标准号 |
中文名称 |
英文名称 |
| DIN EN 2591-507-2003 |
航空航天系列.光电连接件.试验方法.第507部分:电镀孔隙率 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002) |
| DIN EN 2591-508-2003 |
航空航天系列.光电连接件.试验方法.第508部分:触点涂层的厚度测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001) |
| DIN EN 2591-509-2003 |
航空航天系列.光电连接件.试验方法.第509部分:触点涂层的附着力 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001) |
| DIN EN 2591-512-2003 |
航空航天系列.光电连接件.试验方法.第512部分:密封连接器外壳固定接头的有效性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002) |
| DIN EN 2591-513-2003 |
航空航天系列.光电连接件.试验方法.第513部分:导磁性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 513: Magnetic permeability; German and English version EN 2591-513:2002) |
| DIN EN 2591-514-2003 |
航空航天系列.光电连接件.试验方法.第514部分:自含焊锡和助熔剂的焊接点的可焊性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 514: Solderability of contacts with self-contained solder and flux; German and English version EN 2591-514:2002) |
| DIN EN 2591-601-2002 |
航空航天系列.电气和光学连接件.检验方法.第601部分:光学件.嵌入式损耗 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 601: Optical elements; Insertion loss; German and English version EN 2591-601:2001) |
| DIN EN 2591-602-2002 |
航空航天系列.电气和光学连接件.检验方法.第602部分:光学件.衰减变量和光学间断性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 602: 0ptical elements; Variation of attenuation and optical discontinuity; German and English version EN 2591-602:2001) |
| DIN EN 2591-603-2002 |
航空航天系列.电气和光学连接件.试验方法.第603部分:光学件.配电的变化 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 603: Optical elements; Change of power distribution; German version EN 2591-603:2002) |
| DIN EN 2591-604-2002 |
航空航天系列.电气和光学连接件.检验方法.第604部分:光学件.光学平面的净化能力 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face; German and English version EN 2591-604:2001) |
| DIN EN 2591-605-2002 |
航空航天系列.电气和光学连接件.试验方法.第605部分:光学件.回程损耗 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 605: Optical elements; Return loss; German version EN 2591-605:2002) |
| DIN EN 2591-606-2002 |
航空航天系列.电气和光学连接件.试验方法.第605部分:光学件.串音 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 606: Optical elements; Crosstalk; German version EN 2591-606:2002) |
| DIN EN 2591-607-2002 |
航空航天系列.电气和光学连接件.试验方法.第607部分:光学件.对周围光耦合的抗扰性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 607: Optical elements; Immunity to ambient light coupling; German version EN 2591-607:2002) |
| DIN EN 2591-610-2002 |
航空航天系列.电气和光学连接件.检验方法.第610部分:光学件.电缆附件的有效性.电缆牵拉 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling; German and English version EN 2591-610:2001) |
| DIN EN 2591-6101-2003 |
航空航天系列.光电连接件.试验方法.第6101部分:光学件.外观检查 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6101: Optical elements; Visual examination; German and English version EN 2591-6101:2001) |
| DIN EN 2591-611-2002 |
航空航天系列.电气和光学连接件的试验方法.第611部分:光学件.电缆附件的有效性.电缆扭转 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion; German and English version EN 2591-611:2001) |
| DIN EN 2591-612-2002 |
航空航天系列.电气和光学连接件的试验方法.第612部分:光学件.电缆附件的有效性.电缆轴向压力 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2001) |
| DIN EN 2591-613-2002 |
航空航天系列.电气和光学连接件.试验方法.第613部分:光学件.冲击试验 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 613: Optical elements; Impact test; German version EN 2591-613:2002) |
| DIN EN 2591-614-2002 |
航空航天系列.电气和光学连接件.试验方法.第614部分:光学件.连接件径向压缩 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 614: Optical elements; Connector radial compression; German version EN 2591-614:2002) |
| DIN EN 2591-615-2002 |
航空航天系列.电气和光学连接件的试验方法.第615部分:光学件.衡温下电缆联接整体性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001) |
