标准号 |
中文名称 |
英文名称 |
| EN 10276-2-2003 |
钢铁材料的化学分析钢和铁中氧的测定第2部分：在惰性气体条件下熔融后用红外光谱法测定 |
Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas |
| EN 10277-1-1999 |
光亮型钢材交货技术条件第1部分：总则 |
Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10277-2-1999 |
光亮型钢材交货技术条件第2部分：一般工程用途钢 |
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes |
| EN 10277-3-1999 |
光亮型钢材交货技术条件第3部分：无切削钢 |
Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels |
| EN 10277-4-1999 |
光亮型钢材交货技术条件第4部分：表面硬化钢 |
Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels |
| EN 10277-5-1999 |
光亮型钢材交货技术条件第5部分：淬火和回火钢 |
Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering |
| EN 10278-1999 |
光亮型钢材的尺寸和公差 |
Dimensions and tolerances of bright steel products |
| EN 10279-2000 |
热轧槽钢形状、尺寸和质量的公差 |
Hot rolled steel channels - Tolerances on shape, dimensions and mass |
| EN 1028-1-2002 |
消防泵 带起动器的消防离心泵 第1部分：分类 一般和安全要求 |
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements |
| EN 1028-2-2002 |
消防泵 带起动器的消防离心泵 第2部分：一般和安全要求的验证 |
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
| EN 10280-2001 |
磁性材料用简单薄板试验机测量电工薄板和带材磁特性的方法 |
Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| EN 10282-2001 |
磁性材料电工板材和带材的表面绝缘电阻的测试方法 |
Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 10283-1998 |
耐腐蚀铸钢件 |
Corrosion resistant steel castings |
| EN 10284-2000 |
聚乙烯管路系统用带压缩端部的可锻铸铁配件 |
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| EN 10288-2002 |
岸上和海上管路钢管及配件外表两层喷涂聚乙烯底化 |
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 10289-2002 |
岸上和海上管路钢管及配件加有环氧树脂和改性环氧树脂胶的外用液体 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| EN 10290-2002 |
岸上和海上管路钢管及配件加有聚氨脂和改性聚氨脂胶的外用液体 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 10291-2000 |
金属材料单轴蠕变拉力试验试验方法 |
Metallic materials - Uniaxial creep testing in tension - Method of test |
| EN 10295-2002 |
耐热钢铸件 |
Heat resistant steel castings |
| EN 10296-1-2003 |
机械和一般工程用途的焊接圆形钢管交货技术条件第1部分：非合金钢管和合金钢管 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10297-1-2003 |
机械和一般工程用途的无缝圆形钢管交货技术条件第1部分：非合金钢管和合金钢管 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10301-2003 |
岸上和海上管路钢管及配件减小非腐蚀性气体输送摩擦力的内涂层 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| EN 10302-2002 |
抗蠕变钢、镍和钴合金 |
Creep resisting steels, nickel and cobalt alloys |
| EN 10303-2001 |
中频用薄磁钢板和钢带 |
Thin magnetic steel sheet and strip for use at medium frequencies |
| EN 10304-2001 |
继电器用磁性材料（铁和钢） |
Magnetic materials (iron and steel) for use in relays |
| EN 10305-1-2002 |
高精密度用途的钢管交货技术条件第1部分：冷拔无缝钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10305-2-2002 |
高精密度用途的钢管交货技术条件第2部分：冷拔焊接钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10305-3-2002 |
高精密度用途的钢管交货技术条件第3部分：冷定径焊接钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10305-4-2003 |
高精密度用途的钢管交货技术条件第4部分：液压和气动系统用冷拔无缝钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10305-5-2003 |
高精密度用途的钢管交货技术条件第5部分：冷定径方形和矩形焊接钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
| EN 10306-2001 |
钢铁带平行法兰的H钢梁和IPE钢梁的超声波检验 |
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
| EN 10307-2001 |
无损检测厚度等于或大于6mm的奥氏体和奥氏体铁素不锈钢板材的超声波检验（反射式探伤法） |
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| EN 10308-2001 |
无损检测钢棒的超声波检测 |
Non destructive testing - Ultrasonic testing of steel bars |
| EN 10312-2002 |
传送人类消耗的含水液体（包括水）的焊焊接不锈钢管 交货技术条件 |
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
| EN 10314-2002 |
高温下钢的校验强度最小值的推导方法 |
Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN 10319-1-2003 |
金属材料拉应力松弛试验 第1部分：机械试验程序 |
Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines |
| EN 1032-2003 |
机械振动 为测定人整体振动发送值的可移动机械试验 总则 |
Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| EN 10323-2004 |
钢丝和钢丝制品.轮胎钢丝 |
|
| EN 10324-2004 |
钢丝和钢丝制品.软管加筋线 |
|
| EN 10326-2004 |
连续热浸涂覆带钢和结构钢板材.交货技术条件 |
|
| EN 10327-2004 |
连续热浸涂覆带钢和冷成形低碳钢板材.交货技术条件 |
|
| EN 1033-1995 |
手臂振动 手操纵机器把手平面振动的试验室测量 概述 |
Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General |
| EN 10330-2003 |
磁性材料 开口磁路中磁性材料矫顽力的测量方法 |
Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit |
| EN 10331-2003 |
磁性材料 烧结的软磁性材料规范 |
Magnetic materials - Specification for sintered soft magnetic materials |
| EN 10332-2003 |
磁性材料 永磁(硬磁性)材料 磁性能的测量方法 |
Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties |
| EN 1034-1-2000 |
机械安全 造纸机械和精整机的设计和建造安全要求 第1部分：通用要求 |
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| EN 1034-3-1999 |
机械安全 造纸机械和精整机的设计和建造安全要求 第3部分：卷纸机、纵切机和绞合机 |
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines |
| EN 1035-1998 |
鞣皮机 移动平整机 安全要求 |
Tannery machines - Moving platen machinery - Safety requirements |
| EN 1036-1999 |
建筑物玻璃 由镀银浮法玻璃制成的室内用镜子 |
Glass in building - Mirrors from silver-coated float glass for internal use |
| EN 1037-1995 |
机械安全 避免意外起动 |
Safety of machinery - Prevention of unexpected start-up |
| EN 1038-1995 |
识别卡系统 适用于远程通信 卡式计费电话的集成电路 |
Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone |
| EN 1040-1997 |
化学消毒剂和防腐剂 基本消毒活性 试验方法和要求（第1期） |
Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1) |
| EN 1041-1998 |
厂商提供的医疗设备信息 |
Information supplied by the manufacturer with medical devices |
| EN 1043-1-1995 |
金属材料焊接的破坏试验 硬度测试 第1部分：电弧焊接连接件的硬度试验 |
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 1043-2-1996 |
金属材料焊接的破坏试验 硬度试验 第2部分：焊接连接件的显微硬度测试 |
Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints |
| EN 1044-1999 |
硬焊 焊条 |
Brazing - Filler metals |
| EN 1045-1997 |
硬焊 硬焊用熔剂 分类和交货技术条件 |
Brazing - Fluxes for brazing - Classification and technical delivery conditions |
| EN 1047-1-1996 |
安全存储装置 耐火试验方法和分类 第1部分： 数据柜 |
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets |
| EN 1047-2-1999 |
安全存储装置 耐火试验方法和分类 第2部分：数据室和数据容器 |
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data containers |
| EN 1048-1998 |
热交换器 空气冷化液体冷却器干冷却器 确定性能的试验方法 |
Heat exchangers - Air cooled liquid coolers dry coolers - Test methods for establishing the performance |
| EN 1049-2-1993 |
纺织品 织物、构造、分析方法 第2部分：每单位长度线数的测定 |
Textiles; woven fabrics; construction; methods of analysis; part 2: determination of number of threads per unit length (ISO 7211-2:1984 modified) |
| EN 1050-1996 |
机械安全 危害评估原则 |
Safety of machinery - Principles for risk assessment |
| EN 1051-1-2003 |
建筑物用玻璃 玻璃地垫和玻璃地砖 第1部分：种类和定义 |
Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description |
| EN 1052-1-1998 |
圬工用试验方法 第1部分：压缩强度的测定 |
Methods of test for masonry - Part 1: Determination of compressive strength |
| EN 1052-2-1999 |
圬工用试验方法 第2部分：挠曲强度的测定 |
Methods of test for masonry - Part 2: Determination of flexural strength |
| EN 1052-3-2002 |
圬工用试验方法 第3部分：初始剪切强度的测定 |
Methods of test for masonry - Part 3: Determination of initial shear strength |
| EN 1052-4-2000 |
圬工用试验方法 第4部分：包括防湿层的剪切强度的测定 |
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
| EN 1053-1995 |
塑料管道系统 无压力情况下使用的热塑管道系统 水密封性的试验方法 |
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
| EN 1054-1995 |
塑料管道系统 粪便和污水排放用热塑管道系统 连接件气密性试验方法 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
| EN 1055-1996 |
塑料管道系统 建筑物内粪便和污水排放用热塑管道系统 抗周期性升温的试验方法 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
| EN 1057-1996 |
铜和铜合金 在卫生和加热器中输送水和气体用无缝圆铜管 |
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1058-1995 |
木基板 机械性能和密度特性值的测定 |
Wood based panels - Determination of characteristic values of mechanical properties and density |
| EN 1059-1999 |
木材结构 用穿孔金属板紧固件的预制桁架的产品要求 |
Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners |
| EN 1060-2-1995 |
非侵入式血压计 第2部分：机械血压计的补充要求 |
Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers |
| EN 1060-3-1997 |
非侵入式血压计 第3部分：电动机械血压测量系统的补充要求 |
Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems |
| EN 1060-4-2004 |
非介入式血压计.第4部分:自动非介入式血压计整体系统精确度测定的试验过程 |
|
| EN 1062-1-1996 |
涂料和清漆 外部圬工和混凝土用覆层材料和涂覆系统 第1部分：分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification |
| EN 1062-1-2004 |
色漆和清漆.外部砖石和混凝土用涂层材料和涂层系统.第1部分:分类 |
|
| EN 1062-11-2002 |
涂料和清漆 外部圬工和混凝土用覆层材料和涂覆系统 第11部分：测试前调节方法 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing |
| EN 1062-3-1998 |
涂料和清漆 外部圬工和混凝土用覆层材料和涂覆系统 第3部分：液水传输比率（渗透性）的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability) |
| EN 1062-6-2002 |
涂料和清漆 外部圬工和混凝土用覆层材料和涂覆系统 第6部分：二氧化碳渗透性测定 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN 1062-7-2004 |
清漆和涂料.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂缝遮避性能的测定 |
|
| EN 1063-1999 |
建筑物用玻璃 玻璃件安全性 抗子弹冲击的测试和分类 |
Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 1065-1998 |
可调节套筒式钢脚手架 产品规范、设计和通过计算和试验进行的评估 |
Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
| EN 1066-1997 |
粘合胶剂 取样 |
Adhesives - Sampling |
| EN 1067-1997 |
粘胶剂 测试样品的检验和准备 |
Adhesives - Examination and preparation of samples for testing |
| EN 1069-1-2000 |
高度在2m以上的水滑道 第1部分：安全要求和试验方法 |
Water slides of 2 m height and more - Part 1: Safety requirements and test methods |
| EN 1069-2-1999 |
高度在2M及其以上的水滑道 第2部分：说明 |
Water slides of 2 m height and more - Part 2: Instructions |
| EN 107-1980 |
窗户测试方法 机械试验 |
Methods of testing windows; Mechanical test |
| EN 1070-1998 |
机械安全 术语 |
Safety of machinery - Terminology |
| EN 1071-1-2003 |
先进技术陶瓷 陶瓷涂层用试验方法 第1部分：用接触探针表面光度仪测定涂层厚度 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer |
| EN 1071-2-2002 |
先进技术陶瓷 陶瓷涂层用试验方法 第2部分：用滴坑磨碎法测定涂层厚度 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
| EN 1072-1995 |
胶合板 结构胶合板弯曲特性的描述 |
Plywood - Description of bending properties for structural plywood |
| EN 1073-1-1998 |
防放射性污染的防护服装 第1部分：用于防止微粒放射性污染的可通风防护服装的要求和试验方法 |
Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination |
| EN 1073-2-2002 |
防放射性污染的防护服装 第2部分：用于防止微粒放射性污染的不通风防护服装的要求和试验方法 |
Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| EN 1074-1-2000 |
供水阀门 目的要求的适应性和合适的认证试验 第1部分：一般要求 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN 1074-2-2000 |
供水阀门 目的要求的适应性和合适的认证试验 第2部分：绝热阀门 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
| EN 1074-2-2004 |
供水用阀门.适用性要求和适当的验证试验.第2部分:隔离阀 |
|
| EN 1074-3-2000 |
供水阀门 目的要求的适应性和合适的认证试验 第3部分：检查阀门 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves |
| EN 1074-4-2000 |
供水阀门 目的要求的适应性和合适的认证试验 第4部分：气体阀门 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves |
| EN 1074-5-2001 |
供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
| EN 1074-6-2004 |
供水用阀门.适用性要求和相应的检查试验.第6部分:给水栓 |
|
| EN 1075-1999 |
木材结构 试验方法 用冲击金属板紧固件制造的连接件 |
Timber structures - Test methods - Joints made with punched metal plate fasteners |
| EN 1077-1996 |
高山滑雪者用防护帽 |
Helmets for alpine skiers |
| EN 1078-1997 |
骑自行车的人和滑板及旱冰鞋使用者用防护帽 |
Helmets for pedal cyclists and for users of skateboards and roller skates |
| EN 1081-1998 |
弹性地板覆盖物 电阻的测定 |
Resilient floor coverings - Determination of the electrical resistance |
| EN 1082-1-1996 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第1部分：链式盔甲手套和手臂防护物 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards |
| EN 1082-2-2000 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第2部分：除链式盔甲外其它材料制作的手套和手臂防护物 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail |
| EN 1082-3-2000 |
防护服 防手工刀具砍中和刺中的手套和手臂防护物 第3部分：织物、皮革和其它材料的冲击切割试验 |
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials |
| EN 1083-1-1997 |
电刷 第1部分：定义和术语 |
Power-driven brushes - Part 1: Definitions and nomenclature |
| EN 1083-2-1997 |
电刷 第2部分：安全要求 |
Power-driven brushes- Part 2: Safety requirements |
| EN 1084-1995 |
胶合板 用气体分析法测定甲醛释放级别 |
Plywood - Formaldehyde release classes determined by the gas analysis method |
| EN 1085-1997 |
废水处理 词汇 |
Wastewater treatment - Vocabulary |
| EN 1086-1995 |
食品运输袋 袋型选择和涉及包装物内袋的推荐规范 |
Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed |
| EN 1087-1-1995 |
碎料板 耐湿测定 第1部分：煮沸试验 |
Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 1088-1995 |
机械安全 和保护装置相连的锁紧装置 设计和选择的原则 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 1089-1-1996 |
可运输气瓶 储气瓶的识别（不包括液化石油气） 第1部分：加印 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 1: Stampmarking |
| EN 1089-2-2002 |
可运输气瓶 储气瓶的识别（不包括液化石油气） 第2部分：预防性标签 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels |
| EN 1089-3-2004 |
可移动式气瓶.气瓶标识(不包括LPG).第3部分:色码 |
|
| EN 1091-1996 |
建筑物外真空排水系统 |
Vacuum sewerage systems outside buildings |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com