标准号 |
中文名称 |
英文名称 |
BS EN 573-4-1995 |
铝和铝合金.锻制品的化学组成和外形.产品外形 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Forms of products) |
BS EN 573-4-2004 |
铝和铝合金.锻制品的化学组成和外形.产品外形 |
|
BS EN 574-1997 |
机械安全.双柄控制设备.函数状况.设计原理 |
(Safety of machinery - Two-hand control devices - Functional aspects - Principles for design) |
BS EN 575-1996 |
铝和铝合金.熔铸母合金.规范 |
(Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) |
BS EN 576-2003 |
铝和铝合金.再熔非合金铝锭.规范 |
(Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) |
BS EN 577-1996 |
铝和铝合金.液体金属.规范 |
(Aluminium and aluminium alloys - Liquid metal - Specifications) |
BS EN 578-1994 |
塑料和管道系统.塑料管和配件.不透明度的测定 |
(Plastics piping systems - Plastics pipes and fittings - Determination of the opacity) |
BS EN 579-1994 |
塑料管道系统.交联聚乙烯(PE-X)管.溶剂萃取法测定交联密度 |
(Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction) |
BS EN 58-2004 |
沥青和沥青粘合剂.沥青粘合剂抽样 |
|
BS EN 580-2003 |
塑料管道系统.未增塑聚氯乙烯(PVC-U)管.特定温度下耐二氯甲烷的试验方法 |
(Plastics piping Systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test methods for the resistance to dichloromethane at a specified temperature (DCMT)) |
BS EN 581-1-1997 |
户外家具.野营、家用和订做的座椅和桌子.一般安全要求 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements) |
BS EN 581-3-1999 |
户外家具.野营、家用和订做的座椅和桌子.机械安全要求和桌子的试验方法 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for tables) |
BS EN 582-1994 |
热喷涂层的试验.胶粘剂抗拉强度的测定 |
(Thermal spraying - Determination of tensile adhesive strength) |
BS EN 583-1-1999 |
非损试验.超声波检验.一般规则 |
(Non-destructive testing - Ultrasonic examination - General principles) |
BS EN 583-2-2001 |
无损检验.超声波检验.敏感性和范围设定 |
(Non-destructive testing - Ultrasonic examination - Sensitivity and range setting) |
BS EN 583-3-1997 |
无损检验.超声波检验.第3部分:超声技术 |
(Non-destructive testing - Ultrasonic examination - Transmission technique) |
BS EN 583-4-2002 |
无损检验.超声波检验.表面垂直面的不连续性检验 |
(Non-destructive testing - Ultrasonic examination - Examination for discontinuities perpendicular to the surface) |
BS EN 583-5-2001 |
非损试验.超声波检验.不连续性检验的特征和尺寸测量 |
(Non-destructive testing - Ultrasonic examination - Characterization and sizing of discontinuities) |
BS EN 584-1-1995 |
无损试验.工业用X射线照相胶片.第1部分:工业X射线照相用胶片体系的分类 |
(Non-destructive testing - Industrial radiographic film - Classification of film systems for industrial radiography) |
BS EN 584-2-1997 |
无损试验.工业用X射线照相胶片.参考值法控制胶片工艺 |
(Non-destructive testing - Industrial radiographic film - Control of film processing by means of reference values) |
BS EN 586-1-1998 |
铝和铝合金.锻造.检验和验收技术条件 |
(Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery) |
BS EN 586-2-1994 |
铝和铝合金.锻件.机械特性和附加特性要求 |
(Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property requirements) |
BS EN 586-3-2002 |
铝和铝合金.锻件.尺寸和形状公差 |
(Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form) |
BS EN 588-1-1997 |
下水管和排水道用纤维水泥管.第1部分:重力管系统用管道、管连接件和管配件 |
(Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems) |
BS EN 588-2-2002 |
