标准号 |
中文名称 |
英文名称 |
| DIN EN 61028/A1-1996 |
电工测量仪器.X-Y型记录仪 |
(Electrical measuring instruments - X-Y recorders (IEC 61028:1991/A1:1995); German version EN 61028:1993/A1:1995) |
| DIN EN 61028/A2-1998 |
电气测量仪.X-Y-记录器.修正A2 |
(Electrical measuring instruments - X-Y recorders; Amendment A2 (IEC 61028:1991/A2:1997); German version EN 61028:1993/A2:1997) |
| DIN EN 61029-1-2001 |
可移动的电动机床的安全性.第1部分:一般要求 |
(Safety of transportable motor-operated electric tools - Part 1: General requirements (IEC 61029-1:1990, modified); German version EN 61029-1:2000) |
| DIN EN 61029-2-1-2002 |
可移动电动机具的安全.第2-1部分:园盘锯工作台的特殊要求 |
(Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified); German version EN 61029-2-1:2002) |
| DIN EN 61029-2-11-2004 |
移动式电动工具的安全.第2-11部分:组合斜切锯和台式锯的特殊要求 |
|
| DIN EN 61029-2-4-2003 |
移动式电动机床的安全.第2-4部分:台式磨床的特殊要求 |
(Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, modified); German version EN 61029-2-4:2003 + Corrigendum 2003) |
| DIN EN 61029-2-4-2004 |
移动式电动工具的安全.第2-4部分:台式砂轮机的特殊要求 |
|
| DIN EN 61029-2-5-2003 |
可移动电动机具的安全.第2-5部分:带锯的特殊要求 |
(Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified); German version EN 61029-2-5:2002) |
| DIN EN 61029-2-8-2004 |
移动式电动工具的安全.第2部分:单芯轴垂直模压机的特殊要求 |
|
| DIN EN 61029-2-9-2003 |
移动式电动机床的安全.第2-9部分:斜切锯的特殊要求 |
(Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified); German version EN 61029-2-9:2002) |
| DIN EN 61030-1993 |
音频,视频和视听设备.家用数字总线 |
(Audio, video and audiovisual systems; domestic digital bus (D2B) (IEC 61030:1991 + A1:1993); German version EN 61030:1993) |
| DIN EN 61032-1998 |
用外壳对人体和设备进行保护.验证用探针 |
(Protection of persons and equipment by enclosures - Probes for verification (IEC 61032:1997); German version EN 61032:1998) |
| DIN EN 61036-2001 |
电度用交流静态瓦时表(1级和2级) |
(Alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61036:1996 + A1:2000); German version EN 61036:1996 + A1:2000) |
| DIN EN 61037-1994 |
计费和负载控制用电子脉动控制接收装置 |
(Electronic ripple control receivers for tariff and load control (IEC 61037:1990, modified); German version EN 61037:1992) |
| DIN EN 61037/A1-1996 |
计费和负载控制用电子脉动控制接收装置.修正A1 |
(Electronic ripple control receivers for tariff and load control; Amendment A1 (IEC 61037:1990/A1:1996); German version EN 61037:1992/A1:1996) |
| DIN EN 61037/A2-1999 |
电能测量.费率控制和负载控制.电子中央遥控接收器的特殊要求.修正A2 |
(Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers; Amendment A2 (IEC 61037:1990/A2:1998); German version EN 61037:1992/A2:1998 + Corrigendum:1997.12) |
| DIN EN 61038-1994 |
计费和负载控制用计时开关 |
(Time switches for tariff and load control (IEC 61038:1990, modified); German version EN 61038:1992) |
| DIN EN 61038/A1-1996 |
计费和负载控制用计时开关.修正A1 |
(Time switches for tariff and load control; Amendment A1 (IEC 61038:1990/A1:1996); German version EN 61038:1992/A1:1996) |
| DIN EN 61038/A2-1999 |
电能测量.费率控制和负载控制.定时开关的特殊要求.修正A2 |
(Electricity metering - Tariff and load control - Particular requirements for time switches; Amendment A2 (IEC 61038:1990/A2:1998); German version EN 61038:1992/A2:1998 + Corrigendum:1997.12) |
| DIN EN 61040-1993 |
激光辐射功率和能量测量用探测器,测量仪和设备 |
(Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992) |
| DIN EN 61041-1-1996 |
非播放用录像机.测量方法.第1部分:一般视频(NTSC/PAL)和声频(纵向)特性 |
(Non-broadcast video tape recorders - Methods of measurement - Part 1: General video (NTSC/PAL) and audio (longitudinal) characteristics (IEC 61041-1:1990); German version EN 61041-1:1995) |