| DIN EN 2591-617-2002 |
航空航天系列.电气和光学连接件.试验方法.第617部分:光学件.温度循环 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002) |
| DIN EN 2591-6301-2003 |
航空航天系列.光电连接件.试验方法.第6301部分:光学件.耐热性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6301: Optical elements; Endurance at temperature; German and English version EN 2591-6301:2001) |
| DIN EN 2591-6303-2003 |
航空航天系列.光电连接件.试验方法.第6303部分:光学件.冷/低压和湿热试验 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6303: Optical elements; Cold/low pressure and damp heat; German and English version EN 2591-6303:2001) |
| DIN EN 2591-6305-2003 |
航空航天系列.光电连接件.试验方法.第6305部分:光学件.温度的快速变化 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001) |
| DIN EN 2591-6306-2003 |
航空航天系列.光电连接件.试验方法.第6306部分:光学件.长霉 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6306: Optical elements; Mould growth; German and English version EN 2591-6306:2001) |
| DIN EN 2591-6307-2003 |
航空航天系列.光电连接件.试验方法.第6307部分:光学件.盐雾 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6307: Optical elements; Salt mist; German and English version EN 2591-6307:2001) |
| DIN EN 2591-6314-2003 |
航空航天系列.光电连接件.试验方法.第6314部分:光学件.低气压的水浸试验 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6314: Optical elements; Immersion at low air pressure; German and English version EN 2591-6314:2001) |
| DIN EN 2591-6315-2003 |
航空航天系列.光电连接件.试验方法.第6315部分:光学件.耐流动性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6315: Optical elements; Fluid resistance; German and English version EN 2591-6315:2001) |
| DIN EN 2591-6316-2003 |
航空航天系列.光电连接件.试验方法.第6316部分:光学件.耐臭氧性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6316: Optical elements; Ozone resistance; German and English version EN 2591-6316:2001) |
| DIN EN 2591-6317-2003 |
航空航天系列.光电连接件.试验方法.第6317部分:光学件.易燃性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6317: Optical elements; Flammability; German and English version EN 2591-6317:2001) |
| DIN EN 2591-6318-2003 |
航空航天系列.光电连接件.试验方法.第6318部分:光学件.耐火性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6318: Optical elements; Fire resistance; German and English version EN 2591-6318:2001) |
| DIN EN 2591-6321-2002 |
航空航天系列.电气和光学连接件.试验方法.第6321部分:光学件.湿热循环试验 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6321: Optical elements; Damp heat, cyclic test; German version EN 2591-6321:2002) |
| DIN EN 2591-6323-2002 |
航空航天系列.电气和光学连接件.试验方法.第6323部分:光学件.热冲击(密封装置) |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002) |
| DIN EN 2591-6324-2003 |
航空航天系列.光电连接件.试验方法.第6324部分:光学件.层间密封 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001) |
| DIN EN 2591-6401-2003 |
航空航天系列.光电连接件.试验方法.第6401部分:光学件.稳定的加速度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6401: Optical elements; Acceleration steady state; German and English version EN 2591-6401:2001) |
| DIN EN 2591-6402-2003 |
航空航天系列.光电连接件.试验方法.第6402部分:光学件.冲击 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6402: Optical elements; Chocs; German and English version EN 2591-6402:2001) |
| DIN EN 2591-6403-2003 |
航空航天系列.光电连接件.试验方法.第6403部分:光学件.振动 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6403: Optical elements; Vibrations; German and English version EN 2591-6403:2001) |
| DIN EN 2591-6404-2003 |
航空航天系列.光电连接件.试验方法.第6404部分:光学件.横向荷载 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6404: Optical elements; Transverse load; German and English version EN 2591-6404:2001) |
| DIN EN 2591-6405-2003 |
航空航天系列.光电连接件.试验方法.第6405部分:光学件.轴向荷载 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6405: Optical elements; Axial load; German and English version EN 2591-6405:2001) |
