标准号 |
中文名称 |
英文名称 |
BS EN 28736-1992 |
未淬硬内螺纹锥销 |
(Taper pins with internal thread, unhardened) |
BS EN 28737-1992 |
未淬硬外螺纹锥销 |
(Taper pins with external thread, unhardened) |
BS EN 28738-1992 |
U形销的平垫圈.A级产品 |
(Plain washers for clevis pins - Product grade A) |
BS EN 2874-1996 |
钝化耐热镍基合金制长双六角头紧公差标准柄中长螺纹螺栓.等级:1550MPa(室温)/315℃ |
(Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 鳦) |
BS EN 28749-1992 |
销子和带槽销的剪切试验 |
(Pins and grooved pins - Shear test) |
BS EN 28768-1987 |
满包运输包装件.耐颠覆损坏的性能测定方法 |
(Complete, filled transport packages - Method for determination of resistance to damage by toppling) |
BS EN 288-2-1992 |
金属材料焊接程序的规范和认可.电弧焊焊接程序规范 |
(Specification and approval of welding procedures for metallic materials - Welding procedures specification for arc welding) |
BS EN 288-3-1992 |
金属材料焊接程序的规范和认可.钢的电弧焊焊接程序试验 |
(Specification and approval of welding procedures for metallic materials - Welding procedure tests for the arc welding of steels) |
BS EN 288-4-1992 |
金属材料焊接程序规范和认可.铝及铝合金弧焊的焊接程序检验 |
(Specification and approval of welding procedures for metallic materials - Welding procedure tests for the arc welding of aluminium and its alloys) |
BS EN 288-7-1995 |
金属材料焊接程序的规范和认可.使用标准焊接程序的电弧焊接的认可 |
(Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure for arc welding) |
BS EN 288-8-1995 |
金属材料焊接程序的规范和认可.用预生产焊接试验进行认可 |
(Specification and approval of welding procedures for metallic materials - Approval by a pre-production welding test) |
BS EN 288-9-1999 |
金属材料焊接程序的规范和认可.传输管道陆地和海岸对焊管道焊接用焊接方法试验 |
(Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines) |
BS EN 28839-1992 |
紧固件机械性能.有色金属制螺栓、螺钉、螺柱和螺母 |
(Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) |
BS EN 2884-1996 |
MoS2润滑的阳极氧化钛合金制短螺纹粗公差标准柄带翼型十字槽的大柱头螺钉.等级:1100MPa(室温)/315℃ |
(Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
BS EN 28846-1993 |
小船.电气装置.周围可燃气体的引燃防护 |
(Small craft - Electrical devices - Protection against ignition of surrounding flammable gases) |
BS EN 28848-1993 |
小船.远程操纵系统 |
(Small craft - Remote steering systems) |
BS EN 2885-1996 |
镀镉合金钢制短螺纹粗公差标准柄带翼型十字槽的大柱头螺钉.等级:900MPa(室温)/235℃ |
(Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦) |
BS EN 2886-1996 |
镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的大柱头螺钉.等级:900MPa(室温)/235℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 鳦) |
BS EN 2887-1995 |
钝化耐蚀钢制头部加螺纹的标准六角头螺栓.等级:600MPa(室温)/425℃ |
(Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 鳦) |
BS EN 28877-1994 |
信息技术. 系统间电子通信和信息交换基准点S和T的ISDN基本存取接口用插接器和接点分配 |
(Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T) |
BS EN 2888-1995 |
钝化耐蚀钢制短螺纹粗公差标称柄标称六角头螺栓.等级:600MPa(室温)/425℃ |
(Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 鳦) |
BS EN 2889-1995 |
镀镉合金钢制短螺纹粗公差标准柄标准六角头螺栓.等级:900MPa(室温)/235℃ |
(Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 鳦) |
BS EN 289-1994 |
塑料和橡胶用的压制和输送机设计和制造的技术安全要求 |
(Rubber and plastics machinery - Compression and transfer moulding presses - Safety requirements for the design) |
BS EN 289-2004 |
塑料和橡胶机械.压力机.安全要求 |
|
BS EN 28960-1993 |
