标准号 |
中文名称 |
英文名称 |
DIN EN ISO 6876-2003 |
牙科牙根管充填材料 |
(Dental root canal sealing materials (ISO 6876:2001); German version EN ISO 6876:2002) |
DIN EN ISO 6877-1998 |
牙科用牙根管充填针 |
Dental root-canal obturating points (ISO 6877:1995); German version EN ISO 6877:1998 |
DIN EN ISO 6878-2004 |
水质.磷的测定.第1部分:钼酸铵的光谱测定法 |
|
DIN EN ISO 6885-2000 |
动植物脂肪和油.茴香胺值的测定 |
Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:1998); German version EN ISO 6885:2000 |
DIN EN ISO 6887-1-1999 |
食品和动物饲料的微生物学.用于微生物检验的初始悬浮和十倍制稀释的试验样品的制备.第1部分:初始悬浮和十倍制稀释液制备的一般规则 |
Microbiology of food and animal feeding stuffs - Preparation of the test samples, of initial suspension and of decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (I |
DIN EN ISO 6887-2-2004 |
食品和动物饲料的微生物学.用于微生物检验的试验样品的初始悬浮和十倍制稀释的准备.第2部分:肉和肉制品准备 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO 6887-2:2003); German versi) |
DIN EN ISO 6887-2-2004 |
食品和动物饲料的微生物学.用于微生物检验的试验样品的初始悬浮和十倍制稀释的准备.第2部分:肉和肉制品准备的特殊规则 |
|
DIN EN ISO 6888-1-1999 |
食品和动物饲料的微生物学.凝胶水平计数方法(阳性葡萄球菌和其它属).第1部分:用Baird-Parke琼脂培养基技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium (ISO 6888-1:1999); German version EN IS |
DIN EN ISO 6888-2-1999 |
食品和动物饲料的微生物学.凝胶水平计数方法(阳性葡萄球菌和其它属).第2部分: 兔原生质血纤蛋白质琼脂培养基技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999); German v |
DIN EN ISO 6888-3-2003 |
食品和动物饲料微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法.第3部分:低数值探测和 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003); German version E |
DIN EN ISO 6888-3-2005 |
食品和动物饲料的微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法.第3部分:低数值检测和MPN技术 |
|
DIN EN ISO 6926-2001 |
声学.声功率级测定用基准声源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000); German version EN ISO 6926:2001 |
DIN EN ISO 694-2001 |
船和造船技术.船上磁罗盘的定位 |
Ships and marine technology - Positioning of magnetic compasses in ships (ISO 694:2000); German version EN ISO 694:2001 |
DIN EN ISO 6940-1995 |
织物.耐燃性.垂直定向样品的易燃性的测定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:1984, including Amendment 1:1993); German version EN ISO 6940:1995 |
DIN EN ISO 6940-2004 |
纺织织物.燃烧性能.垂直向样品易点燃性的测定 |
|
DIN EN ISO 6941-1995 |
织物.耐燃性.垂直定向样品延燃性的测定 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941, including Amendment 1:1992); German version EN ISO 6941:1995 |
DIN EN ISO 6941-2004 |
纺织物.燃烧性能.垂直定向试品火焰蔓延性的测量 |
|
DIN EN ISO 6942-2002 |
防护服装.防热和防火用服装的试验方法.对受到辐射热源影响时的材料和材料组件的评定 |
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002); German version EN ISO 6942:2002 |
DIN EN ISO 6945-2000 |
橡胶软管.外涂层耐磨性的测定 |
Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 |
DIN EN ISO 6946-1996 |
建筑组件.热导通阻力和热传递率.计算方法 |
Building components - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996); German version EN ISO 6946:1996 |
DIN EN ISO 6947-1997 |
焊缝.工作位置.倾斜角和旋转角的定义 |
Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993); German version EN ISO 6947:1997 |
DIN EN ISO 6974-1-2002 |
天然气.用气相色谱法测定规定的不确定度组分.第1部分: 特定分析导则 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1:2000); German version EN ISO 6974-1:2001 |
DIN EN ISO 6974-2-2002 |
天然气.用气相色谱法测定规定的不确定度组分.第2部分:测量系统特征和数据处理统计资料 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001); German version EN ISO 6974-2:2002 |
DIN EN ISO 6974-3-2002 |
天然气.用气相色谱法测定规定的不确定度组分.第3部分:用两填充柱测定氢、氦、氧、氮、二氧化碳和C以上烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C using two packed columns (ISO 6974-3:2000); German version EN |
DIN EN ISO 6974-4-2002 |
天然气.用气相色谱法测定规定的不确定度组分.第4部分:用两填充柱测定实验室和在线测量系统的氮、二氧化碳和C和的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000); |
DIN EN ISO 6974-5-2002 |