| DIN EN 2591-6406-2003 |
航空航天系列.光电连接件.试验方法.第6406部分:光学件.机械耐久性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6406: Optical elements; Mechanical endurance; German and English version EN 2591-6406:2001) |
| DIN EN 2591-6414-2003 |
航空航天系列.光电连接件.试验方法.第6414部分:光学件.脱钩拉索式光学连接件的不配合性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001) |
| DIN EN 2591-6415-2003 |
航空航天系列.光电连接件.试验方法.第6415部分:光学件.检测探针损伤 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 6415: Optical elements; Test probe damage; German and English version EN 2591-6415:2001) |
| DIN EN 2591-701-2002 |
航空航天系列.电气和光学连接件的试验方法.第701部分:电气件耦合器的开路阻抗测试 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 701: Electrical elements; Measurement of open circuit impedance of couplers; German and English version EN 2591-701:2001) |
| DIN EN 2591-702-2002 |
航空和航天系列.电气和光学连接件.检验方法.第702部分:电气件的耦合器的信号失真测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 702: Electrical elements; Measurement of signal distortion of couplers; German and English version EN 2591-702:2001) |
| DIN EN 2591-703-2002 |
航空航天系列.电气和光学连接件的试验方法.第703部分:电气件.耦合器的共模抑制比测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 703: Electrical elements; Common mode rejection of couplers; German and English version EN 2591-703:2001) |
| DIN EN 2591-704-2002 |
航空航天系列.电气和光学连接件.检验方法.第704部分:电气件.耦合器变压器的转换比率的测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001) |
| DIN EN 2591-705-2002 |
航空和航天系列.电气和光学连接件.检验方法.第705部分:电气件.耦合器的短线输入阻抗的测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 705: Electrical elements; Measurement of stub input impedance of couplers; German and English version EN 2591-705:2001) |
| DIN EN 2591-706-2002 |
航空航天系列.电气和光学连接件.检验方法.第706部分:电气件.传输试验 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 706: Electrical elements; Transmission test; German and English version EN 2591-706:2001) |
| DIN EN 2591-707-2002 |
航空航天系列.电气和光学连接件.试验方法.第707部分:电气件.总线或短线终端特性阻抗的测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 707: Electrical elements; Measurement of characteristic impedance of a bus or a stub terminator; German and English version EN 2591-707:2001) |
| DIN EN 2591-708-2002 |
航空航天系列.电气和光学连接件.检验方法.第708部分:电气件.耦合器表面传输阻抗的测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 708: Electrical elements; Measurement of surface transfer impedance of couplers; German and English version EN 2591-708:2001) |
| DIN EN 2591-709-2002 |
航空航天系列.电气和光学连接件.检验方法.第709部分:电气件.耦合器拉伸强度的测量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 709: Electrical elements; Tensile strength of couplers; German and English version EN 2591-709:2001) |
| DIN EN 2591-7301-2003 |
航空航天系列.光电连接件.试验方法.第7301部分:电气件.耦合器的耐热性 |
(Aeospace series - Elements of electrical and optical connection; Test methods - Part 7301: Electrical elements; Temperature endurance of couplers; German and English version EN 2591-7301:2001) |
| DIN EN 2592-1991 |
航空和航天.三极温度补偿保护开关.额定电流25A以下.产品标准 |
(Aerospace series; three-pole circuit breakers; temperature compensated rated currents up to 25 A; product standard; german version EN 2592:1990) |
| DIN EN 25923-1994 |
防火.灭火介质.二氧化碳 |
(Fire protection; fire extinguishing media; carbon dioxide (ISO 5923:1989); German version EN 25923:1993) |
| DIN EN 2596-1988 |
航空和航天.耐蚀钢制镀镉径向啮合垫圈.尺寸 |
(Aerospace series; washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated; dimensions) |
| DIN EN 25967-1990 |
丝锥.最重要的类型名称和概念(ISO5967:1981) |
