标准号 |
中文名称 |
英文名称 |
BS EN 60169-24-1994 |
射频连接器.带有螺旋耦合器的射频同轴连接器,主要用于75ΩF型电缆分配系统 |
(Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)) |
BS EN 60169-25-1994 |
射频连接器.同带有内孔的外导体直径为13.56mm(0.534in)TWHN型双内导体的屏蔽对称电缆一起使用双柱螺旋 |
((Radio-frequency connectors - Two-pole screw () |
BS EN 60172-1996 |
测定漆包绕组线温度指数的试验规程 |
(Test procedure for the determination of the temperature index of enamelled winding wires) |
BS EN 60182-2-1991 |
线圈线基本尺寸.第2部分:漆包圆线圈线最大全径规范 |
(Basic dimensions of winding wires - Specification for maximum overall diameters of enamelled round winding wires) |
BS EN 60188-2001 |
高压汞蒸气灯.性能规范 |
(High-pressure mercury vapour lamps - Performance specifications) |
BS EN 60191-3-2000 |
半导体器件的机械标准化.集成电路略图绘制的一般规则 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of integrated circuits) |
BS EN 60191-4-2000 |
半导体器件的机械标准化.半导体器件封装外壳形式的分类和编码系统 |
(Mechanical standardization of semiconductor devices - Coding system and classification into forms of package outlines for semiconductor device packages) |
BS EN 60191-6-1-2002 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.海鸥翼式铅终端的设计指南 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals) |
BS EN 60191-6-10-2004 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.P-VSON尺寸 |
|
BS EN 60191-6-10-2004 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.P-VSON的尺寸 |
|
BS EN 60191-6-12-2002 |
半导体器件机械标准化.表面安装的半导体器件封装图形图绘制的一般规则.细微间距栅级阵列(FLGA)的设计规则. |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch land grid arr) |
BS EN 60191-6-2-2002 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.1.5mm、1.27mm和1.00mm树脂球和引线 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,0) |
BS EN 60191-6-3-2001 |
半导体装置的机械标准化.表面固定半导体装置包装轮廓线绘制的一般规则.包装尺寸的测量方法 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions) |
BS EN 60191-6-4-2003 |
半导体器件的机械标准化.绘制表面安装半导体器件封装外形图的一般规则.焊球网格阵列封装尺寸的测量方法 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions) |
BS EN 60191-6-5-2001 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.小螺距球栅阵列的设计指南 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitchball grid arra) |
BS EN 60191-6-6-2001 |
半导体装置的机械标准化.表面固定的半导体装置包装的轮廓绘制准备的一般要求.设计指南 |
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid array (FLGA) |
BS EN 60191-6-8-2001 |
半导体器件的机械标准化.表面安装半导体器件封装外形图绘制的一般规则.玻璃密封陶瓷方型扁平封装的设计指南 |
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack (G-QFP) |
BS EN 60192-2001 |
低压钠蒸气灯.性能规范 |
Low pressure sodium vapour lamps - Performance specification |
BS EN 602-1995 |
铝和铝合金.锻制品.用与食品接触的材料生产的半成品的化学组成 |
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food |
BS EN 602-2004 |
铝和铝合金.锻件.与食品接触的产品制造用半成品的化学成分 |
|
BS EN 60204-1-1998 |
机械安全.机械用电设备.一般要求 |
Safety of machinery - Electrical equipment of machines - General requirements |
BS EN 60204-11-2001 |
机器的安全.机器的电气设备.电压大于1000V交流电或1500V直流电不超过36KV的设备的要求 |
Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
BS EN 60204-31-1998 |
机械安全.机械用电气设备.锯,单和系统的特殊要求 |
Safety of machinery - Electrical equipment of machines - Particular safety and EMC requirements for sewing machines, units and systems |
BS EN 60204-32-1998 |
机械安全.机器的电气设备.提升机的要求 |
(Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines) |
BS EN 60205-2001 |
磁性零件有效参数的计算 |
Calculation of the effective parameters of magnetic piece parts |
BS EN 60214-1-2003 |
抽头转换开关.性能要求和试验方法 |
(Tap-changers - Performance requirements and test methods) |
BS EN 60214-1998 |
带载分接开关 |
On-load tap-changers |
BS EN 60215-1990 |
对无线电发射设备的安全要求 |
Safety requirements for radio transmitting equipment |
BS EN 60216-1-2002 |
电绝缘材料耐热性能的测定指南.老化法和试验结果的评定 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results |
BS EN 60216-3-2002 |
电绝缘材料.耐热性能.耐热性计算说明 |
Electrical insulating materials - Thermal endurance properties - Instructions for calculating thermal endurance characteristics |
BS EN 60216-4-2-2001 |
电绝缘材料耐热性能的测定导则.电绝缘材料,耐热特性.温度达300摄氏度的精度炉 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Precision ovens for use up to 300 鳦 |
BS EN 60216-4-3-2000 |
电绝缘材料耐热性能的测定导则.电气绝缘材料.耐热特性.老化炉,多室炉 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Ageing ovens - Multi-chamber ovens |
BS EN 60216-5-2003 |
电绝缘材料.耐热特性.绝缘材料的相对耐热指数(RTE)的测定 |
(Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material) |
BS EN 60216-6-2004 |
电绝缘材料.耐热性能.使用固定时间框法测定绝缘材料的耐热指数(TI和RTE) |
|
BS EN 60216-6-2004 |
电绝缘材料.耐热性能.使用固定时间框法测定绝缘材料的耐热指数(TI和RTE) |
|
BS EN 60228-2005 |
绝缘电缆导线 |
|
BS EN 60230-2002 |
电缆及其附件的冲击电压试验 |
Impulse tests on cables and their accessories |
BS EN 60238-1999 |
埃德森螺纹灯座 |
Edison screw lampholders |
BS EN 60239-1997 |
电弧炉用的带螺纹座和连接销的圆柱形机加工石墨电极的公称尺寸 |
(Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces) |
BS EN 60240-1-1994 |
工业加热用电红外发射器的特性.第1部分:短波红外发射器 |
Characteristics of electric infra-red emitters for industrial heating - Short wave infra-red emitters |
BS EN 60243-1-1998 |
固体绝缘材料介电强度的试验方法.电源频率下的试验 |
Methods of test for electric strength of solid insulating materials - Tests at power frequencies |
BS EN 60243-2-2001 |
固体绝缘材料介电强度的试验方法.用直流电压测试的补充要求 |
(Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage) |
BS EN 60243-3-2002 |
固体绝缘材料介电强度的试验方法.1.2/50 |
(Methods of test for electric strength of solid insulating materials - Additional requirements for 1,2/50) |
BS EN 60244-1-2000 |
无线电发射机的测量方法.广播发射机的总特征 |
(Methods of measurement for radio transmitters - General characteristics for broadcast transmitters) |
BS EN 60244-10-1993 |
无线电发射机的测量方法.第10部分:采用插入测试信号的电视发射机和差转机的测量方法 |
(Methods of measurement for radio transmitters - Methods of measurement for television transmitters and transposers employing insertion test signals) |
BS EN 60244-11-1993 |
无线电发射机测量方法.第11部分:调频声广播用转发器 |
(Methods of measurement for radio transmitters - Transposers for FM sound broadcasting) |
BS EN 60244-12-1-1994 |
无线电发射机的测量方法.第12部分:音响设备和电视播放设备用发射机和换位器的草拟说明导则.第1节:规定特性 |
(Methods of measurement for radio transmitters - Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Characteristics to be specified) |
BS EN 60244-12-2-1994 |
无线电发射机的测量方法.声音和电视广播用发射机和差转机的草拟说明导则.说明卡 |
(Methods of measurement for radio transmitters - Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Specification sheets) |
BS EN 60244-13-1993 |
无线电发射机的测量方法.第13部分:调频播音的特有性能 |