家用和类似用途的冷藏箱、冰冻食品冷藏柜和食品冷冻箱空气噪音的测量 |
(Refrigerators, frozen food storage cabinets and food freezers for household and similar use - Measurement of emission of airborne acoustical noise) |
BS EN 2897-1996 |
镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的大柱头螺钉.等级:1100MPa(室温)/235℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 鳦) |
BS EN 28970-1991 |
木结构.用机械紧固件连接的接头试验.木材密度要求 |
(Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density) |
BS EN 28996-1994 |
人类工效学.代谢热量的测定 |
(Ergonomics - Determination of metabolic heat production) |
BS EN 29008-1994 |
玻璃瓶垂直度试验方法 |
(Glass bottles - Verticality - Test method) |
BS EN 29009-1994 |
玻璃容器.以容器底作基准的瓶口高度和不平行性.试验方法 |
(Glass containers - Height and non-parallelism of finish with reference to container base - Test methods) |
BS EN 29046-1991 |
房层建筑.密封剂.常温下粘附内聚特性的测定 |
(Building construction - Sealants - Determination of adhesion/cohesion properties at constant temperature) |
BS EN 29048-1991 |
房屋建筑.连接件.使用标准化仪器测定密封剂可挤压性 |
(Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus) |
BS EN 29052-1-1992 |
声学.动态劲度的测定方法.在住宅中浮隔地板下用的材料 |
(Acoustics - Method for the determination of dynamic stiffness - Materials used under floating floors in dwellings) |
BS EN 29053-1993 |
声学.声学用材料.耐气流的测定 |
(Acoustics - Materials for acoustical applications - Determination of airflow resistance) |
BS EN 2906-1994 |
FE-PA92HT(A 286)耐热钢制双六角头自锁螺母.等级:1100MPa(室温)/650℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
BS EN 2907-1996 |
镀银FE-PA92HT(A286)耐热钢制双六角头自锁螺母.等级:1100MPa(室温)/650℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650℃) |
BS EN 29070-1991 |
信息技术.SGML支援设备.公用文本编写人标识符登记程序 |
(Information technology - SGML support facilities - Registration procedures for public text owner identifiers) |
BS EN 29073-1-1990 |
纺织品.非织造品的试验方法.第1部分:单位面积质量的测定 |
(Methods of test for nonwovens - Methods of test for nonwovens - Determination of mass per unit area) |
BS EN 29073-3-1990 |
纺织品.非织造品的试验方法.第3部分:抗张强度和伸张度的测定 |
(Methods of test for nonwovens - Methods of test for nonwovens - Determination of tensile strength and elongation) |
BS EN 2908-1994 |
FE-PA92HT(A286)耐热钢双六角头自锁深镗孔螺母.等级:1100MPa(室温)/650℃ |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
BS EN 2909-1995 |
镀银FE-PA92HT(A286)耐热钢制双六角头自锁深镗孔螺母.等级:1100MPa(室温)/650C° |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃) |
BS EN 29090-1992 |
气焊以及类似的处理过程中设备的气密特性 |
(Specification for gas tightness of equipment for gas welding and allied processes) |
BS EN 29092-1992 |
纺织品.无纺织品定义 |
(Textiles - Nonwovens - Definition) |
BS EN 291-1992 |
压力为200毫巴及其以下的家用可燃气体静态密封用橡胶密封件的材料规范 |
(Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specification for material) |
BS EN 2910-1994 |
FE-PA92HT(A286)耐热钢制自锁柄螺母.等级:1100MPa(室温)/650℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
BS EN 29104-1991 |
封闭管道中液体流量测量.电磁液体流量计性能评定方法 |
(Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids) |
BS EN 2911-1995 |
镀银FE-PA92HT(A286)耐热钢制自锁柄螺母.等级:1100MPa(室温)/650℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃) |
BS EN 29117-1991 |