(Taps for thread cutting; nomenclature of the main types and terminology (ISO 5967:1981); german version EN 25967:1989) |
| DIN EN 25968-1990 |
圆板牙.概念和名称(ISO5968:1981) |
(Circular screwing dies; terminology (ISO 5968:1981); german version EN 25968:1989) |
| DIN EN 2597-1998 |
航空和航天.单向层压碳纤维增强塑料.垂直纤维方向的拉力试验 |
(Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998) |
| DIN EN 25978-1993 |
橡胶或塑料涂层织物.耐粘结性的测定 |
(Rubber- or plastics-coated fabrics; determination of blocking resistance (ISO 5978:1990); German version EN 25978:1993) |
| DIN EN 26-2001 |
与燃气锅炉相配的生产民用热水的燃气瞬时水加热器 |
(Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners; German version EN 26:1997 + AC:1998 + A1:2000) |
| DIN EN 2601-1996 |
航空和航天.可调叉头.交货技术条件 |
(Aerospace series - Fork ends, adjustable - Technical specification; German version EN 2601:1996) |
| DIN EN 2609-1989 |
航空和航天.铜锌合金夹紧装置螺母.尺寸和负荷 |
(Aerospace series; turnbarrels, control cable in copper-zinc alloys; dimensions and loads) |
| DIN EN 26098-1993 |
信息处理.存储数字数据用.12.7mm(0.5in)宽磁带自装载盒 |
(Information processing; self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape (ISO 6098:1984); English version EN 26908:1993) |
| DIN EN 26157-1-1991 |
紧固件.表面缺陷.一般要求用螺钉(ISO6157-1-88) |
(Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991) |
| DIN EN 26157-3-1991 |
紧固件.表面缺陷.特殊要求用螺钉(ISO6157-1-88) |
(Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991) |
| DIN EN 2617-2003 |
航空航天系列.厚度6mma100mm的钛和钛合金板.尺寸 |
(Aerospace series - Plates in titanium and titanium alloys, thickness 6 mma100 mm - Dimensions; German and English version EN 2617:2001) |
| DIN EN 26184-1-1991 |
防爆系统.第1部分:空气中易燃粉尘爆炸参数的测定(ISO6184-1-85) |
(Explosion protection systems; part 1: determination of explosion indices of combustible dust in air (ISO 6184-1:1985); german version EN 26184-1:1991) |
| DIN EN 26184-2-1991 |
防爆系统.第2部分:空气中易燃气体的爆炸参数的测定(ISO6184-2-85) |
(Explosion protection systems; part 2: determination of explosion indices of combustible gases in air (ISO 6184-2:1985); german version EN 26184-2:1991) |
| DIN EN 26184-3-1991 |
防爆系统.第3部分:粉尘和空气混合物.瓦斯气和空气混合物之外.的空气中易燃物质的爆炸参数的测定(ISO6184-3- |
(Explosion protection systems; part 3: determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985); german version EN 26184-3:1991) |
| DIN EN 26184-4-1991 |
防爆系统.第4部分:测定爆炸抑制系统的性能(ISO6184-4-85) |
(Explosion protection systems; part 4 : determination of efficacy of explosion suppression systems (ISO 6184-4:1985); german version EN 26184-4:1991) |
| DIN EN 26189-1992 |
声学.用于保护听觉的纯音响室空气传导阈值的听力测定(ISO6189-83一致) |
(Acoustics; pure tone air conduction threshold audiometry for hearing conservation purposes (identical with ISO 6189:1983); german version EN 26189:1991) |
| DIN EN 2622-2003 |
航空航天系列.流体用直径为3.2mmD100mm的耐热合金制圆形管.尺寸 |
(Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001) |
| DIN EN 263-2002 |
家用浴池和淋浴缸用交联浇铸聚丙烯晴板材 |
(Cross-linked cast acrylic sheets for baths and shower trays for domestic purposes; German version EN 263:2002) |
| DIN EN 2632-1994 |
航空和航天.铝合金AL-P7075-T73511.压制棒型和截面.带控制粗结晶的边缘层a或d |
(Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections; a or D100 mm, with peripheral coarse grain control; German version EN 2632:1993) |
| DIN EN 2633-1994 |
航空航天系列.铝合金AL-P2024-T3511;1,2mm或150mm,边缘粗糙控制 |
(Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mma or D150 mm, with peripheral coarse grain control; German version EN 2633:1993) |
| DIN EN 26352-1992 |
镍铁.镍含量的测定.丁二酮肟重量分析法(ISO6352-85) |
(Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985); german version EN 26352:1991) |
| DIN EN 26360-2-1991 |
