标准号 |
中文名称 |
英文名称 |
EN 2832-1993 |
航空航天系列钢的氢(蚀致)脆性V切口试件试验 |
Aerospace series - Hydrogen embrittlement of steels - Notched specimen test |
EN 28339-1990 |
房层建筑 连接件 密封件 拉伸性能的测定 |
Building construction - Jointing products - Sealants - Determination of tensile properties (ISO 8339:1984) |
EN 28340-1990 |
房层建筑 连接件 密封件 延伸状态的拉伸性能测定 |
Building construction Jointing products - Sealants; Determination of tensile properties at maintained extension (ISO 8340:1984) |
EN 28343-1991 |
镍铁 硅含量的测定 重量法 |
Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985) |
EN 28362-1-1993 |
注射容器及附件 第1部分:玻璃管注射瓶 |
Injection containers for injectables and accessories; part 1: injection vials made of glass tubing (ISO 8362-1:1989) |
EN 28362-2-1993 |
注射剂用注射器容器及附件 第2部分:注射瓶塞 |
Injection containers for injectables and accessories; Part 2: Closures for injection vials (ISO 8362-2:1988) |
EN 28362-4-1993 |
注射剂用注射器容器及附件 第4部分:模制玻璃注射瓶 |
Injection containers for injectables and accessories; Part 4: Injection vials made of moulded glass (ISO 8362-4:1989) |
EN 28394-1990 |
房层建筑 连接件 单个密封件可挤压性的测定 |
Building construction - Jointing products - Determination of extrudability of one-component sealants (ISO 8394:1988) |
EN 284-1992 |
交换体 C级交换体 尺寸和一般要求 |
Swap bodies; swap bodies of class C; dimensions and general requirements |
EN 28430-1-1992 |
电阻点焊 电极夹具 第1部分:锥形接头锥度1:10 |
Resistance spot welding- Electrode holders- Part 1: Taper fixing 1:10 (ISO 8430-1:1988) |
EN 28430-2-1992 |
电阻点焊 电极夹具 第2部分:莫氏装配锥度 |
Resistance spot welding- Electrode holders- Part 2: Morse taper fixing (ISO 8430-2:1988) |
EN 28430-3-1992 |
电阻点焊 电极夹具 第3部分:未端推入固定的平行装配 |
Resistance spot welding- Electrode holders- Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988) |
EN 28474-1992 |
包装 满装的运输包装 浸水试验 |
Packaging; complete, filled transport packages; water immersion test (ISO 8474:1986) |
EN 2851-1992 |
航空航天系列除发动机外的零部件和组件的标志图纸上标记 |
Aerospace series; Marking of parts and assemblies other than engines; Indications on drawings |
EN 28510-1-1993 |
粘合剂 软质和硬质粘合试样组件的剥离试验 第1部分:90°剥离 |
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90 °peel (ISO 8510-1:1990) |
EN 28510-2-1993 |
粘合剂 软质和硬质粘合试样组件的剥离试验 第2部分:.180°剥离 |
Adhesives - Peel test for a flexible - bonded - to - rigid test specimen assembly - Part 2: 180 °peel (ISO 8510-2:1990) |
EN 2859-1995 |
航空航天系列镀镉合金钢制标准六角头紧公差普通柄短螺纹螺栓等级:1100 MPa (环境温度)/235℃ |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
EN 286-1-1998 |
装空气或氮气的简单不着火的压力容器 第1部分:一般用途压力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes |
EN 286-2-1992 |
装空气或氮气的简单不着火的压力容器 第2部分:机动车及其拖车气动刹车和辅助系统用压力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
EN 286-3-1994 |
装空气或氮气的简单不着火的压力容器 第3部分:铁路运输车辆气动刹车设备和辅助气动设备用的钢制压力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 286-4-1994 |
装空气或氮气的简单不着火的压力容器 第4部分:铁路运输车辆气动刹车设备和辅助气动设备用的铝合金压力容 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 28601-1992 |
数据和交换格式 信息交换 时间和日期的表示 |
