标准号 |
中文名称 |
英文名称 |
| BS EN 746-5-2000 |
工业热处理设备.盐浴热处理设备的特殊安全要求 |
(Industrial thermoprocessing equipment - Particular safety requirements for salt bath thermoprocessing equipment) |
| BS EN 746-8-2000 |
工业热处理设备.淬火设备的特殊安全要求 |
(Industrial thermoprocessing equipment - Particular safety requirements for quenching equipment) |
| BS EN 747-1-1993 |
家具.家具床具.安全要求 |
Furniture - Bunk beds for domestic use - Safety requirements |
| BS EN 747-2-1993 |
家具.家具床具.试验方法 |
(Furniture - Bunk beds for domestic use - Test methods) |
| BS EN 748-1996 |
运动场设备.足球球门.功能和安全要求及试验方法 |
(Playing field equipment - Football goals - Functional and safety requirements, test methods) |
| BS EN 748-2004 |
运动场设备.足球球门.功能和安全要求及试验方法 |
|
| BS EN 748-2004 |
运动场设备.足球球门.功能和安全要求及试验方法 |
|
| BS EN 749-1996 |
运动场设备.手球球门.功能和安全要求及试验方法 |
(Playing field equipment - Handball goals - Functional and safety requirements, test methods) |
| BS EN 749-2004 |
运动场设备.手球球门.功能和安全要求及试验方法 |
|
| BS EN 749-2004 |
运动场设备.手球球门.功能和安全要求及试验方法 |
|
| BS EN 750-1996 |
运动场设备.曲棍球球门.功能和安全要求及试验方法 |
(Playing field equipment - Hockey goals - Functional and safety requirements, test methods) |
| BS EN 750-2004 |
运动场设备.曲棍球球门.功能和安全要求及试验方法 |
|
| BS EN 751-1-1997 |
接触第1,2,3家庭用燃气和热水的金属螺纹接头的密封材料.厌气密封剂 |
(Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Anaerobic jointing compounds) |
| BS EN 751-2-1997 |
接触第1,2,3家庭用燃气和热水的金属螺纹接头的密封材料.非硬化密封剂 |
(Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Non-hardening jointing compounds) |
| BS EN 751-3-1997 |
第1,2,3家庭用燃气和热水的金属螺纹接头的密封材料.非烧结PTFE复合物. |
(Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Unsintered PTFE tapes) |
| BS EN 752-1-1996 |
室外建筑物的排水系统.概述和定义 |
(Drain and sewer systems outside buildings - Generalities and definitions) |
| BS EN 752-2-1997 |
室外建筑物的排水系统.性能要求 |
Drain and sewer systems outside buildings - Performance requirements |
| BS EN 752-3-1997 |
室外建筑物的排水系统.计划 |
(Drain and sewer systems outside buildings - Planning) |
| BS EN 752-4-1998 |
室外建筑物的排水系统.液压设计和环境考虑 |
(Drain and sewer systems outside buildings - Hydraulic design and environmental considerations) |
| BS EN 752-5-1998 |
室外建筑物的排水系统.修复 |
(Drain and sewer systems outside buildings - Rehabilitation) |
| BS EN 752-6-1998 |
室外建筑物的排水系统.泵送安装 |
(Drain and sewer systems outside buildings - Pumping installations) |
| BS EN 752-7-1998 |
室外建筑物的排水系统.维修和使用 |
(Drain and sewer systems outside buildings - Maintenance and operations) |
| BS EN 753-1-1997 |
识别卡系统.内插薄柔卡片.常规技术规范 |
(Identification card systems - Intersector thin flexible cards - General technical specifications) |
| BS EN 753-2-1997 |
识别卡.横插式薄柔性卡片.磁记录技术 |
(Identification card systems - Intersector thin flexible cards - Magnetic recording technique) |
| BS EN 753-3-1999 |
识别卡系统.内插薄柔卡片.试验方法 |
(Identification card systems - Intersector thin flexible cards - Test methods) |
| BS EN 754-1-1997 |
铝和铝合金.锻制品.冷拔棒材和管材.第1部分:检验和交货技术条件 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Technical conditions for inspection and delivery) |
| BS EN 754-2-1997 |