下水管和排水道用纤维水泥管.人空和检验室 |
(Fibre-cement pipes for sewers and drains - Manholes and inspection chambers) |
BS EN 589-2000 |
汽车燃料.液化石油气.要求和试验方法 |
(Automotive fuels - LPG - Requirements and test methods) |
BS EN 589-2004 |
机动车用燃料.液化石油气(LPG).要求和试验方法 |
|
BS EN 589-2004 |
机动车用燃料.液化石油气(LPG).要求和试验方法 |
|
BS EN 590-2000 |
汽车燃料.柴油.要求和试验方法 |
(Automotive fuels - Diesel - Requirements and test methods) |
BS EN 590-2004 |
机动车燃料.柴油.要求和试验方法 |
|
BS EN 591-2001 |
专业用玻璃诊断器械的使用说明 |
(Instructions for use for in vitro diagnostic instruments for professional use) |
BS EN 592-2002 |
自我测试用活体外诊断仪器的使用说明书 |
(Instructions for use for in vitro diagnostic instruments for self-testing) |
BS EN 593-1998 |
工业阀门.金属蝶阀 |
(Industrial valves - Metallic butterfly valves) |
BS EN 593-2004 |
工业阀门.金属蝶阀 |
|
BS EN 594-1996 |
木结构.试验方法.结构墙板剥离强度和刚度的试验 |
(Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels) |
BS EN 595-1995 |
木材结构.试验方法.强度和变形特性的测定用桁架的试验 |
(Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour) |
BS EN 596-1995 |
木结构.试验方法.木框架墙的软体冲击试验 |
(Timber structures - Test methods - Soft body impact test of timber framed walls) |
BS EN 597-1-1995 |
家具.床垫和装饰床具着火性评定.火源:阴燃卷烟 |
(Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: smouldering cigarette) |
BS EN 597-2-1995 |
家具.床垫和装饰床具着火性评定.火源:火柴火焰 |
(Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: match flame equivalent) |
BS EN 598-1995 |
污水工程用球墨铸铁管,配件和其它接头.要求和试验方法 |
(Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods) |
BS EN 599-1-1997 |
木材和衍生材料的耐久性.用生物试验测定的木材防腐剂的性能.第1部分:按危险等级的分类 |
(Durability of wood and wood-based products - Performance of preservatives as determined by biological tests - Specification according to hazard class) |
BS EN 599-2-1997 |
木材和木制品的耐久性.用生物试验测定的木材防腐剂的性能.第2部分:分类和标记 |
(Durability of wood and wood-based products - Performance of preservatives as determined by biological tests - Classification and labelling) |
BS EN 60034-1-1998 |
旋转电机.额定值和性能 |
(Rotating electrical machines - Rating and performance) |
BS EN 60034-12-1996 |
旋转电机.电压达到和包括690V,50Hz的单速三相笼式感应电机的启动性能 |
(Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz) |
BS EN 60034-14-1998 |
旋转电机.轴高56mm和更高的特定机械的机械振动.测量、评估和振动限值 |
(Rotating electrical machines - Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration) |
BS EN 60034-14-2004 |
旋转电机.轴高56mm和更高的特定机械的机械振动.测量、评价和剧烈振动限值 |
|
BS EN 60034-15-1996 |
旋转电机.第15部分:耐用线圈架绕线定子线圈交流旋转电机电平的脉冲电压 |
(Rotating electrical machines - Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils) |
BS EN 60034-16-1-1992 |
旋转电机.同步电机励磁系统.定义 |
(Rotating electrical machines - Excitation systems for synchronous machines - Definitions) |
BS EN 60034-18-1-1994 |
旋转电机.绝缘系统功能评定.通用导则 |
(Rotating electrical machines - Functional evaluation of insulation systems - General guidelines) |
BS EN 60034-18-21-1994 |
旋转电机.绝缘系统功能评定.线绕线圈的试验过程.热评定和分类 |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification.) |
BS EN 60034-18-22-2001 |
