标准号 |
中文名称 |
英文名称 |
EN 61010-2-045-2000 |
测量、控制和实验室用电气设备的安全要求第2-045部分:医疗、制药、兽医和试验室用洗涤器消毒的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (IEC 61010-2-045:2000) |
EN 61010-2-051-1995 |
测量、控制和实验室用电气设备的安全要求第2-51部分:机械搅拌用实验室设备的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring (IEC 61010-2-051:1995) |
EN 61010-2-061-1996 |
测量、控制和实验室用电气设备的安全要求第2-61部分:具有热原子化和离子化的试验室用原子能谱仪的特 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:1995) |
EN 61010-2-081-2002 |
测量、控制和实验室用电气设备的安全要求第2-81部分:分析和其他用途的自动及半自动试验室设备的特殊 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) / Note: Endorsemen |
EN 61010-2-081/prA1-2003 |
测量、控制和实验室用电气设备的安全要求第2-81部分:分析和其他用途的自动及半自动试验室设备的特殊 |
IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
EN 61010-2-101-2002 |
测量、控制和实验室用电气设备的安全要求第2-101部分:生物体外诊断(IVD)医疗设备的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified) |
EN 61011-1-1992 |
与供电干线连接的电池供电的电牧栏增能器的安全要求 |
Electric fence energizers; safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains (IEC 61011-1:1989, modified) |
EN 61011-1992 |
电牧栏增能器电网供电的电牧栏增能器的安全要求 |
Electric fence energizers; safety requirements for mains-operated electric fence energizers (IEC 61011:1989, modified) |
EN 61011-2-1992 |
不与供电干线连接的电池供电的电牧栏增能器的安全要求 |
Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains (IEC 61011-2:1990, modified) |
EN 61012-1998 |
伴有超声情况下可听声测量用滤波器 |
Filters for the measurement of audible sound in the presence of ultrasound (IEC 61012:1990) |
EN 61014-2003 |
可靠性增长大纲 |
Programmes for reliability growth (IEC 61014:2003) / Note: Endorsement notice |
EN 61016-2001 |
使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统 |
Helical-scan digital component video cassette recording system using 19 mm magnetic tape, (format D-1) (IEC 61016:1998 + A1:1999) |
EN 61019-2-1997 |
表面声波(saw)谐振器第2部分:使用指南 |
Surface acoustic wave (SAW) resonators - Part 2: Guide to the use (IEC 61019-2:1995) |
EN 61021-1-1997 |
电信和电气设备用的变压器和电感器的叠片铁心包第1部分:尺寸 |
Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990) |
EN 61021-2-1997 |
电信和电气设备用的变压器和电感器的叠片铁心包第2部分:用YEE 2 叠片铁芯的电性能 |
Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995) |
EN 61023-1999 |
测量航船速度和距离的设备(SDME)性能要求试验方法 和要求的试验结果 |
Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results (IEC 61023:1999) |
EN 61027-1993 |
声学阻抗/导纳测量用仪器 |
Instruments for the measurement of aural acoustic impedance/admittance (IEC 61027:1991) |
EN 61029-2-1-2002 |
移动式电动工具的安全第2-1部分:圆锯的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified) |
EN 61029-2-5-2002 |
移动式电动工具的安全第2-5部分:带状锯的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified) |
EN 61029-2-9-2002 |
移动式电动工具的安全第2-9部分:斜切锯的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified) |
EN 61030-1993 |
音频、视频和视听系统用家用数字总线(D2B) |
Audio, video and audiovisual systems; domestic digital bus (D2B) (IEC 61030:1991 + A1:1993) |
EN 61032-1998 |
用外壳对人体和设备的防护林检验用探头 |
Protection of persons and equipment by enclosures - Probes for verification (IEC 61032:1997) |
EN 61040-1992 |
激光辐射功率和能量测量探测器、仪表和设备 |
Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990) |
EN 61041-1-1995 |
非播放用录像机测量方法第1部分:通用视频(NTSC/PAL)和声频(纵向)特性 |
Non-broadcast video tape recorders - Methods of measurement - Part 1: General video (NTSC/PAL) and audio (longitudinal) characteristics (IEC 61041-1:1990) |
EN 61041-2-1996 |
非广播用磁录像机测量方法第2部分:SECAM录像机色度特性 |
Non-broadcast video tape recorders - Methods of measurement - Part 2: Video characteristics chrominance SECAM (IEC 61041-2:1994) |
