标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光泽度的测定 |
|
| DIN EN ISO 13819-1-1997 |
石油和天然气工业.近海结构设计.第1部分:一般要求 |
(Petroleum and natural gas industries - Offshore structures - Part 1: General requirements (ISO 13819-1:1995); German version EN ISO 13819-1:1997) |
| DIN EN ISO 13844-2000 |
塑料管道系统.用PVC-U管道的未增塑聚氯乙烯(PVC-U)弹性密封圈型套管接头.负压力下渗漏紧密度的试验方法 |
(Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000) |
| DIN EN ISO 13845-2000 |
塑料管道系统.用PVC-U管道的未增塑聚氯乙烯(PVC-U)弹性密封圈型套管接头.在内压力下和角度偏离下渗漏紧密度 |
(Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO |
| DIN EN ISO 13846-2001 |
塑料管道系统.热塑压力管用端部荷载轴承和无端部荷载轴承组件和连接件.在水内压下测定长期密封性的试验方法 |
(Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000) |
| DIN EN ISO 13884-2005 |
动物和植物脂肪和油.用红外光谱测定法测定孤立的反式异构体 |
|
| DIN EN ISO 13897-2004 |
牙科学.汞齐合金胶囊 |
|
| DIN EN ISO 13900-2002 |
钢.硼含量测定.蒸馏后姜黄素光谱测定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997); ; German version EN 13900:2002) |
| DIN EN ISO 13916-1996 |
焊接.预热温度,层间温度和预加热的维持温度测量的导则 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996) |
| DIN EN ISO 13918-1998 |
焊接.电弧螺栓焊接用螺栓和陶瓷套圈 |
(Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998); German version EN ISO 13918:1998) |
| DIN EN ISO 13919-1-1996 |
焊接.电子和激光射线焊接接头.不均匀性评定组别的指南.第1部分:钢 |
(Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996) |
| DIN EN ISO 13919-2-2001 |
焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金 |
(Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001) |
| DIN EN ISO 13920-1996 |
焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles; shape and position (ISO 13920:1996); German version EN ISO 13920:1996) |
| DIN EN ISO 13927-2003 |
塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003) |
| DIN EN ISO 13929-2001 |
小型船舶.操舵装置.齿轮链接系统 |
(Small craft - Steering gear - Geared link systems (ISO 13929:2001); German version EN ISO 13929:2001) |
| DIN EN ISO 13934-1-1999 |
织物.织物表面结构拉伸特性.第1部分:用条形拉伸法测定最大拉伸力和最大拉伸力扩展 |
(Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999); German version EN ISO 13934-1:1999) |
| DIN EN ISO 13934-2-1999 |
织物.织物表面结构拉伸特性.第2部分:用织物抓样强力试验测定最大拉伸力 |
(Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999); German version EN ISO 13934-2:1999) |
| DIN EN ISO 13935-1-1999 |
织物.织物表面结构和成衣结构中接缝的拉伸试验.第1部分:用条状拉伸试验测定接缝的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999); German version EN ISO 13935-1:1999) |
| DIN EN ISO 13935-2-1999 |
织物.织物表面结构和成衣结构中接缝的拉伸试验.第2部分:用织物抓样强力试验测定接缝的最大拉伸力 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999); German version EN ISO 13935-2:1999) |
| DIN EN ISO 13936-1-2004 |
纺织品.机织物缝合处纱线抗脱性测定.第1部分:固定接缝开口法 |
|
| DIN EN ISO 13936-2-2004 |
纺织品.机织物缝合处纱线抗脱性测定.第2部分:固定负载法 |
|
| DIN EN ISO 13937-1-2000 |
纺织品.纺织物的撕裂特性.第1部分:用弹道摆锤法对撕裂力量的测定 |
(Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000); German version EN ISO 13937-1:2000) |
| DIN EN ISO 13937-2-2000 |
纺织品.纺织物的撕裂特性.第2部分:裤型试验样品撕裂力量的测定 |
(Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) (ISO 13937-2:2000); German version EN ISO 13937-2:2000) |
| DIN EN ISO 13937-3-2000 |
纺织品.纺织物的撕裂特性.第3部分:翅型试验样品撕裂力量的测定 |
(Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000); German version EN ISO 13937-3:2000) |
| DIN EN ISO 13937-4-2000 |
纺织品.纺织物的撕裂特性.第4部分:舌型试验样品撕裂力量的测定 |
(Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000); German version EN ISO 13937-4:2000) |
| DIN EN ISO 13938-1-1999 |
纺织材料.织物破裂特性.第1部分:测定抗破碎强度及爆裂膨胀的液压方法 |
(Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999) |
| DIN EN ISO 13938-2-1999 |
纺织材料.织物破裂特性.第2部分:测定抗破裂强度及爆裂膨胀的气压方法 |
(Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999); German version EN ISO 13938-2:1999) |
| DIN EN ISO 13943-2000 |
防火安全.词汇 |
(Fire safety - Vocabulary (ISO 13943:2000); Trilingual version EN ISO 13943:2000) |
| DIN EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
| DIN EN ISO 13995-2001 |