漆的试验方法.与漆膜形成有关的试验.漆和清漆.完全干燥状态和完全干燥时间的测定.试验方法 |
Methods of test for paints - Tests associated with paint film formation - Paints and varnishes - Determination of through-dry state and through-dry time - Method of test |
BS EN 2912-1996 |
铝合金制阳极化或铬酸钝化的大外径平垫圈 |
(Washers, flat, large diameter, in aluminium alloy, anodized or chromated) |
BS EN 2913-2000 |
钢制镀镉的大直径平垫圈 |
(Washers, flat, large diameter, in steel, cadmium plated) |
BS EN 2914-1996 |
耐高温钢制钝化的大外径平垫圈 |
(Washers, flat, large diameter, in heat resisting steel, passivated) |
BS EN 29168-1994 |
牙钻手柄.软管连接件 |
(Dental handpieces - Hose connectors) |
BS EN 29171-1-1991 |
信息技术.信息交换用130mm只写一次的盒式光盘.空白盒式光盘 |
(Information technology - 130 mm optical disk cartridge, write once, for information interchange - Unrecorded optical disk cartridge) |
BS EN 29171-2-1991 |
信息技术.信息交换用130mm只写一次的盒式光盘.记录格式 |
(Information technology - 130 mm optical disk cartridge, write once, for information interchange - Recording format) |
BS EN 29202-1993 |
珠宝.贵重金属合金的纯度 |
(Jewellery - Fineness of precious metal alloys) |
BS EN 29241-2-1993 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.作业要求指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Guidance on task requirements) |
BS EN 29241-3-1993 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.视频显示要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Visual display requirements) |
BS EN 2925-1994 |
FE-PA92HT(A286)耐热钢制长螺纹薄柄双六角头螺栓.等级:900MPa(室温)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286) - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 2926-1996 |
镀银FE-FA92HT(A286)耐热钢制长螺纹薄柄双六角头螺栓.等级:900MPa(室温)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 2927-1996 |
NI-P100HT(铬镍铁合金 718)耐高温镍基合金制长螺纹薄柄双六角头螺栓.等级:1275MPa(室温)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650℃) |
BS EN 2928-1996 |
镀银NI-P100HT(铬镍铁合金 718)耐高温镍基合金制长螺纹薄柄双六角头螺栓.等级:1275MPa(室温)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃) |
BS EN 2929-1996 |
耐热镍基合金NI-P101HT(Waspaloy)制长螺纹薄柄十二角头螺栓.等级:1210MPa(室温)/730℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
BS EN 293-1992 |
压力油雾化喷嘴.最低限度的要求.试验 |
(Specification for oil pressure atomizing nozzles - Minimum requirements - Testing) |
BS EN 2930-1996 |
镀银NI-P101HT(Waspaloy)耐高温镍基合金制长螺纹薄柄双六角头螺栓.等级:1210MPa(室温)/730℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 ℃) |
BS EN 2931-1994 |
FE-PA92HT(A286)耐热钢制长螺纹薄柄T型头螺栓.等级:900MPa(室温)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 29313-1992 |
点焊设备.冷却管 |
(Specification for resistance spot welding equipment - Cooling tubes) |
BS EN 2932-1996 |
镀银FE-PA92HT(A286)耐热钢制长螺纹薄柄T型头螺栓.等级:900MPa(室温)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 2933-1996 |
NI-P100HT(铬镍铁合金 718)耐高温镍基合金制长螺纹薄柄T型头螺栓.等级:1275MPa(室温)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650℃) |
BS EN 29333-1992 |
牙科用焊料规范 |
(Specification for dental brazing materials) |
BS EN 2934-1996 |
镀银NI-P100HT(铬镍铁合金 718)耐高温镍基合金制长螺纹薄柄T型头螺栓.等级:1275MPa(室温)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650℃) |
BS EN 2935-1996 |