铝和铝合金.锻制品.冷拔棒材和管材.第2部分:机械特性 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Mechanical properties) |
| BS EN 754-3-1996 |
铝和铝合金.冷拔棒材/条材和管材.圆形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Round bars, tolerances on dimensions and form) |
| BS EN 754-4-1996 |
铝和铝合金.锻制品.冷拔棒材和管材.第4部分:拉拔方形条材.尺寸和形状公差 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Square bars, tolerances on dimensions and form) |
| BS EN 754-5-1996 |
锻铝和铝合金.冷拔棒材/条材和管材.第5部分:矩形棒材.尺寸和形状公差 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Rectangular bars, tolerances on dimensions and form) |
| BS EN 754-6-1996 |
铝和铝合金.冷拔棒材/条材和管材.冷拔六角形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Hexagonal bars, tolerances on dimensions and form) |
| BS EN 754-7-1998 |
铝和铝合金.冷拔棒材和管材.无缝管.公差,尺寸和形状 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Seamless tubes, tolerances on dimensions and form) |
| BS EN 754-8-1998 |
铝和铝合金.冷拔棒材和管材.出水孔管.公差,尺寸和形状 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on dimensions and form) |
| BS EN 755-1-1997 |
铝和铝合金.挤压杆材/棒材、管材和型材.检验和运输的技术条件 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Technical conditions for inspection and delivery) |
| BS EN 755-2-1997 |
铝和铝合金.挤压杆材/棒材、管材和型材.机械特性 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Mechanical properties) |
| BS EN 755-3-1996 |
铝和铝合金.挤压杆材/棒材、管材和型材.圆形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Round bars, tolerances on dimensions and form) |
| BS EN 755-4-1996 |
铝和铝合金.挤压杆材/棒材、管材和型材.方形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Square bars, tolerances on dimensions and form) |
| BS EN 755-5-1996 |
铝和铝合金.挤压杆材/棒材、管材和型材.矩形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Rectangular bars, tolerances on dimensions and form) |
| BS EN 755-6-1996 |
铝和铝合金.挤压杆材/棒材、管材和型材.六角形棒材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Hexagonal bars, tolerances on dimensions and form) |
| BS EN 755-7-1998 |
铝和铝合金.挤压杆材/棒材、管材和型材.无缝管.尺寸公差和形状 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Seamless tubes, tolerances on dimensions and form) |
| BS EN 755-8-1998 |
铝和铝合金.挤压杆材/棒材、管材和型材.出水孔管.尺寸公差和形状 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Porthole tubes, tolerances on dimensions and form) |
| BS EN 755-9-2001 |
铝和铝合金.挤制棒材/杆材、管及型材.型材的尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Profiles, tolerances on dimensions and form) |
| BS EN 756-1996 |
焊接填料.非合金和细精粒钢埋弧焊用焊条和焊丝助剂.分类 |
(Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification) |
| BS EN 756-2004 |
焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类 |
|
| BS EN 757-1997 |
焊接消耗品.高强度钢手工金属弧焊用涂药焊条的分类 |
(Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) |
| BS EN 758-1997 |
焊接用料.有和无非合金钢及细粒钢气体外壳的金属电弧焊接用管状芯焊条.分类 |
(Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels - Classification) |
| BS EN 760-1996 |
焊接助熔剂.埋弧焊用焊剂.分类 |
(Welding consumables - Fluxes for submerged arc welding - Classification) |
| BS EN 761-1995 |
塑料管道系统.玻璃纤维增强热固性塑料管.干燥条件蠕变系数的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions) |
| BS EN 763-1995 |
塑料管道系统.喷射铸模热塑型配件.外观检查用加热试验法. |
(Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating) |
| BS EN 764-1-2004 |
压力设备.术语.压力、温度、体积和标称尺寸 |
|
| BS EN 764-1995 |
压力设备.术语和符号.压力、温度和体积 |
(Pressure equipment - Terminology and symbols - Pressure, temperature, volume) |
| BS EN 764-2-2002 |
压力设备.量值、符号和单位 |
(Pressure equipment - Quantities, symbols and units) |
| BS EN 764-3-2002 |
压力设备.有关方定义 |
(Pressure equipment - Definition of parties involved) |
| BS EN 764-4-2002 |
压力设备.冶金材料的交货技术条件的编制 |
(Pressure equipment - Establishment of technical delivery conditions for metallic materials) |
| BS EN 764-5-2002 |
压力设备.材料的合格和检验文献 |
(Pressure equipment - Compliance and inspection documentation of materials) |
| BS EN 764-7-2002 |
压力设备.不用火加热的压力设备的安全系统 |
(Pressure equipment - Safety systems for unfired pressure vessels) |
| BS EN 765-1994 |
食品运输用袋.聚丙烯之外的其它聚烯烃编织物袋 |
(Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only) |
| BS EN 766-1994 |
食品运输袋.黄麻纤维编织袋 |
(Sacks for the transport of food aid - Sacks made of jute fabric) |
| BS EN 767-1994 |
食品运输袋.黄麻聚烯烃混合织物编织袋 |
(Sacks for the transport of food aid - Sacks made of woven jute/polyolefin fabric) |
| BS EN 768-1994 |
食品运输袋.带内衬的棉织袋 |
(Sacks for the transport of food aid - Sacks made of lined cotton fabric) |
| BS EN 769-1994 |
食品运输袋.棉和聚烯烃混合编织袋 |
(Sacks for the transport of food aid - Sacks made of woven cotton/polyolefin fabric) |
| BS EN 770-1994 |
食品运输袋.纸袋 |
(Sacks for the transport of food aid - Paper sacks) |
| BS EN 771-1-2003 |
圬工单位规范.粘土砌块 |
(Specification for masonry units - Clay masonry units) |
| BS EN 771-2-2003 |
砌块规范.硅酸钙砌块 |
(Specification for masonry units - Calcium silicate masonry units) |
| BS EN 771-3-2004 |
砌块规范.集料混凝土砌块(密实和轻质集料) |
|
| BS EN 771-4-2003 |
圬工单位规范.高压蒸氧加气混凝土圬工单位 |
(Specification for masonry units - Autoclaved aerated concrete masonry units) |
| BS EN 771-5-2004 |
砌块规范.人工石料砌块 |
|
| BS EN 771-6-2001 |
圬工单位规范.天然石圬工单位 |
(Specification for masonry units - Natural stone masonry units) |
| BS EN 772-1-2000 |
圬工单位的试验方法.压力强度的测定 |
(Methods of test for masonry units - Determination of compressive strength) |
| BS EN 772-10-1999 |
砖石结构的试验方法.硅酸钙和高压蒸养加气混凝土结构中水分含量的测定 |
(Methods of test for masonry units - Determination of moisture content of calcium silicate and autoclaved aerated concrete units) |
| BS EN 772-11-2000 |
圬工单位的试验方法.集料混凝土、人造石和天然石圬工单位因毛细作用的吸水率及粘土圬工单位吸水初速的测定 |
(Methods of test for masonry units - Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water ab) |
| BS EN 772-13-2000 |
圬工单位的试验方法.圬工单位净和毛重干密度的测定 |
(Methods of test for masonry units - Determination of net and gross dry density of masonry units (except for natural stone)) |
| BS EN 772-14-2002 |
圬工单位的试验方法.集料混凝土和成品石料圬工单位的潮气运动的测定 |
(Methods of test for masonry units - Determination of moisture movement of aggregate concrete and manufactured stone masonry units) |
| BS EN 772-15-2000 |
圬工单位的试验方法.高压蒸养加气圬工单位水蒸气渗透率的测定 |
(Methods of test for masonry units - Determination of water vapour permeability of autoclaved aerated concrete masonry units) |
| BS EN 772-16-2000 |
圬工单位的试验方法.尺寸的测定 |
(Methods of test for masonry units - Determination of dimensions) |
