标准号 |
中文名称 |
英文名称 |
| EN ISO 11957-1996 |
声学客舱隔声性能的测定实验室测量和现场测量 |
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN ISO 11960-2004 |
石油和天然气工业.油井套管或油管用钢管 |
|
| EN ISO 11961-1996 |
石油和天然气工业钻井杆用钢管规范 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996) |
| EN ISO 11963-1995 |
塑料聚碳酸酯板材类型、尺寸和特性 |
Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:1995) |
| EN ISO 11969-1996 |
水质砷的测定原子吸收光谱法(氢化物技术) |
Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
| EN ISO 11978-2000 |
眼科光学隐形眼镜和隐形眼镜保护产品制造商提供的信息 |
Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000) |
| EN ISO 11979-1-1999 |
眼科植入物眼内透镜第1部分：词汇 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999) |
| EN ISO 11979-2-1999 |
眼科植入物眼内透镜第2部分：光学特性和测试方法 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999) |
| EN ISO 11979-4-2000 |
眼科植入物眼内透镜第4部分：标签和信息 |
Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000) |
| EN ISO 11980-1997 |
眼科光学隐形眼镜和隐形眼镜保护产品临床检测指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997) |
| EN ISO 11981-1999 |
眼科光学隐形眼镜和隐形眼镜保护产品隐形眼镜与隐形眼镜保护产品物理兼容性的测定 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:1999) |
| EN ISO 11984-1999 |
眼科光学隐形眼镜刚性镜弯曲和断裂强度的测定 |
Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999) |
| EN ISO 11985-1997 |
眼科光学隐形眼镜紫外线辐射的老化试验(试管法) |
Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997) |
| EN ISO 11986-2000 |
眼科光学隐形眼镜和隐形眼镜保护产品保护液吸收和释放测定指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999) |
| EN ISO 11987-1997 |
眼科光学隐形眼镜储存寿命的测定 |
Ophthalmic Optics - Contact lenses - Determination of shell-life (ISO 11987:1997) |
| EN ISO 11990-2003 |
光学和光学仪器激光和激光设备导管激光抗性的测定 |
Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003) |
| EN ISO 11998-2001 |
色漆和清漆涂层的耐湿式洗涤和清洗性测定 |
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998) |
| EN ISO 120-1998 |
塑料酚－醛模塑件游离氨和铵化合物的测定比色法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977) |
| EN ISO 12005-2003 |
激光和激光设备激光束参数的试验方法偏振 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) |
| EN ISO 12017-1996 |
塑料聚甲基丙烯酸甲酯双合板和三合板试验方法 |
Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995) |
| EN ISO 12020-2000 |
水质铝的测定原子吸收光谱法 |
Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997) |
| EN ISO 12048-2000 |
包装满装的运输包装使用压力试验机的压力试验和堆积试验 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994) |
| EN ISO 12058-1-2002 |
塑料用落球粘度计测定粘度 第1部分：倾斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) |
| EN ISO 1207-1994 |
开槽圆柱螺钉产品等级A级 |
Slotted cheese head screws - Product grade A (ISO 1207:1992) |
| EN ISO 12085-1997 |
产品几何量技术规范(GPS)表面结构：轮廓法图形参数 |
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
| EN ISO 12086-1-1999 |
塑料含氟聚合物分散体模塑和挤塑材料第1部分：命名系统和基本规范 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:1995) |
| EN ISO 12086-2-1999 |
塑料含氟聚合物分散体模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995) |
| EN ISO 1211-2001 |
牛乳脂肪含量的测定重量分析法(参照法) |
Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:1999) |
| EN ISO 12114-1997 |
纤维增强塑料热固性模压塑料和预浸料固化特性的测定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997) |
| EN ISO 12115-1997 |
纤维增强塑料热固性模压塑料和预浸料流动性、熟化期和适用期的测定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997) |
| EN ISO 12138-1996 |
纺织品织物燃烧试验前的家庭洗涤方法 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996) |
| EN ISO 12156-1-2000 |
柴油使用高频往复装置(HFRR)进行润滑油评定第1部分：试验方法(包括技术勘误) |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997, including Technical Corrigendum 1:1998) |
| EN ISO 12162-1995 |
压力用热塑性塑料管材和管件分级和命名总体使用(设计)系数 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995) |
| EN ISO 12163-2000 |
牙科基托/模型蜡 |
Dental baseplate/modelling wax (ISO 12163:1999) |
| EN ISO 12179-2000 |
产品几何量技术规范(GPS)表面结构：轮廓法接触(触针)式仪器的校准 |
Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments (ISO 12179:2000) |
| EN ISO 12185-1996 |
原油和石油产品密度的测定振动的U形管法 |
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN ISO 12193-1999 |
动植物油脂铅含量的测定石墨炉原子吸收法 |
Animal and vegetable fats and oils - Determination of lead content - Graphite furnace atomic absorption method (ISO 12193:1994) |
| EN ISO 12193-2004 |
动植物油脂.用直接石墨炉原子吸收光谱法测定铅含量 |
|
| EN ISO 12205-1996 |
石油产品中间馏分燃料的氧化安定性的测定 |
Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| EN ISO 12209-1-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第1部分：轭型连接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000) |
| EN ISO 12209-2-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第2部分：螺纹式连接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000) |
| EN ISO 12209-3-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第3部分：230 bar 阀适配器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000) |
| EN ISO 12215-1-2000 |