(Methods of measurement for radio transmitters - Performance characteristics for FM sound broadcasting) |
BS EN 60244-14-1997 |
无线电发射机测量方法.一个或多个使用一样或邻近天线的发射机外部互调产品 |
(Methods of measurement for radio transmitters - External intermodulation products caused by two or more transmitters using the same or adjacent antennas) |
BS EN 60244-15-2000 |
无线电发射机的测量方法.声音广播用调幅发射机 |
(Methods of measurement for radio transmitters - Amplitude-modulated transmitters for sound broadcasting) |
BS EN 60244-5-1995 |
无线电发射机的测量方法.第5部分:电视发射机的特性 |
(Methods of measurement for radio transmitters - Performance characteristics of television transmitters) |
BS EN 60244-8-1995 |
无线电发射机测量方法.第8部分:用做测试电视发射机和差转机的残留边带解调器的特性 |
(Methods of measurement for radio transmitters - Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers) |
BS EN 60244-9-1995 |
无线电发射机的测量方法.第9部分:电视换位器的特性 |
(Methods of measurement for radio transmitters - Performance characteristics for television transposers) |
BS EN 60247-2004 |
)和直流电阻率的测量 |
BS EN 60247-2004 |
BS EN 60249-1-1983 |
印制电路板用基材.第1部分:试验方法 |
(Base materials for printed circuits - Base materials for printed circuits - Test methods) |
BS EN 60249-2-11-1990 |
规范.多层印制电路板生产用普通级别的环氧树脂纺织玻璃纤维覆铜层压薄板规范规范. |
(Specifications - Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards) |
BS EN 60249-2-12-1990 |
规范.多层印制板生产用限定燃烧特性的环氧织造玻璃纤维覆铜层压板 |
(Specifications - Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards) |
BS EN 60249-2-13-1990 |
印制电路板用基材.第2部分:规范.第13节:通用绕性覆铜聚酰亚胺薄膜 |
(Base material for printed circuits - Specifications - Flexible copper-clad polyimide film, general purpose grade) |
BS EN 60249-2-14-1990 |
规范.限定燃烧特性的酚醛多孔覆铜层压板(垂直燃烧试验),经济性 |
(Specifications - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality) |
BS EN 60249-2-15-1991 |
印制电路用基材.第2部分:规范.第15号规范:规定的易燃性的软覆铜聚酰亚胺薄膜 |
(Specifications - Flexible copper-clad polyimide film, of defined flammability) |
BS EN 60249-2-16-1992 |
规范.第16号规范:规定可燃性(立式燃烧性试验)的聚酰亚胺玻璃纤维覆铜箔叠层板 |
(Specifications - Specification No. 16 - Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
BS EN 60249-2-17-1992 |
规范.第17号规范:制造多层印制板用的规定可燃性的酰亚胺玻璃纤维编织的覆铜箔叠板 |
(Specifications - Specification No. 17 - Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards) |
BS EN 60249-2-18-1992 |
规范.第18号规范:规定可燃性的(立式耐燃性试验)的比斯码勤米德(bismaleimide)/三嗪改型环氧化物玻璃纤维编 |
(Specifications - Specification No. 18 - Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
BS EN 60249-2-19-1992 |
规范.第19号规范.制造多层印制板用的规定可燃性能的薄比斯玛勒米德(bismaleimide)/三嗪改型的环氧化物纺织 |
(Specifications - Specification No. 19 - Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer prin) |
BS EN 60249-2-1992 |
规范.第19号规范:用在印制电路板生产的规定可燃性的比斯码勤米德(bismaleimide)/三嗪改型氧化物玻璃纤维编 |
(Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printe) |
BS EN 60249-2-2-1990 |
规范.酚醛纤维素纸覆铜层压板,经济质量的规范. |
(Specifications - Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality) |
BS EN 60249-2-5-1994 |
规范.第5号规范:规定易燃性的环氧化合物编织的玻璃纤维覆铜层压板(垂直燃烧试验) |
(Specifications - Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
BS EN 60249-2-6-1994 |
规范.第6号规范:具有规定易燃性的酚醛纤维素纸覆铜层压板(水平燃烧试验) |
(Specifications - Specification No.6 - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)) |