旋转电机.绝缘系统的功能评价.金属线绕组的试验过程.绝缘件替代物的分类 |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions) |
BS EN 60034-18-31-1994 |
旋转电机.第18部分:绝缘体系的功能评定.第31节:模绕绕组线的试验程序.用于50MVA、15kV以下(包括50MVA和15kV |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up t) |
BS EN 60034-2-1999 |
旋转电机.旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机) |
(Rotating electrical machines - Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)) |
BS EN 60034-22-1998 |
旋转电机.往复式内燃机(RIC)引擎驱动发电装置交流发电机. |
(Rotating electrical machines - A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets) |
BS EN 60034-3-1992 |
旋转电机.涡轮机型同步电机的具体要求 |
(Rotating electrical machines - Specific requirements for turbine-type synchronous machines) |
BS EN 60034-4-1988 |
旋转电机.第4部分:由试验测定同步电机参数的方法 |
(Rotating electrical machines - Methods for determining synchronous machine quantities from tests) |
BS EN 60034-5-2001 |
旋转电机.由旋转电机总体设计提供的防护级别.分级 |
(Rotating electrical machines - Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification) |
BS EN 60034-6-1994 |
旋转电机.第6部分:冷却方法 |
(Rotating electrical machines - Methods of cooling (IC Code)) |
BS EN 60034-7-1993 |
旋转电机.第7部分:结构和安装配置类型分类(IM规程) |
(Rotating electrical machines - Classification of types of constructions and mounting arrangements (IM Code)) |
BS EN 60034-8-2002 |
旋转电机.终端标志与旋转方向 |
(Rotating electrical machines - Terminal markings and direction of rotation) |
BS EN 60034-9-1998 |
旋转电机.噪音极限值 |
(Rotating electrical machines - Noise limits) |
BS EN 60041-1995 |
水轮机,蓄水泵和涡轮泵液压性能测定的现场验收试验 |
(Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines) |
BS EN 60044-1-1999 |
仪表用变压器.电流互感器 |
(Instrument transformers - Current transformers) |
BS EN 60044-2-1999 |
仪表用变压器.感应变压器 |
(Instrument transformers - Inductive voltage transformers) |
BS EN 60044-3-2003 |
仪表用变压器.组合变压器 |
(Instrument transformers - Combined transformers) |
BS EN 60044-5-2004 |
仪表互感器.电容电压互感器 |
|
BS EN 60044-6-1999 |
仪表用变压器.瞬时传送特性传送保护用电流变压器的要求 |
(Instrument transformers - Requirements for protective current transformers for transient performance) |
BS EN 60044-7-2000 |
仪表用变压器.电压变换器 |
(Instrument transformers - Electronic voltage transformers) |
BS EN 60044-8-2002 |
仪表用变压器.电流变压器 |
(Instrument transformers - Electronic current transformers) |
BS EN 60045-1-1993 |
汽轮机采购指南 |
(Guide to steam turbine procurement - Guide to steam turbine procurement) |
BS EN 60051-1-1999 |
直接动作指示模拟电气测量仪器及其附件. 通用于所用部件的定义和一般要求 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Definitions and general requirements common to all parts) |
BS EN 60052-2003 |
用标准(空)气隙法测量电压 |
(Voltage measurement by means of standard air gaps) |
BS EN 60059-1999 |
IEC标准电流额定值 |
(IEC standard current ratings) |
BS EN 60060-2-1995 |
高压试验技术.第2部分:测量装置 |
(High-voltage test techniques - Measuring systems) |
BS EN 60061-1-1997 |
灯头、灯座及检验其安全性和互换性的量规规范.灯头 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lamps caps) |
BS EN 60061-2-1997 |
