标准号 |
中文名称 |
英文名称 |
DIN EN 727-1995 |
塑料管道和防护管系统.热塑管和异型件.维卡软化温度(VST)的测定 |
(Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994) |
DIN EN 728-1997 |
塑料管道系统和保护管系统.聚烯烃制管和管件.氧化感应时间测定 |
(Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997) |
DIN EN 729-1-1994 |
焊接技术质量要求.金属材料熔焊.第1部分:选择和使用规则 |
(Quality requirements for welding - Fusion welding of metallic materials - Part 1: Guidelines for selection and use; German version EN 729-1:1994) |
DIN EN 729-2-1994 |
焊接技术质量要求.金属材料熔焊.第2部分:全面质量要求 |
(Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements; German version EN 729-2:1994) |
DIN EN 729-3-1994 |
焊接技术质量要求.金属材料熔焊.第3部分:标准质量要求 |
(Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standard quality requirements; German version EN 729-3:1994) |
DIN EN 729-4-1994 |
焊接技术质量要求.金属材料溶焊.第4部分:基本质量要求 |
(Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements; German version EN 729-4:1994) |
DIN EN 73-1990 |
木材防腐剂.生物检验前被处理木材的加速老化.蒸发老化过程 |
(Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988) |
DIN EN 730-1-2003 |
气焊设备.安全装置.第1部分:含有回火制止器的安全装置 |
(Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor; German version EN 730-1:2002) |
DIN EN 730-2-2003 |
气焊设备.安全装置.第2部分:不含有回火制止器的安全装置 |
(Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor; German version EN 730-2:2002) |
DIN EN 731-1995 |
气焊设备.吸气式手提吹管.规范和试验 |
(Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests; German version EN 731:1995) |
DIN EN 732-1999 |
液化石油气器具规范.吸收式冰箱 |
(Specification for dedicated liquefied petroleum gas appliances - Absorption refrigerators; German version EN 732:1998) |
DIN EN 733-1995 |
带轴承座和PN10轴向端口的离心泵.额定功率.主要尺寸.标识系统 |
(End-suction centrifugal pumps, rating 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system; German version EN 733:1995) |
DIN EN 734-1995 |
带侧通道泵PN40.额定功率.主要尺寸.标识系统 |
(Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system; German version EN 734:1995) |
DIN EN 735-1995 |
旋转动态泵的总体尺寸.公差 |
(Overall dimensions of rotodynamic pumps - Tolerances; German version EN 735:1995) |
DIN EN 736-1-1995 |
管件.术语.第1部分:基本结构定义 |
(Valves - Terminology - Part 1: Definition of types of valves; German version EN 736-1:1995) |
DIN EN 736-2-1997 |
阀门.术语.第2部分:阀门部件的定义 |
(Valves - Terminology - Part 2: Definition of components of valves; German version EN 736-2:1997) |
DIN EN 736-3-2002 |
阀门.术语.第3部分:术语定义(包括修改件A1) |
(Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); German version EN 736-3:1999 + A1:2001) |
DIN EN 737-1-1998 |
医疗气体用管道系统.第1部分:医疗压缩气体和真空用取样点 |
(Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998) |
DIN EN 737-2-2000 |
医疗气体管道系统.第2部分:麻醉气清除系统.基本要求(包括修改件A1) |
(Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems; basic requirements (includes Amendment A1:1999); German version EN 737-2:1998 + A1:1999) |
DIN EN 737-3-2000 |
医疗气体管道系统.第3部分:医疗压缩气体和真空管道 |
(Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum (includes Amendment A1:1999); German version EN 737-3:1998 + A1:1999) |
DIN EN 737-4-1998 |
医疗气体用管道系统.第4部分:麻醉气体传导系统用取样点 |
(Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems; German version EN 737-4:1998) |
DIN EN 738-1-2002 |
医疗气体用压力调节器.第1部分:压力调节器和带流量测量装置的压力调节器 |
(Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices (includes Amendment A1:2002); German version EN 738-1:1997 + A1:2002) |
DIN EN 738-2-1998 |
医疗气体用压力调节器.第2部分:歧管和管线压力调节器 |
(Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators; German version EN 738-2:1998) |
DIN EN 738-3-2002 |
医疗气体用压力调节器.第3部分:与气瓶阀整合的压力调节器 |
(Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (includes Amendment A1:2001); German version EN 738-3:1998 + A1:2001) |
DIN EN 738-4-2002 |
医疗气体用压力调节器.第4部分:医疗设备中使用的低压调节器(包括修改件A1) |
(Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment (includes Amendment A1:2002); German version EN 738-4:1998 + A1:2002) |
DIN EN 739-2002 |
医疗气体用低压软管组件(包括修改件A1) |
(Low-pressure hose assemblies for use with medical gases (includes Amendment A1:2002); German version EN 739:1998 + A1:2002) |
DIN EN 74-1-2005 |
脚手架和支承架用联结件、中心螺栓和踏板.第1部分:钢管用联结件.要求和试验规程.德文版本 EN 74-1-2005德文版 |
|
DIN EN 74-1988 |
联结件.钢管脚手架和支承架用中心螺栓和踏板.要求.检验 |
(Couplers, loose spigots and base-plates for use in workung scaffolds and falsework made of steel tubes; requirements and test procedures; german version EN 74:1988) |
DIN EN 740-1999 |
麻醉工作场所和它们的模式.特殊规定 |
(Anaesthetic workstations and their modules - Particular requirements (including corrigendum AC:1998); German version EN 740:1998 + AC:1998) |
DIN EN 740/A1-2004 |
麻醉工作台及其组件.特殊要求 |
|
DIN EN 741-2000 |
连续装卸设备和系统.松散材料的气压装卸系统及其部件的安全要求 |
(Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials; German version EN 741:2000) |
DIN EN 742-1994 |
识别卡系统.欧州仪器上用1型识别卡接触位置和安排 |
(Identification card systems; intersector ID-1 card location of contacts for cards and devices used in Europe; German version EN 742:1993) |
DIN EN 743-1994 |
塑料管道和防护管系统.热塑塑料管道.纵向收缩测定 |
(Plastics piping and ducting systems; thermoplastics pipes; determination of the longitudinal reversion; german version EN 743:1994) |
DIN EN 744-1995 |
塑料管道和导管系统.热塑管.耐连续吹风的试验方法 |
(Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995) |
DIN EN 745-1999 |
农业机械.旋转式割草机构和甩刀式割草机.安全性 |
(Agricultural machinery - Rotary mowers and flail mowers - Safety; German version EN 745:1999) |
DIN EN 746-1-1997 |
工业热加工工艺设备.第1部分:工业热加工工艺设备的一般安全要求 |
(Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment; German version EN 746-1:1997) |
DIN EN 746-2-1997 |
工业热加工工艺设备.第2部分:燃烧和燃料储运系统的安全要求 |
(Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German version EN 746-2:1997) |
DIN EN 746-3-1997 |
工业热加工工艺设备.第3部分:保护气体和反应气体的生产和使用的安全要求 |
(Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmospheres gases; German version EN 746-3:1997) |
DIN EN 746-4-2000 |
工业热加工设备.第4部分:热浸电镀热加工设备的特殊安全要求 |
(Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; German version EN 746-4:1999) |
DIN EN 746-5-2001 |
工业热处理设备.第5部分:盐浴热处理设备的特殊安全要求 |
(Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; German version EN 746-5:2000) |
DIN EN 746-8-2001 |
工业热处理设备.第8部分:淬火设备的特殊安全要求 |
(Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; German version EN 746-8:2000) |
DIN EN 747-1-1993 |
家具.卧室用双层床.第1部分:安全性要求 |
(Furniture; bunk beds for domestic use; part 1: safety requirements; German version EN 747-1:1993) |
DIN EN 747-2-1993 |
家具.卧室用双层床.第2部分:检验方法 |
(Furniture; bunk beds for domestic use; part 2: test methods; German version EN 747-2:1993) |
DIN EN 748-1999 |
