标准号 |
中文名称 |
英文名称 |
| BS EN 13087-4-2000 |
防护帽.试验方法.保持系统效果 |
(Protective helmets - Test methods - Retention system effectiveness) |
| BS EN 13087-5-2000 |
防护帽.试验方法.保持系统的强度 |
(Protective helmets - Test methods - Retention system strength) |
| BS EN 13087-6-2000 |
防护头盔.试验方法.视野 |
(Protective helmets - Test methods - Field of vision) |
| BS EN 13087-7-2000 |
防护头盔.试验方法.耐火性 |
(Protective helmets - Test methods - Flame resistance) |
| BS EN 13087-8-2000 |
防护帽.试验方法.电气特性 |
(Protective helmets - Test methods - Electrical properties) |
| BS EN 13088-2001 |
羽毛和羽绒填充产品.填充产品总重量和填充重量的测定方法 |
(Manufactured articles filled with feather and down - Method for the determination of a filled product’s total mass and of the mass of the filling) |
| BS EN 13089-1999 |
登山设备.攀冰工具.安全要求和试验方法 |
(Mountaineering equipment - Ice tools - Safety requirements and test methods) |
| BS EN 1309-1-1997 |
圆木和锯木.尺寸测量方法.第1部分:锯木 |
(Round and sawn timber - Method of measurement of dimensions - Sawn timber) |
| BS EN 13090-2000 |
建筑物内气体管道螺纹接头的重新密封的方法 |
(Means for resealing threaded joints of gas pipework in buildings) |
| BS EN 130900-1998 |
电子器件质量评定协调体系.分规范:固定聚苯乙烯膜介电金属箔直流电容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors) |
| BS EN 130901-1998 |
电子器件质量评定协调体系.空白详细规范:固定聚苯乙烯膜介电金属箔直流电容器.评估E级 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E) |
| BS EN 130902-1998 |
电子器件质量评定协调体系.空白详细规范:固定聚苯乙烯膜介电金属箔直流电容器.评估EZ级 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level EZ) |
| BS EN 13091-2000 |
生物技术.过滤器件和过滤组件的性能标准 |
(Biotechnology - Performance criteria for filter elements and filtration assemblies) |
| BS EN 13092-2000 |
生物技术.采样和接种方法指南 |
(Biotechnology - Guidance on sampling and inoculation procedures) |
| BS EN 13094-2004 |
危险物品运输用槽罐.工作压力不超过0.5bar的金属槽罐.设计和建造 |
|
| BS EN 13095-2000 |
生物技术.废气系统的性能标准 |
(Biotechnology - Performance criteria for off-gas systems) |
| BS EN 13096-2004 |
可运输储气瓶.填充气体到容器内的条件.单组分气体 |
|
| BS EN 13098-2001 |
工作场所空气.气载微生物和内毒素的测量导则 |
(Workplace atmospheres - Guidelines for measurement of airborne micro-organisms and endotoxin) |
| BS EN 13099-2004 |
可运输气瓶.气体混合物装填到容器中的条件 |
|
| BS EN 13099-2004 |
可运输气瓶.气体混合物装填到容器中的条件 |
|
| BS EN 131-1-1993 |
梯子.术语、类型和功能规格规范 |
(Ladders - Specification for terms, types, functional sizes) |
| BS EN 131-2-1993 |
梯子.要求、试验和标志规范 |
(Ladders - Specification for requirements, testing, marking) |
| BS EN 1310-1997 |
圆木和锯木.特性测定法 |
(Round and sawn timber - Method of measurement of features) |
| BS EN 13100-1-2000 |
热塑性半成品焊接接头的无损检验.外观检查 |
(Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination) |
| BS EN 13100-2-2004 |
热塑性半成品焊接接头的无损检验.X射线检验 |
|
| BS EN 13100-3-2004 |
热塑性半成品焊接接头的无损检验.超声检验 |
|
| BS EN 13101-2002 |
地下铁道人入口处阶梯.舒适度的要求、标志、试验和评定 |
(Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity) |
| BS EN 13103-2001 |
铁路设施.轮副和行车机构.非动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Non-powered axles - Design method) |
| BS EN 13104-2001 |
铁路设施.轮副和行车机构.动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Powered axles - Design method) |
| BS EN 13107-2004 |
