标准号 |
中文名称 |
英文名称 |
| BS EN ISO 5810-1994 |
淀粉及其制品.氯化物含量的测定.电位测量法 |
(Starches and derived products - Determination of chloride content - Potentiometric method) |
| BS EN ISO 5817-2003 |
焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺点质量分级 |
(Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections) |
| BS EN ISO 5826-2003 |
电阻焊设备.变压器.适用于各种变压器的一般规范 |
(Resistance welding equipment - Transformers - General specifications applicable to all transformers) |
| BS EN ISO 5828-2001 |
电阻焊设备.终端水冷系统连接的二级电缆.尺寸和特性 |
(Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics) |
| BS EN ISO 583-1-2000 |
带织物架的传送带.整个厚度和件厚度.试验方法 |
(Conveyor belts with a textile carcass - Total thickness and thickness of elements - Methods of test) |
| BS EN ISO 584-1998 |
塑料.不饱和聚酯树脂.80℃时的反应性测定(常规方法) |
(Plastics - Unsaturated polyester resins - Determination of reactivity at 80 鳦 (conventional method)) |
| BS EN ISO 5845-1-1999 |
技术制图.零件与紧固件组配的简化表示.通则 |
(Technical drawings - Simplified representation of the assemby of parts with fasteners - General principles) |
| BS EN ISO 591-1-2000 |
涂料用二氧化钛颜料.规范和试验方法 |
(Titanium dioxide pigments for paints - Specifications and methods of test) |
| BS EN ISO 595-2-1990 |
医用可重复使用的全玻璃或金属-玻璃注射器.第2部分:设计性能要求和试验 |
(Reusable all-glass or metal-and-glass syringes for medical use - Design, performance requirements and tests) |
| BS EN ISO 5961-1995 |
水质.用原子吸收分光光度法测定镉 |
(Water quality - Determination of cadmium by atomic absorption spectrometry) |
| BS EN ISO 5981-1997 |
橡胶或塑料涂层织物.抗复合弯曲剪切和磨损的测定 |
(Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing) |
| BS EN ISO 5983-1-2005 |
动物饲料.含氮量的测定和粗蛋白含量的计算.基耶达尔(Kjeldahl)法 |
|
| BS EN ISO 5983-2-2005 |
动物饲料.含氮量的测定和粗蛋白含量的计算.分块分解/蒸汽蒸馏法 |
|
| BS EN ISO 5999-2005 |
多孔软质聚合材料.地毯衬底外的承重用聚氨酯泡沫塑料.规范 |
|
| BS EN ISO 6009-1993 |
专用皮下注射针头.彩色识别编码 |
(Hypodermic needles for single use - Colour coding for identification) |
| BS EN ISO 604-2003 |
塑料.压缩性能的测定 |
(Plastics - Determination of compressive properties) |
| BS EN ISO 6042-2000 |
船舶技术.防风雨的单扇钢门 |
(Ships and marine technology - Weathertight single-leaf steel doors) |
| BS EN ISO 6103-1999 |
粘合的磨料制品.砂轮传动时的可允许的不平衡度.试验 |
(Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing) |
| BS EN ISO 6115-1997 |
造船.拖网绞车 |
(Shipbuilding - Trawl winches) |
| BS EN ISO 6157-2-2004 |
紧固件.表面缺陷.螺母 |
|
| BS EN ISO 6165-2002 |
土方机械.基本类型.词汇 |
(Earth-moving machinery - Basic types - Vocabulary) |
| BS EN ISO 6185-1-2001 |
充气艇.最大电动机功率为4.5KW的小艇 |
(Inflatable boats - Boats with a maximum motor power rating of 4,5 kW) |
| BS EN ISO 6185-2-2001 |
充气艇.最大电动机功率为4.5KW至15KW的小艇 |
(Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive) |
| BS EN ISO 6185-3-2001 |
充气艇.最大电动机功率为15KW以上的小艇 |
(Inflatable boats - Boats with maximum motor power rating of 15 kW and greater) |
| BS EN ISO 6186-1999 |
塑料.浇注性的测定 |
(Plastics - Determination of pourability) |
| BS EN ISO 62-1999 |
塑料.吸水率的测定 |
(Plastics - Determination of water absorption) |
| BS EN ISO 6218-2005 |
内河航行船只.顶推船手控连接装置.安全要求和主要尺寸 |
|
| BS EN ISO 6222-1999 |
水质.可培养微生物的计数.营养琼脂培养基中接种的计群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium |
| BS EN ISO 6224-1996 |
普通水用塑料织物增强软管 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification) |
| BS EN ISO 6246-1998 |