运动场地器材.足球门.功能和安全技术要求,检验方法(包括修改件1:1998) |
(Playing field equipment - Football goals - Functional and safety requirements, test methods (including amendment 1:1998); German version EN 748:1995 + A1:1998) |
DIN EN 748-2004 |
运动场地器材.足球门.功能和安全技术要求及试验方法 |
|
DIN EN 748-2004 |
运动场地器材.足球门.功能和安全技术要求及试验方法 |
|
DIN EN 749-1999 |
运动场地器材.手球门.功能和安全技术要求,检验方法(包括修改件1:1998) |
(Playing field equipment - Handball goals - Functional and safety requirements, test methods (including amendment 1:1998); German version EN 749:1995 + A1:1998) |
DIN EN 749-2004 |
运动场地器材.手球门.功能和安全技术要求及试验方法 |
|
DIN EN 750-1999 |
运动场地器材.曲棍球门.功能和安全技术要求,检验方法(包括修改件1:1998) |
(Playing field equipment - Hockey goals - Functional and safety requirements, test methods (including amendment 1:1998); German version EN 750:1995 + A1:1998) |
DIN EN 750-2004 |
运动场地器材.曲棍球门.功能和安全技术要求及试验方法 |
|
DIN EN 751-1-1997 |
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第1部分:厌氧密封材料 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds; German version EN 751-1:1996 |
DIN EN 751-2-1997 |
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料 |
(Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996) |
DIN EN 751-3-1997 |
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第3部分:非烧结的PTFE带材 |
(Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes; German version EN 751-3:1996) |
DIN EN 752 Bb.1-1999 |
建筑物外的污水排放系统.索引 |
(Drain and sewer systems outside buildings - Index) |
DIN EN 752-1-1996 |
建筑物外部排水系统.第1部分:概述和定义 |
(Drain and sewer systems outside buildings - Part 1: Generalities and definitions; German version EN 752-1:1995) |
DIN EN 752-2-1996 |
建筑物外部排水系统.第2部分:要求 |
(Drain and sewer systems outside buildings - Part 2: Performance requirements; German version EN 752-2:1996) |
DIN EN 752-3-1996 |
建筑物外部排水系统.第3部分:规划 |
(Drain and sewer systems outside buildings - Part 3: Planning; German version EN 752-3:1996) |
DIN EN 752-4-1997 |
建筑物外部排水系统.第4部分:液压计算和对环境保护的考虑 |
(Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations; German version EN 752-4:1997) |
DIN EN 752-5-1997 |
建筑物外部排水系统.第5部分:整理复原 |
(Drain and sewer systems outside buildings - Part 5: Rehabilitation; German version EN 752-5:1997) |
DIN EN 752-6-1998 |
建筑物外部排水系统.第6部分:泵设备 |
(Drain and sewer systems outside buildings - Part 6: Pumping installations; German version EN 752-6:1998) |
DIN EN 752-7-1998 |
建筑物外部排水系统.第7部分:操作和维护 |
(Drain and sewer systems outside buildings - Part 7: Maintenance and operations; German version EN 752-7:1998) |
DIN EN 753-1-1998 |
识别卡系统.部门间重叠的薄型易弯曲卡.第1部分:一般技术规范 |
(Identification card systems - Intersector thin flexible cards - Part 1: General technical specifications; German version EN 753-1:1997) |
DIN EN 753-2-1998 |
识别卡系统.部门间重叠的薄型易弯曲卡.第2部分:磁录制技术 |
Identification card systems - Intersector thin flexible cards - Part 2: Magnetic recording technique; German version EN 753-2:1997 |
DIN EN 753-3-2000 |
识别卡系统.部门间薄型易弯曲卡.第3部分:德文版本EN753-3:1999 |
Identification card systems - Intersector thin flexible cards - Part 3: Test methods; German version EN 753-3:1999 |
DIN EN 754-1-1997 |
铝和铝合金.冷拉棒和管.第1部分:交货技术条件 |
(Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery; German version EN 754-1:1997) |
DIN EN 754-2-1997 |
铝和铝合金.冷拉棒和管.第2部分:机械性能 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties; German version EN 754-2:1997 |
DIN EN 754-3-1996 |
铝和铝合金.冷拉棒和管.第3部分:圆棒材.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form; German version EN 754-3:1995 |
DIN EN 754-4-1996 |
铝和铝合金.冷拉棒和管.第4部分:方形棒材.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form; German version EN 754-4:1995 |
DIN EN 754-5-1996 |
铝和铝合金.冷拉棒和管.第4部分:矩形棒材.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form; German version EN 754-5:1995 |
DIN EN 754-6-1996 |
铝和铝合金.冷拉棒和管.第4部分:六角形棒材.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars; tolerances on dimensions and form; German version EN 754-6:1995 |
DIN EN 754-7-1998 |
铝和铝合金.冷拉棒和管.第7部分:无缝管.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 754-7:1998 |
DIN EN 754-8-1998 |
铝和铝合金.冷拉棒和管.第8部分:带连续压制小口的管.极限尺寸和形状 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 754-8:1998 |
DIN EN 755-1-1997 |
铝和铝合金.挤压棒材/管材和型材.第1部分:交货技术条件 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery; German version EN 755-1:1997 |
DIN EN 755-2-1997 |
铝和铝合金.挤压竿材/棒材、管材和型材.第2部分:机械性能 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties; German version EN 755-2:1997 |
DIN EN 755-3-1995 |
铝和铝合金.挤压竿材/棒材、管材和型材.第3部分:圆形棒材.尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profile - Part 3: Round bars; tolerances on dimensions and form; German version EN 755-3:1995 |
DIN EN 755-4-1995 |
铝和铝合金.挤压竿材/棒材、管材和型材.第4部分:方形棒材.尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form; German version EN 755-4:1995 |
DIN EN 755-5-1995 |
铝和铝合金.挤压竿材/棒材、管材和型材.第5部分:矩形棒材.尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form; German version EN 755-5:1995) |
DIN EN 755-6-1995 |
铝和铝合金.挤压竿材/棒材、管材和型材.第6部分;六角形棒材.尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form; German version EN 755-6:1995) |
DIN EN 755-7-1998 |
铝和铝合金.挤压棒材/管材和型材.第7部分:无缝管.极限尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; German version EN 755-7:1998 |
DIN EN 755-8-1998 |
铝和铝合金.挤压棒材/管材和型材.第8部分:带连续压制小口的管.极限尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 755-8:1998) |
DIN EN 755-9-2001 |
铝和铝合金.挤压棒材/管材和型材.第9部分:截面图、尺寸和形状公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; German version EN 755-9:2001) |
DIN EN 756-1995 |
焊料.非合金钢和细粒钢埋弧焊用焊丝和焊丝-焊剂混合物.分类 |
(Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification; German version EN 756:1995) |
DIN EN 756-2004 |
焊接消耗品.非合金钢和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类 |
|
DIN EN 757-1997 |
焊接添加剂.高强钢手动电弧焊用带涂药包皮的焊条.分类 |
(Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification; German version EN 757:1997) |
DIN EN 758-1997 |
焊接材料.用和不用非合金钢以及细晶粒钢保护气体的金属电弧焊用管状焊条.分类 |
(Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification; German version EN 758:1997) |
DIN EN 759-1997 |
焊条.焊条的技术交货条件.产品种类.尺寸.极限公差和标识 |
(Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking; German version EN 759:1997) |
DIN EN 76-1979 |
某些食品成品包装用包装材料.玻璃和金属包装材料的容积 |
(Packages for certain prepacked foodstuffs; capacities of glass and metal containers) |
DIN EN 760-1996 |
焊料.埋弧焊用焊剂.分类 |
(Welding consumables - Fluxes for submerged arc welding - Classification; German version EN 760:1996) |
DIN EN 761-1994 |
塑料管道系统.玻璃增强热固性管子.干燥条件蠕变系数的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994) |
DIN EN 763-1994 |
塑料.管道.防护管系统.喷铸.热塑异型件.视觉判定热效应的检验方法 |
(Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating; German version EN 763:1994) |
DIN EN 764-1-2004 |
压力设备.第1部分:术语.压力、温度、容积和标称尺寸 |
|
DIN EN 764-1994 |
压力设备.术语和符号.压力,温度和容积 |
(Pressure equipment - Terminology and symbols - Pressure, temperature, volume; German version EN 764:1994) |
DIN EN 764-2-2002 |
压力设备.第2部分:数量,符号和单位 |
(Pressure equipment - Part 2: Quantities, symbols and units; German version EN 764-2:2002) |
DIN EN 764-3-2002 |
压力设备.第3部分:对有关方的定义 |
(Pressure equipment - Part 3: Definition of parties involved; German version EN 764-3:2002) |
DIN EN 764-4-2003 |
压力设备.金属材料的技术交货条件的确立 |
(Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials; German version EN 764-4:2002) |
DIN EN 764-5-2003 |
压力设备.第5部分:金属材料的检验文件及其依据的材料规范 |
(Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002) |
DIN EN 764-7-2002 |
压力设备.第3部分:不用火加热的压力设备的安全系统 |
(Pressure equipment - Part 7: Safety systems for unfired pressure equipment; German version EN 764-7:2002) |
DIN EN 765-1994 |
食品运输用袋.聚炳烯之外的其它聚烯烃编织物袋 |
(Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only; German version EN 765:1994) |
DIN EN 766-1994 |
食品运输袋.黄麻织物袋 |
(Sacks for the transport of food aid - Sacks made of jute fabric; German version EN 766:1994) |
DIN EN 767-1994 |
食品运输袋.黄麻聚烯烃混合织物袋 |
(Sacks for the transport of food aid - Sacks made of woven jute/polyolefine fabric; German version EN 767:1994) |
DIN EN 768-1994 |
食品运输袋.带内袋的棉织袋 |
(Sacks for the transport of food aid - Sacks made of lined cotton fabric; German version EN 768:1994) |
DIN EN 769-1994 |
食品运输袋.棉和聚烯烃混合织物袋 |
(Sacks for the transport of food aid - Sacks made of woven cotton/polyolefine fabric; German version EN 769:1994) |
DIN EN 770-1994 |
食品运输袋.纸袋 |
(Sacks for the transport of food aid - Paper sacks; German version EN 770:1994) |
DIN EN 771-1-2003 |
砌块规范.第1部分:粘土砌块 |
(Specification for masonry units - Part 1: Clay masonry units; German version EN 771-1:2003) |
DIN EN 771-1-2005 |
圬工单位规范.第1部分:黏土圬工单位 |
|
DIN EN 771-1-2005 |
圬工单位规范.第1部分:黏土圬工单位 |
|
DIN EN 771-1-2005 |
圬工单位规范.第1部分:黏土圬工单位 |
|
DIN EN 771-2-2000 |
圬工单位规范.第2部分:硅酸钙圬工单位 |
(Specification for masonry units - Part 2: Calcium silicate masonry units; German version EN 771-2:2000) |
DIN EN 771-2-2003 |
砌体砌筑单规范.第2部分:硅酸盐砌体砌筑单 |
(Specification for masonry units - Part 2: Calcium silicate masonry units; German version EN 771-2:2003) |
DIN EN 771-2-2005 |
圬工单位规范.第2部分:硅酸钙圬工单位 |
|
DIN EN 771-2-2005 |
圬工单位规范.第2部分:硅酸钙圬工单位 |
|
DIN EN 771-2-2005 |
圬工单位规范.第2部分:硅酸钙圬工单位 |
|
DIN EN 771-3-2004 |
圬工砌筑单位规范.第3部分:集料混凝土圬工砌筑单位(密实和轻质集料) |
(Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates); German version EN 771-3:2003) |
DIN EN 771-3-2004 |
圬工砌筑单位规范.第3部分:集料混凝土圬工砌筑单位(密实和轻质集料) |
|
DIN EN 771-3-2005 |
圬工单位规范.第3部分:集料混凝土圬工单位(密实和轻质集料) |
|
DIN EN 771-3-2005 |
圬工单位规范.第3部分:集料混凝土圬工单位(密实和轻质集料) |
|
DIN EN 771-3-2005 |
圬工单位规范.第3部分:集料混凝土圬工单位(密实和轻质集料) |
|
DIN EN 771-4-2000 |
圬工单位规范.第4部分:高压蒸氧加气混凝土圬工单位 |
(Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units; German version EN 771-4:2000) |
DIN EN 771-4-2005 |
圬工单位规范.第4部分:高压蒸氧加气混凝土圬工单位 |
|
DIN EN 771-4-2005 |
圬工单位规范.第4部分:高压蒸氧加气混凝土圬工单位 |
|