Data elements and interchange formats - Information interchange; representation of dates and times (ISO 8601:1988 and technical corrigendum 1:1991) |
EN 28653-1992 |
首饰 戒指尺寸 定义、测量和标记 |
Jewellery; ring sizes; definition, measurement and designation (ISO 8653:1986) |
EN 28654-1992 |
金合金颜色 定义、颜色范围和标记 |
Colours of gold alloys - Definition, range of colours and designation (ISO 8654:1987) |
EN 28659-1990 |
热塑性塑料阀门 疲劳强度 试验方法 |
Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989) |
EN 28662-1-1992 |
便携式手提动力工具 手柄振动测量 第1部分:总则 |
Hand-held portable power tools; Measurement of vibrations at the handle; Part 1: General (ISO 8662-1:1988) |
EN 28692-1993 |
水质 用绿藻类栅薄属和月牙藻属进行的淡水藻类生长抑制试验 |
Water quality; Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692:1989) |
EN 28736-1992 |
不淬硬内螺纹圆锥销 |
Taper pins with internal thread, unhardened (ISO 8736:1986) |
EN 28737-1992 |
不淬硬外螺纹圆锥销 |
Taper pins with external thread, unhardened (ISO 8737:1986) |
EN 28738-1992 |
叉杆销用平垫圈 产品等级A级 |
Plain washers for clevis pins; product grade A (ISO 8738:1986) |
EN 28749-1992 |
销和槽销 剪切试验 |
Pins and grooved pins; shear test (ISO 8749:1986) |
EN 28768-1992 |
包装 满装的运输包装 倒侄塌试验 |
Packaging; complete, filled transport packages; toppling test (ISO 8768:1986) |
EN 288-5-1994 |
金属材料焊接程序规范和鉴定 第5部分:使用已被认可的焊接耗材对电弧焊的鉴定 |
Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding |
EN 288-6-1994 |
金属材料焊接程序规范和鉴定 第6部分:有关以前经验的鉴定 |
Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience |
EN 288-7-1995 |
金属材料焊接程序规范和鉴定 第7部分:使用标准焊接程序的电弧焊的鉴定 |
Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding |
EN 288-8-1995 |
金属材料焊接程序规范和鉴定 第8部分:用预焊接试验进行鉴定 |
Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test |
EN 288-9-1999 |
金属材料焊接程序规范和鉴定 第9部分:传输管道陆地和海上场所对接焊中管道焊接用焊接程序试验 |
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
EN 28839-1991 |
紧固件机械性能 有色金属制造螺栓、螺钉、螺柱和螺母 |
Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986) |
EN 2884-1996 |
航空航天系列用MoS2润滑阳极氧化钛合金制短螺纹松公差普通柄偏置十字盘形头凹槽螺钉等级:1100 MPa (环 |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
EN 28847-1989 |
小艇 操舵装置 钢索及滑轮系统 |
Small craft; steering gear; wire rope and pulley systems (ISO 8847:1987) |
EN 2885-1996 |
航空航天系列 镀镉合金钢制短螺纹松公差退柄偏置十字盘头凹槽螺钉等级:900MPa(环境温度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
EN 2886-1996 |
航空航天系列 镀镉合金钢偏置十字凹槽紧公差普通柄短螺纹螺钉等级: 900MPa(环境温度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
EN 2887-1995 |
航空航天系列 钝化耐腐蚀钢标准六角头螺全纹头螺栓等级: 600 MPa( 环境温度)/425 ℃ |
Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ℃ |
EN 2888-1995 |
航空航天系列钝纯化耐腐蚀钢标准六角头紧公差普通柄短螺纹螺栓等级: 600 MPa(环境温度)/425 ℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
EN 2889-1995 |
航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级:900MPa (环境温度)/235℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ℃ |
EN 289-1993 |
橡胶和塑料机械 压制和传递模制压力机 设计的安全要求 |
Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design |
EN 289-2004 |
橡胶和塑料加工机械.压力机.安全要求 |
|
EN 28960-1993 |