牙科学.旋转式牙科器械.数字标准号系统.第2部分:形成和设计(ISO6360-2-86AMD1-199) |
(Dentistry; dental rotary instruments; number coding system; part 2: shape and specific characteristics (ISO 6360-2:1986 includes AMD 1:1991); german version EN 26360-2:1991 + A1:1991) |
| DIN EN 264-1991 |
用液体燃料的燃烧设备的安全闭锁装置.安全技术要求和检验 |
(Safety shut-off devices for combustion plants using liquid fuels; safety requirements and testing; german version EN 264:1991) |
| DIN EN 2641-1989 |
航空和航天.飞机操纵钢索组件.组合的可能性和尺寸 |
(Aerospace series; control cable assemblies; combinations and dimensions) |
| DIN EN 2644-1998 |
航空和航天.飞行控制用操作杆.交货技术条件 |
(Aerospace series - Rod assemblies for flight controls - Technical specification; German version EN 2644:1997) |
| DIN EN 26461-1-1993 |
水质.还原亚硫酸盐的厌氧菌芽胞(梭状芽胞杆菌)的探测和计数.第1部分:液体介质增菌法 |
(Water quality; detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); part 1: method by enrichment in a liquid medium (ISO 6461-1:1986); german version EN 26461-1:1993) |
| DIN EN 26461-2-1993 |
水质.还原亚硫酸盐的厌氧菌芽胞(梭状芽胞杆菌)的探测和计数.第2部分:薄膜过滤法 |
(Water quality; detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); part 2: method by membrane filtration (ISO 6461-2:1986); german version EN 26461-2:1993) |
| DIN EN 2647-1995 |
航空和航天.自锁镀隔合金钢MOS*2制坡面垫平用润滑六角螺母.等级900MPa/235℃ |
(Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS lubricated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2647:1995) |
| DIN EN 2648-1995 |
航空和航天.镀隔合金钢制斜垫片 |
(Aerospace series - Washers, concave, in alloy steel, cadmium plated; German version EN 2648:1995) |
| DIN EN 2649-1995 |
航空和航天.带槽的法兰头螺钉.镀镉合金钢螺纹接近直到顶部.等级:900MPa(室温下)/235°C |
(Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2649:1995) |
| DIN EN 2650-1996 |
航空和航天.钝化耐蚀钢制螺纹长度接近顶部带槽平头螺丝.等级:600MPa(室温下)/425℃ |
(Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C ; German version EN 2650:1996) |
| DIN EN 26501-1992 |
镍铁.规范和交货条件 |
(Ferronickel; specification and delivery requirements (ISO 6501:1988); german version EN 26501:1992) |
| DIN EN 2651-1996 |
航空和航天.镀锡黄铜制螺纹接近顶部带槽平头螺丝.等级:300MPa(室温下)/80℃ |
(Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 C; German version EN 2651:1996) |
| DIN EN 2652-1997 |
航空和航天.镀镉合金钢制螺纹接近顶部带槽的100度沉头螺丝.等级900MPa(室温下)/235℃ |
(Aerospace series - Screws, 100 countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2652:1997) |
| DIN EN 2653-1996 |
航空和航天.钝化耐蚀钢制螺纹长度接近顶部带槽100度沉头螺丝.等级:600MPa(室温下)/425℃ |
(Aerospace series - Screws, 100 countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C; German version EN 2653:1996) |
| DIN EN 2654-1996 |
航空和航天.镀锡黄铜制螺纹接近顶部带槽100度沉头螺丝.等级:300MPa(室温下)/80℃ |
(Aerospace series - Screws, 100 countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 C; German version EN 2654:1996) |
| DIN EN 26554-1991 |
法兰连接的疏水阀.结构长度(ISO6554-80) |
(Flanged automatic steam traps; face-to-face dimensions (ISO 6554:1980); german version EN 26554:1991) |
| DIN EN 2656-2002 |
航空航天系列.管连接件.焊接连接件端头.几何配置 |
(Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001) |
| DIN EN 26590-1-1993 |
包装.包装袋.术语和类型.第1部分:纸袋 |
(Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983); german version EN 26590-1:1992) |
| DIN EN 26590-2-1993 |
包装.包装袋.术语和类型.第2部分:塑料袋 |
(Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986); german version EN 26590-2:1992) |
| DIN EN 26591-1-1993 |
包装.包装袋.测量和测量方法说明.第1部分:空纸袋 |
(Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984); german version EN 26591-1:1992) |
| DIN EN 26591-2-1993 |
包装.包装袋.测量和测量方法说明.第2部分:塑料薄膜空袋 |
(Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985); german version EN 26591-2:1992) |
| DIN EN 26595-1993 |
水质.砷含量测定.二乙基二硫代氨基甲酸银分光光度法 |
(Water quality; determination of total arsenic; silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982); german version EN 26595:1992) |
| DIN EN 26599-1-1993 |
包装.包装袋.试验的环境调节.第1部分:纸袋 |
(Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983); german version EN 26599-1:1992) |
| DIN EN 266-1992 |
墙壁贴面卷料.墙壁贴面织物规范 |
(Wall coverings in roll form; specification for textile wall coverings; german version EN 266:1991) |
| DIN EN 2665-001-1999 |
航空和航天.三极,恒温,额定电流为20A至50A的保护开关.第001部分:交货技术条件 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2665-001:1999) |
| DIN EN 2665-003-1999 |
航空和航天.三极,恒温,额定电流为20A至50A的保护开关.第003部分:公制端子螺纹 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2665-003:1999) |
| DIN EN 2665-004-1999 |
航空和航天.三极,恒温,额定电流为20A至50A的保护开关.第004部分:UNC端子螺纹.产品标准 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2665-004:1999) |
| DIN EN 2667-6-2003 |
航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:测定水吸收率 |
(Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001) |
| DIN EN 267-1999 |
强制通风式燃油器.定义、要求、试验和标记 |
(Forced draught oil burners - Definitions, requirements, testing, marking; German version EN 267:1999) |
| DIN EN 26704-1991 |
自动疏水阀.分类 |
(Automatic steam traps; classification (ISO 6704:1982); german version EN 26704:1991) |
| DIN EN 26777-1993 |
水质.亚硝酸盐的测定.分子吸收光谱测定法 |
(Water quality; determination of nitrite; molecular absorption spectrometric method (ISO 6777:1984); german version EN 26777:1993) |
| DIN EN 268-1991 |
商品子弹用装药.要求和检验方法 |
(Propellants for commercial ammunition; requirements and test methods; german version EN 268:1991) |
| DIN EN 26801-1993 |
橡胶软管和塑料软管.体积膨胀的测定 |
(Rubber or plastics hoses; determination of volumetric expansion (ISO 6801:1983); German version EN 26801:1993) |
| DIN EN 26802-1993 |
用金属丝增强的橡胶和塑料软管总成.挠曲状态下液压冲击的试验 |
(Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993) |
| DIN EN 26848-1991 |
钨金属的保护气体焊接以及等离子切割和等离子焊接用钨电极.简称(ISO6848-84) |
(Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding; codification (ISO 6848:1984); german version EN 26848:1991) |
| DIN EN 26874-1992 |
牙科学.裂隙封固剂 |
(Dental resin-based pit and fissure sealants (ISO 6874:1988); german version EN 26874:1992) |
| DIN EN 26891-1991 |
木结构.用机械连接件连接.测算承载能力和变形特性的一般原理.(ISO6891-83) |
(Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991) |
| DIN EN 269-1994 |
呼吸防护器.清洁空气.与面罩盖相连接带电动鼓风器的压力软管装置.要求.检验,标识 |
(Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking; German version EN 269:1994) |
| DIN EN 26922-1993 |
粘合剂.对接头抗拉强度的测定 |
(Adhesives; determination of tensile strength of butt joints (ISO 6922:1987); German version EN 26922:1993) |
| DIN EN 26927-1991 |
高层建筑.接缝密封材料.名词术语 |
(Building construction; jointing products; sealants; vocabulary (ISO 6927:1981); german version EN 26927:1990) |
| DIN EN 26948-1991 |
自动疏水阀.生产检验和性能特征检验.(ISO6948-81) |
(Automatic steam traps; production and performance characteristic tests (ISO 6948:1981); german version EN 26948:1991) |
| DIN EN 2695-1994 |
航空和航天.铝合金AL-P6081-T6.薄板和带材0.3 |
(Aerospace series; aluminium alloy AL-P6081-T6; sheet and strip 0,3 mma6 mm; German version EN 2695:1993) |
| DIN EN 270-2000 |
呼吸防护装置.与头盔相连的压缩空气输送管呼吸装置.要求,试验,标记 |
(Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking (including Amendment A1:2000); German version EN 270:1994 + A1:2000) |
| DIN EN 27023-1993 |
包装.包装袋.试验用空袋取样法 |
(Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983); german version EN 27023:1992) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com