标准号 |
中文名称 |
英文名称 |
EN 26461-1-1993 |
水质 亚硫酸盐还原厌氧菌(梭状芽胞杆菌)孢子的检测和计数 第1部分:.液态介质富集法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 1: Method by enrichment in a liquid medium (ISO 6461-1:1986) |
EN 26461-2-1993 |
水质 亚硫酸盐还原厌氧菌(梭状芽胞杆菌)孢子的检测和计数 第2部分::滤膜过滤法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 2: Method by membrane filtration (ISO 6461-2:1986) |
EN 2647-1995 |
标准号: |
中文标题: |
EN 2648-1995 |
航空航天系列镀镉合金钢凹形垫圈 |
Aerospace series - Washers, concave, in alloy steel, cadmium plated |
EN 2649-1995 |
航空航天系列镀镉合金钢头全螺纹的盘形头有槽螺钉等级:900MPa(环境温度)/235℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
EN 2650-1996 |
航空航天系列钝化耐蚀钢制全螺纹盘形头有槽螺钉等级:600 MPa(环境温度)/425℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
EN 26501-1992 |
镍铁 交货要求的规范 |
Ferronickel; specification and delivery requirements (ISO 6501:1988) |
EN 2651-1996 |
航空航天系列镀锡黄铜全螺纹带槽盘形头螺钉等级:380MPa(环境温度)/80℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃ |
EN 2652-1997 |
航空航天系列镀镉合金钢100°普通埋头全螺纹有槽螺钉等级:900MPa(环境温度)/235℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235℃ |
EN 2653-1996 |
航空航天系列钝化耐蚀钢制100度普通埋头螺丝等级:600 MPa(环境温度)/425℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
EN 2654-1996 |
航空航天系列镀锡黄铜全螺纹带槽100°普通埋头螺钉等级:380MPa(环境温度)/ 80℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃ |
EN 26553-1991 |
自动蒸汽疏水阀 标志 |
Automatic steam traps-Marking (ISO 6553:1980) |
EN 26554-1991 |
法兰连接自动蒸汽疏水阀 结构长度 |
Flanged automatic steam traps-Face-to-face dimensions (ISO 6554:1980) |
EN 2656-2001 |
航空航天系列连接管焊接的连接端几何结构 |
Aerospace series - Pipe coupling - Coupling end, welded, Geometric configuration |
EN 26590-1-1992 |
包装 袋 名词和种类 第1部分:纸袋 |
Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983) |
EN 26590-2-1992 |
包装 袋 名词和种类 第2部分:热塑柔性薄膜袋 |
Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986) |
EN 26591-1-1992 |
包装 袋 测量的方法和说明 第1部分:.空纸袋 |
Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984) |
EN 26591-2-1992 |
包装 袋 测量的方法和说明 第2部分:.热塑柔性薄膜空袋 |
Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985) |
EN 26599-1-1992 |
包装 袋 试验的条件 第1部分:纸袋 |
Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983) |
EN 266-1991 |
卷式墙面饰层 纺织墙面饰层规范 |
Wall coverings in roll form; specification for textile wall coverings |
EN 2665-001-1999 |
航空航天系列额定电流 20 A 至50 A三极补偿温度断路器第001部分:技术说明 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification |
EN 2665-003-1999 |
航空航天系列 额定电流 20 A至50 A三极补偿温度断路器第003部分:米制螺纹接线柱产品标准 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard |
EN 2665-004-1999 |
航空航天系列 额定电流 20 A 至50 A三极补偿温度断路器第004部分:UNC螺纹接线柱产品标准 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
EN 2667-6-2001 |
航空航天系列非金属材料泡沫结构粘合剂:试验方法第6部分:水吸收性确定 |
Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption |
EN 267-1999 |
强制通风燃油燃烧器 定义、要求、测试、标志 |
Forced draught oil burners - Definitions, requirements, testing, marking |
EN 26704-1991 |
自动蒸汽疏水阀 分类 |
Automatic steam traps-Classification (ISO 6704:1982) |
EN 26777-1993 |
水质 亚硝酸盐的测定 分子吸收光度法 |
Water quality; Determination of nitrite; Molecular absorption spectrometric method (ISO 6777:1984) |
EN 268-1991 |
民用弹药推进剂 要求和试验方法 |
Propellants for commercial ammunition; requirements and test methods |
EN 26801-1993 |
橡胶或塑料软管 容积膨胀的测定 |
Rubber or plastics hoses-Determination of volumetric expansion (ISO 6801:1983) |
EN 26802-1993 |
钢丝增强的橡胶和塑料软管及软管件 弯抗冲击试验 |
Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) |
EN 26848-1991 |
惰性气体保护电弧焊接以及等离子气体切割和焊接用的钨极 编码 |
Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984) |
EN 26874-1992 |
牙科树脂基窗沟封封闭剂 |
Dental resin-based pit and fissure sealants (ISO 6874:1988) |
EN 26891-1991 |
木材结构 机械紧固件接头 强度和变形特性测定的一般原则 |
Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