载人用索道装置的安全要求.民用工程设施 |
|
| BS EN 13109-2002 |
液化石油气罐.处置 |
(LPG tanks - Disposal) |
| BS EN 1311-1997 |
圆木和锯木.病虫害侵袭测定法 |
(Round and sawn timber - Method of measurement of biological degrade) |
| BS EN 13110-2002 |
液化石油气用可运输、可再装的焊接铝储气瓶.设计和制造 |
(Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction) |
| BS EN 13111-2001 |
防水柔软片.非连续屋顶和墙壁下铺设.耐防水性的测定 |
(Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration) |
| BS EN 13112-2002 |
制革机.剥离和带式刀剖皮剪切机的安全要求 |
(Tannery machines - Splitting and bandknife shearing machines - Safety requirements) |
| BS EN 13113-2002 |
制革机.滚动涂层机的安全要求 |
(Tannery machines - Roller coating machines - Safety requirements) |
| BS EN 13114-2002 |
制革机.旋转加工容器的安全要求 |
(Tannery machines - Rotating process vessels - Safety requirements) |
| BS EN 13115-2001 |
窗.机械特性的分类.撑动,扭矩和操作力 |
(Windows - Classification of mechanical properties - Racking, torsion and operating forces) |
| BS EN 13116-2001 |
幕墙.对风的抗性.性能要求 |
(Curtain walling - Resistance to wind load - Performance requirements) |
| BS EN 13117-1-2000 |
运输包装.可重复使用的刚性塑料配送箱.通用配送箱 |
(Transport packaging - Reusable, rigid plastics distribution boxes - General purpose application) |
| BS EN 13117-2-2000 |
运输包装.可重复使用的刚性塑料配送箱.试验的一般规范 |
(Transport packaging - Reusable, rigid plastics distribution boxes - General specifications for testing) |
| BS EN 13118-2000 |
农用机械.马铃薯收割设备.安全性 |
(Agricultural machinery - Potato harvesting equipment - Safety) |
| BS EN 1312-1997 |
圆木材和板木材.板木材的批量体积测定 |
(Round and sawn timber - Determination of the batch volume of sawn timber) |
| BS EN 13120-2004 |
内部百叶帘.包括安全在内的性能要求 |
|
| BS EN 131200-2002 |
电子器件质量评定协调系统.分规范.具有金属化电极和聚丙烯介质的固定式电容器 |
(Harmonized system of quality assessment for electronic components - Sectional Specification - Fixed capacitors with metallized electrodes and polypropylene dielectric) |
| BS EN 131201-2002 |
空白详细规范.具有金属化电极和聚丙烯介质的固定式电容器 |
(Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric) |
| BS EN 13121-1-2003 |
地面用GRP槽罐和容器.原材料.技术条件和验收条件 |
(GRP tanks and vessels for use above ground - Raw materials - Specification conditions and acceptance conditions) |
| BS EN 13121-2-2003 |
地面用GRP储罐和容器.复合材料.抗化学性 |
(GRP tanks and vessels for use above ground - Composite materials - Chemical resistance) |
| BS EN 13123-1-2001 |
门窗和遮板.耐爆炸性.要求和分类.冲击管 |
(Windows, doors and shutters - Explosion resistance - Requirements and classification - Shock tube) |
| BS EN 13123-2-2004 |
门窗和遮板.防爆.要求和分类.靶场试验 |
|
| BS EN 13124-1-2001 |
门窗和遮板.耐爆炸性.试验方法.冲击管 |
(Windows, doors and shutters - Explosion resistance - Test method - Shock tube) |
| BS EN 13124-2-2004 |
门窗和遮板.防爆.试验方法.靶场试验 |
|
| BS EN 13125-2001 |
遮板和遮帘.补充的耐热性.产品透气率等级的规定 |
(Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product) |
| BS EN 13128-2001 |
机床的安全.铣床(包括镗床) |
(Safety of machine tools - Milling machines (including boring machines)) |
| BS EN 13129-1-2002 |
铁路设施.主干线铁路车辆用空调的舒适度参数 |
(Railway applications - Air conditioning for main line rolling stock - Comfort parameters) |
| BS EN 13129-2-2004 |
铁路设施.主干线铁路车辆用空调.典型试验 |
|
| BS EN 1313-1-1997 |
圆形木材和锯材.允许偏差和优选尺寸.软木锯材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Softwood sawn timber) |
| BS EN 1313-2-1999 |
圆形木材和锯材.允许偏差和优选尺寸.硬木锯材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Hardwood sawn timber) |
| BS EN 13130-1-2004 |
接触食品的材料和物品.有限制的塑料物质.物质从塑料向食品和食品模拟物中迁移的试验方法和塑料中物质的测定以及食品模拟物所处条件选择的指南 |
|
| BS EN 13130-2-2004 |
接触食品的材料和物品.有限制的塑料物质.食品模拟物中对苯二酸的测定 |
|
| BS EN 13130-3-2004 |
接触食品的材料和物品.有限制的塑料物质.食品和食品模拟物中丙烯腈的测定 |
|
| BS EN 13130-4-2004 |
接触食品的材料和物品.有限制的塑料物质.塑料中1,3-丁二烯的测定 |
|
| BS EN 13130-5-2004 |
接触食品的材料和物品.有限制的塑料物质.食品模拟物中的偏二氯乙烯的测定 |
|
| BS EN 13130-6-2004 |
与食品有关的材料和物品.有限制的塑料物质.塑料中偏二氯乙烯的测定 |
|
| BS EN 13130-7-2004 |
与食品有关的材料和物品.有限制的塑料物质.食品模拟物中的单乙二醇和二甘醇的测定 |
|
| BS EN 13130-8-2004 |
接触食品的材料和物品.有限制的塑料物质.塑料中异氰酸酯的测定 |
|
| BS EN 13131-2000 |
石油及其产品的试验方法.液体石油产品.镍和钒含量的测定.原子吸收分光光度测定法 |
(Methods of test for petroleum and its products - Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method) |
| BS EN 13132-2000 |
石油及其产品的试验方法.液化石油产品.无铅汽油.使用柱转换气相色谱法测定有机氧饱和化合物的含量和有机束 |
(Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatogr) |
| BS EN 13133-2000 |
铜焊.人员资格鉴定 |
(Brazing - Brazer approval) |
| BS EN 13134-2000 |
铜焊.程序认可 |
(Brazing - Procedure approval) |
| BS EN 13135-1-2004 |
起重机.安全.设计.设备要求.电工设备 |
|
| BS EN 13135-2-2004 |
起重机.安全.设计.设备要求.非电工技术设备 |
|
| BS EN 13136-2001 |
灭火系统和热泵.压力释放装置和相应的管道.计算方法 |
(Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation) |
| BS EN 13137-2001 |
废弃物的特征记述.废弃物、淤泥和沉积物中有机碳总量(TOC)的测定 |
(Characterisation of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments) |
| BS EN 13138-1-2004 |
游泳教学用浮力辅助设备.可穿戴的浮力辅助设备的安全要求和试验方法 |
|
| BS EN 13138-2-2004 |
游泳教学用浮力辅助设备.可握住的浮力辅助设备的安全要求和试验方法 |
|
| BS EN 13138-3-2004 |
教授游泳用浮力辅助设备.可穿戴的游泳椅的安全要求和试验方法 |
|
| BS EN 13138-3-2004 |
教授游泳用浮力辅助设备.可穿戴的游泳椅的安全要求和试验方法 |
|
| BS EN 13139-2002 |
灰浆用集料 |
(Aggregates for mortar) |
| BS EN 13140-2000 |
农用机械.制糖甜菜和饲料甜菜收割设备.安全性 |
(Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety) |
| BS EN 13141-1-2004 |
建筑物通风.住宅通风用部件/产品的性能检验.外部和内部上升空气传送设备 |
|
| BS EN 13141-2-2004 |
建筑物通风.住宅通风用部件/产品的性能检验.排气和供气终端设备 |
|
| BS EN 13141-3-2004 |
建筑物通风.住宅通风用部件/产品的性能检验.住宅用炉罩 |
|
| BS EN 13141-4-2004 |
建筑物通风.住宅通风用部件/产品的性能检验.住宅通风系统用风机 |
|
| BS EN 13141-5-2005 |
建筑物通风.住宅通风用部件/产品的性能检验.通风帽和屋顶出口终端装置 |
|
| BS EN 13141-6-2004 |
建筑物通风.住宅通风用部件/产品的性能检验.用于单一住户的排气通风设备组 |
|
| BS EN 13141-7-2005 |
建筑物的通风.住宅通风用部件/产品的性能试验.独户住宅机械通风系统用机械供气和排气通风装置(包括热回收)的性能检验 |
|
| BS EN 13142-2004 |
建筑物通风.住宅通风用部件/产品.必须的和可选的性能特征 |
|
| BS EN 13143-2003 |
金属和其他无机覆层.有关孔隙率的定义和协定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning porosity) |
| BS EN 13144-2003 |
金属和其他无机涂层.用抗拉试验定量测量粘着性的方法 |
(Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test) |
| BS EN 13145-2001 |
铁路应用.轨道.枕木和垫块 |
(Railway applications - Track - Wood sleepers and bearers) |
| BS EN 13146-1-2002 |
铁路设施.轨道.紧固系统的试验方法.纵向轨道约束力的测定 |
(Railway applications - Track - Test methods for fastening systems - Determination of longitudinal rail restraint) |
| BS EN 13146-2-2002 |
铁路设施.轨道.紧固系统的试验方法.扭转阻力的测定 |