防护服.机械性能.抗穿刺性和抗动态撕裂性测定的试验方法 |
(Protective clothing - Mechanical properties - Test method for determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000); German version EN ISO 13995:2000) |
| DIN EN ISO 13997-1999 |
防护服装.机械特性.抗锐利物划割能力的测量 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999); German version EN ISO 13997:1999) |
| DIN EN ISO 13998-2003 |
防护服.防小折刀切割和刺穿的围裙、裤子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003); German version EN ISO 13998:2003) |
| DIN EN ISO 140-1-1998 |
声学.建筑物和建筑构件的隔音测量.第1部分:抑制侧向传输的实验室试验装置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997); German version EN ISO 140-1:1997) |
| DIN EN ISO 140-12-2000 |
声学.建筑物和建筑构件的隔音测量.第12部分:通道楼板的房间对房间气载和冲击声隔绝的试验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000); German version EN ISO 140-12:2000) |
| DIN EN ISO 140-14-2004 |
声学.建筑物和建筑构件的隔音测量.第14部分:场地的特殊情况的指南 |
|
| DIN EN ISO 140-4-1998 |
声学.建筑物和建筑构件的隔音测量.第4部分:房间之间气载声音隔绝的场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurement of airborne sound insulation between rooms (ISO 140-4:1998); German version EN ISO 140-4:1998) |
| DIN EN ISO 140-5-1998 |
声学.建筑物和建筑构件的隔音测量.第5部分:房屋正面和正面构件气载声隔绝的测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurement of airborne sound insulation of facade elements and facades (ISO 140-5:1998); German version EN ISO 140-5:1998) |
| DIN EN ISO 140-6-1998 |
声学.建筑物和建筑构件的隔音测量.第6部分:试验台上楼层板蹬踏声隔绝的测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998); German version EN ISO 140-6:1998) |
| DIN EN ISO 140-7-1998 |
声学.建筑物和建筑构件的隔音测量.第7部分:建筑物里楼层板蹬踏声隔绝的测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998); German version EN ISO 140-7:1998) |
| DIN EN ISO 140-8-1998 |
声学.建筑物内及建筑构件的隔音性测量.第8部分:负荷标准地板上进行地板铺面时传送出的冲击声音减弱的实验室 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997); German version EN ISO 14 |
| DIN EN ISO 14001-1996 |
环境管理系统.应用导则规范 |
(Environmental management systems - Specifications with guidance for use (ISO 14001:1996); German version EN ISO 14001:1996) |
| DIN EN ISO 14001-2005 |
环境管理系统.使用的要求和指南 |
|
| DIN EN ISO 1401-2000 |
农业喷雾用橡胶软管 |
(Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999) |
| DIN EN ISO 1402-1996 |
橡胶和塑料软管及软管组件.液压静力试验 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996) |
| DIN EN ISO 14020-2002 |
环境标签和声明.一般原则 |
(Environmental labels and declarations - General principles (ISO 14020:2000); German version EN ISO 14020:2001) |
| DIN EN ISO 14021-2001 |
环境标签和声明.自声明的环境要求(II型环境标签) |
(Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999); German version EN ISO 14021:2001) |
| DIN EN ISO 14024-2001 |
环境标签和声明.I式环境标签.原则和规程 |
(Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999); German version EN ISO 14024:2000) |
| DIN EN ISO 1403-1997 |
一般目的用水时使用的带织物加固内衬的橡胶软管.规范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995); German version EN ISO 1403:1997) |
| DIN EN ISO 14031-2000 |
环境管理.环境性能评定.导则 |
(Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999); German version EN ISO 14031:1999) |
| DIN EN ISO 14040-1997 |
环境管理.生态平衡.原则和总体要求 |
(Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997); German version EN ISO 14040:1997) |
| DIN EN ISO 14041-1998 |
环境管理.生态平衡.目的,研究领域以及生态平衡标单的确定 |
(Environmental management - Life cycle assessment - Goal and scope definition and life cycle inventory analysis (ISO 14041:1998); German version EN ISO 14041:1998) |
| DIN EN ISO 14042-2000 |
环境管理.生物圈评定.生物圈影响评定 |
(Environmental management - Life cycle assessment - Life cycle impact assessment (ISO 14042:2000); German version EN ISO 14042:2000) |
| DIN EN ISO 14043-2000 |
环境管理.生物圈评定.生物圈解释 |
(Environmental management - Life cycle assessment - Life cycle interpretation (ISO 14043:2000); German version EN ISO 14043:2000) |
| DIN EN ISO 14111-2000 |
天然气.分析痕量检测能力指南 |
(Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999) |
| DIN EN ISO 14113-1997 |
气焊设备.最大工作压力450巴以下压力液化气体用橡胶及塑料软管管道 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997) |
| DIN EN ISO 14114-1999 |
气焊设备.焊接,切割和相关工艺用乙炔钢瓶-电池设备.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999); German version EN ISO 14114:1999) |
| DIN EN ISO 14122-1-2002 |
机器安全.机器接近的固定方式.第1部分:两种水平之间的固定方式的选择 |
(Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001); German version EN ISO 14122-1:2001) |
| DIN EN ISO 14122-2-2002 |
机器安全.机器接近的固定方式.第2部分:工作平台和通路 |
(Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001); German version EN ISO 14122-2:2001) |
| DIN EN ISO 14122-3-2002 |
机器安全.机器接近的固定方式.第3部分:楼梯、梯子和护栏 |
(Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001); German version EN ISO 14122-3:2001) |
| DIN EN ISO 14122-4-2004 |
机械安全.进入机械的固定方式.第4部分:固定梯子 |
|
| DIN EN ISO 14125 Berichtigung 1-2003 |
DINENISO14125-1998的技术勘误 |
(Corrigenda to DIN EN ISO 14125:1998-06 (EN ISO 14125:1998/AC:2002)) |
| DIN EN ISO 14125-1998 |
纤维增强塑料.弯曲性能测定 |
(Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998) |
| DIN EN ISO 14126 Berichtigung 1-2003 |
DINENISO14126-2000的技术勘误 |
(Corrigenda to DIN EN ISO 14126:2000-12 (EN ISO 14126:1999/AC:2002)) |
| DIN EN ISO 14126-2000 |
纤维增强塑料混合物.水平方向压缩能力的测定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999) |
| DIN EN ISO 14129-1998 |
纤维增强塑料.测定切应力/切变形用45度层压塑料的抗伸试验.层面中抗剪模数的曲线 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by45 tension test method (ISO 14129:1997); German version EN ISO 14129:1997) |
| DIN EN ISO 14130-1998 |
纤维增强塑料.用短梁按三点法测定表面层间抗剪强度 |
(Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997) |
| DIN EN ISO 14159-2004 |
机械安全.机械设计的卫生要求 |
|
| DIN EN ISO 14160-1998 |
源于动物成份一次性用医学产品的消毒.液体消毒液消毒的确认和例行监测 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants (ISO 14160:1998); German version EN ISO 14160:1998) |
| DIN EN ISO 14161-2001 |
医疗保健产品的消毒.生物指示剂.结果的选择、使用和解释导则 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000); German version EN ISO 14161:2000) |
| DIN EN ISO 14163-1999 |
声学.消音器噪声控制指南 |
(Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998) |
| DIN EN ISO 14172-2004 |
焊接消耗品.镍和镍合金的手工金属弧焊接的药皮电焊条.分类 |
|
| DIN EN ISO 14181-2001 |
动物饲料.有机氯化物农药残留物的测定.气相色谱法 |
(Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method (ISO 14181:2000); German version EN ISO 14181:2000) |
| DIN EN ISO 14182-2000 |
动物饲料.有机磷杀虫剂残留物的测定.气相色谱法 |
(Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999); German version EN ISO 14182:1999) |
| DIN EN ISO 14184-1-1999 |
纺织物.甲醛含量的测定.第1部分:游离和水解甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998); German version EN ISO 14184-1:1998) |
| DIN EN ISO 14184-2-1998 |
织物.甲醛含量的测定.第2部分:游离甲醛(水蒸气吸收法) |
(Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998); German version EN ISO 14184-2:1998) |
| DIN EN ISO 1421-1998 |
用橡胶和塑料涂层的织物.抗拉强度和断裂伸长的测定 |
(Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998) |
| DIN EN ISO 14246-2001 |
可运输气瓶.气瓶阀.生产试验和检验 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001) |
| DIN EN ISO 14253-1 Bb.1-2000 |
几何产品规范(GPS).通过对工件和测量设备的测量进行检验.产品检验过程中测量设备的校正,在GPS测量中不确定 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999 |
| DIN EN ISO 14253-1-1999 |
几何产品规范(GPS).通过测量检验工件和测量仪器.第1部分:用规范对一致性或不一致性进行检验的判定规则 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998): German version EN ISO 14253-1:1998) |
| DIN EN ISO 14257-2002 |
声学.评价其声响性能用工作室空间声音分布曲线的测量及参数描述(ISO14257:2001) |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001) |
| DIN EN ISO 14270-2002 |
电阻点焊、滚焊和凸焊机械剥离试验的规程和样品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2000); German version EN ISO 14270:2001) |
| DIN EN ISO 14271-2002 |
电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000); German version EN ISO 14271:2001) |
| DIN EN ISO 14272-2002 |
电阻点焊和凸焊十字形拉力试验的规程和样品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001) |
| DIN EN ISO 14273-2002 |
