标准号 |
中文名称 |
英文名称 |
| BS EN 60738-1-1999 |
热敏电阻.直接热无源分级功能温度系数.一般规范 |
(Thermistors - Directly heated positive step-function temperature coefficient - Generic specification) |
| BS EN 60738-1-2-1999 |
热敏电阻.直接热无源分级功能温度系数.空白详细规范.热件应用用具.评定级EZ |
(Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Heating element application - Assessment level EZ) |
| BS EN 60738-1-3-1999 |
热敏电阻.直接热无源分级功能温度系数.空白详细规范.涌电流应用.评定级EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Inrush current application - Assessment level EZ |
| BS EN 60738-1-4-1999 |
热敏电阻.直接热无源分级功能温度系数.空白详细规范.感应应用.评定级EZ |
(Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Sensing application - Assessment level EZ) |
| BS EN 60743-2002 |
带电作业.工具和设备术语 |
(Live working - Terminology for tools, equipment and devices) |
| BS EN 60745-1-2003 |
手持式电动工具.安全性.一般要求 |
(Hand-held motor-operated electric tools - Safety - General requirements) |
| BS EN 60745-2-1-2003 |
手持式电动工具的安全.电钻和冲击钻的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills) |
| BS EN 60745-2-11-2003 |
手持式电动工具的安全.往复锯(曲线锯和刀锯)的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)) |
| BS EN 60745-2-12-2004 |
手持式电动工具的安全.混凝土振捣器的特殊要求 |
|
| BS EN 60745-2-14-2003 |
手持式电动工具.安全.刨床的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for planers) |
| BS EN 60745-2-17-2003 |
手持式电动工具的安全.木铣和修整机的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers) |
| BS EN 60745-2-18-2004 |
手持式电动工具的安全.打包工具的特殊要求 |
|
| BS EN 60745-2-18-2004 |
手持式电动工具.安全性 |
|
| BS EN 60745-2-18-2004 |
手持式电动工具.安全性 |
|
| BS EN 60745-2-2-2003 |
手持式电动工具的安全.电动旋具和冲击扳手的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches) |
| BS EN 60745-2-20-2003 |
手持式电动工具.安全.带锯的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for band saws) |
| BS EN 60745-2-4-2003 |
手持式电动工具的安全.盘式除外的砂轮机和抛光机的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type) |
| BS EN 60745-2-5-2003 |
手持式电动工具的安全.圆盘锯的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws) |
| BS EN 60745-2-6-2003 |
手持式电动工具的安全.电锤的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for hammers) |
| BS EN 60745-2-8-2003 |
手持式电动工具.安全.剪切机和步冲轮廓机的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for shears and nibblers) |
| BS EN 60745-2-9-2003 |
手持式电动工具的安全.攻丝机的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for tappers) |
| BS EN 60746-1-2003 |
电化学分析仪性能的表示法.总则 |
(Expression of performance of electrochemical analyzers - General) |
| BS EN 60746-2-2003 |
电化学分析仪性能的表示法.pH值 |
(Expression of performance of electrochemical analyzers - pH value) |
| BS EN 60746-3-2002 |
电化学分析器性能表示.电解质的导电率 |
(Expression of performance of electrochemical analyzers - Electrolytic conductivity) |
| BS EN 60747-15-2004 |
半导体分立器件和集成电路.孤立的电力半导体器件 |
|
| BS EN 60747-15-2004 |
半导体分立器件.孤立的电力半导体器件 |
|
| BS EN 60747-16-1-2002 |
半导体分立器件和集成电路.微波集成电路.放大器 |