冷藏箱 家用和类似用途冷冻食品储藏柜和食品冷冻柜空气噪声的测量 |
Refrigerators, frozen-food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991) |
EN 2897-1996 |
航空航天系列 镀镉合金钢制盘头偏置十字凹槽紧公差普通柄短螺纹螺钉 等级:1100MPa(环境温度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ℃ |
EN 28970-1991 |
木材结构 机械紧固件接头的试验 对木材密度要求 |
Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989) |
EN 28996-1993 |
人类工效学 代谢热量的测定 |
Ergonomics; Determination of metabolic heat production (ISO 8996:1990) |
EN 29008-1994 |
玻璃瓶 垂直度 试验方法 |
Glass bottles; verticality; test method (ISO 9008:1991) |
EN 29009-1994 |
玻璃容器 以容器底作基准的瓶口高度和不平行度 试验方法 |
Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991) |
EN 29046-1990 |
房层建筑 密封胶 恒温下粘合性能的测定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties at constant temperatures (ISO 9046:1987) |
EN 29048-1990 |
房屋建筑 连接件 标准件上密封稳定性的测定 |
Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987) |
EN 29052-1-1992 |
声学 动力劲度的测定 第1部分:住宅用浮筑地板材料 |
Acoustics - Determination of dynamics stiffness - Part 1: Materials used under floating floors in dwellings |
EN 29053-1993 |
声学 吸声材料 流阻的测定 |
Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991) |
EN 2906-1994 |
航空航天系列FE-PA92HT(A 286)耐热钢十二角头自锁螺母等级:1100MPa(环境温度)/650C° |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 2907-1995 |
航空航天系列镀银FE-PA92HT(A286)耐热钢自锁十二头螺母等级:1100MPa (环境温度)/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 29073-1-1992 |
纺织品 非织造布的试验方法 第1部分:单位面积质量的测定 |
Textiles; test methods for nonwovens; part 1: determination of mass per unit area |
EN 29073-3-1992 |
纺织品 非织造布的试验方法 第3部分:断裂强度和伸长的测定 |
Textiles; test methods for nonwovens; part 3: determination of tensile strength and elongation |
EN 2908-1994 |
航空航天系列FE-PA92HT(A 286)耐热钢十二角头自锁深镗孔螺母等级:1100MPa(环境温度)/650C° |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 2909-1995 |
航空航天系列镀银FE-PA92HT(A286)耐热钢制自锁深镗孔十二角头螺母等级:1100MPa(环境温度)/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 29090-1992 |
气焊以相关工艺用设备的气密特性 |
Gas tightness of equipment for gas welding and allied processes (ISO 9090:1989) |
EN 29092-1992 |
纺织品 非织造布 定义 |
Textiles-Nonwovens-Definition |
EN 2910-1994 |
航空航天系列FE-PA92HT(A 286)耐热钢自锁柄螺母等级:1100MPa(环境温度)/650C° |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 29104-1993 |
封闭管道中流体流量测量 液体电磁流量计性能评定方法 |
Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) |
EN 2911-1995 |
航空航天系列镀银FE-PA92HT(A286)耐热钢制自锁柄螺母等级:1100MPa(环境温度)/650℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
EN 29117-1992 |
色漆和清漆 贯穿干燥状态和贯穿干燥时间 试验方法 |
Paints and varnishes - Determination of through-dry state and through-dry time - Method of test (ISO 9117:1990) |
EN 2912-1996 |
航空航天系列阳极氧化或铬酸盐处理铝合金制大直径平垫圈 |
Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
EN 2913-1999 |
航空航天系列镀镉钢制大直径平垫圈 |
Aerospace series - Washers, flat, large diameter, in steel, cadmium plated |
EN 2914-1996 |
航空航天系列钝化耐热钢制大直径平垫圈 |
Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated |
EN 29168-1994 |
手持式牙科器械 软管连接件 |
Dental handpieces - Hose connectors (ISO 9168:1991) |
EN 292-1-1991 |
机械安全 设计用的基本概念、一般原则 第1部分:基本术语、方法论 |
Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology |
EN 29202-1992 |
首饰 贵金属合金的纯度 |
Jewellery - Fineness of precious metall alloys (ISO 9202:1991) |
EN 29241-2-1993 |
办公用视觉显示终端(VDTs)的人类工效学要求 第2部分:任务要求指南 |
Ergonomic requirements for office work with visual display terminals (VDTs); Part 2: guidance on task requirements (ISO 9241-2:1992) |
EN 2925-1994 |
航空航天系列FE-PA92HT(A286)耐高温钢制长螺纹细柄双六角头螺栓等级:900MPa(环境温度)650℃ |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 2926-1996 |
航空航天系列FE-FA92HT(A286)耐热钢制镀银长螺纹细柄双六角头螺钉等级: 900 MPa(环境温度)/650℃ |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 2927-1996 |
航空航天系列NI-P100HT(Inconel 718)耐热镍基合金制长螺纹细柄双六角头螺钉等级:1275 MPa(环境温度)/6 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ |
EN 2928-1996 |
航空航天系列NI-P100HT(Inconel 718)耐热镍基合金制镀银长螺纹细柄双六角头螺钉等级:1275 MPa(环境温 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃ |
EN 2929-1996 |
航空航天系列NI-P100HT(一种耐热镍基合金)耐热镍基合金制长螺纹细柄双六角头螺钉等级:1210 MPa(环境温 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
EN 29295-1991 |
声学 计算机和办公室设备噪声发射的高频噪声的测量 |
Acoustics; Measurement of high-frequency noise emitted by computer and business equipment (identical with ISO 9295:1988) |
EN 293-1992 |
油压喷雾喷嘴 最低要求 测试 |
Oil pressure atomizing nozzles; minimum requirements; testing |
EN 2930-1996 |
航空航天系列NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基合金镀银长螺纹细柄双六角头螺钉等级: |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
EN 2931-1994 |
航空航天系列FE-PA92HT(A286)耐热钢制长螺纹细柄T形头螺栓等级:900MPa(环境温度)650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ℃ |
EN 29313-1992 |
电阻点焊设备 冷却管 |
Resistance spot welding equipment- Cooling tubes (ISO 9313:1989) |
EN 2932-1996 |
航空航天系列FE-PA92HT(A286)耐热钢镀银长螺纹细螺柄T形头螺栓级等: 900 MPa(环境温度)/650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃ |
EN 2933-1996 |
航空航天系列NI-P100HT718)耐热镍基合金镀银长螺纹细螺柄T形头螺栓等级:1275 MPa(环境温度)/650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
EN 29333-1991 |
牙科上光材料 |
Dental brazing materials (ISO 9333:1990) |
EN 2934-1996 |
航空航天系列合金NI-P100HT((铬镍铁合金718)耐热镍基镀银长螺纹细螺柄T形头螺栓等级:1275 MPa(环境温 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
EN 2935-1996 |
航空航天系列NI-P101HT(沃斯帕洛尹合金)耐热镍基合金镀银长螺纹细螺柄T形头螺栓等级:1210 MPa(环境温 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
EN 2936-1996 |
航空航天系列合金NI-P101HT(沃斯帕洛尹合金)耐热镍基镀银长螺纹细螺柄T形头螺栓等级:1210 MPa(环境温 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
EN 29367-2-1994 |
海运道路车辆捆绑和固定装置 一般要求 第2部分:半挂车 |
Lashing and securing arrangements on road vehicles for sea transportation - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994) |
EN 2937-1994 |
航空航天系列FE-PA92HT(A286)耐热钢全螺纹六角头螺钉等级:900MPa(环境温度) 650℃ |
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 2938-1995 |
航空航天系列镀银FE-PA92HT(A286)耐热钢制全螺纹六角头螺钉等级:900MPa(环境温度)/650℃ |
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 2939-1994 |
航空航天系列FE-PA92HT(A 286)耐热钢100度埋头偏置十字凹槽全螺纹螺钉等级:900MPa(环境温度)/650C° |
Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 294-1992 |
机械安全 避免上肢可到达危险区域的安全距离 |
Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs |
EN 2940-1995 |
航空航天系列镀银FE-PA92HT(A286)耐热钢制全螺纹偏置十字凹槽100度沉头螺钉等级:900 MPa(环境温度)/65 |
Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃ |
EN 2942-1998 |
航空航天系列NI-PH2801(铬镍铁合金X750)耐热镍基合金镀银螺旋形自锁式螺纹插件 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated |
EN 2943-1998 |
航空航天系列自锁螺旋线圈螺纹式插件技术规范 |
Aerospace series - Inserts, screw thread, helical coil, self locking - Technical specification |
EN 2944-1998 |
航空航天系列FE-PA3004耐腐蚀钢螺旋形线圈自锁式螺纹插件 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 |
EN 2945-1998 |
航空航天系列螺旋形线圈自锁螺纹插件组装程序 |
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure |
EN 29453-1993 |
软钎料合金 化学成分和形式 |
Soft solder alloys; chemical compositions and forms (ISO 9453:1990) |
EN 29454-1-1993 |
软钎焊剂 分类和要求 第1部分:.分类、标记和包装 |
Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990) |
EN 29455-1-1993 |
软钎焊剂 试验方法 第1部分:不挥发物质的测定 重量法 |
Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method (ISO 9455-1:1990) |
EN 29455-11-1993 |
软钎焊剂 试验方法 第11部分:钎剂残留物的可溶性 |
Soft soldering fluxes; test methods; part 11: solubility of flux residues (ISO 9455-11:1991) |
EN 29455-14-1993 |
软钎焊剂 试验方法 第14部分:钎剂残留物胶粘度测定 |
Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues (ISO 9455-14:1991) |
EN 29455-5-1993 |
软钎焊剂 试验方法 第5部分:铜镜试验 |
Soft soldering fluxes; test methods; part 5: copper mirror test (ISO 9455-5:1992) |
EN 29455-8-1993 |
软钎焊剂 试验方法 第8部分:锌含量测定 |
Soft soldering fluxes; test methods; part 8: determination of zinc content (ISO 9455-8:1991) |
EN 2948-1996 |
航空航天系列钝化耐热钢制有口垫圈 |
Aerospace series - Washers, tab, in heat resisting steel, passivated |
EN 2949-1996 |
航空航天系列钝化耐腐蚀钢制有线锁紧垫圈 |
Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated |
EN 295-6-1995 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第6部分:陶瓷粘土检修孔的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes |
EN 295-7-1995 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第7部分:管托起用陶瓷粘土管和接头的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking |
EN 29519-1993 |
造船和海上建筑物 踏步级 |
Shipbuilding and marine structures; rungs for dog-step ladders (ISO 9519:1990) |
EN 29539-1992 |
用于气焊、切割及相关工艺用设备的材料 |
Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:1988) |
EN 2955-1993 |
航空航天系列钛和钛合金废料的回收 |
Aerospace series; recycling of titanium and titanium alloy scrap |
EN 29658-1991 |
钢 铝含量的测定 火焰原子吸收光谱法 |
Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990) |
EN 297-7/A1-2004 |
燃气集中供暖锅炉.装有标称热输入量不超过70kw大气燃烧器的B型锅炉 |
|
EN 297/prA4-2003 |
燃气集中加热锅炉 装配有额定输入热量不超过70kW的常压燃烧器的B11型和B11BS型锅炉 修改A4 |
Gas-fired central heating boilers - Type B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; Amendment A4 / Note: Intended as an amendment to EN 297 (1994-05). |
EN 298-2003 |
带或不带鼓风机的燃气炉及燃气装置用自动燃气控制系统 |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |