标准号 |
中文名称 |
英文名称 |
| prEN 12666-1-2001 |
非压力地下排水和排污用塑料管道系统聚乙烯（PE）.第1部分：管道、配件和系统规范 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| prEN 12684-1996 |
生物技术应用于环境的改良生物遗传变性病毒慎密释放的取样策略指南 |
Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified viruses |
| prEN 12688-1996 |
生物技术应用于环境的改良生物遗传变性病毒的慎密释放的监控策略的指南 |
Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified viruses |
| prEN 12692-1996 |
陶瓷机械安全模制机 |
Ceramic machines - Safety - Presses |
| prEN 12693-1996 |
制冷系统和热泵安全和环境要求制冷压缩机 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Refrigerant compressors |
| prEN 12697-11-2003 |
沥青混合料热搅拌沥青试验方法第11部分：集料和沥青间相容性的测定 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| prEN 12697-12-2003 |
沥青混合料热搅拌沥青试验方法第12部分：沥青试料的水灵敏测定 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| prEN 12697-16-2000 |
沥青混合料热拌合沥青试验方法第16部分：用叠层轮胎做磨耗 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres |
| prEN 12697-17-2001 |
沥青混合物热拌合沥青的试验方法第17部分：多孔沥青标样的粒子损失 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particles loss of porous asphalt specimen |
| prEN 12697-18-1997 |
沥青混合料热拌合沥青试验方法第18部分：多孔沥青的粘结剂排放 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage from porous asphalt |
| prEN 12697-19-2000 |
沥青混合料热拌合沥青试验方法第19部分：试料的渗透性 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen |
| prEN 12697-20-2003 |
沥青混合料热拌合沥青试验方法第20部分：立方体或马歇尔试料的压痕 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or marshall specimens |
| prEN 12697-21-2003 |
沥青混合料热拌合沥青试验方法第21部分：平板试料的压痕 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens |
| prEN 12697-22-2003 |
沥青混合料热拌合沥青试验方法第22部分：轮辙试验 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| prEN 12697-24-1999 |
沥青混合料热拌合沥青试验方法第24部分：抗疲劳性能 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
| prEN 12697-26-1999 |
沥青混合料热拌合沥青试验方法第26部分：劲度 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| prEN 12697-30-2000 |
沥青混合料热拌合沥青试验方法第30部分：制备试料用夯击压实器 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation, impact compactor |
| prEN 12697-31-2000 |
沥青混合料热拌合沥青试验方法第31部分：制备试料用旋转压实器 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation gyratory compactor |
| prEN 12697-33-2003 |
沥青混合料热拌合沥青试验方法第33部分：制备试料用平板压实器 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor |
| prEN 12697-34-1999 |
沥青混合料热拌合沥青试验方法第34部分：马歇尔试验 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test |
| prEN 12697-35-2002 |
沥青混合料热拌合沥青试验方法第３５部分：实验室拌合 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing |
| prEN 12697-38-2002 |
沥青混合料热拌合沥青试验方法第３８部分：试验装置和校准 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Test equipment and calibration |
| prEN 12697-45-2002 |
沥青混合料热拌合沥青试验方法第４５部分：胶粘剂排放Schellenberg法 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Binder drainage; Schellenberg method |
| prEN 12724-1997 |
水基 胶粘剂 持续可燃性的测定（闭环法） |
Adhesives - Water based - Determination of sustained combustibility (closed cup method) |
| prEN 12725-1997 |
建筑玻璃玻璃板墙设计、尺寸和性能 |
Glass in building - Glass block walls - Design, dimensions and performance |
| prEN 12737-1997 |
家蓄用预制混凝土地板 |
Precast concrete floor slats for livestock |
| prEN 12753-1997 |
用于表面处理车间排出废气的热净化装置（焚化炉）安全技术要求 |
Thermal cleaning plants (incinerators) for exhaust gas from surface treatment plants - Safety requirements |
| prEN 12757-1-1997 |
涂层材料的搅拌机械安全要求第1部分：整修车辆表面用涂料的搅拌机械 |
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| prEN 12764-1997 |
卫生洁具 涡流浴盆规范 |
Sanitary appliances - Specification for whirlpool baths |
| prEN 12766-3-2001 |
石油成制品和废油 PCBs和相关产品的测定 第3部分：使用电子俘获探测器通过气相色谱分析（GC）法测定和量 |
Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron ca |
| prEN 12768-1997 |
建筑胶 金属表面处理指南 |
Structural adhesives - Guidelines for the surface preparation of metals |
| prEN 12769-1997 |
鞋类 鞋底试验方法 抗挠曲阻力 |
Footwear - Test methods for outsoles - Flex resistance |
| prEN 12777-1997 |
后勤学 后勤学中的结构、基本术语和定义 |
Logistics - Structure, basic terms and definitions in logistics |
| prEN 12779-1997 |