(Discrete semiconductor devices and integrated circuits - Microwave integrated circuits - Amplifiers) |
| BS EN 60747-16-10-2004 |
半导体分立器件和集成电路.单片微波集成电路的技术验收程序 |
|
| BS EN 60747-16-10-2004 |
半导体器件.单片微波集成电路的技术验收程序(TAS) |
|
| BS EN 60747-16-3-2002 |
分立半导体器件和集成电路.微波集成电路.变频机 |
(Discrete semiconductor devices and integrated circuits - Microwave integrated circuits - Frequency converters) |
| BS EN 60747-16-4-2004 |
半导体分立器件和集成电路.微波集成电路.开关 |
|
| BS EN 60747-16-4-2004 |
半导体分立器件.微波集成电路.开关 |
|
| BS EN 60747-5-2-1998 |
半导体分立器件和集成电路.光电器件.基础额定值及特性 |
(Discrete semiconductor devices and integrated circuits - Optoelectronic devices - Essential ratings and characteristics) |
| BS EN 60747-5-3-1998 |
半导体分立器件和集成电路.光电器件.测量方法 |
(Discrete semiconductor devices and integrated circuits - Optoelectronic devices - Measuring methods) |
| BS EN 60749-1-2003 |
半导体器件.机械和气候试验方法.总则 |
(Semiconductor devices - Mechanical and climatic test methods - General) |
| BS EN 60749-10-2002 |
半导体器件.机械和气候试验方法.机械振动 |
(Semiconductor devices - Mechanical and climatic test methods - Mechanical shock) |
| BS EN 60749-11-2002 |
半导体器件.机械和气候试验方法.温度速变.双流体浸泡法 |
(Semiconductor devices - Mechanical and climatic test methods - Rapid change of temperature - Two-fluid-bath method) |
| BS EN 60749-12-2002 |
半导体器件.机械和气候试验方法.变频率振动 |
(Semiconductor devices - Mechanical and climatic test methods - Vibration, variable frequency) |
| BS EN 60749-13-2002 |
半导体器件.机械和气候试验方法.盐雾气氛 |
(Semiconductor devices - Mechanical and climatic test methods - Salt atmosphere) |
| BS EN 60749-14-2003 |
半导体器件.机械和气候试验方法.端子的耐久性 |
(Semiconductor devices - Mechanical and climatic test methods - Robustness of terminations (lead integrity)) |
| BS EN 60749-15-2003 |
半导体器件.机械和气候试验方法.通孔安装设备的耐钎焊温度 |
(Semiconductor devices - Mechanical and climatic test methods - Resistance to soldering temperature for through-hole mounted devices) |
| BS EN 60749-16-2003 |
半导体器件.机械和气候试验方法.粒子冲击噪音探测(PIND) |
(Semiconductor devices - Mechanical and climatic test methods - Particle impact noise detection (PIND)) |
| BS EN 60749-17-2003 |
半导体器件.机械和气候试验方法.中子辐照 |
(Semiconductor devices - Mechanical and climatic test methods - Neutron irradiation) |
| BS EN 60749-18-2003 |
半导体器件.机械和气候试验方法.电离辐射(总剂量) |
(Semiconductor devices - Mechanical and climatic test methods - Ionizing radiation (total dose)) |
| BS EN 60749-19-2003 |
半导体器件.机械和气候试验方法.模剪切强度 |
(Semiconductor devices - Mechanical and climatic test methods - Die shear strength) |
| BS EN 60749-2-2002 |
半导体器件.机械和气候试验方法.低气压 |
(Semiconductor devices - Mechanical and climatic test methods - Low air pressure) |
| BS EN 60749-20-2003 |
半导体器件.机械和气候试验方法.塑料包封的SMDs的抗湿及钎焊热度综合影响 |
(Semiconductor devices - Mechanical and climatic test methods - Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat) |
| BS EN 60749-22-2003 |
半导体器件.机械和气候试验方法.粘接强度 |
(Semiconductor devices - Mechanical and climatic test methods - Bond strength) |
| BS EN 60749-23-2004 |
半导体器件.机械和气候试验方法.高温操作寿命 |
|
| BS EN 60749-24-2004 |
半导体器件.机械和气候试验方法.加速耐湿性.无偏差HAST |
|
| BS EN 60749-25-2003 |
半导体器件.机械和气候试验方法.温度循环 |
(Semiconductor devices - Mechanical and climatic test methods - Temperature cycling) |
| BS EN 60749-29-2004 |
半导体器件.机械和气候试验方法.闭锁试验 |
|
| BS EN 60749-3-2002 |
半导体器件.机械和气候试验方法.外观检验 |
(Semiconductor devices - Mechanical and climatic test methods - External visual examination) |
| BS EN 60749-31-2003 |
半导体器件.机械和气候试验方法.塑料包封器件的易燃性(内部感应) |
(Semiconductor devices - Mechanical and climatic test methods - Flammability of plastic-encapsulated devices (internally induced)) |
| BS EN 60749-32-2003 |
半导体器件.机械和气候试验方法.塑料包封器件的易燃性(外部感应) |
(Semiconductor devices - Mechanical and climatic test methods - Flammability of plastic-encapsulated devices (externally induced)) |
| BS EN 60749-33-2004 |
半导体器件.机械和气候试验方法.加速耐湿性.无偏差压热器 |
|
| BS EN 60749-34-2004 |
半导体器件.机械和气候试验方法.动力循环 |
|
| BS EN 60749-36-2003 |
半导体器件.机械和气候试验方法.稳态加速 |
(Semiconductor devices - Mechanical and climatic test methods - Acceleration, steady state) |
| BS EN 60749-4-2002 |
半导体器件.机械和气候试验方法.稳态有毒热高度加速试验 |
(Semiconductor devices - Mechanical and climatic test methods - Damp heat, steady state, highly accelerated stress test (HAST)) |
| BS EN 60749-5-2003 |
半导体器件.机械和气候试验方法.稳态温度湿度偏差寿命试验 |
(Semiconductor devices - Mechanical and climatic test methods - Steady-state temperature humidity bias life test) |
| BS EN 60749-6-2002 |
半导体器件.机械和气候试验方法.高温下储存 |
(Semiconductor devices - Mechanical and climatic test methods - Storage at high temperature) |
| BS EN 60749-7-2002 |
半导体器件.机械和气候试验方法.其他残余气体的分析和内部水分含量的测量 |
(Semiconductor devices - Mechanical and climatic test methods - Internal moisture content measurement and the analysis of other residual gases) |
| BS EN 60749-8-2003 |
半导体器件.机械和气候试验方法.密封 |
(Semiconductor devices - Mechanical and climatic test methods - Sealing) |
| BS EN 60749-9-2002 |
半导体器件.机械和气候试验方法.制作性能 |
(Semiconductor devices - Mechanical and climatic test methods - Permanence of marking) |
| BS EN 60751-1996 |
工业铂电阻温度计敏感件 |
(Industrial platinum resistance thermometer sensors) |
| BS EN 60756-1991 |
非播放用磁带录像机.时基稳定性 |
(Non-broadcast video tape recorders - Time base stability) |
| BS EN 60758-2005 |
人造石英晶体.规范和使用指南 |
|
| BS EN 60763-1-1996 |
层压板规范.第1部分:定义、分类和一般要求 |
(Specification for laminated pressboard - Definitions, classification and general requirements) |
| BS EN 60763-2-1996 |
层压板规范.第2部分:试验方法 |
(Specification for laminated pressboard - Methods of test) |
| BS EN 60763-3-1-1996 |
层压板规范.第3部分:各种材料规范.活页1:预压层压板规范.型号LB 3.1.1,3.1.2,3.3.1和3.3.2 |
(Specification for laminated pressboard - Specifications for individual materials - Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2) |
| BS EN 60770-1-1999 |
用于工业处理控制系统的发射机.性能评估方法 |
(Transmitters for use in industrial-process control systems - Methods for performance evaluation) |
| BS EN 60770-2-2003 |
工业过程控制系统用变送器.检验和常规试验方法 |
(Transmitters for use in industrial-process control systems - Methods for inspection and routine testing) |
| BS EN 60774-1-1994 |
VHS型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系统;第1部分:VHS和袖珍VHS盒式录像带系统 |
(Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - VHS and compact VHS video cassette system) |
| BS EN 60774-2-2000 |
使用VHS型12.65mm(0.5in)磁带的螺旋扫描盒式磁带录像系统.调频录音 |
(Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - FM audio recording) |
| BS EN 60774-3-1994 |
VHS型的12.65mm(0.5 in)螺旋盒式磁带录像磁带系统规范.第1部分:S-VHS |
(Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - S-VHS) |
| BS EN 60774-4-2004 |
使用12.65mm(0.5in)磁带的VHS型螺旋扫描盒式磁带录像系统.S-VHS盒式视频磁带系统.ET模式 |
|
| BS EN 60789-1992 |
放射性核素成象装置的特殊和试验条件.安格型γ射线照相机 |
(Methods of test for Anger type gamma cameras) |
| BS EN 60793-1-1-2003 |
光纤.测量方法和试验规程.总则和指南 |
(Optical fibres - Measurement methods and test procedures - General and guidance) |
| BS EN 60793-1-20-2002 |
光纤.测量方法和试验规程.纤维几何结构 |
(Optical fibres - Measurement methods and test procedures - Fibre geometry) |
| BS EN 60793-1-21-2002 |
光学纤维.测量方法和试验规程.覆层几何 |
(Optical fibres - Measurement methods and test procedures - Coating geometry) |
| BS EN 60793-1-22-2002 |
光纤.测量方法和试验规程.长度测量 |
(Optical fibres - Measurement methods and test procedures - Length measurement) |
| BS EN 60793-1-30-2002 |
光纤.测量方法和试验规程.纤维验证试验 |
(Optical fibres - Measurement methods and test procedures - Fibre proof test) |
| BS EN 60793-1-31-2002 |
光纤.测量方法和试验规程.抗拉强度 |
(Optical fibres - Measurement methods and test procedures - Tensile strength) |
| BS EN 60793-1-32-2004 |
光纤.测量方法和试验规程.涂层可剥性 |
|
| BS EN 60793-1-32-2004 |
光纤.测量方法和试验规程.覆层可剥离性 |
|
| BS EN 60793-1-32-2004 |
光纤.测量方法和试验规程.覆层可剥离性 |
|
| BS EN 60793-1-33-2002 |
光学纤维.测量方法和试验规程.应力腐蚀敏感性 |
(Optical fibres - Measurement methods and test procedures - Stress corrosion susceptibility) |
| BS EN 60793-1-34-2002 |
光学纤维.测量方法和试验规程.纤维卷曲 |
(Optical fibres - Measurement methods and test procedures - Fibre curl) |
| BS EN 60793-1-40-2004 |
光纤.测量方法和试验规程.衰减 |
|
| BS EN 60793-1-40-2004 |
光纤.测量方法和试验规程.衰减 |
|
| BS EN 60793-1-40-2004 |
光纤.测量方法和试验规程.衰减 |
|
| BS EN 60793-1-41-2004 |
光学纤维.测量方法和试验规程.频带宽度 |
|
| BS EN 60793-1-42-2002 |
光学纤维.测量方法和试验规程.色散 |
(Optical fibres - Measurement methods and test procedures - Chromatic dispersion) |
| BS EN 60793-1-43-2002 |
光学纤维.测量方法和试验规程.数值孔径 |
(Optical fibres - Measurement methods and test procedures - Numerical aperture) |
| BS EN 60793-1-44-2002 |
光纤.测量方法和试验规程.截止波长 |
(Optical fibres - Measurement methods and test procedures - Cut-off wavelength) |
| BS EN 60793-1-45-2004 |
光纤.测量方法和试验规程.模场直径 |
|
| BS EN 60793-1-45-2004 |
光纤.测量方法和试验规程.模场直径 |
|
| BS EN 60793-1-45-2004 |
光纤.测量方法和试验规程.模场直径 |
|
| BS EN 60793-1-46-2002 |
光学纤维.测量方法和试验规程.光透射率变化的监测 |
(Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance) |
| BS EN 60793-1-47-2002 |
光学纤维.测量方法和试验规程.MACROBENDING损耗 |
(Optical fibres - Measurement methods and test procedures - Macrobending loss) |
| BS EN 60793-1-48-2003 |
光学纤维.测量方法和试验规程.偏振模色散 |
(Optical fibres - Measurement methods and test procedures - Polarization mode dispersion) |
| BS EN 60793-1-49-2003 |
光学纤维.测量方法和试验规程.模时延差 |
(Optical fibres - Measurement methods and test procedures - Differential mode delay) |
| BS EN 60793-1-50-2002 |
光学纤维.测量方法和试验规程.湿热(稳态) |
(Optical fibres - Measurement methods and test procedures - Damp heat (steady state)) |
| BS EN 60793-1-51-2002 |
光学纤维.测量方法和试验规程.干热 |
(Optical fibres - Measurement methods and test procedures - Dry heat) |
| BS EN 60793-1-52-2002 |
光学纤维.测量方法和试验规程.温度的变化 |
(Optical fibres - Measurement methods and test procedures - Change of temperature) |
| BS EN 60793-1-53-2002 |
光学纤维.测量方法和试验规程.浸水 |
(Optical fibres - Measurement methods and test procedures - Water immersion) |
| BS EN 60793-1-54-2003 |
光学纤维.测量方法和试验规程.γ辐射 |
(Optical fibres - Measurement methods and test procedures - Gamma irradiation) |
| BS EN 60793-2-10-2003 |
光纤.产品规范.A1类多模光纤分规范 |
(Optical fibres - Product specifications - Sectional specification for category A1 multimode fibres) |
| BS EN 60793-2-10-2005 |
光纤.产品规范.A1类多模光纤分规范 |
|
| BS EN 60793-2-20-2002 |
光学纤维.产品规范.类别 A2多模光纤的分规范 |
(Optical fibres - Product specifications - Sectional specification for category A2 multimode fibres) |
| BS EN 60793-2-2004 |
光纤.产品规范.总则 |
|
| BS EN 60793-2-30-2003 |
光纤.产品规范.A3类多模光纤分规范 |
(Optical fibres - Product specifications - Sectional specification for category A3 multimode fibres) |
| BS EN 60793-2-40-2002 |
光学纤维.产品规范.类别 A4多模光纤的分规范 |
(Optical fibres - Product specifications - Sectional specification for category A4 multimode fibres) |
| BS EN 60793-2-50-2003 |
光纤.产品规范.B级单模光纤分规范 |
(Optical fibres - Product specifications - Sectional specification for class B single-mode fibres) |
| BS EN 60793-2-50-2004 |
光纤.产品规范.B级单模纤维的分规范 |
|
| BS EN 60793-2-50-2004 |
光纤.产品规范.B级单模纤维的分规范 |
|
| BS EN 60794-1-1-2002 |
光纤电缆.一般规范.总则 |
(Optical fibre cables - Generic specification - General) |
| BS EN 60794-1-2-2003 |
光学纤维电缆.总规范.基础光缆试验规程 |
(Optical fibre cables - Generic specification - Basic optical cable test procedures) |
| BS EN 60794-2-10-2003 |
光缆.室内光缆.单股光缆和双股光缆的类规范 |
(Optical fibre cables - Indoor cables - Indoor cables - Family specification for simplex and duplex cables) |
| BS EN 60794-2-20-2003 |
光缆.室内光缆.多纤配电光缆的类规范 |
(Optical fibre cables - Indoor cables - Family specification for multi-fibre optical distribution cables) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com