| DIN EN 61041-2-1996 |
非播放用录像机.测量方法.第2部分:SECAM录像机色度特性 |
(Non-broadcast videotape recorders - Methods of measurement - Part 2: Video characteristics chrominance SECAM (IEC 61041-2:1994); German version EN 61041-2:1996) |
| DIN EN 61041-3-1996 |
非广播电台用磁带录像机.第3部分:FM记录的声音特性 |
(Non-broadcast videotape recorders - Methods of measurement - Part 3: Audio characteristics for FM recording (IEC 61041-3:1993); German version EN 61041-3:1995) |
| DIN EN 61041-4-1998 |
非广播用录像机.测量方法.第4部分:测试带(NTSC/PAL/SECAM) |
(Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape (NTSC/PAL/SECAM) (IEC 61041-4:1997); German version EN 61041-4:1997) |
| DIN EN 61041-5-1998 |
非广播用录像机.测量方法.第5部分:包括装有Y/C录像插接连接器的Hi-频带录像机(NTSC/PAL) |
(Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL) (IEC 61041-5:1997); German version EN 61041-5:1997) |
| DIN EN 61043-1994 |
电声学.声强测量仪.用成对的压电式话筒测量 |
(Electroacoustics; instruments for the measurement of sound intensity; measurement with pairs of pressure sensing microphones (IEC 61043:1993); German version EN 61043:1994) |
| DIN EN 61044-1994 |
牵引用铅酸蓄电池的中间充电 |
(Opportunity-charging of lead-acid traction batteries (IEC 61044:1990); German version EN 61044:1992) |
| DIN EN 61047-2001 |
白炽灯用直流或交流电子降压变换器.性能要求 |
(D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements (IEC 61047:1991 + A1:1996 + A2:2001); German version EN 61047:1992 + A1:1996 + A2:2001) |
| DIN EN 61047-2005 |
钨丝灯用直流或交流供电电子降压转换器.性能要求 |
|
| DIN EN 61048-2000 |
电灯附件.管形荧光灯和其它放电灯电路中用的电容器.一般和安全要求 |
(Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:1991, modified + Corrigendum 1992 + A1:1995 + A2:1999); German version EN 61048:1993 + A1:1996 + Corrigendum |
| DIN EN 61049-1994 |
管形荧光灯和其它放电灯电路中用的电容器.性能要求 |
(Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements (IEC 61049:1991, modified + Corrigendum 1992); German version EN 61049:1993) |
| DIN EN 61050 Berichtigung 1-1995 |
对DINEN61050(VDE0713-6):1994-12的校正 |
(Corrigenda to DIN EN 61050 (VDE 0713 Part 6):1994-12; German version EN 61050/A11:1995) |
| DIN EN 61050-1994 |
管形荧光灯和其它放电灯电路中用的电容器.性能要求 |
(Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements (IEC 61050:1991 + Corrigendum March:1992, modified); German version EN 61050:1994) |
| DIN EN 61056-1-2003 |
通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能特性.试验方法 |
(General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test (IEC 61056-1:2002); German version EN 61056-1:2003) |
| DIN EN 61056-2-2003 |
通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记 |
(General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002); German version EN 61056-2:2003) |
| DIN EN 61057-1995 |
带电作业用带绝缘杆的1KVa.c以上的天线设备 |
(Aerial devices with insulating boom used for life working exceeding 1 kV a.c. (IEC 61057:1991, modified); German version EN 61057:1993) |
| DIN EN 61058-1-2003 |
电器用开关.第1部分:一般要求 |
(Switches for appliances - Part 1: General requirements (IEC 61058-1:2000, modified + A1:2001); German version EN 61058-1:2002) |
| DIN EN 61058-2-1 Berichtigung 1-2003 |
对DINEN61058-2-1(VDE0630Part2-1):2003-04的技术勘误 |
(Corrigendum to DIN EN 61058-2-1 (VDE 0630 Part 2-1):2003-04) |
| DIN EN 61058-2-1-2003 |
设备开关.第2-1部分:拉线开关的特殊要求 |
(Switches for appliances - Part 2-1: Particular requirements for cord switches (IEC 61058-2-1:1992); German version EN 61058-2-1:1993 + A1:1996 + A11:2002) |
| DIN EN 61058-2-5-2003 |
设备开关.第2-5部分:转换选择开关的特殊要求 |
(Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:1994); German version EN 61058-2-5:1994 + A11:2002) |
| DIN EN 61061-1-1999 |
电气用非浸渍致密层压板规范.第1部分:定义,标识和一般要求 |
(Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements (IEC 61061-1:1998); German version EN 61061-1:1998) |
| DIN EN 61061-2-2002 |
电气设备用非浸渍致密层压板规范.第2部分:试验方法 |
(Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test (IEC 61061-2:1992 + A1:2001); German version EN 61061-2:2001 + A1:2001) |
| DIN EN 61061-3-1-1999 |
电气用非浸渍致密层压板规范.第3部分:单一材料规范.第1节:山毛榉胶合板制片材制品 |
(Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Sheets produced from beech veneer (IEC 61061-3-1:1998); German version EN 61061-3-1:1998) |
| DIN EN 61061-3-2-2002 |
电气设备用非浸渍致密层压板规范.第3部分:单项材料规范.活页2:由水青岗木薄板制成的环形物 |
(Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Rings produced from beech veneer (IEC 61061-3-2:2001); German version EN 61061-3-2:2001) |
| DIN EN 61065-1994 |
老化后的矿物绝缘油的低温流动性的评定方法 |
(Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991); German version EN 61065:1993) |
| DIN EN 61067-1-1998 |
玻璃和玻璃聚酯纤维机织带的规范.第1部分:定义,分类和一般要求 |
(Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991); German version EN 61067-1:1997) |
| DIN EN 61067-2-1998 |
玻璃和玻璃聚酯纤维机织带的规范.第2部分:试验方法 |
(Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992); German version EN 61067-2:1997) |
| DIN EN 61067-3-1-1998 |
玻璃和玻璃聚酯纤维机织带的规范.第3部分:单一材料规范.第1活页:1,2,3型织带 |
(Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); German version EN 61067-3-1:1995) |
| DIN EN 61068-1-1998 |
聚酯纤维机织带的规范.第1部分:定义,标识和一般要求 |
(Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991); German version EN 61068-1:1997) |
| DIN EN 61068-2-1998 |
聚酯纤维机织带的规范.第2部分:试验方法 |
(Specification for polyester fibre woven tapes - Part 2: Methods of test (IEC 61068-2:1991); German version EN 61068-2:1997) |
| DIN EN 61068-3-1-1998 |
聚酯纤维机织带.第3部分:单一材料规范.第1活页:常规的或无梭织机编织带 |
(Polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 61068-3-1:1995); German version EN 61068-3-1:1995) |
| DIN EN 61069-1-1994 |
工业流程测量和控制.系统鉴定用系统性能的评价.第1部分:一般条件和方法 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1: General considerations and methodology (IEC 61069-1:1991); German version EN 61069-1:1993) |
| DIN EN 61069-2-1994 |
工业处理测量和控制.系统评定用系统特性估定.第2部分:评定方法 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology (IEC 61069-2:1993); German version EN 61069-2:1994) |
| DIN EN 61069-3-1997 |
工业流程测量和控制.系统评定用系统性能的评价.第3部分:系统功能性能评定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:1996); German version EN 61069-3:1996) |
| DIN EN 61069-4-1998 |
工业流程测量和控制.系统鉴定用装置性能的估价.第4部分:系统性能评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (IEC 61069-4:1997); German version EN 61069-4:1997) |
| DIN EN 61069-5-1995 |
工业处理测量和控制.系统评定用系统特性估定.第5部分:系统可靠性评定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability (IEC 61069-5:1994); German version EN 61069-5:1995) |
| DIN EN 61069-6-1998 |
工业流程测量和控制.系统鉴定用装置性能的估价.第6部分:系统可操作性的评估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability (IEC 61069-6:1998); German version EN 61069-6:1998) |
| DIN EN 61069-7-2000 |
工业流程测量和控制.系统评定用系统性能的评价.第7部分:安全评定系统 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety (IEC 61069-7:1999); German version EN 61069-7:1999) |
| DIN EN 61069-8-2000 |
