标准号 |
中文名称 |
英文名称 |
EN 50187-1996 |
大于1kV小于等于52kV额定电压的交流开关和控制装置用充气室 |
Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
EN 50189-2000 |
架空导线镀锌钢丝线 |
Conductors for overhead lines - Zinc coated steel wires |
EN 50191-2000 |
电气测试设备的安装和操作 |
Erection and operation of electrical test equipment |
EN 50193-1997 |
封闭式快速电水热器性能测量方法 |
Closed electrical instantaneous water heaters - Methods for measuring performance |
EN 50194-2000 |
探测房屋内易燃气体的电气装置测试方法及性能要求 |
Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements |
EN 50195-1996 |
已装满阿斯卡列电介液体的全封闭式电子设备的安全使用实施规程 |
Code of practice for the safe use of fully enclosed askarel-filled electrical equipment |
EN 502-1999 |
金属薄板材制成的屋顶产品 不锈钢薄板材全支撑屋顶产品规范 |
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
EN 50200-2000 |
用于紧急线路的非保护型小电缆的耐火性试验方法 |
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
EN 50201-2001 |
DVB-IRD接口 |
Interfaces for DVB-IRD |
EN 50205-2002 |
带强制定向(机械链接)触点的继电器 |
Relais with forcibly guided (mechanically linked) contacts |
EN 50206-1-1998 |
铁路设备机车车辆架式受电弓:特性试验第1部分:干线车辆用架式受电弓 |
Railway applications - Rolling stock - Pantographs: Characteristic tests - Part 1: Pantographs for main line vehicles |
EN 50206-2-1999 |
铁路设备机车车辆架式受电弓:特性试验第2部分:地铁和轻轨用架式受电弓 |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Panthographs for metros and light rail vehicles |
EN 50207-2000 |
铁路应用机车车辆电子功率转换器 |
Railway applications - Electronic power converters for rolling stock |
EN 50209-1998 |
高压机械用棒材和卷材的绝缘试验 |
Test of insulation of bars and coils of high-voltage machines |
EN 50212-1996 |
热电传感器用连接器 |
Connectors for thermoelectric sensors |
EN 50214-1997 |
升降机用柔软电缆 |
Flexible cables for lifts |
EN 50215-1999 |
铁路设备完工后和投入使用前机车车辆的试验 |
Railway applications - Testing of rolling stock after completion of construction and before entry into service |
EN 50216-1-2002 |
电源变压器及电抗器配件第1部分:总则 |
Power transformer and reactor fittings - Part 1: General |
EN 50216-2-2002 |
电源变压器及电抗器配件第2部分:带保油箱的充液式变压器和电抗器的气动和油动继电器 |
Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator |
EN 50216-4-2002 |
电源变压器及电抗器配件第4部分:主要配件(接地端子、排放和填充装置、温度计套和轮子) |
Power transformer and reactor fittings - Part 4: Basic accessoiries (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) |
EN 50216-6-2002 |
电源变压器及电抗器配件第6部分:冷却设备油渍变压器的可移动的辐射器 |
Power transformer and reactor fittings - Part 6: Cooling equipment; Removable radiators for oil-immersed transformers |
EN 50216-7-2002 |
电源变压器及电抗器配件第7部分:变压器油的电泵 |
Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil |
EN 50221-1997 |
存取条件和其它数字电视广播译码器用通用接口规范 |
Common interface specification for conditional access and other digital video broadcasting decoder applications |
EN 50223-2001 |
用于易燃绒屑材料自动的静电应用设备 |
Automatic electrostatic application equipment for flammable flock material |
EN 50225-1996 |
可能被PCBs污染的全封闭式充油电气设备的安全使用的实施规程 |
Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs |
EN 50229-2001 |
家用电动洗衣烘干机性能测试方法 |
Electric clothes washer-dryers for household use - Methods of measuring the performance |
EN 50237-1997 |
用于电气机械保护目的的手套和连指手套 |
Gloves and mitts with mechanical protection for electrical purposes |
EN 50238-2003 |
铁路应用机车车辆和火车探测系统的兼容性 |
Railway applications - Compatibility between rolling stock and train detection systems |
EN 50239-1999 |
铁路应用货运用牵引车辆的无线电遥控系统 |
Railway applications - Radio remote control system of traction vehicle for freight traffic |
EN 50241-1-1999 |
可燃或毒性气体和蒸气的检测用开路仪器规范 第1部分:一般要求和试验方法 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods |
EN 50241-1/A1-2004 |
可燃或毒性气体和蒸气的检测用开路仪器规范.第1部分:一般要求和试验方法 |
|
EN 50241-2-1999 |
可燃或毒性气体和蒸气的检测用开路仪器规范 第2部分:可燃气体检测用仪器的性能要求 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2: Performance requirements for apparatus for the detection of combustible gases |
EN 50243-2002 |
充液变压器24kV和36kV以及5kA和8kV的室外套管 |
Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers |
EN 50244-2000 |
家用易燃气体探测用电气设备选择、安装、使用和维修指南 |
Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance |
EN 50248-2001 |
数字音频广播接收机的特性 |
Characteristics of DAB receivers |
EN 50249-2002 |
地下管道和电缆的定位器性能与安全 |
Electromagnetic locators for buried pipes and cables - Performance and safety |
EN 50250-2002 |
工业用转换适配器 |
Conversion adapters for industrial use / Note: Includes Corrigendum of December 2002 (replaced Annex AA) |
EN 50254-1998 |
小数据包用高效通信子系统 |
High efficiency communication subsystem for small data packages |
EN 50256-1998 |
DVB接受器的特性 |
Characteristics of DVB receivers |
EN 50260-2-7-2002 |
手持电池供电的电动工具及电池组的安全性第2-7部分:喷射枪的特殊要求 |
Safety of hand-held battery-powered motor-operated tools and battery packs - Part 2-7: Particular requirements for spray guns |
EN 50261-1999 |
铁路设备电气设备规范 |
Railway applications - Mounting for electronic equipment |
EN 50263-1999 |
电磁兼容性(EMC)量值继电器和保护设备的产品标准 |
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
EN 50264-1-2002 |
铁路应用具有特殊放火性能的铁路机车车辆电缆标准外壁第1部分:基本要求 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements |
EN 50264-2-2002 |
铁路应用具有特殊放火性能的铁路机车车辆电缆标准外壁第2部分:单芯电缆 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables |
EN 50264-3-2002 |
铁路应用具有特殊放火性能的铁路机车车辆电缆标准外壁第3部分:多芯电缆 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables |
EN 50265-1-1998 |
在着火条件下电缆的一般测试方法单个绝缘导体或电缆耐火焰垂直传播试验第1部分:装置 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus |
EN 50265-2-1-1998 |
在着火条件下电缆的一般测试方法单个绝缘导体或电缆耐火焰垂直传播试验第2-1部分:方法1kW预混火焰 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame |
EN 50265-2-2-1998 |
在着火条件下电缆的一般测试方法单个绝缘导体或电缆耐火焰垂直传播试验第2-2部分:方法扩散火焰 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame |
EN 50266-1-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第1部分:装置 |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus |
EN 50266-2-1-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第2-1部分:程序A |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002 |
EN 50266-2-2-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第2-2部分:程序A |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002 |
EN 50266-2-3-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第2-3部分:程序B |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002 |
EN 50266-2-4-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第2-4部分:程序C |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002 |
EN 50266-2-5-2001 |
在着火条件下电缆的一般测试方法分布在垂直安装的胶合线或电缆四周的垂直火焰的试验第2-5部分:程序D |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002 |
EN 50267-1-1998 |
在着火条件下电缆的一般测试方法电缆材料燃烧过程中放出气体的试验第1部分:装置 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
EN 50267-2-1-1998 |
在着火条件下电缆的一般测试方法电缆材料燃烧过程中放出气体的试验第2-1部分:程序氢卤酸气体量的测 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
EN 50267-2-2-1998 |
在着火条件下电缆的一般测试方法电缆材料燃烧过程中放出气体的试验第2-2部分:程序通过测量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
EN 50267-2-3-1998 |
在着火条件下电缆的一般测试方法电缆材料燃烧过程中放出气体的试验第2-3部分:程序通过测量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and con |
EN 50268-1-1999 |
在燃烧条件下电缆的一般试验方法在规定条件下电缆燃烧烟密度测量第1部分:仪器 |
Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
EN 50268-2-1999 |
在燃烧条件下电缆的一般试验方法在规定条件下电缆燃烧烟密度测量第2部分:程序 |
Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
EN 50270-1999 |
电磁兼容性探测和测量易燃气体、有毒气体或氧气的电气装置 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50271-2001 |
探测和测量易燃气体、有毒气体或氧气的电气装置使用软件和(或)数字技术装置的要求和测试 |
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
EN 50272-2-2001 |
对次级蓄电池和安装蓄电池的安全要求第2部分:固定蓄电池 |
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
EN 50272-3-2002 |
对次级蓄电池和安装蓄电池的安全要求第3部分:牵引蓄电池 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
EN 50274-2002 |
低压开关和控制机构组件防电震防无意直接接触带电部分的保护 |
Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts |
EN 50281-1-2-1998 |
用于可燃性尘埃存在时的电气设备第1-2部分:用外壳保护的电气设备选择安装和维护 |
Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures - Selection, installation and maintenance |
EN 50281-2-1-1998 |
用于可燃性尘埃存在时的电气设备第2-1部分:试验方法尘埃最低着火温度的测定方法 |
Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods of determining the minimum ignition temperature of dust |
EN 50281-3-2002 |
用于有易燃性粉尘场所的设备第3部分:有或可能有易燃性粉尘地区的分类 |
Equipment for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present |
EN 50284-1999 |
1G类II组仪器的电气设备的结构测试和标志的特殊要求 |
Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G |
EN 50285-1999 |
家用电子灯的能量效果测量方法 |
Energy efficiency of electric lamps for household use - Measurement methods |
EN 50286-1999 |
低压设施的电气绝缘保护套 |
Electrical insulating protective clothing for low-voltage installations |
EN 50288-1-2001 |
模拟和数字通信和管理中使用的多金属电缆第1部分:通用规范 |
Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification |
EN 50288-2-1-2001 |
模拟和数字通信和管理中使用的多金属电缆第2-1部分:表征100 MHz以上的屏蔽电缆的部分规范水平及建筑 |
Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables |
EN 50288-2-2-2001 |
电缆和数字通信和管理中用的多芯金属电缆第2-2部分:特征频率达100 MHz屏蔽电缆的部分规范工作区和中继 |
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables |
EN 50288-3-1-2001 |
模拟和数字通信和管理中使用的多金属电缆第3-1部分:表征100 MHz以上的未屏蔽电缆的部分规范水平及建 |
Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables |
EN 50288-3-2-2001 |
模拟和数字通信和管理中使用的多金属电缆第3-2部分:表征100 MHz以上的未屏蔽电缆的部分规范工作区和 |
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables |
EN 50288-4-1-2001 |
模拟和数字通信和管理中使用的多金属电缆第4-1部分:表征600 MHz以上的屏蔽电缆的部分规范水平及建筑 |
Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables |
EN 50288-4-2-2001 |
模拟和数字通信和管理中使用的多金属电缆第4-2部分:表征600 MHz以上的屏蔽电缆的部分规范工作区和局 |
Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables |
EN 50289-1-1-2001 |
通信电缆试验方法规范第1-1部分:电气试验方法基本要求 |
Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements |
EN 50289-1-10-2001 |
通信电缆试验方法规范第1-10部分:电气试验方法串音 |
Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1 |
EN 50289-1-11-2001 |
通信电缆试验方法规范第1-11部分:电气试验方法特征阻抗输入阻抗回波损耗 |
Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1 |
EN 50289-1-13-2004 |
通信电缆.试验方法规范.第1-13部分:电气试验方法.接插线/同轴电缆配件/预连接电缆的耦合衰减或屏蔽衰减 |
|
EN 50289-1-14-2004 |
通信电缆.试验方法规范.第1-14部分:连接硬件的耦合衰减或屏蔽衰减 |
|
EN 50289-1-15-2004 |
通信电缆.试验方法规范.第1-15部分:电磁性能.链路和信道的耦合衰减(实验室条件) |
|
EN 50289-1-2-2001 |
通信电缆试验方法规范第1-2部分:电气试验方法DC电阻 |
Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance |
EN 50289-1-3-2001 |
通信电缆试验方法规范第1-3部分:电气试验方法绝缘强度 |
Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength |
EN 50289-1-4-2001 |
通信电缆试验方法规范第1-4部分:电气试验方法绝缘电阻 |
Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-5-2001 |
通信电缆试验方法规范第1-5部分:电气试验方法电容 |
Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-6-2002 |
通信电缆试验方法规范第1-6部分:电气试验方法电磁性能 |
Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-7-2001 |
通信电缆试验方法规范第1-7部分:电气试验方法传播速度 |
Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-8-2001 |
通信电缆试验方法规范第1-8部分:电气试验方法衰减 |
Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-9-2001 |
通信电缆试验方法规范第1-9部分:电气试验方法衰减不平衡(纵向转换损失、纵向转换传递损失) |
Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
EN 50289-3-1-2001 |
通信电缆试验方法规范第3-1部分:机械试验方法基本要求 |
Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements |
EN 50289-3-11-2001 |
通信电缆试验方法规范第3-11部分:机械试验方法电缆耐切断性 |
Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance |
EN 50289-3-12-2001 |
通信电缆试验方法规范第3-12部分:机械试验方法强迫性损伤 |
Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage |
EN 50289-3-13-2003 |
通信电缆试验方法的规范第3-13部分:机械试验方法风蚀振动 |
Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-15-2003 |
通信电缆试验方法规范第3-15部分:机械试验方法水下电缆耐液压/注意:和EN 50289-3-1联合使用 |
Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-16-2001 |
通信电缆试验方法规范第3-16部分:机械试验方法电缆拉力性能 |
Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance |
EN 50289-3-17-2002 |
通信电缆试验方法规范第3-17部分:机械试验方法绝缘材料和包皮的粘合力 |
Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-2-2001 |
通信电缆试验方法规范第3-2部分:机械试验方法导体的抗拉强度和延展性 |
Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor |
EN 50289-3-4-2001 |
通信电缆试验方法规范第3-4部分:机械试验方法绝缘体和包层的抗拉强度延展性和收缩性 |
Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath |
EN 50289-3-5-2001 |
通信电缆试验方法规范第3-5部分:机械试验方法电缆的抗挤压性 |
Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable |
EN 50289-3-6-2001 |
通信电缆试验方法规范第3-6部分:机械试验方法电缆的抗冲击性 |
Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable |
EN 50289-3-7-2001 |
通信电缆试验方法规范第3-7部分:机械试验方法电缆包皮的耐腐蚀性 |
Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath |
EN 50289-3-8-2001 |
通信电缆试验方法规范第3-8部分:机械试验方法电缆包皮标志的耐腐蚀性 |
Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings |
EN 50289-3-9-2001 |
通信电缆试验方法规范第3-9部分:机械试验方法弯曲试验 |
Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests |
EN 50289-4-1-2001 |
通信电缆试验方法规范第4-1部分:环境试验方法基本要求 |
Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements |
EN 50289-4-11-2002 |
通信电缆试验方法规范第4-11部分:环境试验方法汇集在水平方向上的耐火试验 |
Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method |
EN 50289-4-12-2004 |
通信电缆.试验方法规范.第4-12部分:环境试验方法.小型束状电缆上的垂直火焰扩散试验 |
|
EN 50289-4-14-2003 |
通信电缆试验方法的规范第3-14部分:环境试验方法闪电 |
Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-4-2-2001 |
通信电缆试验方法规范第4-2部分:环境试验方法浸水 |
Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration |
EN 50289-4-6-2001 |
通信电缆试验方法规范第4-6部分:环境试验方法温度的周期性变化 |
Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling |
EN 50289-4-9-2001 |
通信电缆试验方法规范第4-9部分:环境试验方法耐气压试验 |
Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance |
EN 50290-1-1-2001 |
通信电信第1-1部分:通用的设计原理及结构总则 |
Communication cables - Part 1-1: General |
EN 50290-1-2-2004 |
通信电缆.第1-2部分:定义 |
|
EN 50290-2-20-2001 |
通信电缆第2-20部分:通用的设计原理及结构总则 |
Communication cables - Part 2-20: Common design rules and construction; General |
EN 50290-2-21-2001 |
通信电缆第2-21部分:通用的设计原理及结构PVC绝缘化合物 |
Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds |
EN 50290-2-22-2001 |
通信电缆第2-22部分:通用的设计原则及结构PVC包皮化合物 |
Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds |
EN 50290-2-23-2001 |
通信电缆第2-23部分:通用的设计原理及结构PE绝缘体 |
Communication cables - Part 2-23: Common design rules and construction; PE insulation |
EN 50290-2-24-2002 |
通信电缆第2-24部分:通用的设计原理及结构PE包皮 |
Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20 |