标准号 |
中文名称 |
英文名称 |
DIN EN 1965-1-2001 |
结构胶粘剂.腐蚀性.对铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate; German version EN 1965-1:2001) |
DIN EN 1965-2-2001 |
结构胶粘剂.腐蚀性.对黄铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate; German version EN 1965-2:2001) |
DIN EN 196500-1993 |
分规范.含空白详细规范的薄膜式开关 |
(Sectional specification: membrane switches including blank detail specification EN 196501; German version EN 196500:1993) |
DIN EN 196500/A1-2002 |
分规范.包括空白详细规范的薄膜开关 |
(Sectional specification: Membrane switches including blank detail specification EN 196501; Amendment A1; German version EN 196500/A1:2001) |
DIN EN 1966-2003 |
结构胶粘剂.用三点弯曲法通过测量粘着性测定表面特性 |
(Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2002) |
DIN EN 1967 Berichtigung 1-2004 |
对DIN EN 1967-2003的勘误 |
|
DIN EN 1967-2003 |
结构胶粘剂.用与导向托辊试验法有关的湿剥离试验评价铝表面处理技术的有效性 |
(Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method; German version EN 1967:2002) |
DIN EN 1968-2002 |
可运输储气瓶.无缝钢储气瓶的周期性检验和测试 |
(Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders; German version EN 1968:2002) |
DIN EN 1968-2005 |
移动式储气瓶.无缝钢储气瓶的周期性检验和试验 |
|
DIN EN 1969-2000 |
运动场表面.合成运动场表面厚度的测定 |
(Surfaces for sports areas - Determination of thickness of synthetic sports surfaces; German version EN 1969:2000) |
DIN EN 197-1 Berichtigung 1-2004 |
对DIN EN 197-1-2004的勘误 |
|
DIN EN 197-1-2001 |
水泥.第1部分:普通水泥的组分、规范和合格标准 |
(Cement - Part 1: Composition, specifications and conformity criteria of common cements; German version EN 197-1:2000) |
DIN EN 197-1-2004 |
水泥.第1部分:普通水泥的组分、规范和合格标准 |
|
DIN EN 197-2-2000 |
水泥.第2部分:合格评定 |
(Cement - Part 2: Conformity evaluation; German version EN 197-2:2000) |
DIN EN 197-4-2004 |
水泥.第4部分:低早硬强度高炉水泥的组分、规范和合格标准 |
|
DIN EN 1970-2000 |
残疾人用可调整的床.要求和试验方法 |
(Adjustable beds for disabled persons - Requirements and test methods; German version EN 1970:2000) |
DIN EN 1970-2005 |
残疾人用可调整床.要求和试验方法 |
|
DIN EN 1971-1998 |
铜和铜合金.管道上的涡流检验 |
(Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998) |
DIN EN 1972-1997 |
潜水附件.潜水服进气管.安全性技术要求和检验方法 |
(Diving accessories - Snorkel - Safety requirements and test methods; German version EN 1972:1997) |
DIN EN 1974-1999 |
食品加工机械.切片机.安全要求和卫生要求 |
(Food processing machinery - Slicing machines - Safety and hygiene requirements; German version EN 1974:1998) |
DIN EN 1975-1999 |
移动式气瓶.容量从0,5立升至150立升(含150立升)的铝和铝合金制可重复装填便携式无缝气瓶的设计和结构的规范 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium alloy gas cylinders of capacity from 0,5 l up to 150 l; German version EN 1975:1999) |
DIN EN 1975-2004 |
移动式气瓶.容量从0.5升至150升的铝和铝合金制可再填充便携式无缝气瓶的设计和构造规范 |
|
DIN EN 1976-1998 |
铜和铜合金.铸铜管材 |
(Copper and copper alloys - Cast unwrought copper products; German version EN 1976:1998) |
DIN EN 1977-1998 |
铜和铜合金.铜线材 |
(Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:1998) |
DIN EN 1978-1998 |
铜和铜合金.铜阴极 |
(Copper and copper alloys - Copper cathodes; German version EN 1978:1998) |
DIN EN 1979-1999 |
塑料管道系统和保护管系统.带成型壁的热塑螺旋管.接缝抗拉强度的测定 |
(Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999) |
DIN EN 198-1988 |
丙烯酸材料制家用浴缸的详细规范 |
(Specification for finished baths for domestic purposes made of acrylic material; german version EN 198:1987) |
DIN EN 1981-2003 |
铜及铜合金.母合金 |
(Copper and copper alloys - Master alloys; German version EN 1981:2003) |
DIN EN 1982-1998 |
铜和铜合金.金属块和铸件 |
(Copper and copper alloys - Ingots and castings; German version EN 1982:1998) |
DIN EN 1984-2000 |
工业阀门.钢门阀门 |
(Industrial valves - Steel gate valves; German version EN 1984:2000) |
DIN EN 1985-1999 |
助步器.一般要求和检验方法 |
(Walking aids - General requirements and test methods; German version EN 1985:1998) |
DIN EN 1986-1-1997 |
电动道路车辆.能量消耗的测量方法.第1部分:纯电动车辆 |
(Electrically propelled road vehicles - Measurement of energy performances - Part 1: Pure electric vehicles; German version EN 1986-1:1997) |
DIN EN 1986-2-2003 |
电动道路车辆.能量性能的测量.第2部分:热电混合车辆 |
(Electrically propelled road vehicles - Measurement of energy performance - Part 2: ThermaL electric hybrid vehicles; German version EN 1986-2:2001) |
DIN EN 1987-1-1998 |
电动道路车辆.安全性的特殊规定.第1部分:车辆蓄能器 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage; German version EN 1987-1:1997) |
DIN EN 1987-2-1998 |
电动道路车辆.安全性的特殊规定.第2部分:功能安全装置和防错 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 2: Functional safety means and protection against failure; German version EN 1987-2:1997) |
DIN EN 1987-3-2000 |
电动道路车辆.安全性的特殊规定.第3部分:乘客的电危害防护 |
(Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards; German version EN 1987-3:1998) |
DIN EN 1988-1-1998 |
食品.亚硫酸盐的测定.第1部分:优化的莫尼-威廉法(Monier-Williams) |
(Foodstuffs - Determination of sulfite - Part 1: Optimized Monier-Williams method; German version EN 1988-1:1998) |
DIN EN 1988-2-1998 |
食品.亚硫酸盐的测定.第2部分:酶催化法 |
(Foodstuffs - Determination of sulfite - Part 2: Enzymatic method; German version EN 1988-2:1998) |
DIN EN 1989-2000 |
热塑性管道系统.地下常压排污设施用接头.密封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性能 |
(Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure; German version EN 1989:2000) |
DIN EN 1990-2002 |
欧洲法规:结构设计基础 |
(Eurocode: Basis of structural design; German version EN 1990:2002) |
DIN EN 1991-1-1-2002 |
欧洲法规1:对结构的作用.第1-1部分:一般作用.建筑物的比重、固有负荷和有效负荷 |
(Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings; German version EN 1991-1-1:2002) |
DIN EN 1991-1-3-2004 |
欧洲法规1.对结构物的作用.第1-3部分:一般作用.雪荷载 |
|
DIN EN 1991-1-4-2005 |
欧洲法规1:对结构物的作用.第1-4部分:一般作用.风作用 |
|
DIN EN 1991-1-5-2004 |
欧洲法规1:对结构物的作用.第1-5部分:一般作用.热作用 |
|
DIN EN 1991-2-2004 |
欧洲法规1:对结构的作用.第2部分:桥上交通负载 |
|
DIN EN 1992-1-1-2005 |
欧洲法规2.混凝土结构设计.第1-1部分:一般规则和建筑规则 |
|
DIN EN 1993-1-1-2005 |
欧洲法规3:钢结构的设计.第1-1部分:一般规则和建筑物规则 |
|
DIN EN 1993-1-10-2005 |
欧洲法规3:钢结构的设计.第1-10部分:材料硬度和贯穿厚度特性 |
|
DIN EN 1993-1-8-2005 |
欧洲法规3:钢结构的设计.第1-8部分:接头的设计 |
|
DIN EN 1993-1-9-2005 |
欧洲法规3:钢结构的设计.第1-9部分:疲劳 |
|
DIN EN 1995-1-1-2005 |
欧洲法规 5:木材结构设计.第1-1部分:总则.一般原则和建筑原则.德文版本 EN 1995-1-1-2004 |
|
DIN EN 1997-1-2005 |
欧洲法规7:土木技术设计.第1部分:总则 |
|
DIN EN 2-1993 |
火灾分级 |
(Classification of fires; german version EN 2:1992) |
DIN EN 2-2005 |
火灾分级 |
|
DIN EN 20-1-1992 |
木材防腐剂.对红褐色蛀虫(斯蒂芬)预防作用的测定.第1部分:表面处理(试验室法) |
(Wood preservatives; determination of the effectiveness against Lyctus brunneus (Stephens); part 1: application by surface treatment (laboratory method); german version EN 20-1:1992) |
DIN EN 20-2-1993 |
木材防腐剂.对竹粉囊虫(LY-Cuts)预防作用的测定.第2部分:全浸入法(实验室法) |
(Wood preservatives; determination of the protective effectiveness against Lyctus brunneus (Stephens); part 2: application by impregnation (laboratory method); German version EN 20-2:1993) |
DIN EN 200-1990 |
卫生设备管件.排放阀和混合阀的一般技术要求(公称尺寸1/2PN10.最低水压0.25MPa(0.5巴) |
(Sanitary taps; general technical specifications for single taps and mixer taps (nominal size 1/2) PN 10; minimum flow pressure of 0,05 MPa (0,5 bar); german version EN 200:1989) |
DIN EN 200-2005 |
卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 |
|
DIN EN 200-2005 |
卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 |
|
DIN EN 200-2005 |
卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 |
|
DIN EN 2000-1992 |
航空和航天.质量保证.航空航天业的EN产品.生产厂家质量保证体系的批准 |
(Aerospace series; quality assurance, EN aerospace products, approval of the quality system of manufacturers; german version EN 2000:1991) |
DIN EN 2004-1-1993 |
航空和航天.铝合铝合金制品的检验方法.锻铝合金导电率的测定 |
(Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys; German version EN 2004-1:1993) |
DIN EN 2004-5-1993 |
航空和航天.铝和铝合金制品的检验方法.电镀半成品时测定镀层厚度和铜渗滤 |
(Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993) |
DIN EN 2009-1995 |
航空和航天.航空轴承.单列钢制凹槽球轴承.直径系列8和9.尺寸负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2009:1984) |
DIN EN 201-1997 |
橡胶机械和塑料机械.喷射造型机.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997) |
DIN EN 201/A1-2000 |
橡胶机械和塑料机械.注射成型机.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997/A1:2000) |
DIN EN 201/A2-2005 |
塑料和橡胶机械.注模机.安全性要求 |
|
DIN EN 20105-A02-1994 |
纺织品.色牢度试验.第A02部分:颜色变化评定用灰度标 |
(Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993); German version EN 20105-A02:1994) |
DIN EN 20105-A03-1994 |
纺织品.色牢度试验.第A03部分:沾污评定的灰度标 |
(Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993); German version EN 20105-A03:1994) |
DIN EN 20105-C01-1993 |
纺织品.色牢度试验.第C01部分:耐洗涤色牢度:试验1 |
(Textiles; tests for colour fastness; part C01: colour fastness to washing; test 1 (ISO 105-C01:1989); german version EN 20105-C01:1992) |
DIN EN 20105-C02-1993 |
纺织品.色牢度试验.第C02部分:耐洗涤色牢度:试验2 |
(Textiles; tests for colour fastness; part C02: colour fastness to washing; test 2 (ISO 105-C02:1989); german version EN 20105-C02:1992) |
DIN EN 20105-C03-1993 |
纺织品.色牢度试验.第C03部分:耐洗涤色牢度:试验3 |
(Textiles; tests for colour fastness; part C03: colour fastness to washing; test 3 (ISO 105-C03:1989); german version EN 20105-C03:1992) |
DIN EN 20105-C04-1993 |
纺织品.色牢度试验.第C04部分:耐洗涤色牢度:试验4 |
(Textiles; tests for colour fastness; part C04: colour fastness to washing; test 4 (ISO 105-C04:1989); german version EN 20105-C04:1992) |
DIN EN 20105-C05-1993 |
纺织品.色牢度试验.第C05部分:耐洗涤色牢度:试验5 |
(Textiles; tests for colour fastness; part C05: colour fastness to washing; test 5 (ISO 105-C05:1989); german version EN 20105-C05:1992) |
DIN EN 20105-N01-1995 |
纺织品.色牢度试验.第N01部分:耐褪色的色牢度.次氯酸盐试验方法 |
(Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite (ISO 105-N01:1993); German version EN 20105-N01:1995) |
DIN EN 2011-1995 |
航空和航天.航空轴承.单列不锈钢凹槽球轴承.直径系列8和9.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2011:1984) |
DIN EN 2012-1995 |
航空和航天.航空轴承.单列钢制凹槽球轴承.直径系列0和2.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984) |
DIN EN 20139-1992 |
纺织品.湿度调节和检验的标准大气 |
(Textiles; standard atmospheres for conditioning and testing (ISO 139:1973); german version EN 20139:1992) |
DIN EN 2014-1995 |
航空和航天.航空轴承.单列不锈钢制单列凹槽球轴承.直径系列0和2.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2014:1984) |
DIN EN 20140-10-1992 |
声学.建筑物和构件隔音性能测量.试验台上小型构件的气载声隔离性能测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements; German version EN 20140-10:1992) |
DIN EN 20140-2-1993 |
声学.建筑物和建筑物构件内的隔音测量.第2部分:精度要求数据 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data (ISO 140-2:1991); German version EN 20140-2:1993) |
DIN EN 20140-3-1995 |
声学.建筑物和建筑物构件内的隔音测量.第3部分:建筑物构件的气载音响隔离的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995); German version EN 20140-3:1995) |
DIN EN 20140-9-1993 |
声学.建筑物和建筑单内的隔音测量.第9部分:上有压力通风悬吊式天花板装置的房间之间空气隔音的实验室测量 |
(Acoustics; measurement of sound insulation in buildings and of building elements; Part 9: laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985); German version EN 20140-9:1993) |
DIN EN 2015-1995 |
航空和航天.航空轴承.双列钢制球面球轴承.直径系列2.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984) |
DIN EN 2017-1995 |
航空和航天.航空轴承.双列不锈钢制球面球轴承.直径系列2.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017:1984) |
DIN EN 2018-1995 |
航空和航天.航空轴承.单列钢制球面轴承.直径系列3和4.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984) |
DIN EN 20187-1993 |
纸、纸板和纸浆.调节和检验用的标准环境气候条件及监测气候条件和调节试样的方法 |
(Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993) |
DIN EN 2020-1995 |
航空和航天.航空轴承.单列耐蚀钢制球面轴承.直径系列3和4.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984) |
DIN EN 2022-1989 |
航空和航天.本身带润滑层的不锈钢滑动轴承.轻系列.尺寸和负荷 |
(Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads) |
DIN EN 20225-1992 |
紧固件.螺钉和螺母.标注尺寸(ISO225-83) |
(Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensions (ISO 225:1983); german version EN 20225:1991) |
DIN EN 2023-1989 |
航空和航天.本身带润滑层的不锈钢滑动轴承.常规系列.尺寸和负荷 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads) |
DIN EN 20273-1992 |
紧固件.螺钉用通孔(ISO273-79) |
(Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991) |
DIN EN 20284-1993 |
输送机皮带.电导率.规范和试验方法 |
(Conveyor belts; electrical conductivity; specification and method of test (ISO 284:1982); German version EN 20284:1993) |
DIN EN 20287-1994 |
纸和纸板.水份含量的测定.烘干法 |
(Paper and board - Determination of moisture content - Oven-drying method (ISO 287:1985); German version EN 20287:1994) |
DIN EN 203-1-1996 |
大型燃气炊事用具.第1部分:安全性的一般规定 |
(Gas heated catering equipment - Part 1: Safety requirements (includes Amendment A1:1995); German version EN 203-1:1992 + A1:1995) |
DIN EN 203-1-2005 |
气体加热的给养设备.第1部分:一般安全规范 |
|
DIN EN 203-1/A2-1999 |
大型燃气炊事用具.第1部分:安全性要求.修改件A2 |
(Gas heated catering equipment - Part 1: Safety requirements; Amendment A2; German version EN 203-1:1992/A2:1999) |
