标准号 |
中文名称 |
英文名称 |
prEN 4067-006-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第006部分:密封的装锁紧螺母 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard |
prEN 4067-007-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第007部分:有钎焊或铜焊圆法 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 007: Hermetic receptacle with round flange attached by soldering or brazing - Product standard |
prEN 4067-008-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第008部分:插头产品标准 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 008: Plug - Product standard |
prEN 4067-009-2001 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第009部分:保护过载插头的盖 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 009: Protective cover for plug; Product standard |
prEN 4068-001-1997 |
航空航天系列飞机用变压器整流器装置第001部分:技术规范 |
Aerospace series - Transformer rectifier units for aircraft - Part 001: Technical specification |
prEN 4071-1999 |
航空航天系列铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓等级:1100 MPa(环境温度) /425℃ |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
prEN 4072-1999 |
航空航天系列铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉等级:1100 MPa(环境 |
Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
prEN 4086-1997 |
标准号: |
中文标题: |
prEN 4089-1997 |
标准号: |
中文标题: |
prEN 4093-1998 |
标准号: |
中文标题: |
prEN 4094-1997 |
航空航天系列真空熔炼非热处理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐热合金再熔料 |
Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Remelting stock |
prEN 4095-1997 |
航空航天系列真空熔炼非热处理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐热合金精密铸件 |
Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Precision castings |
prEN 4096-1997 |
航空航天系列真空熔炼非热处理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐热合金再熔料 |
Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, non heat treated - Remelting stock |
prEN 4097-1997 |
航空航天系列真空熔炼沉淀处理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐热合金精密铸件 |
Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, precipitation treated - Precision castings |
prEN 4106-2001 |
航空航天系列非金属材料结构粘合剂系统膏壮粘合剂技术规范 |
Aerospace series - Non-metallic materials - Structural adhesive systems; Paste adhesive; Technical specification |
prEN 41216-1-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第1部分:ACSE规范、FTAM用表示和会话协议 |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 1: specification of ACSE, presentation and session protocols for the use by FTAM (ISO/IEC ISP 10607-1:1990, modified) |
prEN 41216-2-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第2部分:文件类型定义、约束集和语法 |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 2: definition of document types, constraint sets and syntaxes (ISO/IEC ISP 10607-2:1990 and its amendment 1:1991, modified) |
prEN 41216-3-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第3部分:AFT11单文卷传送服务(未结构化) |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 3: AFT 11; simple file transfer service (unstructured) (ISO/IEC ISP 10607-3:1990, modified) |
prEN 41216-4-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第4部分:AFT12定位文件传送服务(平面) |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 4: AFT 12; positional file transfer service (flat) (ISO/IEC ISP 10607-4:1991, modified) |
prEN 41216-5-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第5部分:AFT22定位文件访问服务(平面) |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 5: AFT 22; positional file access service (flat) (ISO/IEC ISP 10607-5:1991, modified) |
prEN 41216-6-1992 |
信息技术 国际标准化轮廓AFTnn 文件传送、访问和管理 第6部分:AFT3文件管理服务 |