工业流程测量和控制.系统评定用系统性能的评价.第8部分:无工作联系的系统特性的评定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999); German version EN 61069-8:1999) |
| DIN EN 61071-1-1997 |
大功率电子电容器.第1部分:总则 |
(Power electronic capacitors - Part 1: General (IEC 61071-1:1991, modified); German version EN 61071-1:1996) |
| DIN EN 61071-2-1997 |
大功率电子电容器.第2部分:熔断器上的切断试验,破坏试验,自行恢复试验和寿命试验的要求 |
(Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test (IEC 61071-2:1994); German version EN 61071-2:1996) |
| DIN EN 61073-1-2001 |
光纤和光缆的机械接头和熔融接头防护器.第1部分:总规范 |
(Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification (IEC 61073-1:1999); German version EN 61073-1:2000) |
| DIN EN 61074-1994 |
用差示扫描量热法对电气绝缘材料的结晶、熔化温度和热量的测定 |
(Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993) |
| DIN EN 61075-1994 |
船用劳兰接收机.最小功能的标准.试验方法和所需试验结果 |
(Loran-C receivers for ships; minimum performance standards; methods of testing and required test results (IEC 61075:1991, modified); German version EN 61075:1993) |
| DIN EN 61076-1-2002 |
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第1部分:总规范第1部分:总规范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification (IEC 61076-1:1995 + A1:1996 + A2:2001); German version EN 61076-1:1995 + A1:1996 + A2:2001) |
| DIN EN 61076-2-101-2004 |
电子设备连接器.第2-101部分:圆形连接器.低压设备用带螺钉或弹簧锁紧的M8圆形连接器、带螺钉锁紧的M12圆形连接器的详细规范 |
|
| DIN EN 61076-2-102-2003 |
电气设备连接器.第2-102部分:经质量评定的圆形连接器.外部低电压电源用插头和插座的详细规范 |
(Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply (IEC 61076-2-102:2002); German version EN 61076-2-102:2002) |
| DIN EN 61076-2-103-2005 |
电子设备连接器.第2-103部分:圆形连接器.一系列多极连接器的详细规范(XLR型) |
|
| DIN EN 61076-2-1999 |
高传输率的直流应用,低频率应用以及数字应用插接连接器.第2部分:经质量评定的圆形插接连接器.分规范 |
(Connectors for use in d.c., low frequency analogue and in digital high speed data applications - Part 2: Circular connectors with assessed quality; sectional specification (IEC 61076-2:1998); German version EN 61076-2:1999) |
| DIN EN 61076-3-001-2000 |
用于直流低频模拟和数字高速数据应用的连接器.第3001部分:已评定质量的矩形连接器.空白详细规范 |
(Connectors for use in d.c., low-frequency analogue, and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality; blank detail specification (IEC 61076-3-001:1999); German version EN 61076-3-001:2000) |
| DIN EN 61076-3-100-2000 |
用于直流低频模拟和数字高速数据应用的连接器.第3100部分:评定了质量的空白详细规范.用梯形壳和在1,27MM双 |
(Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab |
| DIN EN 61076-3-101-1998 |
高频传输直流电压应用,低频应用以及数字应用的质量评定的插接件.第3部份:矩形插接器.第101节:带有梯形束套 |
(Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and |
| DIN EN 61076-3-103-2004 |
电子设备连接器.第3-103部分:矩形连接器.用于高速串联数据的带1.25mm间距不可拆卸带状电缆触点的单排连接器的详细规范 |
|
| DIN EN 61076-3-104-2004 |
电子设备用连接器.第3-104部分:矩形连接器.最小频率600MHz及以下的数据传输用8路、非屏蔽和固定式连接器的详细规范 |
|
| DIN EN 61076-3-2000 |
用于直流低频模拟和数字高速数据应用的连接器.第3部分:评定了质量的矩形连接器.分规范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality; sectional specification (IEC 61076-3:1999); German version EN 61076-3:2000) |
| DIN EN 61076-4-001-1997 |
直流电压,低频率模拟以及数字高速传送数据用经质量评定的插接器.第4部分:印制电路板用插接器.第001节:空白 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996) |
| DIN EN 61076-4-100-2002 |
电子设备用连接器.第4-100部分:有质量评定的印制板连接器.印制板及底板用网格2.5mm(0.098in)的两件式连接器 |
(Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001); German version EN 6107 |
| DIN EN 61076-4-101-2002 |
电子设备连接器.第4-101部分:已质量评定的印制板连接器.符合IEC60917的印制板及底板用带有2.0mm格栅的两部 |
(Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076 |
| DIN EN 61076-4-102-1997 |
直流低频率模拟及高速数据数字系统用已进行过质量评定的连接器.第4部分:印制电路板联接器.第102节:带前定心 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in |
| DIN EN 61076-4-103-1999 |
高传输率的直流电压应用,低频率应用以及数字应用的插接连接器.第4-103部分:经质量评定的印制电路板的插接连 |
(Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-1 |
| DIN EN 61076-4-104-1999 |
高传输率的直流低频率及数字连接器.第4-104部分:经质量评定的印制电路板连接器.2,5mm网栅,屏蔽间接插接连接 |
(Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mu |
| DIN EN 61076-4-105-1999 |
高传输率的直流,低频率以及数字应用经质量评定的插接连接器.第4部分:印制电路用插接连接器.第105节:各种用 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wid |
| DIN EN 61076-4-107-2002 |
电子设备用连接器.第4-107部分:经质量评定的印制电路板连接器.带2.0mm基本栅极的有屏蔽的两段连接器的详细 |
(Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, fr |
| DIN EN 61076-4-108-2002 |
电子设备连接器.第4-108部分:有质量评定的印制板连接器.符合IEC60917-1的基本网格为2.5mm、有25mm模数间距 |
(Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densi |
| DIN EN 61076-4-110-2002 |
电子设备用连接器.第4-110部分:经质量评定的印制板连接器.带2.0mm基本栅极的有全屏蔽和闩锁功能的闩锁电缆 |
(Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm, including full shielding and latching function (IEC 61076-4-110:2001) |
| DIN EN 61076-4-111-2002 |
电子设备连接器.第4-111部分:有质量评定的印制板连接器.符合IEC60917-1的基本网格为2.5mm、有预插合特性的 |
(Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm |
| DIN EN 61076-4-113-2003 |
电子设备连接器.印制板连接器.第4-113部分:总线装置中印制板和背板用格栅为2.5mm的5列两件式连接器的详细规 |
(Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002); German version EN |
| DIN EN 61076-4-114-2004 |
电子设备用连接器.第4-114部分:印制板连接器.格栅为1mm1.5mm的有整体屏蔽功能的两件式连接器详细规范 |
(Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm ?1,5 mm (IEC 61076-4-114:2003); German version EN 61076-4-114:2003) |
| DIN EN 61076-4-114-2004 |
电子设备用连接器.第4-114部分:印制板连接器.格栅为1mm ?1.5mm的有整体屏蔽功能的两件式连接器详细规范 |
|
| DIN EN 61076-4-115-2004 |
电子设备用连接器.第4-115部分:印制板连接器.无限频带设备用印制板背面连接器 |
(Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003) |
| DIN EN 61076-4-115-2004 |
电子设备用连接器.第4-115部分:印制板连接器.无限频带设备用印制板背面连接器 |
|
| DIN EN 61076-4-1996 |
直流低频率模拟及高速数据数字系统用的已进行过质量评定的连接器.第4部分:类规范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Generic specification (IEC 61076-4:1995); German version EN 61076-4:1996) |
| DIN EN 61076-5-2002 |
直流低频率模拟及高速数据数字设备用的连接器.第5部分:经质量评定的串联插座.分规范 |
(Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001) |
| DIN EN 61076-6-2004 |
电子设备连接器.第6部分:松散部件触点.分规范 |
|
| DIN EN 61076-7-001-2005 |
电子设备连接器.第7-001部分:电缆引出端附件.空白详细规范(IEC 61076-7-001-2004) |
|
| DIN EN 61076-7-2001 |
直流、低频模拟及高速数字数据用的连接器.第7部分:经质量评定(包括合格和性能认可)的电缆输出附件.分规范 |
(Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German ver |
| DIN EN 61078-1994 |
可靠性分析技术.可靠性方框图法 |
(Analysis techniques for dependability - Reliability block diagram method (IEC 61078:1991); German version EN 61078:1993) |
| DIN EN 61079-1-1994 |
12GHz频带的卫星广播传送接收机的测量方法.第1部分:露天设备的射频测量 |
(Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band; part 1: radio-frequency measurement on outdoor units (IEC 61079-1:1992); German version EN 61079-1:1993) |
| DIN EN 61079-2-1994 |
12GHz频带的卫星广播传送接收机的测量方法.第2部分:卫星接收机的电气测量 |
(Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band; part 2: electrical measurements on DBS tuner units (IEC 61079-2:1992); German version EN 61079-2:1993) |
| DIN EN 61079-3-1993 |
12GHz频带的卫星广播传送用接收机的测量方法.第3部分:包括户外装置和DBS调谐装置卫星接收机和接收天线总性 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 3: electrical measurements of the overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit (IEC 61079-3:1993); German versio |
| DIN EN 61079-5-1994 |
12GHz频带卫星广播接收机的测量方法.第5部分:MAC/包系统的译码器单的测量方法 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 5: electrical measurements on decoder units for MAC/packet systems (IEC 61079-5:1993); German version EN 61079-5:1993) |
| DIN EN 61082 Bb.1-1998 |
用于电子技术的文件的准备.第6部分:索引 |
(Preparation of documents used in electrotechnology - Part 6: Index (IEC/TR3 61082-6:1997)) |
| DIN EN 61082-1-1995 |
电工技术使用的文件的制订.第1部分:一般要求 |
(Preparation of documents used in electrotechnology - Part 1: General requirements (IEC 61082-1:1991 + Corr. 11.93); German version EN 61082-1:1993) |
| DIN EN 61082-1/A1-1996 |
电工技术使用的文件的制订.第1部分:一般要求 |
(Preparation of documents used in electrotechnology - Part 1: General requirements; Amendment A1 (IEC 61082-1:1991/A1:1995); German version EN 61082-1:1993/A1:1995) |
| DIN EN 61082-1/A2-1997 |
电工技术文件.第1部分:一般要求.修改件A2 |
(Preparation of documents used in electrotechnology - Part 1: General requirements; Amendment A2 (IEC 61082-1:1991/A2:1996); German version EN 61082-1:1993/A2:1996) |
| DIN EN 61082-2-1995 |
电工技术使用的文件的制订.第2部分:定位函数图 |
(Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams (IEC 61082-2:1993); German version EN 61082-2:1994) |
| DIN EN 61082-3-1995 |
电工技术使用的文件的制订.第3部分:连接图,连接图表和连接一览表 |
(Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists (IEC 61082-3:1993); German version EN 61082-3:1994) |
| DIN EN 61082-4-1996 |
电工技术使用的文件的制订.第4部分:设定位置和安装文件 |
(Preparation of documents used in electrotechnology - Part 4: Location and installation documents (IEC 61082-4:1996); German version EN 61082-4:1996) |
| DIN EN 61083-1-2002 |
高压脉冲试验中测量用仪器和软件.第1部分:仪器的要求 |
(Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001) |
| DIN EN 61083-2 Berichtigung 1-1999 |
对DINEN61083-2(VDE0432第8部分)的校正:1998-01 |
(Corrigendum to DIN EN 61083-2 (VDE 0432 Teil 8):1998-01) |
| DIN EN 61083-2-1998 |
脉冲电压和脉冲电流检验用数字记录仪.第2部分:脉冲电压参数测定用软件的检验 |
(Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms (IEC 61083-2:1996); German version EN 614083-2:1997) |
| DIN EN 61086-1-1996 |
加感印制电路板用敷层(保形敷层)规范.第1部分:定义,分类及一般要求 |
(Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements (IEC 61086-1:1992); German version EN 61086-1:1994) |
| DIN EN 61086-1-2004 |
承载印制电路板用涂料(敷形涂料).第1部分:定义、分类及一般要求 |
|
| DIN EN 61086-2-1996 |
加感印制电路板用敷层(保形敷层)规范.第2部分:试验方法 |
(Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992); German version EN 61086-2:1994) |
| DIN EN 61086-2-2005 |
承载印制电路板用涂料(敷形涂料).第2部分:试验方法 |
|
| DIN EN 61086-3-1-1996 |
加感印制电路板用涂覆层(保形敷层).第3部分:专用材料规范.活页1:通用(I类)和高可靠性(II类)涂层 |
(Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) (IEC 61086-3-1:1995); German version EN 61086-3-1:1995) |
| DIN EN 61086-3-1-2004 |
承载印制电路板用涂料(敷形涂料).第3-1部分:单项材料规范.通用(1类)、高可靠性(2类)和航空(3类)涂料 |
|
| DIN EN 61094-1-2001 |
测量传声器.第1部分:实验室标准传声器规范 |
(Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000); German version EN 61094-1:2000) |
| DIN EN 61094-2-1994 |
扩音器的测量.第2部分:用可逆法对实验室标准扩音器的压力校准的基本方法 |
(Measurement microphones; part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992); German version EN 61094-2:1993) |
| DIN EN 61094-3-1996 |
测试传声器.第3部分:用互易技术对实验室标准传声器的自由场校准的初始方法 |
(Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-3:1995); German version EN 61094-3:1995) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com