电阻点焊、缝焊和凸焊的抗剪试验用样品尺寸和程序(ISO14273:2000) |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000); German version EN ISO 14273:2002) |
| DIN EN ISO 14284-2003 |
钢铁.测定化合物用样品的取样和制备方法 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002) |
| DIN EN ISO 14310-2003 |
石油和天然气工业.下井设备.封隔器和桥塞 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts) |
| DIN EN ISO 14314-2004 |
往复式内燃机.反冲起动设备.一般安全要求 |
|
| DIN EN ISO 14327-2004 |
电阻焊接.电阻点焊、凸焊和缝焊的可焊性凸角的测定过程 |
|
| DIN EN ISO 14344-2005 |
焊接和类似工艺.熔化和气体保护电焊过程.消耗品的采购指南 |
|
| DIN EN ISO 14344-2005 |
焊接和类似工艺.熔化和气体保护电焊过程.消耗品的采购指南 |
|
| DIN EN ISO 14372-2002 |
焊接消耗物.通过测量可扩散氢测定手工金属电弧焊电极的抗湿性 |
(Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000); German version EN ISO 14372:2002) |
| DIN EN ISO 14402-1999 |
水质.流量分析方法测定苯酚指数(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999); German version EN ISO 14402:1999) |
| DIN EN ISO 14403-2002 |
水质.用连续流量分析法测定总氰化物和游离氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002); German version EN ISO 14403:2002) |
| DIN EN ISO 14408-2005 |
激光手术用气管掐管.标识及随机文件要求 |
|
| DIN EN ISO 14419-1999 |
纺织材料.耐油性.耐碳氢化合物的试验 |
(Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998); German version EN ISO 14419:1999) |
| DIN EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的测定.计算法 |
(Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002) |
| DIN EN ISO 14453-1998 |
纸浆.丙酮-溶解物质的测定 |
(Pulps - Determination of acetone-soluble matter (ISO 14453:1997); German version EN ISO 14453:1998) |
| DIN EN ISO 14460-2002 |
汽车赛车手防护服.防热和防火焰.性能要求和检验方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:1 |
| DIN EN ISO 14501-1999 |
奶和奶粉.黄曲霉毒素M1含量的测定.用immunoaffinitiy色谱法提炼和用高效液体色谱分析法测定 |
(Milk and milk powder - Determination of aflatoxin M content - Clean-up by immunoaffinity chromatographie and determination by high-performance liquid chromatography (ISO 14501:1998); German version EN ISO 14501:1998) |
| DIN EN ISO 14509-2001 |
小型船舶.动力娱乐船发出的气载噪声的测定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); German version EN ISO 14509:2000) |
| DIN EN ISO 14509/A1-2004 |
小艇.动力娱乐用艇发出的空气噪音的测量.修改件1 |
|
| DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999) |
| DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999) |
| DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999) |
| DIN EN ISO 14527-1-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999) |
| DIN EN ISO 14527-2-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999) |
| DIN EN ISO 14527-3-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:对所选的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999) |
| DIN EN ISO 14528-1-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999) |
| DIN EN ISO 14528-2-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999) |
| DIN EN ISO 14528-3-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999) |
| DIN EN ISO 14529-1-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999) |
| DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999) |
| DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999) |
| DIN EN ISO 14530-1-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999) |
| DIN EN ISO 14530-2-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999) |
| DIN EN ISO 14530-3-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999) |
| DIN EN ISO 14534-2002 |
眼科光学.接触镜片和接触镜片护理产品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002); German version EN ISO 14534:2002) |
| DIN EN ISO 14539-2002 |
操作型工业机器人.用抓式钳子进行物品传递.词汇和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type-grippers - Vocabulary and presentation of caracteristics (ISO 14539:2000); German version EN ISO 14539:2001) |
| DIN EN ISO 14554-1-2000 |
焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000) |
| DIN EN ISO 14554-2-2000 |
焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com