Information technology; international standardized profiles AFTnn; file transfer, access and management; part 6: AFT 3; file management service (ISO/IEC ISP 10607-6:1991, modified) |
prEN 4127-1999 |
航空航天系列钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓等级:1100 MPa (环境温度)/425 ℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃ |
prEN 4128-1999 |
航空航天系列耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓等级:1250 MPa (环境温度)/ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃ |
prEN 413-1-2003 |
圬工用水泥 第1部分:规范 |
Masonry cement - Part 1: Composition, specification and conformity criteria / Note: Intended as replacement for ENV 413-1 (1994-11). |
prEN 416-2-2001 |
非家用单燃烧器的燃气高架辐射管加热器 第2部分:能量的合理使用 |
Single burner gas-fired overhead radiant-tube heaters for non-domestic use - Part 2: Rational use of energy |
prEN 4165-001-2001 |
航空航天系列连续操作温度在175℃、矩形模数电连接器第001部分:技术规范产品标准 |
Aerospace series - Connectors, electrical, rectangular, modular; Operating temperature 175℃ continuous - Part 001: Technical specification; Product standard |
prEN 4165-002-2001 |
航空航天系列连续操作温度在175℃、矩形模数电连接器第002部分:性能规范和连接排列 |
Aerospace series - Connectors, electrical, rectangular, modular; Operating temperature 175℃ continuous - Part 002: Specification of performance and contact arrangements |
prEN 4165-003-2001 |
航空航天系列连续操作温度在175℃、矩形模数电连接器第003部分:模数系列2、3产品标准 |
Aerospace series - Connectors, electrical, rectangular, modular; Operating temperature 175℃ continuous - Part 003: Modules series 2 and series 3; Product standard |
prEN 4165-004-2001 |
航空航天系列连续操作温度在175℃、矩形模数电连接器第004部分:可叠置安装2插孔和4插孔2模数系列 |
Aerospace series - Connectors, electrical, rectangular, modular; Operating temperature 175℃ continuous - Part 004: Stackable mounting receptacle 2 and 4 modules series 2 |
prEN 4165-005-2001 |
航空航天系列连续操作温度在175℃、矩形模数电连接器第005部分:可叠置安装2插孔和4插孔3模数系列 |
Aerospace series - Connectors, electrical, rectangular, modular; Operating temperature 175℃ continuous - Part 005: Stackable mounting receptacle 2 and 4 modules series 3 |
prEN 4172-1999 |
航空航天系列阳极氧化耐钛合金TI-P64001制突出头剪式紧公差锁紧螺栓米制等级::1100 MPa (环境温度) |
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
prEN 4173-1999 |
航空航天系列阳极氧化耐钛合金TI-P64001、100°埋头孔普通头剪式紧公差锁紧螺栓米制等级::1100 MPa |
Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
prEN 4174-1999 |
航空航天系列阳极氧化或铬酸盐处理铝合金 2024、铆紧剪式垫圈米制 |
Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
prEN 4175-1999 |
航空航天系列钛 TI-P99002、法兰式铆紧剪式垫圈米制 |
Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
prEN 4176-1999 |
航空航天系列阳极氧化或有铝色涂层钛合金TI-P64001、100°埋头标准头或突出头的张力剪式紧公差锁紧螺栓、 |
Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric |
prEN 419-2-2001 |
非家用燃气高架发光辐射加热器 第2部分:能量的合理使用 |
Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy |
prEN 4198-1998 |
航空航天系列耐腐蚀钢杆、有自动润滑衬垫和螺纹柄的可调自对中普通轴承活塞杆端尺寸和负荷 |
Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads |
prEN 4207-1999 |
标准号: |
中文标题: |
prEN 4234-1998 |
航空航天系列蜗杆驱动卡箍尺寸、质量 |
Aerospace series - Clamps, worm drive - Dimensions, masses |
prEN 4238-1998 |
航空航天系列纤维增强塑料干热对物理和机械特性的影响的测定 |
Aerospace series - Fibre reinforced plastics - Determination of the effect of dry heat on physical and mechanical characteristics |
prEN 4243-2001 |
航空航天系列注塑丙烯酸板材技术规范 |
Aerospace series - Cast acrylic sheets - Technical specification |
prEN 4259-2000 |
航空航天系列金属材料 一般术语的定义 |
Aerospace series - Metallic materials - Definition of general terms |
prEN 4272-1997 |
标准号: |
中文标题: |
prEN 4273-1997 |
标准号: |
中文标题: |
prEN 4274-1997 |
标准号: |
中文标题: |
prEN 4275-1997 |
标准号: |
中文标题: |
prEN 4276-1998 |
标准号: |
中文标题: |
prEN 4277-1998 |
标准号: |
中文标题: |
prEN 4278-1998 |
标准号: |
中文标题: |
prEN 4284-1998 |
标准号: |
中文标题: |
prEN 4285-1998 |
标准号: |
中文标题: |
prEN 4287-1998 |
航空航天系列铝合金 AL-P7010锻坯 |
Aerospace series - Aluminium alloy AL-P7010 - Forging stock |
prEN 4288-1998 |
航空航天系列铝合金 AL-P7050锻坯 |
Aerospace series - Aluminium alloy AL-P7050 - Forging stock |
prEN 4289-1998 |
航空航天系列铝合金 AL-P7175锻坯 |
Aerospace series - Aluminium alloy AL-P7175 - Forging stock |
prEN 4290-1998 |
航空航天系列铝合金 AL-P2219锻坯 |
Aerospace series - Aluminium alloy AL-P2219- - Forging stock |
prEN 4293-1998 |
标准号: |
中文标题: |
prEN 4294-1998 |
标准号: |
中文标题: |
prEN 4300-1998 |
航空航天系列发动机的打印标号设计标准 |
Aerospace series - Identification marking of engine items - Design standard |
prEN 4301-1998 |
航空航天系列发动机的打印标号工程要求 |
Aerospace series - Identification marking methods for engine items - Engineering requirements |
prEN 4303-1999 |
航空航天系列钝化耐腐蚀钢(0,25 mm 壁厚)制埋头的拉紧螺钉用套筒 |
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
prEN 4304-1999 |
航空航天系列钝化耐腐蚀钢(0,25 mm 壁厚)、带埋头的剪切螺纹用套筒 |
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
prEN 4306-1999 |
航空航天系列钝化耐腐蚀钢(0,50 mm 壁厚)、带埋头拉紧螺钉用套筒 |
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
prEN 4307-1999 |
航空航天系列钝化耐腐蚀钢(0,50 mm 壁厚)、带埋头剪切螺纹用套筒 |
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
prEN 4312-1999 |
航空航天系列带铝色涂层制耐热和耐腐蚀钢、松公差异径柄中等长度螺纹的双头螺栓等级:1100 MPa (常温 |
Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
prEN 4314-1997 |
标准号: |
中文标题: |
prEN 4317-2000 |
标准号: |
中文标题: |
prEN 4322-2003 |
prEN 4322-2003 |
|
prEN 4323-2003 |
prEN 4323-2003 |
|
prEN 4346-2000 |
标准号: |
中文标题: |
prEN 4347-2000 |
标准号: |
中文标题: |
prEN 4351-1997 |
航空航天系列耐腐蚀钢带自对中双排滚珠轴承和带螺纹柄的活塞杆端尺寸和负荷英制 |
Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series |
prEN 4352-2003 |
prEN 4352-2003 |
|
prEN 4354-2000 |
航空航天系列六角形凹槽发动机减压 |
Aerospace series - Six lobe recess - Drivers, relieved |
prEN 4355-2000 |
航空航天系列六角形凹槽全安起子 |
Aerospace series - Six lobe recess - Drivers, socket |
prEN 4356-2000 |
航空航天系列六角形凹槽短起子 |
Aerospace series - Six lobe recess - Drivers, short |
prEN 4357-2000 |
航空航天系列六角形凹槽手柄起子 |
Aerospace series - Six lobe recess - Drivers, handle |
prEN 4358-2000 |
航空航天系列六角形凹槽双端90起子 |
Aerospace series - Six lobe recess - Drivers, double ended, 90?国际标准分类号:49.030.99英文标准名称:Aerospace series - Six lobe recess - Drivers, double ended, 90? |
prEN 4359-2000 |
航空航天系列六角形凹槽起子技术规范 |
Aerospace series - Six lobe recesses - Drivers - Technical specification |
prEN 4360-2000 |
航空航天系列阳极氧化或铬酸盐处理铝合金 7050、制100°带圆顶短头实心铆钉米制 |
Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 7050, anodized or chromated - Metric series |
prEN 4361-2000 |
航空航天系列阳极氧化或铬酸盐处理铝合金 5056A、制100°带圆顶短头实心铆钉米制 |
Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 5056A, anodized or chromated - Metric series |
prEN 4362-1999 |
航空航天系列钛合金 Ti 44,5 Cb、制100°埋头短头实心铆钉米制 |
Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, metric series |
prEN 4363-1999 |
航空航天系列带铝色涂层钛合金 Ti 44,5 Cb、制100°埋头短头实心铆钉米制 |
Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series |
prEN 4364-2001 |
航空航天系列铸制丙烯酸物料性质 |
Aerospace series - Cast acrylic - Properties |
prEN 4365-2001 |
航空航天系列交联和低吸水耐热和耐开裂铸制丙烯酸物料性质 |
Aerospace series - Heat and crazing resistant cast acrylic, crosslinked, and low moisture absorption - Properties |
prEN 4366-2001 |
航空航天系列交联多轴向延伸和低吸水耐热和耐开裂铸制丙烯酸物料性质 |
Aerospace series - Heat and crazing resistant cast acrylic, crosslinked, multi-axially stretched, and low moisture absorption - Properties |
prEN 4367-2001 |
航空航天系列铸制丙烯酸板尺寸 |
Aerospace series - Cast acrylic sheets - Dimensions |
prEN 4368-1997 |
航空航天系列非热处理耐热合金 Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3)再熔化料 |
Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) non heat treated - Remelting stock |
prEN 4369-1997 |
标准号: |
中文标题: |
prEN 4370-1997 |
标准号: |
中文标题: |
prEN 4371-1997 |
标准号: |
中文标题: |
prEN 4372-1997 |
标准号: |
中文标题: |
prEN 4374-1997 |
标准号: |
中文标题: |
prEN 4375-1997 |
标准号: |
中文标题: |
prEN 4376-1997 |
标准号: |
中文标题: |
prEN 4377-1997 |
标准号: |
中文标题: |
prEN 4378-1997 |
标准号: |
中文标题: |
prEN 4379-1997 |
标准号: |
中文标题: |
prEN 438-1-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第1部分:介绍和一般信息 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
prEN 438-2-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第2部分:特性测定 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
prEN 438-3-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第3部分:胶接支撑下层用的少于2毫米厚的 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
prEN 438-4-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第4部分:厚度为2毫米或以上的压制层压板 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
prEN 438-5-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第5部分:少于2毫米厚的地板等级层压板分 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick |
prEN 438-6-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第6部分:厚度为2毫米或以上的表面等级压 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater |
prEN 438-7-2002 |
高压装饰层压板(HPL) 以热固树脂为基质的板(通常称为层压板) 第7部分:内外墙和天花板装饰用的压制层 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
prEN 4380-1997 |
标准号: |
中文标题: |
prEN 4383-1997 |
航空航天系列非热处理的耐热合金NI-CH2601(NiCr19FeNB5Mo3)再熔材料 |
Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) non heat treated - Remelting stock |
prEN 4384-1997 |
航空航天系列非热处理的耐热合金NI-CH1303(NiCo20Mo5Ti2Al)再熔材料 |
Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) non heat treated - Remelting stock |
prEN 4385-2001 |
航空航天系列非金属材料标准化的一般组织标准类型间的链接 |
Aerospace series - Non-metallic materials - General organisation of standardisation; Links between types of standards |
prEN 4387-1999 |
航空航天系列非金属材料技术规范起草和说明的规定 |
Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications |
prEN 4396-1999 |
航空航天系列FE-PA92HT(A286)制镀银耐热钢、自锁轴螺母 |
Aerospace series - Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
prEN 4399-1999 |
航空航天系列FE-PA92HT(A286)制镀银耐热钢的自锁螺纹式环件 |
Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
prEN 4400-1-1999 |
航空航天系列铝和铝合金锻制品技术规范第1部分:板材 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: Plate |
prEN 4400-2-2000 |
航空航天系列铝和铝合金锻制品技术规范第2部分:薄板、带材 |
Aerospace series - Aluminium and aluminium alloy wrought products; technical specification - Part 2: Sheet and strip |
prEN 4400-3-2001 |
航空航天系列铝和铝合金锻制品技术规范第3部分:棒材和型材 |
Aerospace series; Aluminium and aluminium alloy wrought products; Technical specification - Part 3: Bar and section |
prEN 4401-1999 |
航空航天系列米制有铝色涂层钛合金TI-P64001紧公差剪式突头锁紧螺栓等级:1100 MPa (常温)/315℃ |
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
prEN 4402-1999 |
航空航天系列米制有铝色涂层钛合金TI-P64001紧公差剪式100度埋头标准头锁紧螺栓等级:1100 MPa (常温)/ |
Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
prEN 4403-1999 |
航空航天系列有铝色涂层钛合金Ti44, 5 Cb100度埋头标准头实心铆钉米制 |
Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
prEN 4404-1999 |
航空航天系列有铝色涂层钛合金Ti44, 5 Cb通用头实心铆钉米制 |
Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
prEN 4406-2001 |
航空航天系列色漆和清漆耐磨两组份冷涂敷聚氨酯涂料 |
Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating, abrasion resistant |
prEN 4407-1997 |
航空航天系列有IVD铝涂层的钛合金全螺纹头标准六角螺栓等级:1100 MPa(常温)/315度 |
Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |