标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 6042-2000 |
造船.防风雨的单扇钢门 |
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998); German version EN ISO 6042:2000 |
| DIN EN ISO 61-2000 |
塑料.不能由专用漏斗注入的模压材料表观密度的测定 |
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999 |
| DIN EN ISO 6103-2000 |
粘合的磨料制品.验收试验可允许的磨轮不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999); German version EN ISO 6103:1999 |
| DIN EN ISO 6103-2005 |
粘合磨料产品.交货时砂轮的可允许不平衡性.静态试验 |
|
| DIN EN ISO 613-2002 |
船舶和航海技术.磁罗盘、罗盘座和方位读数装置.B级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); German version EN ISO 613:2001 |
| DIN EN ISO 6157-2-2004 |
紧固件.表面缺陷.第2部分:螺母 |
|
| DIN EN ISO 6158-2004 |
金属涂层.工程用铬电镀层 |
|
| DIN EN ISO 6165-2002 |
土方机械.基本类型.词汇 |
Earth-moving machinery - Basic types - Vocabulary (ISO 6165:2001); German version EN ISO 6165:2002 |
| DIN EN ISO 6179-2001 |
硫化或热塑橡胶.橡胶薄板和橡胶涂层织物.挥发性液体渗透速度的测定(重力测定技术) |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6185-1-2002 |
充气艇.第1部分:发动机最大额定功率为4.5kW的动力艇 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 |
| DIN EN ISO 6185-2-2002 |
充气艇.第2部分:发动机最大额定功率为4.5kW到(并包括)15 kW的动力艇 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 |
| DIN EN ISO 6185-3-2002 |
充气艇.第2部分:发动机最大额定功率为15kW及更大的动力艇 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 |
| DIN EN ISO 6186-1998 |
塑料.松散性测定 |
Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998 |
| DIN EN ISO 62-1999 |
塑料.吸水性的测定 |
Plastics - Determination of water absorption (ISO 62:1999); German version EN ISO 62:1999 |
| DIN EN ISO 6222-1999 |
水质.可培养微生物的计数.通过对营养琼脂培养基培养的计群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999); German version EN ISO 6222:1999 |
| DIN EN ISO 6224-1997 |
一般目的用水时使用的带织物加固内衬的橡胶软管.规范 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997) |
| DIN EN ISO 6245-2003 |
石油产品.灰分的测定 |
(Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002) |
| DIN EN ISO 6246-1998 |
石油产品.易挥发和中等蒸馏燃料的蒸发残渣.顶吹法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996) |
| DIN EN ISO 6251-1998 |
液化石油气.对铜的腐蚀性.铜片试验 |
(Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998) |
| DIN EN ISO 6252-1998 |
塑料.环境应力破裂(ESC)测定.持久应力试验 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997) |
| DIN EN ISO 6259-1-2002 |
热塑管.拉伸特性的测定.第1部分:通用试验方法 |
(Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001) |
| DIN EN ISO 6270-1-2002 |
涂料和清漆.耐湿度的测定.第1部分:连续冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); German version EN ISO 6270-1:2001 |
| DIN EN ISO 6272-1-2004 |
色漆和清漆.快速变形(耐冲击)试验.第1部分:大区域压头落锤试验 |
|
| DIN EN ISO 6272-1994 |
色漆和清漆.落锤试验 |
Paints and varnishes - Falling-weight test (ISO 6272:1993); German version EN ISO 6272:1994 |
| DIN EN ISO 6320-2000 |
动植物脂肪和油.折射指数的测定 |
Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000); German version EN ISO 6320:2000 |
| DIN EN ISO 6321-2002 |
动植物脂肪和油.开口毛细管中熔点(裂解点)测定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002 |
| DIN EN ISO 6326-3-1998 |
天燃气.硫化物的测定.第3部分:用电势分析法对硫化氢,硫醇式硫和硫化羰式硫的测定 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997 |
| DIN EN ISO 6326-5-1998 |
天燃气.硫化物的测定.第5部分:林格聂尔(lingener)燃烧法 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997 |
| DIN EN ISO 6330-2001 |
纺织品.织物试验的家庭洗涤和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); German version EN ISO 6330:2000 |
| DIN EN ISO 6341-1996 |
水质.抑制大型Daphnia magna Straus(枝角目,甲壳纲)活动性的测定.剧毒试验 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:1996); German version EN ISO 6341:1996 |
| DIN EN ISO 6346-1996 |
ISO集装箱.编码.识别和标记 |
Freight containers - Coding, identification and marking (ISO 6346:1995); German version EN ISO 6346:1995 |
| DIN EN ISO 6360-1-2004 |
牙医学.旋转器械的数字编码系统.第1部分:一般特点 |
|
| DIN EN ISO 6360-2-2005 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
| DIN EN ISO 6360-4-2004 |
牙科学.旋转器械数字编码体系.第4部分:金刚石器械的特性 |
|
| DIN EN ISO 6360-6-2004 |
牙科学.旋转器械数字编码体系.第6部分:磨削器械特性 |
|
| DIN EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第1部分:裤型撕裂法 |
|
| DIN EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第2部分:埃尔曼多法 |
|
| DIN EN ISO 6385-2004 |
工作系统设计的人类工效原则 |
|
| DIN EN ISO 6401-2005 |
塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 |
|
| DIN EN ISO 6402-1-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压材料.第1部分:命名系统和规范基础 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| DIN EN ISO 6402-2-1999 |
塑料.耐冲击丙烯腈/苯乙烯模制和挤压材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:试验试样的制备和特性的测定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 640 |
| DIN EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙烯(ACS)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| DIN EN ISO 6416-2005 |
水文测量.超声波(声波)法测量流量 |
|
| DIN EN ISO 642-2000 |
钢.端头淬硬性试验(乔米尼(Jominy)试验) |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999 |
| DIN EN ISO 6427-1998 |
塑料.通过有机溶剂测定可萃取成份(标准法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998 |
| DIN EN ISO 643 Berichtigung 1-2004 |
DIN EN ISO 643-2003的勘误 |
|
| DIN EN ISO 643-2003 |
钢.表面粒度的缩微照相测定 |
(Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003) |
| DIN EN ISO 6468-1997 |
水质.选出的有机氯杀虫剂,多氯联苯和氯苯的测定.在液-液萃取后的气相色谱法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996 |
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6506-1-1999 |
金属材料.布氏硬度试验.第1部分:试验方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 |
| DIN EN ISO 6506-2 Bb.1-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机的校验.依据验证结果及为试验机与冲头设计所作修正 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the plunger |
| DIN EN ISO 6506-2-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机械的校准与标定 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of hardness testing machines (ISO 6506-2:1999); German version EN ISO 6506-2:1999 |
| DIN EN ISO 6506-3 Bb.1-1999 |
金属材料.布氏硬度试验.第3部分:标准试块校验.标准试块设计样品 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks; example of design of reference blocks |
| DIN EN ISO 6506-3-1999 |
金属材料.布氏硬度试验.第3部分:标准试块的校验 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999); German version EN ISO 6506-3:1999 |
| DIN EN ISO 6507-1-1998 |
金属材料.维氏硬度试验.第1部分:试验方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 |
| DIN EN ISO 6507-2 Bb.1-1998 |
金属材料.维氏硬度检验.第2部分:试验机械检验.检验和试验机械结构的建议及打压印章 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines; recommendations according to the verification and for the performance of the testing machine and the plunger |
| DIN EN ISO 6507-2-1998 |
金属材料.维氏硬度试验.第2部分:试验机械的校准 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 |
| DIN EN ISO 6507-3 Bb.1-1998 |
金属材料.维氏硬度检验.第3部分:硬度对比板的校准.使用硬度对比板举例 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6507-3-1998 |
金属材料.维氏硬度试验.第3部分:标准块的校准 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997); German version EN ISO 6507-3:1997 |
| DIN EN ISO 6508-1 Berichtigung 1-2000 |
DIN EN ISO 6508-1的技术勘误 |
Corrigendum to DIN EN ISO 6508-1:1999-10 |
| DIN EN ISO 6508-1-1999 |
金属材料.洛氏硬度试验(等级A、B、C、D、E、F、G、H、K、N、T).第1部分:试验方法 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (ISO 6508-1:1999); German version EN ISO 6508-1:1999 |
| DIN EN ISO 6508-2 Bb.1-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第2部分:硬度试验机械的标定与校验.根据标定及为试验机械与冲头所作推荐 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the p |
| DIN EN ISO 6508-2-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第2部分:试验机械的标定与校验 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of testing machines (ISO 6508-2:1999); German version EN ISO 6508-2:1999 |
| DIN EN ISO 6508-3 Bb.1-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第3部分:标准块校验.标准块性能样品 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6508-3-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).标准块校验 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks (ISO 6508-3:1999); German version EN ISO 6508-3:1999 |
| DIN EN ISO 6509-1995 |
金属和合金的腐蚀.黄铜耐脱锌性的测定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981); German version EN ISO 6509:1995 |
| DIN EN ISO 6520-1-1999 |
焊接及相关工艺.金属材料中几何的不均匀性分类.第1部分:熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998); Trilingual version EN ISO 6520-1:1998 |
| DIN EN ISO 6520-2-2002 |
焊接及相关工艺.金属材料中几何缺陷的分类.第2部分:压焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001 |
| DIN EN ISO 6529-2003 |
防护服.化学试剂防护.防护服面料液体和气体的渗透性测定 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version EN ISO 6529:2001 |
| DIN EN ISO 6530-2005 |
防护服装.对液态化学制品的防护.材料抗渗透性的试验方法 |
|
| DIN EN ISO 6530-2005 |
防护服装.对液态化学制品的防护.材料抗渗透性的试验方法 |
|
| DIN EN ISO 6551-1996 |
石油液体和气体.动态测量的正确可靠性.电脉冲数据和/或电子脉冲数据的电缆传输 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995 |
| DIN EN ISO 6570-2004 |
天然气.烃液潜在含量的测定.重量分析法 |
|
| DIN EN ISO 6579-2003 |
食品和动物饲料的微生物学.测沙门氏菌用水平检测法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. (ISO 6579:2002); German version EN ISO 6579:2002 |
| DIN EN ISO 658-2002 |
油料种子.杂质含量的测定 |
Oilseeds - Determination of content of impurities (ISO 658:2002); German version EN ISO 658:2002 |
| DIN EN ISO 659-1998 |
油籽.油含量测定(参照法) |
Oilseeds - Determination of oil content (Referenz method) (ISO 659:1998); German version EN ISO 659:1998 |
| DIN EN ISO 660-1999 |
动植物脂肪和油.酸值和酸度的测定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996); German version EN ISO 660:1999 |
| DIN EN ISO 660-2005 |
动植物油脂.酸值和酸度的测定 |
|
| DIN EN ISO 6603-1-2000 |
塑料.硬质塑料耐冲击性能的测定.第1部分:非仪器操作的冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000 |
| DIN EN ISO 6603-2-2002 |
塑料.硬质塑料击穿性能的测定.第2部分:仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 |
| DIN EN ISO 661-1995 |
动植物脂肪和油.试样的制备 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989); German version EN ISO 661:1995 |
| DIN EN ISO 661-2005 |
动植物油脂.试样的制备 |
|
| DIN EN ISO 662-2001 |
动物和植物油脂.水分和挥发物含量的测定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998); German version EN ISO 662:2000 |
| DIN EN ISO 663-2002 |
动植物脂肪和油.不可溶解杂质含量的测定 |
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2000); German version EN ISO 663:2001 |
| DIN EN ISO 664-1995 |
油料种子.将小样缩分为分析试样 |
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990); German version EN ISO 664:1995 |
| DIN EN ISO 665-2001 |
油料种子.水和挥发物质含量的测定 |
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000); German version EN ISO 665:2000 |
| DIN EN ISO 6682-1995 |
土方机械.控制装置的最佳操作和活动范围 |
Earth moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amendment 1:1989); German version EN ISO 6682:1995 |
| DIN EN ISO 6683-1999 |
土方机械.座椅安全带和座椅安全带固定件 |
Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990); German version EN ISO 6683:1999 |
| DIN EN ISO 6683-2005 |
土方机械.座椅安全带和座椅安全带固定器.性能要求和试验 |
|
| DIN EN ISO 6708-1995 |
管件.DN(公称宽度)的定义和选择 |
(Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995) |
| DIN EN ISO 6721-1-2003 |
塑料.动态机械性能的测定.第1部分:一般原理 |
(Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001); German version EN ISO 6721-1:2002) |
| DIN EN ISO 6721-2-1996 |
塑料.电动机械性能的测定.第2部分:扭摆法 |
(Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-2:1996) |
| DIN EN ISO 6721-3-1996 |
塑料.电动机械性能的测定.第3部分:弯曲振动.共振法 |
(Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration; resonance-curve (ISO 6721-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-3:1996) |
| DIN EN ISO 6743-4-2002 |
润滑剂、工业用润滑油和有关产品(L类).分类.第4部分:H族(液压系统) |
(Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001) |
| DIN EN ISO 6744-1-2004 |
色漆和清漆用粘合剂.醇酸树脂.第1部分:通用试验方法 |
|
| DIN EN ISO 6744-2-2004 |
色漆和清漆用粘合剂.醇酸树脂.第2部分:邻苯二甲酸酐含量的测定 |
|
| DIN EN ISO 6744-3-2004 |
色漆和清漆用粘合剂.醇酸树脂.第3部分:非皂化物含量的测定 |
|
| DIN EN ISO 6744-4-2004 |
色漆和清漆用粘合剂.醇酸树脂.第4部分:脂肪酸含量的测定 |
|
| DIN EN ISO 6800-1998 |
动植物脂肪和油.甘油三酸脂分子的2位中脂肪酸的化学成份的测定 |
(Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997); German version EN ISO 6800:1997) |
| DIN EN ISO 6803-1997 |
橡胶和塑料软管及软管管道.无弯曲的液压压力脉冲试验 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 6806-1996 |
用于油燃烧器的软管和软管组件.规范 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 |
| DIN EN ISO 6807-2004 |
旋转式钻探和振动用橡胶软管和软管组件.规范 |
|
| DIN EN ISO 6808-2000 |
石油液态产品的抽吸和低压排放用塑料软管及软管组件.规范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN ISO 6817-1995 |
封闭管道中导电液体流量测量.电磁流率计测量法 |
Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995 |
| DIN EN ISO 683-17-2000 |
热处理钢、合金钢和易切削钢.第17部分:球轴承和滚动轴承钢 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999 |
| DIN EN ISO 6845-2003 |
表面活性剂.工业链烷磺酸盐.链烷单磺酸盐平均相对分子量和链烷单磺酸盐含量的测定 |
(Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003) |
| DIN EN ISO 6847-2002 |
焊接消耗品.化学分析用焊接金属块的沉积 |
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000); German version EN ISO 6847:2001 |
| DIN EN ISO 6860-1995 |
色漆和清漆.弯曲试验(锥体心轴) |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984); German version EN ISO 6860:1995 |
| DIN EN ISO 6865-2001 |
动物饲料.粗纤维含量的测定.中间过滤法 |
Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 |
| DIN EN ISO 6867-2001 |
动物饲料.维生素E含量的测定.使用高性能液相色谱法 |
Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000); German version EN ISO 6867:2000 |
| DIN EN ISO 6869-2001 |
动物饲料.钙,铜,铁,镁,钾,锰和钠,锌含量的测定.原子吸收光谱法 |
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000); German version EN ISO 6869:2000 |
| DIN EN ISO 6871-1 Berichtigung 1-2000 |
对DIN EN ISO 6871-1:1996-12的勘误 |
Corrigenda to DIN EN ISO 6871-1:1996-12 |
| DIN EN ISO 6871-1-1996 |
牙科基本金属铸造合金.第1部分:钴基合金 |
Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994); German version EN ISO 6871-1:1996 |
| DIN EN ISO 6871-2-1996 |
牙科基本金属铸造合金.第2部分:镍基合金 |
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994); German version EN ISO 6871-2:1996 |
| DIN EN ISO 6872-1999 |
牙科烤瓷 |
Dental ceramic (ISO 6872:1995 including Amendment 1:1997): German version EN ISO 6872:1998 |
| DIN EN ISO 6873-2000 |
牙科用石膏制品 |
Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000 |
| DIN EN ISO 6874-2005 |
牙科学.树脂基窝沟和裂纹封闭剂 |
|
| DIN EN ISO 6875-1996 |
牙科设备.牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995); German version EN ISO 6875:1996 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com