60893-3-5-1995 |
电工用热固性树脂基工业刚性层压板规范第3部分:专用材料规范活页5:聚酯树脂基刚性层压薄板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:1993) |
EN 60893-3-5-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-5部分:专用材料规范.对聚酯树脂硬质层压片的要求 |
|
EN 60893-3-6-1995 |
电工用热固性树脂基工业刚性层压板规范第3部分:专用材料规范活页6:对硅氧烷树脂基刚性层压板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:1993) |
EN 60893-3-6-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-6部分:专用材料规范.对硅树脂硬质层压片的要求 |
|
EN 60893-3-7-1995 |
电工用热固性树脂基工业刚性层压板规范第3部分:专用材料规范活页7:聚酰亚胺树脂基刚性层压薄板的要 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:1994) |
EN 60893-3-7-2004 |
绝缘材料.电工用热固性树脂工业硬质层压片.第3-7部分:专用材料规范.对聚酰亚胺树脂基硬质层压片的要求 |
|
EN 60895-1996 |
在标称交流电压达到800kV时带电作业用的导电衣着 |
Conductive clothing for live working at a nominal voltage up to 800 kV a.c. (IEC 60895:1987, modified) |
EN 60896-11-2003 |
固定铅酸蓄电池组第11部分:通风型通用要求和试验方法 |
Stationary lead-acid batteries - Part 11: Vented types; General requirements and methods of test (IEC 60896-11:2002) / Note: Endorsement notice |
EN 60896-2-1996 |
固定式铅酸蓄电池一般要求和试验方法第2部分:阀门调节型 |
Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types (IEC 60896-2:1995) |
EN 60896-21-2004 |
固定式铅酸蓄电池.第21部分:阀门调节型.试验方法 |
|
EN 60896-22-2004 |
固定式铅酸蓄电池.第22部分:阀门调节型.要求 |
|
EN 60898-1-2003 |
电气附件家用和类似用途电器过电流保护断路器 第1部分:交流运行用断路器 |
Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified) / Note: Endorsement notice*To be amended by EN 60898-1/prA1 (2003-07). |
EN 60898-2-2001 |
家用和类似用途电器过电流保护断路器规范第2部分:交流和直流操作的断路器 |
Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000) |
EN 609-1-1999 |
农业和林业机械 原木分裂机的安全 第1部分:楔子分裂机 |
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
EN 609-2-1999 |
农业和林业机械 原木分裂机的安全 第2部分:螺旋分裂机 |
Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
EN 60900-2004 |
带电作业.交流1000V和直流1500V及以下带电作业用手持工具 |
|
EN 60901-1996 |
单端荧光灯安全与性能要求 |
Single-capped fluorescent lamps - Performance specifications (IEC 60901:1996) |
EN 60901-2004 |
单端荧光灯.性能规范 |
|
EN 60903/prAA-1996 |
带电作业用绝缘材料手套和连指手套的规范修改AA |
Specification for gloves and mitts of insulating material for live working |
EN 60904-1-1993 |
光伏器件第1部分:光伏电流电压性能的测定 |
Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:1987) |
EN 60904-10-1998 |
光伏器件第10部分:线性测量方法 |
Photovoltaic devices - Part 10: Methods of linearity measurement (IEC 60904-10:1998) |
EN 60904-3-1993 |
光伏器件第3部分:具有标准光谱度数据的地面用阳光伏器件的测量原理 |
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 60904-3:1989) |
EN 60904-5-1995 |
光伏器件第5部分:用开路电压法测定光伏器件的等效电池温度 |
Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method (IEC 60904-5:1993) |
EN 60904-7-1998 |
光伏器件第7部分:光伏器件测试中引起的光谱失配误差的计算 |
Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device (IEC 60904-7:1998) |
EN 60904-8-1998 |
光伏器件第8部分:光伏器件光谱响应的测量 |
Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device (IEC 60904-8:1998) |
EN 60908-1999 |
激光唱片数字音响系统规范 |
Audio recording - Compact disc digital audio system (IEC 60908:1999) |
EN 60909-0-2001 |
三相交流系统短路第0部分:电流计算 |
Short-circuit currents in three-phase AC systems - Part 0: Calculation of currents (IEC 60909-0:2001) |
EN 60917-2-1-1995 |
电子设备用机械结构设计模型化规则第2部分:分规范25mm设备接口配合尺寸第1节:详细技术条件壳体和构 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabin |
EN 60917-2-1994 |
电子设备用机械结构设计模型化规则第2部分:分规范25mm设备的接口配合尺寸 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice (IEC 60917-2:1992) |
EN 60917-2-2-1996 |
电子设备用机械结构设计模型化规则第2部分:分规范25mm设备的接口配合尺寸第2节:详细规范分机柜、机 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subra- |
EN 60929-2004 |
管形荧光灯用交流供电电子镇流器.性能要求 |
|
EN 60931-2-1996 |
额定电压1000V及以下交流系统用非自动恢复性能型的并联电力电容器第2部分:老化试验和破坏性试验 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1kV - Part 2: Ageing test and destruction test (IEC 60931-2:1995) |
EN 60931-3-1996 |
额定电压1000V(包括1000V)以下的交流系统用非自动恢复型并联电力电容器第3部分:内部熔丝 |
Shunt power capacitors of non-self-healing type for a.c. systems having a rated voltage up to and including 1kV - Part 3: Internal fuses (IEC 60931-3:1996) |