木工机械 固定式木屑和粉尘排除装置 安全相关性能和安全要求 |
Woodworking machines - Chips- and dust extraction systems with fixed installation - Safety related performance and safety requirements |
| prEN 1279-1-2002 |
建筑玻璃 隔离玻璃装置 第1部分：一般原则 尺寸公差和系统的描述规则 |
Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description |
| prEN 1279-5-2001 |
建筑玻璃 隔离玻璃装置 第5部分：符合性评估 |
Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| prEN 12791-2003 |
化学消毒剂和防腐剂 手术人员消毒剂 试验方法和要求 |
Chemical desinfectants and antiseptics - Surgical hand desinfectants - Test method and requirements (phase 2/step 2) |
| prEN 12794-1997 |
预制混凝土基桩 |
Precast concrete foundation piles |
| prEN 128-1989 |
卫生器具的性能准则和要求 |
Performance criteria and requirements for sanitary appliances |
| prEN 12810-1-2003 |
由预制件构成的脚手架 第1部分：产品规范 |
Facade scaffolds made of prefabricated elements - Part 1: Products specifications |
| prEN 12810-2-2003 |
由预制件构成的脚手架 第2部分：特殊设计和评价方法 |
Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design |
| prEN 12811-1-2003 |
脚手架 性能要求和总体设计 |
Temporary works equipment - Part 1: Scaffolds; Performance requirements and general design |
| prEN 12811-2-2003 |
临时性工程设备 脚手架 第2部分：材料信息 |
Temporary works equipment - Part 2: Information on materials |
| prEN 12812-2003 |
工作架 性能要求和总体设计 |
Falsework - Performance requirements and general design |
| prEN 12813-2003 |
由预制件构成的承载塔 特殊设计和评估方法 |
Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design |
| prEN 12834-2002 |
公路交通和运输通信和信息处理技术（RTTT） 专用近程通讯（DSRC） DSRC应用层 |
Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC application layer |
| prEN 12841-2003 |
预防高空坠落的个人保护设备 工作定位系统 绳索调节装置 |
Personal protective equipment for prevention of falls from a height - Rope access systems - Rope adjustment devices for work positioning |
| prEN 12843-1997 |
预制混凝土杆和柱 |
Precast concrete masts and poles |
| prEN 12851-1997 |
食品加工机械 配备辅助驱动毂的机器给养装置 安全和卫生要求 |
Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
| prEN 12866-1997 |
天然石料开采和加工机械和设备 金刚石线锯安全要求 |
Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws |
| prEN 12867-1997 |
天然石料开采和加工机械的设备 链式和带式立刨床安全要求 |
Machines and plants for mining and tooling of natural stone - Safety requirements for chain and belt slotting machines |
| prEN 12873-1-2003 |
材料对人类生活用水的影响 流动产生的影响 第1部分：非粘结性工厂预制品试验方法 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products |
| prEN 12881-1-1997 |
传输带 燃烧模拟法可燃性试验 第1部分：两米单喷嘴丙烷坑道试验 |
Conveyor belts - Fire simulation flammability testing - Part 1: Two metre single burner propane gallery test |
| prEN 12881-2-2000 |
传输带 燃烧模拟法可燃性试验 第2部分：大规模燃烧试验 |
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
| prEN 12897-2003 |
供水 间接加热无排水口（封闭）热水贮存系统规范 |
Water supply - Specification for indirectly heated unvented (closed) storage water heaters |
| prEN 12899-2-1998 |
公路设备 固定立式公路交通标志 第2部分：穿透照射交通标柱 |
Road equipment - Fixed, vertical road signs - Part 2: Transilluminated traffic bollards |
| prEN 12899-4-2002 |
固定立式公路交通标志 第4部分 工业生产控制 |
Fixed, vertical road traffic signs - Part 4: Factory production control |
| prEN 12899-5-2002 |
固定立式公路交通标志 第5部分 首次型式试验 |
Fixed, vertical road traffic signs - Part 5: Initial type testing |
| prEN 12917-1997 |
玻璃纤维加强塑料（GRP）制地下罐 用于液体石油燃料无压贮存的卧式柱罐 EN976-1和EN976-3的符合性评价 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Assessment of conformity to EN 976-1 and EN 976-3 |
| prEN 12921-1-1997 |
使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第1部分：通用安全要求 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| prEN 12921-2-1997 |
使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第2部分： 使用水基清洗液的机器安全性 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
| prEN 12921-3-1997 |
使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第3部分使用液体或蒸气的对工业品进行表面清洁和预 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
| prEN 12921-4-1997 |
使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第4部分：使用卤化溶剂的机器安全性 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents |
| prEN 12927-1-1997 |