石油产品.轻度和中度馏出燃料的含胶量.喷射蒸发法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method) |
| BS EN ISO 6251-1998 |
液化石油气.对铜的侵蚀作用.铜条试验 |
(Liquid petroleum gases - Corrosiveness to copper - Copper strip test) |
| BS EN ISO 6252-1993 |
塑料.环境应力破裂(ESC)测定.恒定-拉伸-应力法 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method) |
| BS EN ISO 6259-1-2002 |
热塑管.拉伸特性的测定.通用试验方法 |
(Thermoplastics pipes - Determination of tensile properties - General test method) |
| BS EN ISO 6270-1-2001 |
涂料和清漆.耐湿度的测定.连续冷凝作用 |
(Paints and varnishes - Determination of resistance to humidity - Continuous condensation) |
| BS EN ISO 6270-2-2005 |
色漆和清漆.耐湿性的测定.试样置于冷凝水环境中的试验方法 |
|
| BS EN ISO 6272-1-2004 |
色漆和清漆.快速变形(抗冲击)试验.大面积压头的落锤试验 |
|
| BS EN ISO 6272-1993 |
涂料和清漆.落锤试验 |
(Paints and varnishes - Falling-weight test) |
| BS EN ISO 6284-1999 |
建筑图纸.极限偏差表示法 |
(Construction drawings - Indication of limit deviations) |
| BS EN ISO 6320-2000 |
动植物脂肪和油.折射指数的测定 |
(Animal and vegetable fats and oils - Determination of refractive index) |
| BS EN ISO 6321-2002 |
动植物脂肪和油.开口毛细管中的熔点(裂解点)测定 |
(Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)) |
| BS EN ISO 6326-3-1994 |
天燃气.硫化物的测定.用电势分析法对硫化氢、硫醇式硫和硫化羰式硫的测定 |
(Natural gas - Determination of sulfur compounds - Determination of hydrogen sulfide, mercaptan sulfur, and carbonyl sulfide sulfur by potentiometry) |
| BS EN ISO 6326-5-1994 |
天燃气.硫化物的测定.林格聂尔(lingener)燃烧法 |
(Natural gas - Determination of sulfur compounds - Lingener combustion method) |
| BS EN ISO 6330-2001 |
纺织品.织物试验的家庭洗涤和干燥程序 |
(Textiles - Domestic washing and drying procedures for textile testing) |
| BS EN ISO 6341-1996 |
水质.抑制大型(Daphniamagna Straus(枝角目,甲壳纲)活动性的测定 |
(Water quality - Biological methods - Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test) |
| BS EN ISO 6346-1996 |
货运集装箱的编码、识别和标志 |
(Freight containers - Coding, identification and marking) |
| BS EN ISO 6360-1-2004 |
牙科学.旋转仪器的数字编码系统.一般特征 |
|
| BS EN ISO 6360-1-2004 |
牙科学.旋转仪器的数字编码系统.一般特征 |
|
| BS EN ISO 6360-4-2004 |
牙科学.旋转仪器的数字编码系统.金刚石仪器的具体特性 |
|
| BS EN ISO 6360-6-2004 |
牙科学.旋转仪器的数字编码系统.研磨仪器的具体特性 |
|
| BS EN ISO 6385-2004 |
工作系统设计的人类工效学原则 |
|
| BS EN ISO 6401-2004 |
塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 |
|
| BS EN ISO 6402-1-2002 |
塑料.丁二烯改型材料除外的丙烯腈/苯乙烯模塑和压塑材料(ASA、AES和ACS)的耐冲击性能.名称与符号系统和规范 |
(Plastics - Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials - Designation system and basis for specifications) |
| BS EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 6410-1-1996 |
技术制图.螺钉和螺纹部件.第1部分:通用规范 |
(Technical drawings - Screw threads and threaded parts - General conventions) |
| BS EN ISO 6410-2-1996 |
技术制图.螺钉和螺纹部件.第2部分:螺纹嵌镶件 |
(Technical drawings - Screw threads and threaded parts - Screw thread inserts) |
| BS EN ISO 6410-3-1996 |
技术制图.螺钉和螺纹部件.第3部分:简化表示 |
(Technical drawings - Screw threads and threaded parts - Simplified representation) |
| BS EN ISO 6411-1997 |
技术制图.中心孔的简化画法 |
(Technical drawings - Simplified representation of centre holes) |
| BS EN ISO 6412-1-1995 |
技术制图.管道的简化表示法.总规则和直角表示 |
(Technical drawings - Simplified representation of pipelines - General rules and orthogonal representation) |
| BS EN ISO 6412-2-1995 |
技术制图.管道的简化表示法.第2部分:等角投影 |
(Technical drawings - Simplified representation of pipelines - Isometric projection) |
| BS EN ISO 6412-3-1996 |