BS EN 60249-2-7-1994 |
规范.第7号规范:规定易燃性的酚醛纤维素纸覆铜层压板(垂直燃烧试验) |
(Specifications - Specification No.7 - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)) |
BS EN 60249-2-8-1990 |
印制电路用基材.规范.挠性铜基聚酯薄膜规范 |
(Specifications - Specification for flexible copper-clad polyester (PETP) film) |
BS EN 60252-1-2002 |
交流电动机的电容器.总则.性能、试验和额定值.安全要求.安装和操作指南 |
(A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation) |
BS EN 60252-2-2003 |
交流电动机电容器.电动机起动电容器 |
(A.C. motor capacitors - Motor start capacitors) |
BS EN 60254-1-1997 |
牵引酸性铅蓄电池.一般要求和试验方法 |
(Lead-acid traction batteries - General requirements and methods of test) |
BS EN 60254-1-2005 |
牵引铅酸蓄电池.一般要求和试验方法 |
|
BS EN 60254-2-1997 |
牵引用铅酸蓄电池.第2部分:电池的尺寸、终端及电池的两极标记 |
(Lead-acid traction batteries - Dimensions of cells and terminals and marking of polarity on cells) |
BS EN 60255-21-1-1989 |
继电器.继电器和保护设备上振动、冲击、碰撞和地震的测试.振动试验(正弦波) |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Vibration tests (sinusoidal)) |
BS EN 60255-21-2-1989 |
继电器.继电器和保护设备上振动、冲击、碰撞和地震的测试.冲击和碰撞试验 |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Shock and bump tests) |
BS EN 60255-21-3-1993 |
继电器.第21部分:继电器和保护设备测量时的振动、冲击、撞击和地震试验.第三节.地震试验 |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Seismic tests) |
BS EN 60255-22-2-1997 |
继电器.测量继电器和保护设备的电干扰试验.静电放射试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrostatic discharge tests) |
BS EN 60255-22-3-2001 |
继电器.测量继电器和保护设备的电干扰试验.辐射电磁场干扰试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests) |
BS EN 60255-22-4-2002 |
电气继电器.评估继电器和保护设备的电气干扰试验.电器快速瞬间/短促消隐脉冲试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test) |
BS EN 60255-22-5-2002 |
继电器.量值继电器的的电干扰试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Surge immunity test) |
BS EN 60255-22-6-2001 |
继电器.测量继电器和保护设备的电干扰试验.抗射频场引起的馈电线感应干扰试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields) |
BS EN 60255-22-7-2003 |
电气继电器.测量继电器和保护设备的电干扰试验.工频抗扰试验 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests) |
BS EN 60255-23-1997 |
继电器.触点性能 |
(Electrical relays - Contact performance) |
BS EN 60255-24-2001 |
继电器.电力系统数据交换的通用格式 |
(Electrical relays - Common format for transient data exchange (COMTRADE) for power systems) |
BS EN 60255-25-2000 |
继电器.测量继电器和保护设备的电磁辐射试验 |
(Electrical relays - Electromagnetic emission tests for measuring relays and protection equipment) |
BS EN 60255-3-1998 |
继电器.与时间有关或无关的单输入励磁质量测量继电器 |
(Electrical relays - Single input energizing quantity measuring relays with dependent or independent time) |
BS EN 60255-5-2001 |
继电器.测量继电器和保护设备的绝缘协调性.要求和试验 |
(Electrical relays - Insulation coordination for measuring relays and protection equipment - Requirements and tests) |
BS EN 60255-6-1995 |
电子继电器.测量继电器和保护装置 |
(Electrical relays - Measuring relays and protection equipment) |
BS EN 60255-8-1998 |
继电器.热继电器 |
(Electrical relays - Thermal electrical relays) |
BS EN 60264-1-1992 |
绕组线的封装.第1部分:圆绕组线线筒 |
(Packaging of winding wires - Containers for round winding wires) |
BS EN 60264-2-1-1992 |
绕组线的封装.第2部分:圆桶形输出线轴.第1节:基本尺寸 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Basic dimensions) |