| BS EN 772-18-2000 |
圬工单位的试验方法.硅酸盐砖的耐冻结熔化试验 |
(Methods of test for masonry units - Determination of freeze-thaw resistance of calcium silicate masonry units) |
| BS EN 772-19-2000 |
圬工单位的试验方法.大型水平粘土圬工单位的潮湿膨胀的测定 |
(Methods of test for masonry units - Determination of moisture expansion of large horizontally perforated clay masonry units) |
| BS EN 772-2-1998 |
砖石结构的试验方法.集料混凝土砖石结构孔隙面积百分率的测定 |
(Methods of test for masonry units - Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)) |
| BS EN 772-20-2000 |
圬工单位的试验方法.集料混凝土,加工石材和天然石材结构件的表面平整度的测定. |
(Methods of test for masonry units - Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units) |
| BS EN 772-3-1998 |
砖石结构的试验方法.流体静态称重法对粘土砖石结构的孔隙百分率和净体积的测定 |
(Methods of test for masonry units - Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing) |
| BS EN 772-4-1998 |
砖石结构的试验方法.天然石砖结构开放孔隙度和集块总密度的测定 |
(Methods of test for masonry units - Determination of real and bulk density and of total and open porosity for natural stone masonry units) |
| BS EN 772-5-2002 |
圬工单位的试验方法.粘土圬工单位活性溶解盐含量的测定 |
(Methods of test for masonry units - Determination of the active soluble salts content of clay masonry units) |
| BS EN 772-6-2001 |
圬工单位的试验方法.集料混凝土圬工单位弯曲拉伸强度的测定 |
(Methods of test for masonry units - Determination of bending tensile strength of aggregate concrete masonry units) |
| BS EN 772-7-1998 |
砖石结构的试验方法.通过煮沸对粘土砖石防潮层水吸收的测定 |
(Methods of test for masonry units - Determination of water absorption of clay masonry damp proof course units by boiling in water) |
| BS EN 772-9-1998 |
砖石结构的试验方法.通过添加盐对硅酸盐砖净体积和孔隙百分率体积的测定 |
(Methods of test for masonry units - Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling) |
| BS EN 773-1999 |
在液压排气管、水管和下水道中使用部件的一般要求 |
(General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers) |
| BS EN 774-1996 |
农业和林业机械的安全要求.手提式电动篱笆修剪机 |
(Garden equipment - Hand held, integrally powered hedge trimmers - Safety) |
| BS EN 777-1-1999 |
非家用多燃烧器的燃气高架辐射管加热器系统.系统D.安全 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - System D, safety) |
| BS EN 777-2-1999 |
非家用多燃烧器的燃气高架辐射管加热器系统.系统E.安全 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - System E, safety) |
| BS EN 777-3-2000 |
非家用多燃烧器的燃气高架辐射管加热器系统.系统F.安全 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - System F, safety) |
| BS EN 777-4-1999 |
非家用多燃烧器的燃气高架辐射管加热器系统.H 系统,安全性 |
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - System H, safety) |
| BS EN 778-1998 |
无风扇支持燃烧气体及/或燃烧物质移动、净热输入功率不超过70kW的空间加热用家用气体燃烧强制对流空气加热 |
(Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products) |
| BS EN 779-2002 |
一般通风用颗粒空气过滤器.过滤性能测定 |
(Particulate air filters for general ventilation - Determination of the filtration performance) |
| BS EN 786-1996 |
农业和林业机械的安全要求.电动步行手扶剪草机和草地修边机 |
(Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety) |
| BS EN 787-1994 |
食品运输袋.聚乙烯薄膜提袋. |
(Sacks for the transport of food aid - Sacks made of polyethylene film) |
| BS EN 788-1994 |
食品运输袋.复合薄膜制软管状提袋 |
(Sacks for the transport of food aid - Tubular sacks made of composite film) |
| BS EN 789-1996 |
木结构.试验方法.木基护墙板机械特性的测定 |
(Timber structures - Test methods - Determination of mechanical properties of wood-based panels) |
| BS EN 789-2005 |
木结构.试验方法.木基护墙板机械特性的测定 |
|
| BS EN 790-2001 |
内河运输船.45°至60°倾斜角楼梯.要求与类型 |
(Inland navigation vessels - Stairs with inclination angles of 45 ?to 60 ? Requirements, types) |
| BS EN 791-1996 |
钻机.安全 |
(Drill rigs - Safety) |
| BS EN 792-1-2000 |
手持非电动工具.安全要求.无螺纹机械紧固件用的组配动力工具 |
(Hand-held non-electric power tools - Safety requirements - Assembly power tools for non-threaded mechanical fasteners) |
| BS EN 792-10-2000 |
手持非电动工具.安全要求.压制动力工具 |
(Hand-held non-electric power tools - Safety requirements - Compression power tools) |
| BS EN 792-11-2000 |
手持非电动工具.安全要求.步冲轮廓机和剪床 |
(Hand-held non-electric power tools - Safety requirements - Nibblers and shears) |
| BS EN 792-12-2000 |
手持非电动工具.安全要求.小圆盘锯、小摆锯和往复式锯 |
(Hand-held non-electric power tools - Safety requirements - Small circular, small oscillating and reciprocating saws) |
| BS EN 792-13-2000 |
手持非电动工具.安全要求.紧固件旋具 |
(Hand-held non-electric power tools - Safety requirements - Fastener driving tools) |
| BS EN 792-2-2000 |
手持非电动工具.安全要求.切割和卷边动力工具 |
(Hand-held non-electric power tools - Safety requirements - Cutting-off and crimping power tools) |
| BS EN 792-3-2000 |
手持非电动工具.安全要求.钻头和攻丝机 |
(Hand-held non-electric power tools - Safety requirements - Drills and tappers) |
| BS EN 792-4-2000 |
手持非电动工具.安全要求.非旋转冲击动力工具 |
(Hand-held non-electric power tools - Safety requirements - Non-rotary percussive power tools) |
| BS EN 792-5-2000 |
手持非电动工具.安全要求.旋转冲击动力工具 |
(Hand-held non-electric power tools - Safety requirements - Rotary percussive drills) |
| BS EN 792-6-2000 |
手持非电动工具.安全要求.螺纹紧固件用组配动力工具 |
(Hand-held non-electric power tools - Safety requirements - Assembly power tools for threaded fasteners) |
| BS EN 792-7-2002 |
手持非电动工具.安全要求.研磨机 |
(Hand-held non-electric power tools - Safety requirements - Grinders) |
| BS EN 792-8-2001 |
手持非电动工具.安全要求.砂轮机和抛光机 |
(Hand-held non-electric power tools - Safety requirements - Sanders and polishers) |
| BS EN 792-9-2001 |
手持非电动工具.安全要求.冲压磨床 |
(Hand-held non-electric power tools - Safety requirements - Die grinders) |
| BS EN 793-1998 |
医疗供应设备安全的特殊要求 |
(Particular requirements for safety of medical supply units) |
| BS EN 794-1-1997 |
肺呼吸器.临危看护呼吸器的特殊要求 |
(Lung ventilators - Particular requirements for critical care ventilators) |
| BS EN 794-2-1997 |
肺呼吸器.家庭看护用呼吸器的特殊要求 |
(Lung ventilators - Particular requirements for home care use) |
| BS EN 794-3-1999 |
肺呼吸器.紧急情况和移动通风器的特殊要求 |
(Lung ventilators - Particular requirements for emergency and transport ventilators) |
| BS EN 795-1997 |
防止从高处跌落.抛锚设备.要求和试验 |
(Protection against falls from a height - Anchor devices - Requirements and testing) |
| BS EN 797-1996 |
条形码.符号规范“EAN/UPC“ |
(Bar coding - Symbology specifications - ’EAN/UPC’) |
| BS EN 798-1996 |
条形码.符号规范.’Codabar’ |
(Bar coding - Symbology specifications - ’Codabar’) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com