技术制图.管道的简化表示法.第3部分:通风和排放系统终端部件 |
(Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems) |
| BS EN ISO 6413-1995 |
技术制图.花键和锯齿形花健的表示 |
(Technical drawings - Representation of splines and serrations) |
| BS EN ISO 6414-1983 |
玻璃器皿技术制图 |
(Technical drawings for glassware) |
| BS EN ISO 6416-2005 |
水文测量.超声波(声波)法测量流量 |
|
| BS EN ISO 642-1999 |
钢.端头淬硬性试验(乔米尼(Jominy)试验) |
Steel hardenability test by end quenching (Jominy test) |
| BS EN ISO 6427-1993 |
塑料.有机溶剂可萃取物的测定(常规法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) |
| BS EN ISO 6428-1999 |
技术制图.缩微复制的要求 |
Technical drawings - Requirements for microcopying |
| BS EN ISO 643-2003 |
钢.表面粒度的缩微照相测定 |
Steels - Micrographic determination of the apparent grain size |
| BS EN ISO 6433-1995 |
技术制图.零件标引 |
Technical drawings - Item references |
| BS EN ISO 6468-1997 |
水质.在液-液萃取后再用气相法对有机氯杀虫剂、多氯联苯和氯苯的测定 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction |
| BS EN ISO 6506-1-1999 |
金属材料.布氏硬度试验.试验方法 |
Metallic materials - Brinell hardness test - Test method |
| BS EN ISO 6506-2-1999 |
金属材料.布氏硬度试验.布氏硬度试验机的鉴定和校准 |
Metallic materials - Brinell hardness test - Verification and calibration of Brinell hardness testing machines |
| BS EN ISO 6506-3-1999 |
金属材料.布氏硬度试验.标准块材的校准 |
Metallic materials - Brinell hardness test - Calibration of reference blocks |
| BS EN ISO 6507-1-1998 |
金属材料.维式硬度试验.试验方法 |
Metallic materials - Vickers hardness test - Test method |
| BS EN ISO 6507-2-1998 |
金属材料.维式硬度试验.试验机器的验证 |
Metallic materials - Vickers hardness test - Verification of testing machines |
| BS EN ISO 6507-3-1998 |
金属材料.维式硬度试验.参考阻滞的校正 |
Metallic materials - Vickers hardness test - Calibration of reference blocks |
| BS EN ISO 6508-1-1999 |
金属材料.布氏硬度试验.试验方法(标度A、B、C、D、E、F、G、H、K、N、T) |
Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN ISO 6508-2-1999 |
金属材料.布氏硬度试验.试验机的鉴定和校准(标度A、B、C、D、E、F、G、H、K、N、T) |
Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN ISO 6508-3-1999 |
金属材料.布氏硬度试验.标准块材的校准(标度A、B、C、D、E、F、G、H、K、N、T) |
Metallic materials - Rockwell hardness test - Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN ISO 6509-1995 |
金属和合金的耐腐蚀性.黄铜耐脱锌性的测定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass |
| BS EN ISO 6520-1-1998 |
焊接及相关工艺.金属材料中几何缺陷的分类.熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Fusion welding |
| BS EN ISO 6520-2-2002 |
焊接及相关工艺.金属材料中几何缺陷的分类.压焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Welding with pressure |
| BS EN ISO 6529-2001 |
防护服.化学试剂的防护.测定防护服面料防液体和气体的渗透性 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases |
| BS EN ISO 6530-2005 |
防护服.对液态化学制品的防护.材料抗液体渗透性的试验方法 |
|
| BS EN ISO 6551-1983 |
石油液体和气体.动态测量的正确可靠性.电脉冲数据和/或电子脉冲数据的电缆传输 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
| BS EN ISO 6579-2002 |
食品和动物饲料的微生物学.测定沙门科菌属类的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp |
| BS EN ISO 658-2002 |
油料种子.杂质含量的测定 |
Oilseeds - Determination of content of impurities |
| BS EN ISO 659-1999 |
油料种子.油含量的测定(参考法) |
Oilseeds - Determination of oil content (Reference method) |
| BS EN ISO 6603-1-2000 |
塑料.硬质塑料复合轴向冲击性能的测定.非仪器冲击试验 |
Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing |
| BS EN ISO 6603-2-2000 |
塑料.硬质塑料复合轴向冲击性能的测定.设备冲击试验 |
Plastics - Determination of multi-axial impact behaviour of rigid plastics - Instrumented puncture testing |
| BS EN ISO 661-1995 |
动植物脂肪和油.试样的制备 |
(Animal and vegetable fats and oils - Preparation of test sample) |
| BS EN ISO 662-1998 |
动植物脂肪和油.水份和挥发物含量的测定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content |
| BS EN ISO 663-2001 |
动植物油和脂肪.不溶性杂质的含量测定 |
(Animal and vegetable fats and oils - Determination of insoluble impurities content) |
| BS EN ISO 664-1995 |
油料种子.将小样缩分为分析试样 |
(Oilseeds - Reduction of laboratory sample to test sample) |
| BS EN ISO 665-2000 |
油料种子.水和挥发物含量的测定 |
(Oilseeds - Determination of moisture and volatile matter content) |
| BS EN ISO 6682-1987 |
土方机械.可控舒适区和可及区 |
(Earth-moving machinery - Zones of comfort and reach for controls) |
| BS EN ISO 6708-1996 |
管件.公称尺寸的定义和选择 |
(Pipework components - Definition and selection of DN (nominal size)) |
| BS EN ISO 6721-1-2002 |
塑料.动态机械性能的测定.一般原理 |
Plastics - Determination of dynamic mechanical properties - General principles |
| BS EN ISO 6721-2-1996 |
塑料.电动机械性能的测定.扭摆 |
Plastics.Determination of dynamic mechanical properties - Torsion-pendulum method |
| BS EN ISO 6721-3-1996 |
塑料.电动机械性能的测定.第3部分:弯曲振动.共振法 |
(Plastics - Determination of dynamic mechanical properties - Flexural vibration - Resonance-curve method) |
| BS EN ISO 6743-4-1999 |
润滑剂、工业用润滑油和有关产品(L类).分类.H族(液压系统) |
Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
| BS EN ISO 6789-2003 |
螺钉和螺母用装配工具.手动扭具.设计合格检验、质量合格检验和再校准规程的要求和试验方法 |
(Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure) |
| BS EN ISO 6800-1998 |
动植物脂肪和油.测定甘油三酸酯分子两种状态中脂肪酸的成分 |
(Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglyceride molecules) |
| BS EN ISO 6803-1996 |
橡胶或塑料软管和软管组件.非柔性液压脉冲试验 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| BS EN ISO 6806-1996 |
用于油燃烧器的软管和软管组件.规范 |
Rubber hoses and hose assemblies for use in oil burners - Specification |
| BS EN ISO 6807-2004 |
旋转式钻探和振动用橡胶软管和软管组件.规范 |
|
| BS EN ISO 6807-2004 |
旋转式钻探和振动用橡胶软管和软管组件.规范 |
|
| BS EN ISO 6808-2001 |
石油类液体抽吸和低压排放用塑料软管和软管组件.规范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| BS EN ISO 6817-1993 |
封闭管道中导电液体流量测量.电磁流率计测量法 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters |
| BS EN ISO 683-17-1999 |
热处理钢、合金钢和易切削钢.滚珠轴承和滚柱轴承钢 |
(Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels) |
| BS EN ISO 6845-1989 |
表面活性剂.工业烷烃磺酸盐.烷烃单磺酸盐平均相对分子质量和烷烃单磺酸盐含量的测定 |
(Surface active agents - Technical alkane sulfonates - Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content) |
| BS EN ISO 6847-2001 |
焊接消耗品.化学分析用的焊接金属块的沉积 |
(Welding consumables - Deposition of a weld metal pad for chemical analysis) |
| BS EN ISO 6848-2005 |
电弧焊和切割.非自耗钨电极.分类 |
|
| BS EN ISO 6860-1985 |
涂料和清漆.弯曲试验(圆锥心轴) |
(Paints and varnishes - Bend test (conical mandrel)) |
| BS EN ISO 6867-2001 |
动物饲料.用高效液相色谱法测定维生素E的含量 |
(Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography) |
| BS EN ISO 6869-2001 |
动物饲料.钙,铜,铁,镁,锰,钾,钠和锌含量的测定.使用原子吸收光谱法 |
(Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry) |
| BS EN ISO 6871-1-1997 |
牙科基本金属铸造合金.第1部分:钴合金 |
(Dental base metal casting alloys - Cobalt-based alloys) |
| BS EN ISO 6871-2-1997 |
牙科基本金属铸造合金.第2部分:镍基合金 |
(Dental base metal casting alloys - Nickel-based alloys) |
| BS EN ISO 6872-1999 |
牙科烤瓷 |
(Dental ceramic) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com