BS EN 60264-2-2-1992 |
绕组线的封装.圆柱形筒装交货线盘.热塑性材料可回收线盘规范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material) |
BS EN 60264-2-3-1992 |
绕组线的封装.第2部分:圆桶形输出线轴.第3节:由热塑性材料制成的不能回收使用的绕线轴规范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material) |
BS EN 60264-3-1-2000 |
绕组线的封装.锥形输出线轴.基本尺寸 |
(Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions) |
BS EN 60264-3-2-1999 |
绕组线的封装.锥形输出线轴.热塑性材料制可回收使用的线轴规范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials) |
BS EN 60264-3-3-1992 |
绕组线的封装.圆锥形筒装交货线盘.热塑性材料不可回收线盘规范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material) |
BS EN 60264-3-4-1999 |
绕组线的封装.锥形输出线轴.锥形输出线轴外壳的基本尺寸 |
(Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools) |
BS EN 60264-3-5-1999 |
绕组线的包装.锥形筒输出线轴.热塑材料制成的线轴容器规范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material) |
BS EN 60264-4-1-1992 |
绕组线的封装.第4部分:试验方法.第1节:热塑性塑料制成的输出线轴 |
(Packaging of winding wires - Methods of test - Delivery spools made from thermoplastic material) |
BS EN 60264-4-2-1992 |
绕组线的封装.第4部分:试验方法.第2节:热固性塑料制成的锥形筒式供带盘容器 |
(Packaging of winding wires - Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools) |
BS EN 60264-5-1-1997 |
绕组线的封装.圆绕组线线筒 |
(Packaging of winding wires - Cylindrical barrelled delivery spools with conical flanges - Basic dimensions) |
BS EN 60264-5-2-2001 |
绕组线的封装.带锥形法兰的圆柱桶.热塑材料做的可回收的卷筒规范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material) |
BS EN 60265-1-1998 |
高压开关规范.额定电压大于1kV小于52kV的开关 |
(Specification for high-voltage switches - Switches for rated voltages above 1 kV and less than 52 kV) |
BS EN 60265-2-1991 |
高压开关设备规范.额定电压为52KV及其以上的高压开关 |
(Specification for high-voltage switches - Specification for high-voltage switches - High-voltage switches for rated voltages of 52 kV and above) |
BS EN 60268-12-1995 |
音响系统设备.广播及类似用途用连接器的应用 |
(Sound system equipment - Application of connectors for broadcast and similar use) |
BS EN 60268-16-2003 |
音响系统设备.用语音传输系数测定语音清晰度的目标额定功率 |
(Sound system equipment - Objective rating of speech intelligibility by speech transmission index) |
BS EN 60268-3-2001 |
音响系统设备.放大器 |
(Sound system equipment - Amplifiers) |
BS EN 60268-4-2004 |
音响系统设备.传声器 |
|
BS EN 60268-5-2003 |
音响系统设备.扬声器 |
(Sound system equipment - Loudspeakers) |
BS EN 60268-7-1996 |
音响系统设备.头戴受话器及耳机 |
(Sound system equipment - Headphones and earphones) |
BS EN 60269-1-1999 |
低压熔断器.一般要求 |
(Low-voltage fuses - General requirements) |
BS EN 60269-2-1988 |
低压熔断器.专职人员使用的熔断器的补充要求 |
(Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)) |
BS EN 60269-3-1995 |
低压熔断器.非专业人员用熔断器的补充要求(主要是家用和类似用途用熔断器) |
(Low-voltage fuses - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)) |
BS EN 60269-4-1-2002 |
低压熔断器.第4-1部分:半导体器件用熔断体的补充要求.第1-3节:标准化的熔断体类型实例 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links) |
BS EN 60269-4-1988 |
低压熔断器.半导体器件防护用熔断体的补充要求 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices) |
BS EN 60270-2001 |
高电压试验技术.部分放电测量 |
(High-voltage test techniques - Partial discharge measurements) |
BS EN 60276-1988 |
碳刷、刷握、换向器和滑环的定义和名称 |
(Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings) |