标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 3251-1995 |
色漆和清漆.色漆、清漆和色漆-清漆粘合剂中非挥发物质的测定 |
Paint and varnishes - Determination of the non-volatile matter of paints, varnishes and binders for paints and varnishes (ISO 3251:1993); German version EN ISO 3251:1995 |
| DIN EN ISO 3251-2003 |
色漆、清漆和塑料.非挥发物质含量的测定 |
(Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003); German version EN ISO 3251:2003) |
| DIN EN ISO 3252-2001 |
粉末冶金.词汇 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
| DIN EN ISO 3262-1-1998 |
涂料用填充剂.要求和检验方法.第1部分:导言和一般检验方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997); German version EN ISO 3262-1:1998 |
| DIN EN ISO 3262-10-2001 |
涂料用填充剂.规范和试验方法.第10部分:片状天然滑石/亚氯酸盐 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000); German version EN ISO 3262-10:2000 |
| DIN EN ISO 3262-11-2001 |
涂料用填充剂.规范和试验方法.第11部分:含碳酸盐的片状天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000); German version EN ISO 3262-11:2000 |
| DIN EN ISO 3262-12-2002 |
涂料用填充剂.规范和试验方法.第12部分:白云母类云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001); German version EN ISO 3262-12:2001 |
| DIN EN ISO 3262-13-1998 |
涂料用填充料.要求和检验方法.第13部分:天然石英(已磨碎) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998 |
| DIN EN ISO 3262-14-2000 |
涂料用填充剂.试验规范和试验方法.第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 |
| DIN EN ISO 3262-15-2000 |
涂料用填充剂.试验规范和试验方法.第15部分:石英玻璃 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000 |
| DIN EN ISO 3262-16-2000 |
涂料用填充剂.规范和试验方法.第16部分:氢氧化铝 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); German version EN ISO 3262-16:2000 |
| DIN EN ISO 3262-17-2000 |
涂料用填充剂.规范和试验方法.第17部分:沉淀硅酸钙 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000); German version EN ISO 3262-17:2000 |
| DIN EN ISO 3262-18-2000 |
涂料用填充剂.规范和试验方法.第18部分:沉淀硅铝酸钠 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); German version EN ISO 3262-18:2000 |
| DIN EN ISO 3262-19-2000 |
涂料用填充剂.规范和试验方法.第19部分:沉淀石英 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和检验方法.第2部分:重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和检验方法.第2部分:重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-20-2000 |
涂料用填充剂.规范和试验方法.第20部分:烟化石英 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 |
| DIN EN ISO 3262-21-2000 |
涂料用填充剂.规范和试验方法.第21部分:石英砂(地下天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 |
| DIN EN ISO 3262-22-2002 |
涂料用填充剂.规范和试验方法.第22部分:热碱处理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262:2001); German version EN ISO 3262-22:2001 |
| DIN EN ISO 3262-4-1998 |
涂料用填料.要求和检验方法.第4部分:粉化 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 |
| DIN EN ISO 3262-5-1998 |
涂料用填料.要求和检验方法.第5部分:天然结晶碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998); German version EN ISO 3262-5:1998 |
| DIN EN ISO 3262-6-1998 |
涂料用填料.要求和检验方法.第6部分:沉淀的碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998); German version EN ISO 3262-6:1998 |
| DIN EN ISO 3262-7-1998 |
涂料用填料.要求和检验方法.第7部分:白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998); German version EN ISO 3262-7:1998 |
| DIN EN ISO 3262-8-1999 |
涂料用填充剂.试验方法规范.第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 |
| DIN EN ISO 3262-9-1998 |
涂料用填充料.要求和检验方法.第9部分:煅烧的高岭土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997); German version EN ISO 3262-9:1998 |
| DIN EN ISO 3269-2000 |
紧固件.验收检查 |
Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 |
| DIN EN ISO 3274-1998 |
几何产品规范(GPS).织物表面:轮廓法.接触尖笔式记录仪的一般特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997 |
| DIN EN ISO 3325-2002 |
包括硬性金属的烧结金属材料.测定横向断裂强度 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002 |
| DIN EN ISO 3336-1996 |
牙科学.合成聚合物牙齿 |
Dentistry - Synthetic polymer teeth (ISO 3336:1993); German version EN ISO 3336:1996 |
| DIN EN ISO 3344-1997 |
增强制品.水份含量的测定 |
Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997 |
| DIN EN ISO 3381-2005 |
铁路设施.声学.有轨车辆内的噪声测量 |
|
| DIN EN ISO 3382-2000 |