DIN EN 203-2-1995 |
用气体燃料的大型厨房器具.第2部分:合理使用能源 |
(Gas heated catering equipment - Part 2: Rational use of energy; German version EN 203-2:1995) |
DIN EN 2032-1-2003 |
航空航天系列.金属材料.第1部分:常规命称与符号 |
(Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001) |
DIN EN 2032-2-1994 |
航空和航天.金属材料.第2部分:供货状态下经热处理的标记字母 |
(Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994) |
DIN EN 20340-1993 |
阻燃输送机皮带.要求和试验方法 |
(Conveyor belts; flame retardation; specifications and test method (ISO 340:1988); German version EN 20340:1993) |
DIN EN 20354-1993 |
声学.混响室中声音的吸收测量 |
(Acoustics; measurement of sound absorption in a reverberation room (ISO 354:1985); German version EN 20354:1993) |
DIN EN 20354/A1-1997 |
声学.混响室中声音的吸收测量.修订件1:声音吸收试验用试样安装 |
(Acoustics - Measurement of sound absorption in a reverberation room; Amendment A1: Test specimen mountings for sound absorption tests (ISO 354:1985/AMD 1:1997); German version EN 20354/A1:1997) |
DIN EN 204-2001 |
非承重构件粘接热塑木胶粘剂的分类.德文版本EN204-2001 |
(Classification of thermoplastic wood adhesives for non-structural applications; German version EN 204:2001) |
DIN EN 2044-2003 |
航空航天系列.公差等级h11、直径4mmD63mm的铝及铝合金拉制圆棒材.尺寸 |
(Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001) |
DIN EN 2045-2003 |
航空航天系列.公差等级h11、厚度6mma50mm的铝及铝合金拉制方棒.尺寸 |
(Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001) |
DIN EN 2046-2003 |
航空航天系列.公差等级h11.对边宽度7mma50mm的铝及铝合金拉制六角形棒材.尺寸 |
(Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001) |
DIN EN 205-2003 |
胶粘剂.非结构上用木材胶粘剂.搭接接头的抗拉伸剪切强度的测定 |
(Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2003) |
DIN EN 20534-1993 |
纸和纸板.厚度和表观松密度或表观板密度的测定 |
(Paper and board; determination of thickness and apparent bulk density or apparent sheet density (ISO 534:1988); German version EN 20534:1993) |
DIN EN 20535-1994 |
纸和纸板.水吸收性测定.Cobb法 |
(Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991); German version EN 20535:1994) |
DIN EN 20594-1 Berichtigung 1-1996 |
对DINEN20594-1:1995-01的校正 |
(Corrigenda to DIN EN 20594-1:1995-01 (EN 20594-1:1993/AC:1996)) |
DIN EN 20594-1-1995 |
注射器、针头和某些其它医用设备的有6%锥度的锥形配件.第1部分:一般要求 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986); German version EN 20594-1:1993) |
DIN EN 206-1-2001 |
混凝土.第1部分:规范,性能,生产和一致性 |
(Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000) |
DIN EN 206-1/A1-2004 |
混凝土.第1部分:规范、性能、生产及合格性 |
|
DIN EN 2063-1995 |
航空和航天.飞机机身用的滚动轴承.交货技术条件.不适于新结构 |
(Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992) |
DIN EN 20638-1993 |
纸浆.干物质含量的测定 |
(Pulps; determination of dry matter content (ISO 638:1978); German version EN 20638:1993) |
DIN EN 2064-1992 |
航空和航天.带自动润滑层的不锈钢关节轴承.交货技术条件 |
(Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992) |
DIN EN 2066-2003 |
航空航天系列.铝合金挤压型材.一般公差 |
(Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001) |
DIN EN 2067-1996 |
航空和航天.带自动调心球轴承的吊环端头.交货技术条件 |
(Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996) |
DIN EN 2068-1996 |
航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件 |
(Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996) |