EN 61041-3-1995 |
非广播用录像机测量方法第3部分:用FM信号录音声频特性 |
Non-broadcast videotape recorders - Methods of measurement - Part 3: Audio characteristics for FM recording (IEC 61041-3:1993) |
EN 61041-4-1997 |
非广播用录像机测量方法第4部分:校准带(NTSC/PAL/SECAM) |
Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape (NTSC/PAL/SECAM) (IEC 61041-4:1997) |
EN 61041-5-1997 |
非广播用录像机测量方法第5部分:高频磁带录像机其中包括那些配有Y/C图像连接器(NTSC/PA |
Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL) (IEC 61041-5:1997) |
EN 61043-1994 |
电声学声强测量仪压强传声器配对的测量 |
Electroacoustics; Instruments for the measurement of sound intensity; Measurement with pairs of pressure sensing microphones (IEC 61043:1993) |
EN 61044-1992 |
牵引用铝酸蓄电池组的利用机会充电 |
Opportunity-charging of lead-acid traction batteries (IEC 61044:1990) |
EN 61047-2004 |
钨丝灯用直流或交流供电电子降压转换器.性能要求 |
|
EN 61049-1993 |
管形荧光灯和其它放电灯电路用电容器的性能要求规范 |
Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements (IEC 61049:1991 + corrigendum 1992, modified) |
EN 61056-1-2003 |
一般用铅酸蓄电池(阀调节型)第1部分:一般要求、功能特性试验方法 |
General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics, methods of test (IEC 61056-1:2002) / Note: Endorsement notice |
EN 61056-2-2003 |
一般用铅酸蓄电池(阀调节型)第2部分:尺寸、端子和标记 |
General purpose lead-acid batteries (valve regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002) / Note: Endorsement notice |
EN 61057-1993 |
带电作业用带绝缘臂的高架装置 |
Aerial devices with insulating boom used for live working exceeding 1 kV a.c. (IEC 61057:1991, modified) |
EN 61058-1-2002 |
电器开关第1部分:通用要求 |
Switches for appliances - Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified) / Note: Endorsement notice |
EN 61061-1-1998 |
电工用非浸渍致密层合木板第1部分:定义、名称及一般要求 |
Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements (IEC 61061-1:1998) |
EN 61061-3-1-1998 |
电工用非浸渍致密层合木板第3部分:单项材料规范活页1:由山毛榉薄片制成的片材制品 |
Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheets 1: Sheets produced from beech veneer (IEC 61061-3-1:1998) |
EN 61061-3-2-2001 |
电工用非浸渍致密层合木板第3部分:单项材料规范活页2:由山毛榉薄片制成的环型材制品 |
Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Rings produced from beech veneer (IEC 61061-3-2:2001) |
EN 61063-1996 |
声学汽轮机和被驱动机械发出的空气传播噪音的测量 |
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery (IEC 61063:1991) |
EN 61064-1993 |
汽轮机速度控制系统验收试验 |
Acceptance tests for steam turbine speed control systems (IEC 61064:1991) |
EN 61065-1993 |
老化后矿物绝缘油低温流动特性的评定方法 |
Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991) |
EN 61067-1-1997 |
玻璃和玻璃聚酯纤维编织带规范第1部分:定义、分类和一般要求 |
Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991) |
EN 61067-2-1997 |
玻璃和玻璃聚酯纤维编织带成第2部分:试验方法 |
Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992) |
EN 61067-3-1-1995 |
玻璃和玻璃聚酯纤维编织带第3部分:单项材料规范活页1:1,2,3 型织带 |
Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995) |
EN 61068-1-1997 |
聚酯纤维机织带第1部分:定义、名称和一般要求 |
Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991) |
EN 61068-2-1997 |
聚酯纤维编织带规范第2部分:试验方法 |
Specification for polyester fibre woven tapes - Part 2: Methods of test (IEC 61068-2:1991) |
EN 61068-3-1-1995 |
聚酯纤维编织带第3部分:单项材料规范活页1:常规织机或无梭织机编织带 |
Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 61068-3-1:1995) |
EN 61069-1-1993 |
工业过程测量和控制系统评估用系统特性的评定第1部分:一般考虑和方法学 |
Industrial-process measurement and control- Evaluation of system properties for the purpose of system assessment; Part 1: General considerations and methodology (IEC 61069-1:1991) |
EN 61069-2-1994 |
工业过程测量和控制系统评估用系统特性的评定第2部分:评估方法学 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology (IEC 61069-2:1993) |
EN 61069-3-1996 |
工业过程测量和控制系统评估用系统特性的评定第3部分:系统功能性的评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:1996) |
EN 61069-4-1997 |
工业过程测量和控制系统评估用系统特性的评定第4部分:系统性能评估 |
Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (IEC 61069-4:1997) |
EN 61069-5-1995 |
工业过程测量和控制系统评估用系统特性的评定第5部分:系统可靠性评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability (IEC 61069-5:1994) |
EN 61069-6-1998 |
工业过程测量和控制系统评估用系统特性的评定第6部分:系统可操作性能评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability (IEC 61069-6:1998) |
EN 61069-7-1999 |
工业过程测量和控制系统评估用系统特性的评定第7部分:系统安全评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety (IEC 61069-7:1999) |
EN 61069-8-1999 |
工业过程测量和控制系统评估用系统特性的评定第8部分:非任务相关系统性能的评估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999) |
EN 61071-1-1996 |
电力电子电容器第1部分:总则 |
Power electronic capacitors - Part 1: General (IEC 61071-1:1991, modified) |
EN 61071-2-1996 |
电力电子电容器第2部分:熔丝隔离试验、破坏试验、自愈试验和耐久性试验的要求 |
Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test (IEC 61071-2:1994) |
EN 61073-1-2000 |
光纤光缆机械式接头和熔接式接头保护盒第1部分:通用规范 |
Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification (IEC 61073-1:1999) |
EN 61074-1993 |
用差示扫描量热法测定电气绝缘材料熔融及结晶的热量和温度 |
Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991) |
EN 61075-1993 |
船用罗兰C接收机最低性能标准试验方法和要求的测试结果 |
Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results (IEC 61075:1991) |
EN 61076-1-1995 |
经质量评定的、用于直流低频模拟和数字式高速数据设备连接器第1部分:通用规范 |
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification (IEC 61076-1:1995) |
EN 61076-2-001-2001 |
电子设备用连接器第2-001部分:圆形连接器空白详细规范 |
Connectors for electronic equipment - Part 2-001: Circular connectors; Blank detail specification (IEC 61076-2-001:2001) |
EN 61076-2-102-2002 |
电子设备用连接器第2-102部分:经质量评定的圆形连接器外部低压电源用插头插座的详细规范 |
Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply (IEC 61076-2-102:2002) / Note: Endorsement notice |
EN 61076-2-103-2004 |
电子设备连接器.第2-103部分:圆形连接器.一系列多极连接器的详细规范(XLR型) |
|
EN 61076-2-1999 |
直流低频模拟及数字高速数据应用系统用连接器第2 部分:有质量评定的圆形连接器分规范 |
Connectors for use in d.c. low-frequency analogue and digital high-speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification (IEC 61076-2:1998) |
EN 61076-3-001-2000 |
直流低频模拟及数字高速数据应用系统用连接器第3-001部分:有质量评估的矩形连接器空白详细规范 |
Connectors for use in d.c., low-frequency analogue, and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification (IEC 61076-3-001:1999) |
EN 61076-3-100-2000 |
直流低频模拟及数字高速数据应用系统用连接器第3-100部分:有质量评估的矩形连接器带有1.27mm双排不可 |
Connectors for use in d.c., low- frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remova |
EN 61076-3-101-1997 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第3部分:矩形连接器第101节:在1.27mm X 1.5 |
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells an |
EN 61076-3-103-2004 |
电子设备连接器.第3-103部分:矩形连接器.用于高速串联数据的带1.25mm间距不可拆卸带状电缆触点的单排连接器的详细规范 |
|
EN 61076-3-104-2003 |
电子设备用连接器第3-104部分:矩形连接器数据传输频率在600 MHz以内的8向非屏蔽固定式连接器的详细规 |
Connectors for electronic equipment - Part 3-104: Rectangular connectors; Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum (IEC 61076-3-104:2003) / Note: Endorsement notice |
EN 61076-3-2000 |
直流低频模拟及数字高速数据应用系统用连接器第3部分:有质量评估的矩形连接器分规范 |
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification (IEC 61076-3:1999) |
EN 61076-4-001-1996 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:印制板连接器第001节:空白详细规范 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification (IEC 61076-4-001:1996) |
EN 61076-4-100-2001 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:印制板连接器第100节:印制电路板和 |
Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001) |
EN 61076-4-101-2001 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:印制板连接器第101节:符合IEC 6091 |
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076- |
EN 61076-4-102-1997 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:印制板连接器第102节:符合IEC 6091 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in |
EN 61076-4-103-1999 |
直流低频模拟及数字高速数据应用系统用连接器第4-103部分:有质量评估的印制板连接器具有屏蔽罩和基本 |
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-1 |
EN 61076-4-104-1999 |
直流低频模拟及数字高速数据应用系统用连接器第4-104部分:有质量评估的印制板连接器基本网格为2.0mm、 |
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed boards connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a m |
EN 61076-4-105-1998 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:印制板连接器第105节:供包括通信和 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide |
EN 61076-4-107-2001 |
电子设备用连接器第4-107部分:有质量评定的印制板连接器印制电路板用基本网格为2.0 mm、固定部分带有 |
Connectors for electronic equipment-part 4-107:Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2, 0 mm, fixed part with solder and press-in terminations for printed boards |
EN 61076-4-108-2002 |
电子设备用连接器第4-108部分:有质量评定的印制板连接器符合IEC 60917-1标准的组件螺距为25 mm并具有 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densi |
EN 61076-4-110-2002 |
电子设备用连接器第4-110部分:有质量评定的印制板连接器包括完全屏蔽和闭锁功能的基本网格为2.0mm闭锁 |
Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001) |
EN 61076-4-111-2002 |
电子设备用连接器第4-111部分:有质量评定的印制板连接器印制电路板和底板具有预插合特性并且符合IEC 6 |
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm |
EN 61076-4-113-2003 |
电子设备用连接器印制电路板连接器第4-113部分:印制电路板和母线底板用带有5列2.54mm网格的两件式连接 |
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002) / Note: Endorsement |
EN 61076-4-114-2003 |
电子设备用连接器第4-114部分:印制电路板连接器带有完全屏蔽功能的网格为1 mm x 1.5 mm的两件式连接器 |
Connectors for electronic equipment - Part 4-114: Printed board connectors; Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm (IEC 61076-4-114:2003) / Note: Endorsement notice |
EN 61076-4-115-2003 |
电子设备用连接器第4-115部分:印制电路板连接器无限波段设备用底板连接器 |
Connectors for electronic equipment - Part 4-115: Printed board connectors; Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003) / Note: Endorsement notice |
EN 61076-4-1996 |
有质量评估的直流低频模拟及数字高速数据应用系统用连接器第4部分:分规范印制板连接器 |
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors (IEC 61076-4:1995) |
EN 61076-5-2001 |
直流低频模拟及数字高速数据应用系统用连接器第5部分:有质量评定的联机插座分规范 |
Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001) |
EN 61076-6-2004 |
电子设备连接器.第6部分:松散部件触点.分规范 |
|
EN 61076-7-001-2004 |
电子设备连接器.第7-001部分:电缆引出端附件.空白详细规范(IEC 61076-7-001-2004) |
|
EN 61076-7-2000 |
直流低频模拟及数字高速数据应用系统用连接器第7部分:有质量评定的包括鉴定和能力批准的电缆引出端附件 |
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000) |
EN 61077-1991 |
使用VHS型12.65mm(0.5in)磁带的螺旋扫描盒式磁带录像系统袖珍VHS盒式录像带 |
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS-Compact VHS video cassette (IEC 61077:1991) |
EN 61078-1993 |
可靠性分析技术可靠性方框图法 |
Analysis techniques for dependability - reliability block diagram method (IEC 61078:1991) |
EN 61079-1-1993 |
12GHz频带卫星广播传输接收机的测量方法第1部分:露天设备的射频测量 |
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band-Part 1: Radio-frequency measurements on outdoor units (IEC 61079-1:1992) |
EN 61079-2-1993 |
12GHz频带卫星广播传输接收机的测量方法第2部分:DBS调谐设备的电气测量 |
Methods of measurement on receivers for satellite broadcast transmission in the 12 GHz band-Part 2: Electrical measurements on DBS tuner units (IEC 61079-2:1992) |
EN 61079-3-1993 |
12GHz频带卫星广播传输接收机的测量方法第3部分:包括户外装置和DBS调谐装置的接收系统总性能的电气测量 |
Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band-Part 3: Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit (IEC 61079-3:1993) |
EN 61079-5-1993 |
12GHz频带卫星广播传输接收机的测量方法第5部分:MAC/包系统用解码器单的电气测量 |
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band-Part 5: Electrical measurements on decoder units for MAC/packet systems (IEC 61079-5:1993) |
EN 61082-2-1994 |
电工技术用文件的编制第2部分:功能图 |
Preparation of documents used in electrotechnology; Part 2: function-oriented diagrams (IEC 61082-2:1993) |
EN 61082-3-1994 |
电工技术用文件的编制第3部分:接线图、接线表和接线单 |
Preparation of documents used in electrotechnology; Part 3: connection diagrams, tables and lists (IEC 61082-3:1993) |
EN 61082-4-1996 |
电工技术用文件的编制第4部分:位置和安装文件 |
Preparation of documents used in electrotechnology - Part 4: Location and installation documents (IEC 61082-4:1996) |
EN 61083-1-2001 |
高压脉冲试验中测量用数字记录仪第1部分:数字记录仪的要求 |
Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001) |
EN 61083-2-1997 |
高压脉冲试验中测量用数字记录仪第2部分:测定冲击波形参数用软件的评估 |
Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms (IEC 61083-2:1996) |
EN 61086-1-1994 |
承载印制电路板用涂料(保护涂层)规范第1部分:定义、分类和一般要求 |
Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements (IEC 61086-1:1992) |
EN 61086-1-2004 |
承载印制电路板用涂料(敷形涂料).第1部分:定义、分类及一般要求 |
|
EN 61086-2-1994 |
承载印制电路板用涂料(保护涂层)规范第2部分:试验方法 |
Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992) |
EN 61086-2-2004 |
承载印制电路板用涂料(敷形涂料).第2部分:试验方法 |
|
EN 61086-3-1-1995 |
承载印制电路板用涂料(保护涂层)第3部分:单项材料规范活页1: 通用(I类)和高可靠性(II类)涂料 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) (IEC 61086-3-1:1995) |
EN 61086-3-1-2004 |
承载印制电路板用涂料(敷形涂料).第3-1部分:单项材料规范.通用(1类)、高可靠性(2类)和航空(3类)涂料 |
|
EN 61094-1-2000 |
测量传声器第1部分:实验室标准传声器规范 |
Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000) |
EN 61094-2-1993 |
测量传声器第2部分:用互易技术对实验室标准传声器进行压力校准的基本方法 |
Measurement microfones; Part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992) |
EN 61094-3-1995 |
测量传声器第3部分:用互易技术对实验室标准传声器进行自由场校准的基本方法 |
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-3:1995) |
EN 61094-4-1995 |
测量传声器第4部分:传声器工作标准的规范 |
Measurement microphones - Part 4: Specifications for working standard microphones (IEC 61094-4:1995) |
EN 61094-5-2001 |
测量传声器第5部分:用比较法对工作标准传声器进行压力校准的方法 |
Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001) |
EN 61097-1-1993 |
全球海上遇险和安全系统(GMDSS)第1部分:雷达应答器海上搜索和营救(SART )操作和性能要求、试验方法 |
Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder -Marine search and rescue (SART)-Perational and performance requirements, methods of testing and required test results (IEC 61097-1:1992) |
EN 61099-1992 |
电气用未使用过的合成有机酯规范 |
Specification for unused synthetic organic esters for electrical purposes (IEC 61099:1992) |
EN 611-1-1995 |
锡和锡合金 锡铅合金和锡铅合金器皿 第1部分:锡铅合金 |
Tin and tin alloys - Pewter and pewter ware - Part 1: Pewter |
EN 611-2-1996 |
锡和锡合金 锡铅合金和锡铅合金器皿 第2部分:锡铅合金器皿 |
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware |
EN 61100-1992 |
绝缘液体按照着火点和净热值的分类 |
Classification of insulating liquids according to fire point and net calorific value (IEC 61100:1992) |
EN 61101-1993 |
0.5MHz至15MHz频率范围内采用平面扫描技术对水听器的绝对校准 |
The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz (IEC 61101:1991) |
EN 61104-1992 |
压缩视盘系统12cm CD-V |
Compact disc video system; 12 cm CD-V (IEC 61104:1992) |