索道客运的安全要求 钢索 第1部分：钢索及其端部接头的选择准则 |
Safety requirements for passenger transport by rope - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| prEN 12927-2-1999 |
索道客运的安全要求 钢索 第2部分：安全系数 |
Safety requirements for passenger transportation by rope - Ropes - Part 2: Safety factors |
| prEN 12927-3-1997 |
索道客运的安全要求 钢索 第3部分：六股牵引、承载-牵引和拖拉钢索的长绞接 |
Safety requirements for passenger transport by rope - Ropes - Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes |
| prEN 12927-4-2001 |
索道客运的安全要求 钢索 第4部分：端部接头 |
Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing |
| prEN 12927-5-1997 |
索道客运的安全要求 钢索 第5部分：贮存、运输、安装和拉伸 |
Safety requirements for passenger transportation by rope - Ropes - Part 5: Storage, transportation, installation and tensioning |
| prEN 12927-6-1999 |
索道客运的安全要求 钢索 第6部分：报废标准 |
Safety requirements for passenger transport by rope - Ropes - Part 6: Discard criteria |
| prEN 12927-7-1998 |
索道客运的安全要求 钢索 第7部分：计算、修理和维护 |
Safety requirements for passenger transportation by rope - Ropes - Part 7: Calculation, repair and maintenance |
| prEN 12927-8-1998 |
索道客运的安全要求 钢索 第8部分：无损检测 |
Safety requirements for passenger transportation by rope - Ropes - Part 8: Non-destructive testing |
| prEN 12929-1-1997 |
索道客运的安全要求 总则 第1部分：对所有设备的要求 |
Safety requirements for passenger transportation by rope - General provisions - Part 1: Requirements for all installations |
| prEN 12929-2-1998 |
索道客运的安全要求 总则 第2部分：不带运输车制动器的可反向双线架空索道的附加要求 |
Safety requirements for passenger transportation by rope - General provisions - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
| prEN 12930-1997 |
索道客运的安全要求 计算 |
Safety requirements for passenger transportation by rope - Calculations |
| prEN 12937-1997 |
机械安全性 可动和升降机械的技术原理和指标 |
Safety of machinery - Technical principles and specifications for mobility and for lifting |
| prEN 12949-1997 |
肥料 命名和规范 |
Fertilizers - Denominations and specifications |
| prEN 12951-2002 |
屋面预制件 永久性固定顶梯 |
Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods |
| prEN 12952-11-2003 |
水管锅炉及附属设备 第11部分：锅炉和附属设备限制装置及安全电路的要求 |
Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| prEN 12952-14-2000 |
水管锅炉及附属设备 第14部分：烟气DENOX系统的要求 |
Water-tube boilers and auxilliary installations - Part 14: Requirements for flue gas DENOX-systems |
| prEN 12953-9-2003 |
壳式锅炉 第9部分：锅炉和附属设备限制装置及安全电路的要求 |
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| prEN 12966-1-2002 |
立式公路标志 可变信息交通标志 |
Vertical road traffic signs - Part 1: Variable message signs |
| prEN 12966-2-2002 |
立式公路标志 可变信息交通标志 |
Vertical road traffic signs - Part 2: Variables message traffic signs; Initial type testing |
| prEN 1297-2001 |
防水挠性薄板、屋顶防水用沥青、塑料和橡胶薄板 长期暴露在紫外光辐射的高温和水综合环境下的人工老化方法 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| prEN 12981-1997 |
喷镀设备 有机粉状涂料喷镀间 安全要求 |
Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| prEN 12984-1997 |
食品加工机械 便携式和/或手动机械及配备机械驱动切削工具的设备 安全和卫生要求 |
Food processing machinery - Portable and/or hand-operated machines and appliances equipped with mechanically driven cutting tools - Safety and hygiene requirements |
| prEN 12986-1997 |
皮革 物理和机械试验 表观密度的测定 |
Leather - Physical and mechanical tests - Determination of apparent density |
| prEN 12992-1997 |
皮革 物理和机械试验 水汽吸收率的测定 |
Leather - Physical and mechanical tests - Determination of water vapour absorption |
| prEN 12993-1997 |
皮革 物理和机械试验 收缩温度测定 |
Leather - Physical and mechanical tests - Determination of shrinkage temperature |
| prEN 12994-1997 |
皮革 物理和机械试验 耐干热性测定 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather |
| prEN 12995-1997 |
皮革 物理和机械试验 抗拉强度和延伸百分率的测定 |
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension |
| prEN 12996-1997 |
皮革 物理和机械试验 撕裂负载测定 双边撕裂 |
Leather - Physical and mechanical tests - Determination of tear load - Double edge tear |
| prEN 12997-1997 |
皮革 物理和机械试验 撕裂负载测定 单边撕裂 |
Leather - Physical and mechanical tests - Determination of tear load - Single edge tear |
| prEN 12998-1997 |