小艇船体结构和尺寸第1部分：材料：热固性树脂、玻璃纤维增强材料、基准层压板 |
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| EN ISO 12215-2-2002 |
小艇船体结构和尺寸第2部分：夹层结构用芯型材料、嵌入材料 |
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| EN ISO 12215-3-2002 |
小艇船体结构和尺寸第3部分：材料：钢、铝合金、木材、其它材料 |
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| EN ISO 12215-4-2002 |
小艇船体结构和尺寸第4部分：车间及生产 |
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| EN ISO 12216-2002 |
小艇窗、船窗、舱口、固定舷窗和门强度和水密封度要求 |
Small craft - Windows, portlights, hatches, dead-lights and doors - Strength and watertightness requirements (ISO 12216:2002) |
| EN ISO 12217-1-2002 |
小艇稳定性及浮力的评估和分类第1部分：船体长度大于或等于6m的非帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002) |
| EN ISO 12217-2-2002 |
小艇稳定性及浮力的评估和分类第2部分：船体长度大于或等于6m的帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002) |
| EN ISO 12217-3-2002 |
小艇稳定性及浮力的评估和分类第3部分：船体长度小于6m的小船 |
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002) |
| EN ISO 12224-1-1998 |
实芯和药芯软钎焊丝规范和试验方法第1部分：分类和性能要求 |
Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997) |
| EN ISO 12224-2-1999 |
软钎焊用药芯焊丝规范和试验方法第2部分：钎剂含量的测定 |
Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997) |
| EN ISO 12224-3-2003 |
实芯和药芯软钎焊丝规范和试验方法第3部分：测定药芯软钎焊丝效果的湿平衡法 |
Solder wire, solid and flux cored - Specifications and test methods - Part 3: Wetting balance test method for flux core solder wire efficacy (ISO 12224-3:2003) |
| EN ISO 12228-1999 |
动植物油脂甾醇和总甾醇含量的测定气相色谱法 |
Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999) |
| EN ISO 12236-1996 |
土工布及相关产品静态顶破试验(CBR试验) |
Geotextiles and geotextile-related products - Static puncture test (CBR-Test) (ISO 12236:1996) |
| EN ISO 12241-1998 |
建筑设备和工业装置绝热计算规则 |
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998) |
| EN ISO 1234-1997 |
开口销 |
Split pins (ISO 1234:1997) |
| EN ISO 12543-1-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第1部分：定义和零部件的描述 |
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998) |
| EN ISO 12543-2-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第2部分：夹层安全玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998) |
| EN ISO 12543-3-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第3部分：夹层玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998) |
| EN ISO 12543-4-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第4部分：耐久性检验方法 |
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) |
| EN ISO 12543-5-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第5部分：尺寸和板边精加工 |
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998) |
| EN ISO 12543-6-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第6部分：外观 |
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998) |
| EN ISO 12567-1-2000 |
门、窗热性能热箱法测定传热系数第1部分：整樘门和窗 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000) |
| EN ISO 12569-2000 |
建筑物热性能建筑物的换气率测定示踪气体稀释法 |
Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000) |
| EN ISO 12570-2000 |
建筑材料和制品的湿热性能高温干燥法测定含湿率 |
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000) |
| EN ISO 12571-2000 |
建筑材料和制品湿热性能吸湿性质的测定 |
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000) |
| EN ISO 12572-2001 |
建筑材料及制品的温湿性能透水蒸汽性的测定 |
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001) |
| EN ISO 1264-1997 |
塑料氯乙烯均聚物和共聚物树脂水萃取物的pH值测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980) |
| EN ISO 1265-1997 |
塑料聚氯乙烯树脂杂质和外来杂质数的测定 |
Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles (ISO 1265:1979) |
| EN ISO 12676-2003 |
耐火制品耐一氧化碳性的测定 |
Refractory products - Determination of resistance to carbon monoxide (ISO 12676:2000) |
| EN ISO 12677-2003 |
用XRF法作耐火制品的化学分析熔化铸珠法 |
Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003) |
| EN ISO 12683-2004 |
机械镀锌涂层.规范和试验方法 |
|
| EN ISO 12687-1998 |
金属覆盖层孔隙率试验潮湿硫(硫化)试验 |
Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996) |
| EN ISO 12706-2000 |
无损检测术语穿透试验用术语 |
Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) |
| EN ISO 12737-1999 |
金属材料平面变形断裂韧性的测定 |
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:1996) |
| EN ISO 12777-1-1996 |
托盘连接件的试验方法第1部分：托盘用钉子、其他榫钉型紧固件和U形钉的抗弯试验 |
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994) |
| EN ISO 12777-2-2000 |
托盘连接件的试验方法第2部分：托盘用钉子和U形钉的抗拉试验 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
| EN ISO 12777-3-2002 |
托盘连接件的试验方法第3部分：托盘连接件的强度测定 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
| EN ISO 128-20-2001 |
技术制图画法的一般原则第20部分：图线 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| EN ISO 128-21-2001 |
技术制图画法的一般原则第21部分：计算机辅助设计(CAD)系统用图线的表示 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems (ISO 128-21:1997) |
| EN ISO 12864-1997 |
眼科光学隐形眼镜杂散光的测定 |
Ophthalmic optics - Contact lenses - Determination of scattered light (ISO 12864:1997) |
| EN ISO 12865-1998 |
眼科仪器检眼镜 |
Ophthalmic instruments - Retinoscopes (ISO 12865:1998) |
| EN ISO 12867-1998 |
眼科仪器试验架 |
Ophthalmic instruments - Trial frames (ISO 12867:1998) |
| EN ISO 12870-1997 |
眼科光学眼镜镜框一般要求和试验方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997) |
| EN ISO 12870-2004 |
眼科光学.眼镜架.要求和试验方法 |
|
| EN ISO 12894-2001 |
热环境的人类工效学暴露于极热或极冷环境时个人的医学观察 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN ISO 12922-2002 |
润滑剂、工业润滑油和有关产品(L类)H组(液压系统)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品种的规格(包 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001) |
| EN ISO 12937-2000 |
石油产品水分的测定库仑卡尔·费休滴定法 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN ISO 12944-1-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第1部分：总则 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998) |
| EN ISO 12944-2-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第2部分：环境分类 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998) |
| EN ISO 12944-3-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第3部分：设计内容 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998) |
| EN ISO 12944-4-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第4部分：表面类型和表面处理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types and surface preparation (ISO 12944-4:1998) |
| EN ISO 12944-5-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第5部分：防护漆体系 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998) |
| EN ISO 12944-6-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第6部分：实验室性能试验方法 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:1998) |
| EN ISO 12944-7-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第7部分：涂漆工艺的实施和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998) |
| EN ISO 12944-8-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第8部分：新工艺和维修规范的开发 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998) |
| EN ISO 12945-1-2000 |
纺织品织物表面起球和起毛性的测定第1部分：起球箱法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000) |
| EN ISO 12945-2-2000 |
纺织品织物表面起球和起毛性的测定第2部分：改型的马丁代尔仪法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000) |
| EN ISO 12947-1-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第1部分：马丁代尔耐磨实验仪 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998) |
| EN ISO 12947-2-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第2部分：试样破损的测定 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998) |
| EN ISO 12947-3-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第3部分：质量损失的测定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998) |
| EN ISO 12947-4-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第4部分：外观变化的评定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998) |
| EN ISO 12952-1-1998 |
纺织品床上用品的燃烧性能第1部分：由发烟燃烧的香烟为点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998) |
| EN ISO 12952-2-1998 |
纺织品床上用品的燃烧性能第2部分：由发烟燃烧的香烟为点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998) |
| EN ISO 12952-3-1998 |
纺织品床上用品的燃烧性能第3部分：小点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998) |
| EN ISO 12952-4-1998 |
纺织品床上用品的燃烧性能第4部分：小点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998) |
| EN ISO 12956-1999 |
土工布及相关产品特征孔径的测定 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999) |
| EN ISO 12958-1999 |
土工布及相关产品平面内水流量的测定 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999) |
| EN ISO 13000-1-1997 |
塑料聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997) |
| EN ISO 13000-2-1997 |
塑料聚四氟乙烯(PTFE)半成品 第2部分：试样的制备和性能的测定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997) |
| EN ISO 13002-1998 |
碳纤维长丝纱命名体系 |
Carbon fibre - Designation system for filament yarns (ISO 13002:1998) |
| EN ISO 1302-2002 |
产品几何量技术规范(GPS)技术产品文件表面特征的表示 |
Geometrical Product specification (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN ISO 1307-1995 |
一般工业用橡胶和塑料软管孔径和公差及长度公差 |
Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) |
| EN ISO 13090-1-1998 |
机械振动与冲击试验及与人有关的实验安全方面指南第1部分：机械振动和反复冲击下的人体试验 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998) |
| EN ISO 13212-1999 |
眼科光学隐形眼镜保护产品储存寿命的测定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life (ISO 13212:1999) |
| EN ISO 13230-1999 |
眼科光学条形码规范 |
Ophthalmic optics - Bar code specifications (ISO 13230:1999) |
| EN ISO 13294-1997 |
牙科手机牙钻气动机 |
Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 13295-1996 |
牙科旋转器械心轴 |
Dental rotary instruments - Mandrels (ISO 13295:1994) |
| EN ISO 13297-2000 |
小艇电气系统交流系统 |
Small craft - Electrical systems - Alternating current installations (ISO 13297:2000) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com