标准号 |
中文名称 |
英文名称 |
EN 1243-1998 |
粘合剂 氨基和酰氨基甲醛冷凝剂中游离甲醛的测定 |
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
EN 12430-1998 |
建筑物保温制品点载荷下性能测定 |
Thermal insulating products for building applications - Determination of behaviour under point load |
EN 12431-1998 |
建筑物保温制品活动地板保温制品厚度的测定 |
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
EN 12432-1998 |
体操器械平衡木功能和安全要求、试验方法 |
Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods |
EN 12433-1-1999 |
工业、商业和车库门、大门术语第1部分:门类型 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
EN 12433-2-1999 |
工业、商业和车库门、大门术语第2部分:门部件 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
EN 12436-2001 |
承重木结构用粘合剂干酪素粘合剂分类和性能要求 |
Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
EN 12438-1998 |
镁和镁合金铸造阳极用镁合金 |
Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
EN 12439-1998 |
一次性灭菌直肠导管 |
Sterile rectal catheters for single use |
EN 1244-1998 |
粘合剂 灯光影响下胶粘剂覆层颜色和/或颜色变化的测定 |
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
EN 12440-2000 |
天然石料命名准则 |
Natural stone - Denomination criteria |
EN 12441-1-2001 |
锌和锌合金化学分析第1部分:锌合金中铝的测定滴定法 |
Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method |
EN 12441-1-2004 |
锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法 |
|
EN 12441-2-2001 |
锌和锌合金化学分析第2部分:锌合金中镁的测定火焰原子吸收光谱法 |
Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric method |
EN 12441-3-2001 |
锌和锌合金化学分析第3部分:铅、镉和铜的测定火焰原子吸收光谱法 |
Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method |
EN 12441-4-2003 |
锌和锌合金化学分析第4部分:用分光光度法测定锌合金中的铁 |
Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys; Spectrophotometric method |
EN 12441-5-2003 |
锌和锌合金化学分析第5部分:用分光光度法测定原生锌中的铁 |
Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc; Spectrophotometric method |
EN 12441-6-2003 |
锌和锌合金化学分析第6部分:用原子吸收光谱法测定铝和铁 |
Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method |
EN 12442-1-2000 |
医疗设备制造中使用的动物组织及其衍生物第1部分:风险分析和管理 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk |
EN 12442-2-2000 |
医疗设备制造中使用的动物组织及其衍生物第2部分:来源采集和处理的控制 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling |
EN 12442-3-2000 |
医疗设备制造中使用的动物组织及其衍生物第3部分:病毒和传染性试剂消除和/或钝化的验证 |
Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents |
EN 12444-2000 |
工业、商业和车库门、大门抗风荷载能力试验和计算 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
EN 12445-2000 |
工业、商业和车库门、大门电动门使用安全性试验方法 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
EN 12446-2003 |
烟囱构件混凝土外墙构件 |
Chimneys - Components - Concrete outer wall elements |
EN 12447-2001 |
土工织物及其相关产品测定水中耐水解性的筛选试验法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
EN 12449-1999 |
铜和铜合金通用无缝圆管 |
Copper and copper alloys - Seamless, round tubes for general purposes |
EN 1245-1998 |
粘合剂 pH值的测定 试验方法 |
Adhesives - Determination of pH - Test method |
EN 12450-1999 |
铜和铜合金无缝圆铜毛细管 |
Copper and copper alloys - Seamless, round copper capillary tubes |
EN 12451-1999 |
铜和铜合金热交换器用无缝圆管 |
Copper and copper alloys - Seamless, round tubes for heat exchangers |
EN 12452-1999 |
铜和铜合金热交换器用轧制翅片无缝管 |
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
EN 12453-2000 |
工业、商业和车库门、大门电动门使用安全性要求 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements |
EN 12454-1998 |
铸造表面不连续性的目测钢砂铸件 |
Founding - Visual examination of surface discontinuities - Steel sand castings |
EN 12455-1999 |
弹性地板覆盖物软木衬底规范 |
Resilient floor coverings - Specification for corkment underlay |
EN 12457-1-2002 |
废物特性浸出粒状废料和残渣浸出的符合性试验第1部分:在2 l/kg的液固比下对高固体含量和粒子尺寸小 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou |
EN 12457-2-2002 |
废物特性浸出粒状废料和残渣浸出的符合性试验第2部分:在10 l/kg的液固比下对粒子尺寸小于4mm的(没 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for material with particle size below 4 mm (without or with size reduction) |
EN 12457-3-2002 |
废物特性浸出粒状废料和残渣浸出的符合性试验第3部分:在2 l/kg和8 l/kg的液固比下对高固体含量和粒 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 |
EN 12457-4-2002 |
废物特性浸出粒状废料和残渣浸出的符合性试验第4部分:在10 l/kg的液固比下对粒子尺寸小于10mm的(没 |
Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
EN 12458-1999 |
表面活性剂硬水中稳定性的测定 |
Surface active agents - Determination of stability in hard water |
EN 1246-1998 |
粘合剂 灰分和硫酸盐灰分测定 |
Adhesives - Determination of ash and sulphated ash |
EN 12460-1998 |
生物技术大规模加工和生产根据生物风险选择和安装设备指南 |
Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk |
EN 12461-1998 |
生物技术大规模加工和生产废物处理、钝化和测试指南 |
Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste |
EN 12462-1998 |
生物技术泵性能标准 |
Biotechnology - Performance criteria for pumps |
EN 12463-2004 |
食品加工机械.填充和辅助机器.安全和卫生要求 |
|
EN 12464-1-2002 |
照明设备工作场所照明 室内工作场所 |
Light and lighting - Lighting of work places - Part 1: Indoor work places |
EN 12465-2001 |
高架线木杆耐久性要求 |
Wood poles for overhead lines - Durability requirements |
EN 12466-1998 |
弹性地板覆盖物词汇 |
Resilient floor coverings - Vocabulary |
EN 12468-1997 |
生物技术用于环境的改良生物遗传变性植物审慎释放监测战略指南 |
Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants |
EN 12469-2000 |
生物技术微生物安全柜的性能标准 |
Biotechnology - Performance criteria for microbiological safety cabinets |
EN 1247-2004 |
铸造机械.戽斗、浇注设备、离心铸造机、连续和半连续铸造机的安全要求 |
|
EN 12470-1-2000 |
临床温度计第1部分:配备最大器件的金属玻璃中液体体温计 |
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
EN 12470-2-2000 |
临床温度计第2部分:相变型(点阵)温度计 |
Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
EN 12470-3-2000 |
临床温度计配备最大器件的小型电子温度计(非预测式和预测式)的性能 |
Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
EN 12470-4-2000 |
临床温度计第4部分:用于连续测量的电子温度计的性能 |
Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
EN 12470-5-2003 |
临床温度计第5部分:红外耳状温度计(配备最大器件)的性能 |
Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
EN 12472-1998 |
用于检测涂覆物中释放的镍的腐蚀和磨损模拟 |
Method for the simulation of wear and corrosion for the detection of nickel release from coated items |
EN 12473-2000 |
海水中阴极保护的一般原则 |
General principles of cathodic protection in sea water |
EN 12474-2001 |
水下管道的阴极保护 |
Cathodic protection of submarine pipelines |
EN 12475-1-1998 |
致密成形型耐火制品的分类第1部分:硅酸铝制品 |
Classification of dense shaped refractory products - Part 1: Aluminia-silica products |
EN 12475-2-1998 |
致密成形型耐火制品的分类第2部分:残留碳小于7%的基本制品 |
Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon |
EN 12475-3-1998 |
致密成形型耐火制品的分类第3部分:残留碳为7%-30%的基本制品 |
Classification of dense shaped refractory products - Part 3: Basic products containing from 7 % to 30 % residual carbon |
EN 12475-4-1998 |
致密成形型耐火制品的分类第4部分:特殊制品 |
Classification of dense shaped refractory products - Part 4: Special products |
EN 12476-2000 |
金属磷酸盐转化膜制定要求的方法 |
Phosphate conversion coatings of metals - Method of specifying requirements |
EN 12477-2001 |
焊工防护手套 |
Protective gloves for welders |
EN 12479-2001 |
高架线木杆尺寸测量方法和容许偏差 |
Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations |
EN 1248-2001 |
铸造机械 喷砂设备的安全要求 |
Foundry machinery - Safety requirements for abrasive blasting equipment |
EN 12480-2002 |
气量计旋转置换气量计 |
Gas meters - Rotary displacement gas meters |
EN 12481-2000 |
自粘带术语 |
Self adhesive tapes - Terminology |
EN 12482-1-1998 |
铝和铝合金一般用重轧坯料第1部分: 热轧重轧坯料规范 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
EN 12482-2-1998 |
铝和铝合金一般用重轧坯料第2部分:冷轧重轧坯料规范 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
EN 12483-1999 |
液体泵带频率转换器的泵设备保证和兼容性试验 |
Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
EN 12484-1-1999 |
灌溉技术自动草坪灌溉系统第一部分:业主对设备程序的定义 |
Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment by the owner |
EN 12484-2-2000 |
灌溉技术自动草坪灌溉系统第2部分:典型技术模板的设计和定义 |
Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates |
EN 12484-3-2000 |
灌溉技术自动草坪灌溉系统第3部分:自动控制和系统管理 |
Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management |
EN 12484-4-2002 |
灌溉技术自动草坪灌溉系统第4部分:验收和安装 |
Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance |
EN 12484-5-2002 |
灌溉技术自动草坪灌溉系统第5部分:测试方法 |
Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems |
EN 12485-2001 |
人类生活水的水处理用化学品碳酸钙高钙石灰和半锻烧百云石试验方法 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods |
EN 12487-2000 |
金属的防腐蚀铝和铝合金上清洗和非清洗的铬酸盐转化镀层 |
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
EN 12489-2000 |
企业、商业和车库用大门以及活动门防水渗透性试验方法 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
EN 12490-1998 |
木材和木材制品的耐用性防腐处理实心木材处理木材中杂酚油保留量和渗透程度的测定 |
Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
EN 12491-2001 |
滑翔伞设备紧急时用降落伞安全要求和试验方法 |
Paragliding equipment - Emergency parachutes - Safety requirements and test methods |
EN 12493-2001 |
液化石油气(LPG)用焊接钢罐油槽车设计和制造 |
Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture |
EN 12495-2000 |
海上固定钢结构的阴极防腐保护 |
Cathodic protection for fixed steel offshore structures |
EN 12499-2003 |
金属结构的内阴极保护 |
Internal cathodic protection of metallic structures |
EN 125-1991 |
燃气器具用火焰监视装置 热电型火焰监视装置 |
Flame supervision devices for gas burning appliances; thermo-electric flame supervision devices |
EN 12500-2000 |
金属材料的防腐大气环境中可能出现的腐蚀大气环境腐蚀性的分类、测定和评价 |
Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments |
EN 125000-1997 |
通用规范铁氧体材料磁芯 |
Generic specification: Cores made of ferrite materials |
EN 12501-1-2003 |
金属材料的防腐泥土中可能出现的腐蚀第1部分:总则 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General |
EN 12501-2-2003 |
金属材料的防腐泥土中可能出现的腐蚀第2部分:低合金和非合金的钢铁材料 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials |
EN 12503-1-2001 |
运动垫第1部分:体操垫安全要求 |
Sports mats - Part 1: Gymnastic mats, safety requirements |
EN 12503-2-2001 |
运动垫第2部分:撑杆跳高和跳高垫安全要求 |
Sports mats - Part 2: Pole vault and high jump mats, safety requirements |
EN 12503-3-2001 |
运动垫第3部分:柔道垫安全要求 |
Sports mats - Part 3: Judo mats, safety requirements |
EN 12503-4-2001 |
运动垫第4部分:减振性能测定 |
Sports mats - Part 4: Determination of shock absorption |
EN 12503-5-2001 |
运动垫第5部分:底层摩擦力的测定 |
Sports mats - Part 5: Determination of the base friction |
EN 12503-6-2001 |
运动垫第6部分:顶层摩擦力的测定 |
Sports mats - Part 6: Determination of the top friction |
EN 12503-7-2001 |
运动垫第7部分:静韧性的测定 |
Sports mats - Part 7: Determination of static stiffness |
EN 12504-1-2000 |
结构用混凝土试验第1部分:空心试样压缩试样的取样检验和试验 |
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
EN 12504-2-2001 |
结构用混凝土试验第2部分:无损检验回弹值的测定 |
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
EN 12504-4-2004 |
结构中的混凝土试验.第4部分:超音波脉冲速率的测定 |
|
EN 12505-2000 |
食品加工机械加工食用油和油脂的离心机安全和卫生要求 |
Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
EN 12507-1999 |
运输服务用于道路运输、储藏和配送业的EN ISO 9002应用的指导性说明 |
Transportation services - Guidance notes on the application of EN ISO 9002 to the road transportation, storage and distribution industries |
EN 12508-2000 |
金属和合金的防腐表面处理、金属和其它无机涂层词汇 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary |
EN 12509-2001 |
架空线用木杆试验方法弹性系数、抗弯强度、密度和含水量的测定 |
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content |
EN 1251-1-2000 |
低温容器 不超过1000L容积的可运输的真空绝热容器 第1部分:基本要求 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements |
EN 1251-2-2000 |
低温容器 不超过1000L容积的可运输的真空绝热容器 第2部分:设计、制造、检验和试验 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing |
EN 1251-3-2000 |
低温容器 不超过1000L容积的可运输的真空绝热容器 第3部分:操作要求 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements |
EN 12510-2001 |
架空线用木杆强度分等标准 |
Wood poles for overhead lines - Strength grading criteria |
EN 125100-1991 |
分规范:电感器用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for inductor applications |
EN 12511-2001 |
架空线用木杆特性值测定 |
Wood poles for overhead lines - Determination for characteristic values |
EN 12512-2001 |
原木结构试验方法机械紧固件形成接头的循环试验 |
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
EN 12513-2000 |
铸件耐磨铸铁 |
Founding - Abrasion resistant cast irons |
EN 12514-1-2000 |
燃油咀炉供油系统用的装置第1部分:安全要求和试验零部件、输油泵、控制和安全装置、油罐 |
Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
EN 12514-2-2000 |
燃油炉供油系统用的装置第2部分:安全要求和试验零部件、阀门、管道、滤油器、油气分离器、油量指示表 |
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
EN 12515-1997 |
热环境利用要求湿度的计算值作热应力的分析测定和说明 |
Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989, modified) |
EN 12516-2-2004 |
工业用阀.外壳设计强度.第2部分:钢阀外壳的计算方法 |
|
EN 12517-1998 |
焊缝的无损检验焊接接头放射线检验验收等级 |
Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
EN 12518-2000 |
人类生活用水水处理用化学品高钙石灰 |
Chemicals used for treatment of water intended for human consumption - High-calcium lime |
EN 12519-2004 |
窗户和行人用门.术语 |
|
EN 1252-1-1998 |
低温容器 材料 第1部分:温度低于-80℃时的强度要求 |
Cryogenic vessels - Materials - Part 1: Toughness requirments for temperatures below -80℃ |
EN 1252-2-2001 |
低温容器 材料 第2部分:温度低于-80℃和-20℃之间的强度要求 |
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80℃ and -20℃ |
EN 125200-1991 |
分规范:线性变压器用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for linear transformers |