皮革 物理和机械试验 抗粒面开裂性和粒面指数的测定 |
Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index |
| prEN 13000-1997 |
升降机 安全性 可动升降机 |
Cranes - Safety - Mobile cranes |
| prEN 13001-1-1997 |
升降机安全性 总体设计 第1部分：一般原理和要求 |
Crane safety - General design - Part 1: General principles and requirements |
| prEN 13001-2-1997 |
升降机安全性 总体设计 第2部分：负载效应 |
Crane safety - General design - Part 2: Load effects |
| prEN 13002-3-1998 |
碳纤维丝线 第3部分：技术规范 |
Carbon filament yarns - Part 3: Technical specifications |
| prEN 13013-3-1997 |
建筑物温湿性能 气象数据 根据每小时记录的风雨数据计算立面倾盆大雨指数 |
Hydrothermal performance of buildings - Climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data |
| prEN 13020-1997 |
路面处理机械 安全要求 |
Road-surface-treatment machines - Safety requirements |
| prEN 13022-1-2002 |
建筑物玻璃 建筑密封玻璃窗 第1部分：作用、要求和术语 |
Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems; Supported and unsupported monolithic and multiple glazing |
| prEN 13022-2-2003 |
建筑物玻璃 建筑密封玻璃窗 第2部分：玻璃 |
Glass in building - Structural sealant glazing - Part 2: Product standard for ultra-violet resistant sealant and structural sealant |
| prEN 13022-3-2003 |
建筑物玻璃 建筑密封玻璃窗 第3部分：密封 试验方法 |
Glass in building - Structural sealant glazing - Part 3: Assembly rules |
| prEN 13022-4-1997 |
建筑物玻璃 建筑密封玻璃窗 第4部分：装配规则 |
Glass in building - Structural sealant glazing - Part 4: Assembly rules |
| prEN 13024-2-2001 |
建筑物玻璃 热固化硼硅酸盐安全玻璃 第2部分：合格评价 |
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity |
| prEN 130310-1993 |
分规范：非固体电解质铝电解质电容器(能力批准) |
Sectional specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval) |
| prEN 130311-1993 |
空白详细规范：非固体电解质铝电解质电容器(能力批准) |
Blank detail specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval) |
| prEN 13032-1-2003 |
照明设备 灯和发光体光度数据的测量和表述 第1部分：测量 |
Light and lighting - Measurements and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| prEN 13034-2002 |
液态化学制品防护服 对液态化学品具有有限保护作用的化学防护服的性能要求（6型设备） |
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 equipment) |
| prEN 13035-10-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第10部分：研磨和抛光机 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 10: Grinding and polishing machines |
| prEN 13035-11-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第11部分：钻机 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| prEN 13035-13-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第13部分：层压玻璃生产用机械 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 13: Machines for the production of laminated glass |
| prEN 13035-14-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第14部分：镜面喷镀设备 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 14: Mirror coating plant |
| prEN 13035-5-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第5部分：堆卸机械装置 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and destacking |
| prEN 13035-6-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第6部分：卸货机 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break out |
| prEN 13035-7-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第7部分：层压玻璃裁切机 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
| prEN 13035-8-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第8部分：生产保温玻璃用的机械和设备 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 8: Machines and plants for production of insulating glass |
| prEN 13035-9-1997 |
平板玻璃制造、处理和加工用机械和设备 安全要求 第9部分：洗涤装置 |
Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| prEN 13036-2-2002 |
公路和机场地面特性 试验方法 第2部分：路面抗滑性测定步骤 |
Road and airfield surface characteristics - Test methods - Part 2: Procedure for determination of skid resistance of a pavement surface |
| prEN 130400-1992 |
分规范：金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
Sectional specification: fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
| prEN 130401-1992 |
空白详细规范：固定化金属聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
Blank detail specification: fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com