灯头、灯座及检验其互换性和安全性的量规规范.灯座 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lampholders) |
BS EN 60061-3-1997 |
灯头、灯座及检验其互换性和安全性的量规规范.量规 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Gauges) |
BS EN 60061-4-1990 |
带互换性和安全控制量规的灯座和灯头规范.导则和一般说明 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Guidelines and general information) |
BS EN 60062-1994 |
电阻器和电容器的标志代码 |
(Marking codes for resistors and capacitors) |
BS EN 60062-2005 |
电阻器和电容器标志代码 |
|
BS EN 60064-1996 |
家用和类似普通照明用钨灯泡.性能要求 |
(Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements) |
BS EN 60065-2002 |
音频,录相和类似电器的安全要求 |
(Audio, video and similar electronic apparatus - Safety requirements) |
BS EN 60068-1-1995 |
环境试验规程.第1部分:总则和导则 |
(Environmental testing - General and guidance) |
BS EN 60068-2-1-1990 |
环境试验.试验.第2部分:试验A.第1节:低温法 |
(Environmental testing - Test methods - Tests A. Cold) |
BS EN 60068-2-11-1999 |
环境试验.试验方法.试验.试验Ka:盐雾 |
(Environmental testing - Test methods - Tests - Test KA - Salt mist) |
BS EN 60068-2-13-1999 |
环境试验.试验方法.试验.试验M:低气压 |
(Environmental testing - Test methods - Tests - Test M. Low air pressure) |
BS EN 60068-2-14-2000 |
环境试验.试验方法.试验N.温度的变化 |
(Environmental testing - Test methods - Test N. Change of temperature) |
BS EN 60068-2-17-1995 |
环境试验.试验方法.试验Q 密封 |
(Environmental testing - Test methods - Test Q. Sealing) |
BS EN 60068-2-18-2001 |
环境试验.试验方法.试验R和导则.水 |
(Environmental testing - Test methods - Tests R and guidance - Water) |
BS EN 60068-2-2-1993 |
环境试验.第2部分:试验方法.第2节:试验B.干热. |
(Environmental testing - Test methods - Tests B. Dry heat) |
BS EN 60068-2-21-1999 |
环境试验.试验方法.试验U.终端和集成固定装置的牢固度 |
(Environmental testing - Test methods - Test U. Robustness of terminations and integral mounting devices) |
BS EN 60068-2-27-1988 |
环境试验.第2部分:试验.第27节:试验Ea指南.冲击 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Ea and guidance - Shock) |
BS EN 60068-2-29-1987 |
环境试验.第2部分:试验.第29节:试验Eb和导则.碰撞 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Eb and guidance - Bump) |
BS EN 60068-2-30-1999 |
环境试验.试验方法.试验.试验Db和指南:交变湿热(12+12小时循环) |
(Environmental testing - Test methods - Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)) |
BS EN 60068-2-31-1977 |
环境试验.试验.试验Ec.跌落和倾复.设备样品的原样 |
(Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens) |
BS EN 60068-2-32-1992 |
环境试验.试验.试验Ed.自由跌落 |
(Environmental testing - Test methods - Test Ed - Free fall) |
BS EN 60068-2-33-2000 |
环境试验.试验方法.温度变化试验指南 |
(Environmental testing - Test methods - Guidance on change of temperature tests) |
BS EN 60068-2-38-1999 |
环境试验.试验方法.试验.试验Z/AD:混合温度/湿度循环试验 |
(Environmental testing - Test methods - Tests - Test Z/AD:composite temperature/humidity cyclic test) |
BS EN 60068-2-39-1999 |
环境试验.试验方法.试验.试验Z/AMD.低温、低气压和湿热的综合连续试验 |
Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test |
BS EN 60068-2-40-2000 |
环境试验.试验方法.试验Z/AM.冷/低气压结合试验 |
(Environmental testing - Test methods - Test Z/AM - Combined cold/low air pressure tests) |
BS EN 60068-2-41-2000 |
环境试验.试验方法.试验Z/BM.干热/低气压结合试验 |
(Environmental testing - Test methods - Tests - Test Z/BM: Combined dry heat/low air pressure tests) |
BS EN 60068-2-42-2003 |
环境试验.试验方法.试验Kc.触点和连接件用二氧化硫试验 |
(Environmental testing - Test methods - Test Kc - Sulphur dioxide test for contacts and connections) |
BS EN 60068-2-43-2003 |
环境试验.试验方法.试验Kd.触点和连接件用硫化氢试验 |
(Environmental testing - Test methods - Test Kd - Hydrogen sulphide test for contacts and connections) |
BS EN 60068-2-44-1995 |
环境试验.第2部分:试验方法.第44节:试验T指南:锡焊 |
(Environmental testing - Test methods - Tests - Guidance on Test T. Soldering) |
BS EN 60068-2-45-1981 |
环境试验.第2部分:试验.试验XA和导则.第45节:清洗溶剂中浸渍 |
(Environmental testing - Test methods - Environmental testing - Tests - Test XA and guidance - Immersion in cleaning solvents) |
BS EN 60068-2-47-2000 |
环境试验.试验方法.振动、冲击和类似动态试验用件、设备和其它设备的安装 |
(Environmental testing - Test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests) |
BS EN 60068-2-47-2005 |
环境试验.试验.振动、冲击和类似动态试验用试样的安装 |
|
BS EN 60068-2-48-2000 |
环境试验.试验方法.模拟储存效果的IEC 60068试验的应用指南 |
(Environmental testing - Test methods - Guidance on the application of the tests of IEC 60068 to simulate the effects of storage) |
BS EN 60068-2-5-2000 |
环境试验.试验方法.试验Sa:模拟地平线的太阳辐射 |
Environmental testing - Test methods - Test Sa: Simulated solar radiation at ground level |
BS EN 60068-2-50-2000 |
环境试验.试验方法.试验Z/AFc:热散失和无热散失样品同时存在的冷/振动(正弦)结合试验 |
(Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens) |
BS EN 60068-2-51-2000 |
环境试验.试验方法.试验.试验Z/BFc:热散失和无热散失样品的合成干热/振动(正弦)试验 |
(Environmental testing - Test methods - Tests - Tests Z/BFc - Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens) |
BS EN 60068-2-52-1996 |
环境试验规程.试验方法.试验.Kb试验.盐雾试验持续周期(氯化钠溶液) |
Environmental testing - Test methods - Tests - Test Kb - Salt mist cyclic (sodium chloride solution) |
BS EN 60068-2-55-1988 |
环境试验程序.第2部分:试验.第55节:试验Ee和导则:振动 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Ee and guidance - Bounce) |
BS EN 60068-2-57-2000 |
环境试验.试验方法.试验Ff.振动.时间系列法 |
Environmental testing - Test methods - Test Ff - Vibration - Time-history method |
BS EN 60068-2-58-1999 |
环境试验.试验方法.试验Td.软钎焊性、喷涂金属耐融化性和表面装配设备(SMD)耐焊接热的试验方法 |
Environmental testing - Test methods - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
BS EN 60068-2-58-2004 |
环境试验.试验方法.试验Td.表面安装设备用可焊性、耐金属溶融和耐焊接热的试验方法 |
|
BS EN 60068-2-59-1991 |
环境试验.第2部分:试验.试验Fe和导则.第59部分:振动(正弦拍频法) |
Environmental testing - Test methods - Test Fe and guidance - Vibration (sine-beat method) |
BS EN 60068-2-6-1996 |
基本环境试验规程.第2部分:试验.第6节:试验Fc:振动(正弦波) |
Environmental testing - Test methods - Test Fc - Vibration (sinusoidal) |
BS EN 60068-2-60-1996 |
环境试验.第2部分:试验.第60节:试验Ke:流动混合气体的腐蚀试验 |
Environmental testing - Test methods - Test Ke - Flowing mixed gas corrosion test |
BS EN 60068-2-61-1994 |
环境试验.第2部分:试验.第61节:试验2/ABDM.气候顺序 |
Environmental testing - Test methods - Test Z/ABDM - Climatic sequence |