NI-P101HT(Waspaloy)耐高温镍基合金制长螺纹薄柄T型头螺栓.等级:1210MPa(室温)/730℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification:1210 MPa (at ambient temperature)/730 ℃) |
BS EN 2936-1996 |
镀银NI-P101HT(Waspaloy)耐高温镍基合金制长螺纹薄柄T型头螺栓.等级:1210MPa(室温)/730℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
BS EN 29367-1-1991 |
滚装船上汽车捆绑和固定装置的一般要求.第1部分:商业用车辆和车辆组合.半挂车除外 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded) |
BS EN 29367-2-1994 |
滚装船上汽车捆绑和固定装置的一般要求.第2部分:半挂车 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Semi-trailers) |
BS EN 2937-1994 |
FE-PA92HT(A286)耐高温钢制头部加螺纹六角头螺钉.等级:900 MPa(室温)/650℃ |
(Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 2938-1996 |
镀银FE-PA92HT(A286)耐高温钢制头部加螺纹六角头螺钉.等级:900 MPa(室温)/650℃ |
(Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 2939-1994 |
FE-PA92HT(A 286)耐高温钢制头部加螺纹的翼型十字槽100°埋头螺钉.等级:900MPa(室温)/650℃ |
(Screws, 100°countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃) |
BS EN 294-1992 |
机械安全.上肢可及危险区的安全距离 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs) |
BS EN 2940-1996 |
镀银FE-PA92HT(A286)耐高热钢制头部加螺纹的翼形十字槽100°埋头螺钉.等级:900MPa(室温)/650℃ |
(Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900MPa (at ambient temperature)/650℃) |
BS EN 2942-1998 |
耐热镍基合金NI-PH2801(铬镍铁合金X750)镀银螺旋形线圈自锁式螺纹嵌镶件 |
(Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated) |
BS EN 2943-1998 |
自锁紧螺旋盘绕插件.技术规范 |
(Inserts, screw thread, helical coil, self-locking - Technical specification) |
BS EN 2944-1998 |
耐腐蚀钢FE-PA3004螺旋形线圈自锁式螺纹嵌镶件 |
(Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004) |
BS EN 2945-1998 |
螺旋形线圈自锁式螺纹嵌镶件.组装程序 |
(Inserts, screw thread, helical coil, self-locking - Assembly procedure) |
BS EN 29453-1994 |
软焊锡料合金.化学成分和形状 |
(Soft solder alloys - Chemical compositions and forms) |
BS EN 29454-1-1994 |
软钎焊剂.分类和要求.分类、标签和包装 |
(Soft soldering fluxes - Classification and requirements - Classification, labelling and packaging) |
BS EN 29455-1-1994 |
软钎焊剂.试验方法.不挥发物质的测定.重量分析方法 |
(Soft soldering fluxes - Test methods - Determination of non-volatile matter, gravimetric method) |
BS EN 29455-11-1993 |
软钎焊剂.试验方法.第11部分:钎焊剂残留物的可溶性 |
(Soft soldering fluxes - Test methods - Solubility of flux residues) |
BS EN 29455-14-1993 |
软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定 |
(Soft soldering fluxes - Test methods - Assessment of tackiness of flux residues) |
BS EN 29455-5-1993 |
软钎焊剂.试验方法.第5部分:铜镜试验 |
(Soft soldering fluxes - Test methods - Copper mirror test) |
BS EN 29455-8-1993 |
软钎焊剂.试验方法.第8部分:锌含量测定 |
(Soft soldering fluxes - Test methods - Determination of zinc content) |
BS EN 2948-1997 |
钝化耐热钢制有耳垫圈 |
(Washers, tab, in heat resisting steel, passivated) |
BS EN 2949-1997 |
钝化耐腐蚀钢制有线锁紧垫圈 |
(Washers, wire locking, in corrosion resisting steel, passivated) |
BS EN 295-1-1991 |
排水管和下水道用陶管和管配件及管接头.要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements) |
BS EN 295-2-1991 |
排水管和下水道用陶管和管配件及管接头.质量控制和抽样 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Quality control and sampling) |
BS EN 295-3-1991 |
排水管和下水道用陶管和管配件及管接头.试验方法 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods) |