EN 60933-3-1992 |
音频、视频和视听系统互连和匹配值第3部分:使用625行/50场制非复合信号ENG摄像机和便携式录像机的互 |
Audio, video and audiovisual systems; interconnections and matching values; part 3: interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems (IEC 60933-3:1992) |
EN 60933-4-1994 |
音频、视频和视听系统互连和匹配值第4部分:内部数字总线用连接器和接线点 |
Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) (IEC 60933-4:1994) |
EN 60933-5-1993 |
音频、视频和视听系统互连和匹配值第5部分:录像系统用Y/C连接器连接器的电匹配值和描述 |
Audio, video and audiovisual systems; interconnections and matching values-part 5: Y/C connector for video systems; electrical matching values and description of the connector (IEC 60933-5:1992) |
EN 60934-2001 |
设备断路器 |
Circuit-breakers for equipment (CBE) (IEC 60934:2000) |
EN 60936-1993 |
船用雷达使用方法和性能要求试验方法和要求的试验结果 |
Shipborne radar - Operational and performance requirements - Methods of test and required test results (IEC 60936:1988) |
EN 60936-2-1999 |
海上导航和无线电通信设备及系统雷达第2部分:用于高速飞行器(HSC)的船用雷达 试验方法和要求的试 |
Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results (IEC 60936-2:1998) |
EN 60936-3-2002 |
海上导航和无线电通信设备及系统雷达第部分:有海图设备的雷达性能要求、试验方法和要求的试验结果 |
Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radar with chart facilities; Performance requirements, methods of test and required test results (IEC 60936-3:2002) / Note: Endorsement notice |
EN 60938-1-1999 |
电磁干扰抑制用固定电感器第1部分:通用规范 |
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (IEC 60938-1:1999) |
EN 60938-2-1-1999 |
电磁干扰抑制用固定电感器第2-1部分:空白详细规范要求做安全试验的电感器 评估等级D |
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (IEC 60938-2:1999) |
EN 60938-2-1999 |
电磁干扰抑制用固定电感器第2部分:分规范 |
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification (IEC 60938-2:1999) |
EN 60938-2-2-1999 |
电磁干扰抑制用固定电感器第2-2部分:空白详细规范要求做安全试验的电感器 |
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) (IEC 60938-2-2:1999) |
EN 60942-2003 |
电声学声音校正器 |
Electroacoustics - Sound calibrators (IEC 60942:2003) / Note: Endorsement notice |
EN 60945-2002 |
海上导航和无线电通信设备及系统一般要求试验方法和要求的试验结果 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002) / Note: Endorsement notice |
EN 60947-1-2004 |
低压开关设备和控制设备.第1部分:总则 |
|
EN 60947-2-2003 |
低压开关和控制设备规范第2部分:断路器 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2003) / Note: Endorsement notice |
EN 60947-4-3-2000 |
低压开关设备和控制设备规范第4-3部分:接触器和电动机起动器非电动机负载用交流半导体控制器和接触器 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999) |
EN 60947-5-1-2004 |
低压开关设备和控制设备.第5-1部分:控制电路器件和切换件.机电控制电路器件 |
|
EN 60947-5-2-2004 |
低压开关设备和控制设备.第5-2部分:控制电路器件和切换件.接近开关 |
|
EN 60947-5-3-1999 |
低压开关设备和控制设备规范第5-3部分:控制电路器件和开关件在故障条件下具有规定功能的接近开关( |
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) (IEC 60947-5-3:1999) |
EN 60947-5-4-1997 |
低压开关设备和控制设备的规范第5部分:控制线路装置和开关件第4部分:低能量接触性能评估特殊试验 |
Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Methods of assessing the performance of low-energy contacts - Special tests (IEC 60947-5-4:1996) |
EN 60947-5-5-1997 |
低压开关设备和控制设备规范第5-5部分:控制线路设备和开关件具有机械锁扣功能的电气紧急故障中断器 |
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997) |
EN 60947-5-6-2000 |
低压开关设备和控制设备规范第5-6部分:控制电路器件和切换件接近传感器和切换放大器用直流连接器件 |
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6:1999) |
EN 60947-5-7-2003 |
低压开关装置和控制装置第5-7部分:控制电路设备和开关件带有模拟输出的临近设备的要求 |
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements; Requirements for proximity devices with analogue output (IEC 60947-5-7:2003) / Note: Endorsement notice |
EN 60947-6-2-2003 |
低压开关设备和控制设备第6-2部分:.多功能设备控制和保护开关器件(或设备)(CPS) |
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment; Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2002) / Note: Endorsement notice |
EN 60947-7-1-2002 |
低压开关和控制设备规范第7-1部分:辅助设备铜导线用接线端子板 |
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors (IEC 60947-7-1:2002) / Note: Endorsement notice |