天然气.用气相色谱法测定规定的不确定度组分.第5部分:用三填充柱测定实验室和在线测量系统的氮、二氧化碳和C和的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-5:20 |
DIN EN ISO 6975-2005 |
天然气.延伸分析.气相色谱法 |
|
DIN EN ISO 6976-2005 |
天燃气.热值、密度和相对密度及化合物沃泊指数的计算 |
|
DIN EN ISO 6978-1-2005 |
天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样 |
|
DIN EN ISO 6978-2-2005 |
天然气.汞的测定.第2部分:用金/铂合金混汞法对汞的采样 |
|
DIN EN ISO 6988-1997 |
金属涂层和其它无机物涂层.在一般水分冷凝作用下的二氧化硫试验 |
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994 |
DIN EN ISO 7027-2000 |
水质.混浊度的测定 |
Water quality - Determination of turbidity (ISO 7027:1999); German version EN ISO 7027:1999 |
DIN EN ISO 7029-2001 |
声学.龄期听力阈的统计分布(ISO 7029:2000) |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000); German version EN ISO 7029:2000 |
DIN EN ISO 703-1-2000 |
传送带.横向挠性和可成槽形性.第1部分:试验方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999); German version EN ISO 703-1:1999 |
DIN EN ISO 7040-1998 |
1型通用扭矩六角螺母(用非金属垫圈).强度等级5,8和10 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997); German version EN ISO 7040:1997 |
DIN EN ISO 7042-1998 |
2型通用扭矩六角螺母(用全金属螺母).强度等级5,8,10和12 |
Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 (ISO 7042:1997); German version EN ISO 7042:1997 |
DIN EN ISO 7045-1994 |
H型或Z型十字槽平头螺钉.产品等级A |
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994); German version EN ISO 7045:1994 |
DIN EN ISO 7046-1-1994 |
带H型或Z型十字槽的沉头螺钉(通用头).产品等级A.第1部分:强度等级4.8 |
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994 |
DIN EN ISO 7046-2-1994 |
十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属 |
Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994 |
DIN EN ISO 7047-1994 |
带H型或Z型十字槽半圆头沉头螺钉.产品等级A |
Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994); German version EN ISO 7047:1994 |
DIN EN ISO 7048-1998 |
带十字槽的圆柱头螺钉 |
Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998 |
DIN EN ISO 707-1997 |
奶乳和乳制品.取样导则 |
Milk and milk products - Guidance on sampling (ISO 707:1997); German version EN ISO 707:1997 |
DIN EN ISO 7085-2000 |
表面淬火和回火的米制滚螺纹螺钉的机械和性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999 |
DIN EN ISO 7088-2005 |
鱼粉.词汇 |
|
DIN EN ISO 7089-2000 |
平垫圈.标准系列.产品等级A |
Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000 |
DIN EN ISO 7090-2000 |
倒角平垫圈.标准系列.产品等级A |
Plain washers, chamfered - Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000 |
DIN EN ISO 7091-2000 |
平垫圈.标准系列.产品等级C |
Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000 |
DIN EN ISO 7092-2000 |
平垫圈.小型系列.产品等级A |
Plain washers - Small series, Product grade A (ISO 7092:2000); German version EN ISO 7092:2000 |
DIN EN ISO 7093-1-2000 |
平垫圈.大型系列.第1部分:产品等级A |
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000 |
DIN EN ISO 7093-2-2000 |
平垫圈.大型系列.第2部分:产品等级C |
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000 |
DIN EN ISO 7094-2000 |
平垫圈.特大型系列.产品等级C |
Plain washers - Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000 |
DIN EN ISO 7096-2001 |
土方机械.驾驶员座椅振动的实验室评价 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000); German version EN ISO 7096:2000 |
DIN EN ISO 7142-2004 |
色漆和清漆用粘合剂.环氧树脂.通用试验方法 |
|
DIN EN ISO 7143-2004 |
色漆、清漆和粘合剂.表征水基涂层材料和粘合剂的试验方法 |
|
DIN EN ISO 7153-1-2001 |
外科仪器.金属材料.第1部分:不锈钢 |
Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000 |
DIN EN ISO 717-1-1997 |
声学.建筑物中和建筑物构件的隔音参数.第1部分:气载音响隔音 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996); German version EN ISO 717-1:1996 |
DIN EN ISO 717-2-1997 |
声学.建筑物中和建筑物构件的隔音评定.第2部分:冲击声的隔绝 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996); German version EN ISO 717-2:1996 |
DIN EN ISO 7200-2004 |
技术产品文献.标题栏和文献标题的数据字段 |
|
DIN EN ISO 7208-2000 |
脱脂乳、乳清和乳酪.脂肪含量的测定.重量分析法(参照法) |
Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) (ISO 7208:1999); German version EN ISO 7208:1999 |
DIN EN ISO 7214-2000 |
泡沫塑料.聚乙烯.试验方法 |
Cellular plastics - Polyethylene - Methods of test (ISO 7214:1998); German version EN ISO 7214:2000 |
DIN EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定压降下的气流值估计法 |
Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984); German version EN ISO 7231:1997 |
DIN EN ISO 7233-1995 |
橡胶和塑料软管及软管组件.吸引阻力测定 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
DIN EN ISO 7235-1995 |
声学.消音输送道测量步骤.插入损耗、流动噪声和压力损失 |
Acoutics - Measurement procedures for ducted silencers - Insertion loss, flow noise and total pressure loss (ISO 7235:1991); German version EN ISO 7235:1995 |
DIN EN ISO 7235-2004 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003) |
DIN EN ISO 7235-2004 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
|
DIN EN ISO 7250-1997 |
工艺设计相关的基本人体测量 |
Basic human body measurements for technological design (ISO 7250:1996); German version EN ISO 7250:1997 |
DIN EN ISO 7253-2002 |
涂料和清漆.耐中性盐雾的测定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) (ISO 7253:1996); German version EN ISO 7253:2001 |
DIN EN ISO 7263-1995 |
瓦楞纸.试验起瓦楞后平面耐压的测定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994); German version EN ISO 7263:1995 |
DIN EN ISO 7278-1-1996 |
液态烃.动态测量.容积式流量计试验系统.第1部分:一般原理 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995 |
DIN EN ISO 7278-2-1997 |
液态烃.动态测量.容量计用验证系统.第2部分:管式校准仪 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995 |
DIN EN ISO 7284-1996 |
电阻焊设备.汽车工业用多点点焊的两个单独副线圈的变压器详细规范 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996 |
DIN EN ISO 7287-2003 |
热切割设备用图形符号 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
DIN EN ISO 7291-2001 |
气体焊接设备.焊接,切割和同类过程中多方面系统的压力调节 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); German version EN ISO 7291:2001 |
DIN EN ISO 7327-1997 |
塑料.环氧树脂用固化剂和催化剂.酸酐中游离酸测定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997 |
DIN EN ISO 7328-2000 |
奶制食用冰和冰混合物配料.脂肪含量的测定.重量分析法 |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999); German version EN ISO 7328:1999 |
DIN EN ISO 734-1-2001 |
油料种子残留物.油含量的测定.第1部分:已烷(或轻油)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998); German version EN ISO 734-1:2000 |
DIN EN ISO 734-2-2001 |
油料种子残留物.油含量的测定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998); German version EN ISO 734-2:2000 |
DIN EN ISO 7345-1996 |
热绝缘.物理量与定义 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995 |
DIN EN ISO 7346-1-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))第1部分:静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method (ISO 7346-1:1996); German version EN ISO 7346-1:1997 |
DIN EN ISO 7346-2-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.第2部分:半静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996); German version EN ISO 7346-2:1997 |
DIN EN ISO 7346-3-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科)急性致死物质毒性的测定.第3部分:径流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996); German version EN ISO 7346-3:1997 |
DIN EN ISO 7371-1996 |
家用冷冻设备.有低温隔层和无低温隔层的冰箱.特性和试验方法 |
Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods (ISO 7371:1995); German version EN ISO 7371:1995 |
DIN EN ISO 7376-2004 |
麻醉和呼吸设备.气管插管用喉镜 |
|
DIN EN ISO 7380-1998 |
内六角平头螺钉 |
Heaxagon socket button head screws (ISO 7380:1997); German version EN ISO 7380:1997 |
DIN EN ISO 7380-2004 |
内六角平圆头螺钉 |
|
DIN EN ISO 7384-1995 |
人造大气环境的腐蚀试验.一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986); German version EN ISO 7384:1995 |
DIN EN ISO 7389-2004 |
房屋建筑.连接件.密封件的回弹性测定 |
|
DIN EN ISO 7390-2004 |
房屋建筑.连接件.密封件的耐流动性测定 |
|
DIN EN ISO 7391-1-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体系和基础规范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996); German version EN ISO 7391-1:1999 |
DIN EN ISO 7391-2-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第2部分:试样制备和特性测定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999 |
DIN EN ISO 7393-1-2000 |
水质.游离氯和氯的总含量测定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
DIN EN ISO 7393-2-2000 |
水质.游离氯和氯的总含量测定.第2部分:为常规控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
DIN EN ISO 7393-3-2000 |
水质.游离氯和氯的总含量测定.第3部分:测定氯总含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
DIN EN ISO 7405-1998 |
牙科学.牙科医疗设备生物分解性的疾病前评定.牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
DIN EN ISO 7438-2000 |
金属材料.弯曲试验 |
Metallic materials - Bend test (ISO 7438:1985); German version EN ISO 7438:2000 |
DIN EN ISO 7438-2005 |
金属材料.弯曲试验 |
|
DIN EN ISO 7439-2002 |
含铜的宫内节育避孕器具.要求、试验 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2002 |
DIN EN ISO 7441-1995 |
金属和合金的腐蚀.双金属在露天暴露腐蚀试验中腐蚀的测定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984); German version EN ISO 7441:1995 |
DIN EN ISO 7458-2004 |
玻璃容器.耐内部压力性.试验方法 |
|
DIN EN ISO 7459-2004 |
玻璃容器.耐热冲击性和热冲击耐久性.试验方法 |
|
DIN EN ISO 748-2000 |
明渠液流的测量.速度-面积方法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); German version EN ISO 748:2000 |
DIN EN ISO 7488-1995 |
牙科用混汞器 |
Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
DIN EN ISO 7490-2001 |
牙科用石膏粘接铸造熔模 |
Dental gypsum-bonded casting investments (ISO 7490:2000); German version EN ISO 7490:2000 |
DIN EN ISO 7491-2001 |
牙科材料.彩色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
DIN EN ISO 7492-1998 |
牙科用探针 |
Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
DIN EN ISO 7493-2000 |
牙科医生凳 |
Dental operator`s stool (ISO 7493:1997 + Technical Corrigendum 1:1999); German version EN ISO 7493:2000 |
DIN EN ISO 7494-1-2005 |
牙科学.牙科装置.第1部分:一般要求和试验方法 |
|
DIN EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996); German version EN ISO 7494:1997 |
DIN EN ISO 75-1-1996 |
塑料.测定耐热成型温度.第1部分:一般测试方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993); German version EN ISO 75-1:1996 |
DIN EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
DIN EN ISO 75-2-1996 |
塑料.测定耐热成型温度.第2部分:塑料和硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996 |
DIN EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
DIN EN ISO 75-3-1996 |
塑料.测定耐热成型温度.第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996 |
DIN EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
DIN EN ISO 7500-1 Bb.1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.拉伸、压缩及弯曲试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio |
DIN EN ISO 7500-1 Bb.2-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.弹簧试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach |
DIN EN ISO 7500-1 Bb.3-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.疲劳试验机的要求、验收和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac |
DIN EN ISO 7500-1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO 7500-1:1999); German version EN ISO 7500-1:1999 |
DIN EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
DIN EN ISO 7500-2-1999 |
金属材料.静态单轴应力试验机的校验.第2部分:拉伸应力的蠕变试验机.试验力的校验 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines; verification of the applied load (ISO 7500-2:1996); German version EN ISO 7500-2:1999 |