声学.参考其它声学参数的房间混响时间的测量 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997); German version EN ISO 3382:2000 |
| DIN EN ISO 3385-1995 |
软质泡沫聚合材料.用定载冲击法测定疲劳 |
Flexible cellular polymeric materials - Determination of fatigue by constant load pounding (ISO 3385:1989); German version EN ISO 3385:1995 |
| DIN EN ISO 3386-1-1998 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第1部分:低密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986); German version EN ISO 3386-1:1997 |
| DIN EN ISO 3386-2-1998 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第2部分:高密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997); German version EN ISO 3386-2:1997 |
| DIN EN ISO 3405-2001 |
石油产品.在大气压下测定蒸馏特性 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); German version EN ISO 3405:2000 |
| DIN EN ISO 3411-1999 |
土方机械.操作者的人体尺寸和操作者最小座舱空间 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995); German version EN ISO 3411:1999 |
| DIN EN ISO 3450-1996 |
土方机械.装橡胶轮胎机械的制动装置.系统,要求和检验 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996); German version EN ISO 3450:1996 |
| DIN EN ISO 3451-1-1997 |
塑料.灰份的测定.第1部分:一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997); German version EN ISO 3451-1:1997 |
| DIN EN ISO 3451-4-2001 |
塑料.灰分的测定.第4部分:聚酰胺 |
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998); German version EN ISO 3451-4:2000 |
| DIN EN ISO 3451-5-2002 |
塑料.灰分的测定.第5部分:聚氯乙烯 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002); German version EN ISO 3451-5:2002 |
| DIN EN ISO 3452-2-2000 |
无损试验.渗透试验.第2部分:渗透材料试验 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000); German version EN ISO 3452-2:2000 |
| DIN EN ISO 3452-3-1999 |
无损检验.渗透检验.第3部分:标准试样 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998); German version EN ISO 3452-3:1998 |
| DIN EN ISO 3452-4-1999 |
无损检验.渗透检验.第4部分:设备 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998); German version EN ISO 3452-4:1998 |
| DIN EN ISO 3457-1995 |
土方机械.挡板和护罩.定义和规范 |
Earth moving machinery - Guards and shields - Definitions and specifications (ISO 3457:1986); German version EN ISO 3457:1995 |
| DIN EN ISO 3497-2001 |
金属镀层.镀层厚度的测量.X射线光谱测定法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000 |
| DIN EN ISO 3506-1-1998 |
不锈钢制连接件的机械性能.第1部分:螺丝 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
| DIN EN ISO 3506-2-1998 |
耐腐蚀不锈钢紧固件的机械特性.第2部分:螺母 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 |
| DIN EN ISO 3506-3-1998 |
耐腐蚀不锈钢紧固件的机械特性.第3部分:螺销和类似的无拉应力的螺丝 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997 |
| DIN EN ISO 3521-1999 |
塑料.不饱和聚酯和环氧树脂.体积的总收缩量的测定 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999 |
| DIN EN ISO 3543-2001 |
金属和非金属涂层.厚度测量.β射线反向散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000 |
| DIN EN ISO 3549-2002 |
色漆用锌粉颜料.规范和试验方法 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995); German version EN ISO 3549:2002 |
| DIN EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰条件下小试样水平方向燃烧特性的实验室评定 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000); German version EN ISO 3582:2000 |
| DIN EN ISO 3593-1994 |
淀粉.灰分的测定 |
Starch - Determination of ash (ISO 3593:1981); German version EN ISO 3593:1994 |
| DIN EN ISO 3596-2002 |
动植物脂肪和油.不可皂化物的测定.二已醚萃取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001 |
| DIN EN ISO 3613-2002 |
锌、镉、铝锌合金和锌铝合金的铬酸盐转化镀层.试验方法 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); German version EN ISO 3613:2001 |
| DIN EN ISO 3630-1-1994 |
牙根管器械.第1部分:锉刀、扩孔器、毛刺钻孔器、粗锉、软膏、探测器和棉条钻孔器 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carries, explorers and cotton broaches (ISO 3630-1:1992); German version EN ISO 3630-1:1994 |
| DIN EN ISO 3630-2-2001 |
牙根管器械.第2部分:扩管器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000); German version EN ISO 3630-2:2000 |
| DIN EN ISO 3630-3-1996 |
牙根管器械.第3部分:充盈冷凝器,充盈充填器和充盈分配器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994); German version EN ISO 3630-3:1996 |
| DIN EN ISO 3650-1999 |
几何产品规范(GPS).长度标准.块规 |
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 |
| DIN EN ISO 3651-1-1998 |
不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用测量质量损失的办法进行硝酸中的腐蚀试验(晶间腐蚀试验) |
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German v |
| DIN EN ISO 3651-2-1998 |
不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2: |
| DIN EN ISO 3656-2002 |
动植物脂肪和油.以特定的紫外线消光系数表示的紫外线吸收率的测定 |
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002); German version EN ISO 3656:2002 |
| DIN EN ISO 3668-2001 |
涂料和清漆.涂料颜色的外观比较 |
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998); German version EN ISO 3668:2001 |
| DIN EN ISO 3671-1998 |
塑料.氨基塑料模塑材料.挥发性物质的测定 |
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 |
| DIN EN ISO 3672-1-2002 |
塑料.未饱和的聚酯树脂.第1部分:命名体系 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001 |
| DIN EN ISO 3672-2-2002 |
塑料.未饱和的聚酯树脂.第2部分:试样制备和特性测定 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001 |
| DIN EN ISO 3673-1-1999 |
塑料.环氧树脂.第1部分:名称与符号 |
Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999 |
| DIN EN ISO 3673-2-2000 |
塑料.环氧树脂.第2部分:试验样品制备和特性测定 |
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999 |
| DIN EN ISO 3675-1999 |
原油和液体石油产品.密度或相对密度的实验室测定.石油密度计法 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998 |
| DIN EN ISO 3677-1995 |
软钎焊,铜焊和硬钎焊接用填充金属.命名 |
Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992); German version EN ISO 3677:1995 |
| DIN EN ISO 3678-1995 |
色漆和清漆.无印痕试验 |
Paints and varnishes - Print-free test (ISO 3678:1976); German version EN ISO 3678:1995 |
| DIN EN ISO 3679-2004 |
闪点的测定.快速平衡闭杯法 |
|
| DIN EN ISO 3680-2004 |
闪和非闪测定.快速平衡闭杯法 |
|
| DIN EN ISO 3681-1998 |
色漆和清漆用粘合剂.皂化值的测定.滴定法 |
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:1996); German version EN ISO 3681:1998 |
| DIN EN ISO 3690-2001 |
焊接及相关工艺.电弧焊接含铁金属中氢含量的测定 |
Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO/DIS 3690:2000); German version EN ISO 3690:2000 |
| DIN EN ISO 3715-1-2004 |
船舶和海上技术.船舶用推进装置.推进器的几何学词汇 |
|
| DIN EN ISO 3715-2-2003 |
船舶和海上技术.船舶用推进器设备.第2部分:可变距推进器设备用词汇 |
Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001); German version EN ISO 3715-2:2002 |
| DIN EN ISO 3727-1-2002 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第1部分:含水量的测定(基准方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001 |
| DIN EN ISO 3727-2-2002 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第2部分:非脂肪固体含量的测定(基准方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001 |
| DIN EN ISO 3727-3-2003 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第3部分:脂肪含量的计算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003) |
| DIN EN ISO 3735-1999 |
原油和燃料油.沉积物的测定.萃取法 |
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735-1999); German version EN ISO 3735:1999 |
| DIN EN ISO 3740-2001 |
声学.噪声源音响功率级的测定.基础标准使用指南 |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000 |
| DIN EN ISO 3741 Berichtigung 1-2002 |
对DIN EN ISO 3741:2001-01的勘误 |
Corrigenda to DIN EN ISO 3741:2001-01 (EN ISO 3741:1999/AC:2002) |
| DIN EN ISO 3741-2001 |
声学.用声压法测定噪声源声级.混响室用精确方法(ISO 3741:1999) |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); German version EN ISO 3741:1999 |
| DIN EN ISO 3743-1-1995 |
声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法 |
Acoustics - Determination of sound power levels of noise sources; engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994); German version EN ISO 3743-1:1995 |
| DIN EN ISO 3743-2-1996 |
声学.利用声压对噪声源混响场噪声源声功率级的测定.在混响场中对小声源,可移动声源的工程测量方法.第2部分:用专用混响试验室的测量方法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); German version EN ISO 37 |
| DIN EN ISO 3744-1995 |
声学.噪声源音响功率级的测定.反射平面上基本自由声场用2级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essential free field over a reflecting plane (ISO 3744:1994); German version EN ISO 3744:1995 |
| DIN EN ISO 3745-2004 |
声学.利用声压测定噪声源的声功率级.消声室和半消声室的精确方法 |
|
| DIN EN ISO 3746-1995 |
声学.声压测量产生的噪音源的声功率级测定.反射平面上3级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995); German version EN ISO 3746:1995 |
| DIN EN ISO 3747-2001 |
声学.用声压测定噪声源的声级 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000); German version EN ISO 3747:2000 |
| DIN EN ISO 3759-1995 |
纺织品.测定尺寸变化试验用织物样品和服装的制备、标记和测量 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994); German version EN ISO 3759:1995 |
| DIN EN ISO 376-2003 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:1999); German version EN ISO 376:2002 |
| DIN EN ISO 376-2005 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
|
| DIN EN ISO 3766 Berichtigung 1-2005 |
对DIN EN ISO 3766-2004的勘误 |
|
| DIN EN ISO 3766-2004 |
建筑工程制图.钢筋混凝土的简化画法 |
|
| DIN EN ISO 377-1997 |
钢和钢产品.机械试验用试样和试件的定位与制备 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997); German version EN ISO 377:1997 |
| DIN EN ISO 3785-1995 |
钢.试件轴线的规定 |
Steel - Designation of test piece axes (ISO 3785:1976); German version EN ISO 3785:1995 |
| DIN EN ISO 3796-2002 |
船舶和航海技术.外开单扇门的净宽 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999); German version EN ISO 3796:2001 |
| DIN EN ISO 3815-2-2005 |
锌和锌合金.第2部分:用感应耦合等离子体光辐射光谱测定法分析 |
|
| DIN EN ISO 3822-1-1999 |
声学.试验室中检验供水设备上管件和装置中发出的噪声的性质.第1部分:测量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999 |
| DIN EN ISO 3822-2-1995 |
声学.由供水设施和设备发出噪音的实验室试验.第2部分:放水龙头和混合电池的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995); German version EN ISO 3822-2:1995 |
| DIN EN ISO 3822-3-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第3部分:管线上用的管件的连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
| DIN EN ISO 3822-4-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第4部分:特殊管件用连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
| DIN EN ISO 3823-1-1999 |
牙科用旋转器械.牙钻.第1部分:钢制牙钻和硬质合金牙钻 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998 |
| DIN EN ISO 3826-1-2004 |
人体血液和血液成分用折式塑料容器.第1部分:常规容器 |
|
| DIN EN ISO 3830-1995 |
石油产品.汽油中铅含量的测定.一氯化碘法 |
Petroleum products - Determination of lead content of gasoline - Iodine monochlorid method (ISO 3830:1993); German version EN ISO 3830:1995 |
| DIN EN ISO 3838-1995 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞阻比重瓶法和带刻度双毛细菅比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983); German version EN ISO 3838:1995 |
| DIN EN ISO 3838-2004 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
|
| DIN EN ISO 3861-1997 |
喷砂用橡胶软管.要求 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3868-1995 |
金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994 |
| DIN EN ISO 3882-1995 |
金属和其他无机物涂层.厚度测量方法述评 |
Metallic and other non-organic coatings - Review of methods of measurement of thickness (ISO 3882:1986); German version EN ISO 3882:1994 |
| DIN EN ISO 389-1-2000 |
声学.音响设备校正用参考零点.第1部分:纯音和耳挂式耳机用参考等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent treshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998); German version EN ISO 389-1:2000 |
| DIN EN ISO 389-2-1996 |
声学.音响设备校正标准参考零点.第2部分:纯音和插入式耳机用参考等效最低限度声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994); German version EN ISO 389-2:1996 |
| DIN EN ISO 389-3-1999 |
声学.音响设备校正标准参考零点.第3部分:纯音和骨传导耳机用参考等效极限声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 389-3:1998 |
| DIN EN ISO 389-4-1999 |
声学.音响设备校正标准参考零点.第4部分:窄带遮敝噪声用参考声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 389-5-2000 |
声学.听力测定设备校正参考零点.频率范围8kHz-16kHz的纯音参考相等的阈值声音压力水平 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequence range 8 kHz to 16 kHz (ISO/TR 389-5:1998); German version EN ISO 389-5:1999 |
| DIN EN ISO 389-7-1998 |
声学.音响设备的校正标准基准水平.第7部分:自由声波场和扩散声场条件下的基准听觉阈 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996); German version EN ISO 389-7:1998 |
| DIN EN ISO 389-8-2004 |
声学.校准听力设备的基准零级.第8部分:纯音和环绕式耳机的基准等效阈声压级 |
|
| DIN EN ISO 3892-2001 |
金属材料的转化涂层.单位面积涂层质量的测定.重量分析法 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com