(Railway applications - Track - Test methods for fastening systems - Determination of torsional resistance) |
| BS EN 13146-3-2002 |
铁路设施.轨道.紧固系统的试验方法.冲击负载衰减度的测定 |
(Railway applications - Track - Test methods for fastening systems - Determination of attenuation of impact loads) |
| BS EN 13146-4-2002 |
铁路设施.轨道.紧固系统的试验方法.重复负载的影响 |
(Railway applications - Track - Test methods for fastening systems - Effect of repeated loading) |
| BS EN 13146-5-2002 |
铁路设施.轨道.紧固系统的试验方法.电阻的测定 |
(Railway applications - Track - Test methods for fastening systems - Determination of electrical resistance) |
| BS EN 13146-6-2002 |
铁路设施.轨道.紧固系统的试验方法.艰苦环境条件的影响 |
(Railway applications - Track - Test methods for fastening systems - Effect of severe environmental conditions) |
| BS EN 13146-7-2002 |
铁路设施.轨道.紧固系统的试验方法.紧固力的测定 |
(Railway applications - Track - Test methods for fastening systems - Determination of clamping force) |
| BS EN 13146-8-2002 |
铁路设施.轨道.紧固系统的试验方法.服务中的试验 |
(Railway applications - Track - Test methods for fastening systems - In service testing) |
| BS EN 13147-2001 |
铜和铜合金.带材宽面上残余应力的测定 |
(Copper and copper alloys - Determination of residual stresses in the border area of a slit strip) |
| BS EN 13148-2002 |
铜及铜合金.热浸镀锡带 |
(Copper and copper alloys - Hot-dip tinned strip) |
| BS EN 13149-1-2004 |
公共交通.道路车辆调度和控制系统.车载数据传输的WORLDFIP定义和应用规则 |
|
| BS EN 13149-1-2004 |
公共交通.道路车辆调度和控制系统.车载数据传输的WORLDFIP定义和应用规则 |
|
| BS EN 13149-4-2004 |
公共运输.道路车辆调度和控制系统.CANopen运输车的一般应用规则 |
|
| BS EN 13149-4-2004 |
公共运输.道路车辆调度和控制系统.CANopen运输车的一般应用规则 |
|
| BS EN 13149-5-2004 |
公共运输.道路车辆调度和控制系统.CANopen电缆敷设规范 |
|
| BS EN 13149-5-2004 |
公共运输.道路车辆调度和控制系统.CANopen电缆敷设规范 |
|
| BS EN 1315-1-1997 |
尺寸分类.软木原木 |
(Dimensional classification - Hardwood round timber) |
| BS EN 1315-2-1997 |
尺寸分类.软木原木 |
(Dimensional classification - Softwood round timber) |
| BS EN 13150-2001 |
试验室工作凳.尺寸.安全要求和试验方法 |
(Workbenches for laboratories - Dimensions, safety requirements and test methods) |
| BS EN 13152-2002 |
液化石油气瓶阀门的规范和测试.总闭锁 |
(Specification and testing of LPG cylinder valves - Self closing) |
| BS EN 13153-2002 |
液化石油气瓶阀门的规范和测试.手工操作 |
(Specification and testing of LPG cylinder valves - Manually operated) |
| BS EN 13155-2003 |
起重机.安全.非固定式荷载提升附属装置 |
(Cranes - Safety - Non-fixed load lifting attachments) |
| BS EN 13158-2000 |
防护服.骑马者身体和肩的保护物和防护夹克.要求和试验方法 |
(Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods) |
| BS EN 1316-1-1997 |
软木原木.质量分级.水青岗木和橡木 |
(Hardwood round timber - Qualitative classification - Oak and beech) |
| BS EN 1316-2-1997 |
软木原木.质量分级.白杨木 |
(Hardwood round timber - Qualitative classification - Poplar) |
| BS EN 1316-3-1998 |
硬木圆形木材.质量等级.槐木,槭木和悬铃木 |
(Hardwood round timber - Qualitative classification - Ash and maples and sycamore) |
| BS EN 13160-1-2003 |
检漏系统.一般原理 |
(Leak detection systems - General principles) |
| BS EN 13160-2-2003 |
检漏系统.压力和真空系统 |
(Leak detection systems - Pressure and vacuum systems) |
| BS EN 13160-3-2003 |
检漏系统.水箱的液体系统 |
(Leak detection systems - Liquid systems for tanks) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com