BS EN 295-4-1995 |
排水管和下水道用陶管和管配件及管接头.专用配件、管接头和配套附件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories) |
BS EN 295-5-1994 |
排水管和下水道用陶管和管配件及管接头.带孔的陶管及配件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings) |
BS EN 295-6-1996 |
排水管和下水道用陶管和管配件及管接头.硫酸盐粘土入水孔的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes) |
BS EN 295-7-1996 |
排水管和下水道用陶管和管配件及管接头.陶管和管插座接缝的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking) |
BS EN 29519-1991 |
造船和海上建筑物.标准阶梯级 |
(Shipbuilding and marine structures - Rungs for dog-step ladders) |
BS EN 29539-1992 |
用于气焊、切割及类似加工过程设备的材料规范 |
(Specification for materials for equipment used in gas welding, cutting and allied processes) |
BS EN 2955-1993 |
钛和钛合金废料的回收 |
(Recycling of titanium and titanium alloy scrap) |
BS EN 297-1994 |
燃气集中加热锅炉.装配有输入热量不超过70kW的常压燃烧器的B |
(Gas-fired central heating boilers - Type BDOWN1DOWN1 and BDOWN1DOWN1DOWNBDOWNS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW) |
BS EN 29775-1993 |
小船.15KW-40KW功率单外舷电动机远程操纵系统 |
(Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power) |
BS EN 298-2003 |
带或不带风机的燃气炉及燃气装置用自动燃气炉控制系统 |
(Automatic gas burner control systems for gas burners and gas burning appliances with or without fans) |
BS EN 2985-1996 |
A型规格的镍镉电池 |
(Nickel-cadmium batteries of format A type) |
BS EN 2986-1996 |
B型规格的镍镉电池 |
(Nickel-cadmium batteries of format B type) |
BS EN 29865-1993 |
纺织品.用邦迪斯门雨淋试验方法测定织物的防水性 |
(Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test) |
BS EN 2987-1996 |
C型规格的镍镉电池 |
(Nickel-cadmium batteries of format C type) |
BS EN 2988-1996 |
D型规格的镍镉电池 |
(Nickel-cadmium batteries of format D type) |
BS EN 29885-1994 |
广口玻璃容器.顶部密封表面的平面度偏差.试验方法 |
(Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods) |
BS EN 299-1999 |
油压雾化喷嘴.角度和喷射特性的测定 |
(Oil pressure atomizing nozzles - Determination of the angle and spray characteristics) |
BS EN 2991-1996 |
E型规格的镍镉电池 |
(Nickel-cadmium batteries of format E type) |
BS EN 2993-1996 |
F型规格的镍镉电池 |
(Nickel-cadmium batteries of format F type) |
BS EN 29945-1-1991 |
信息技术.便携式操作系统接口(POSIX).系统应用程序接口.C语言 |
Information technology. Portable operating system interface (POSIX). System application program interface (API) [C LANGUAGE] |
BS EN 2997-1-1997 |
连续运行温度为175℃、200℃尖端温度为260℃时耐火或不耐火的由螺纹环连接的循环电连接器.技术规范 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Technical specification) |
BS EN 2997-10-1997 |
连续运行温度为175℃、200℃尖端温度为260℃时耐火或不耐火的由螺纹环连接的循环电连接器.插头保护涂层.产品标准 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Protective cover for plug - Product standard |
BS EN 2997-11-1997 |
连续运行温度为175℃、200℃尖端温度为260℃时耐火或不耐火的由螺纹环连接的循环电连接器.虚拟插座.产品标 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Dummy receptacle - Product) |
BS EN 2997-2-1997 |
连续运行温度为175℃、200℃尖端温度为260℃时耐火或不耐火的由螺纹环连接的循环电连接器.性能规范和触点排 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Specification of performanc) |
BS EN 2997-3-1997 |
连续运行温度为175℃、200℃尖端温度为260℃时耐火或不耐火的由螺纹环连接的循环电连接器.方头法兰插座.产 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Square flange receptacle -) |