EN 269-1994 |
呼吸保护装置 包括护罩的动力推动新鲜空气软管呼吸器 要求、测试、标志 |
Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
EN 26922-1993 |
粘合剂 对接头抗拉强度的测定 |
Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987) |
EN 26927-1990 |
房屋建造 勾缝用品 密封剂 词汇 |
Building construction-Jointing products; Sealants; Vocabulary (ISO 6927:1981) |
EN 2693-1993 |
航空航天系列AL-P5086-H111铝合金薄板和带材 0.3 ≤ a≤6 mm |
Aerospace series - Aluminium alloy Al-P5086-H111 - Sheet and strip 0.3 ≤ a ≤6 mm |
EN 2694-1993 |
航空航天系列AL-P6061-T6或T62铝合金薄板和带材 0.4 ≤a≤6 mm |
Aerospace series - Aluminium alloy Al-P6061-T6 or T62 - Sheet and strip 0.4 ≤ a ≤6 mm |
EN 26948-1991 |
自动蒸气疏水阀 产品试验和工作特性试验 |
Automatic steam traps-Production and performance characteristic tests (ISO 6948:1981) |
EN 2695-1993 |
航空航天系列AL-P6081-T6铝合金薄板和带材 0.3 ≤ a≤ 6 mm |
Aerospace series - Aluminium alloy Al-P6081-T6 - Sheet and strip 0.3 ≤ a ≤6 mm |
EN 2696-1993 |
航空航天系列AL-P7075-T6或T62铝合金薄板和带材 0.4 ≤ a≤ 6 mm |
Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Sheet and strip 0.4≤ a ≤6 mm |
EN 27023-1992 |
包装 袋 空纸袋检验抽样方法 |
Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983) |
EN 27182-1991 |
声学 在操作者位置上测定链锯发出的空气声 |
Acoustics; Measurement at the operators position of airborne noise emitted by chain saws (ISO 7182, edition 1984) |
EN 27201-1-1994 |
灭火剂 卤代烷 第1部分:哈龙1211和哈龙1301的规范 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989) |
EN 27201-2-1994 |
灭火剂 卤代烷 第2部分:安全处置和储运过程的实施规则 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991) |
EN 27213-1993 |
纸浆 取样试验 |
Pulps - Sampling for testing (ISO 7213:1981) |
EN 27243-1993 |
热环境 根据湿球黑球温度计(WBGT)指数对操业人员热负荷的评价 |
Hot environments; Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989) |
EN 27286-1991 |
电阻焊接设备的图形符号 |
Graphical symbols for resistance welding equipment (ISO 7286:1986) |
EN 27326-1993 |
橡胶和塑料软管 静态条件下耐臭氧性的评定 |
Rubber and plastics hoses-Assessment of ozone resistance under static conditions (ISO 7326:1991) |
EN 27389-1990 |
房层建筑 连接件 回弹性的测定 |
Building construction - Jointing products - Determination of elastic recovery (ISO 7389:1987) |
EN 27390-1990 |
房层建筑 连接件 耐流动性的测定 |
Building construction - Jointing products - Determination of resistance to flow (ISO 7390:1987) |
EN 274-1-2002 |
卫生器具用废物装置 第1部分:要求 |
Waste fittings for sanitary appliances - Part 1: Requirements |
EN 274-2-2002 |
卫生器具用废物装置 第2部分:试验方法 |
Waste fittings for sanitary appliances - Part 2: Test methods |
EN 274-3-2002 |
卫生器具用废物装置 第3部分:质量控制 |
Waste fittings for sanitary appliances - Part 3: Quality control |
EN 27418-1993 |
旅游居住车 词汇 |
Leisure accomodation vehicles; vocabulary (ISO 7418:1989) |
EN 2743-2001 |
航空航天系列纤维增强塑料测试材料未老化前调理的标准程序 |
Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
EN 27434-1992 |
开槽锥端紧定螺钉 |
Slotted set screws with cone point (ISO 7434:1983) |
EN 27435-1992 |
开槽长圆柱端紧定螺钉 |
Slotted set screws with long dog point (ISO 7435:1983) |
EN 27436-1992 |
开槽凹端紧定螺钉 |
Slotted set screws with cup point (ISO 7436:1983) |
EN 2744-1992 |
航空航天系列非金属材料、优选的试验温度 |
Aerospace series - Non metallic materials - Preferred test temperature |
EN 2746-1998 |
航空航天系列玻璃纤维增强塑料弯曲试验三点弯曲法 |
Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method |
EN 2747-1998 |
航空航天系列玻璃纤维增强塑料抗拉试验 |
Aerospace series - Glass fibre reinforced plastics - Tensile test |
EN 275-1992 |
木材防腐剂 抗水穿孔防护能力的测定 |
Wood preservatives; determination of the protective effectiveness against marine borers |
EN 2752-1989 |
航空航天系列扩孔轧制系列自锁固定两耳系紧螺母等级:1100MPa/235℃ |
Aerospace series; nuts, anchor, self locking fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235℃ |
EN 27520-1991 |
镍铁 钴含量的测定 火焰原子吸收光谱测定法 |
Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985) |
EN 27526-1991 |
镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985) |
EN 27527-1991 |
镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量滴定法 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; iodometric titration method after induction furnace combustion (ISO 7527:1985) |
EN 2753-1996 |
标准号: |
中文标题: |
EN 27574-1-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第1部分:一般考虑和定义 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1: General considerations and definitions (ISO 7574-1:1985) |
EN 27574-2-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第2部分:用于单个机械的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines (ISO 7574-2:1985) |
EN 27574-3-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第3部分:用于机组的简易(传递)法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985) |
EN 27574-4-1988 |
声学 测定和检验机械及设备噪声标定值的统计方法 第4部分:用于机组的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985) |
EN 27627-1-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第1部分:一般要求 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 1: general requirements (ISO 7627-1:1983) |
EN 27627-2-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第2部分:钙、钾、镁和钠含量0.001-0.02 %(m/m)的测定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 2: determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983) |
EN 27627-3-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第3部分:钴、铁、锰和镍0.01-0.5%( m/m)的测定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 3: determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983) |
EN 27627-4-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第4部分:钼、钛和钒含量0.01-0.5%( m/m)的测定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 4: determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983) |
EN 27627-5-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第5部分:钴、铁、钼、镍、钛和钒含量0.5-2%(m/m )的测定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 5: determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983) |
EN 27627-6-1993 |
硬质合金 火焰原子吸收光谱法的化学分析 第6部分:铬含量在0.01-2%( m/m)的测定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 6: determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985) |
EN 277-1995 |
食品运输袋 机织聚炳烯织物袋 |
Sacks for the transport of food aid - Sacks made of woven polypropylene fabric |
EN 27721-1991 |
沉头螺钉 头部形状和测量 |
Countersunk head screws; Head configuration and gauging (ISO 7721:1983) |
EN 27787-3-1993 |
牙科旋转器械 切割工具 第3部分:技工室研磨机用质合金刀具 |
Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
EN 2781-1998 |
航空航天系列非金属材料结构胶粘剂试验方法初始厚度的测定 |
Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness |
EN 27828-1994 |
水质 生物采样 水生底栖大型无脊椎动物手网采样方法指南 |
Water quality; Methods of biological sampling; Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985) |
EN 27841-1991 |
自动蒸汽疏水阀门 漏气量的测定 |
Automatic steam traps-Determination of steam loss- Test methods (ISO 7841:1988) |
EN 27842-1991 |
自动蒸汽疏水阀门 排水量的测定 |
Automatic steam traps- Determination of discharge capacity- Test methods (ISO 7842:1988) |
EN 27888-1993 |
水质 电导率的测定 |
Water quality; Determination of electrical conductivity (ISO 7888:1985) |
EN 2790-1991 |
标准号: |
中文标题: |
EN 2791-1991 |
标准号: |
中文标题: |
EN 27917-1991 |
声学 在操作者位置上测量刷锯发出的空气声 |
Acoustics; Measurement at the operators position of airborne noise emitted by brush saws (identical with ISO 7917:1987) |
EN 2792-1991 |
标准号: |
中文标题: |
EN 27931-1992 |
电阻焊设备的绝缘帽和套 |
Insulation caps and bushes for resistance welding equipment (ISO 7931:1985) |
EN 2794-001-1999 |
航空航天系列额定电流20 A 至 50 A单极补偿温度断路器第001部分:技术规范 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification |
EN 2794-003-1999 |
航空航天系列额定电流20 A 至 50 A单极补偿温度断路器第003部分:米制螺纹接线 产品标准 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard |
EN 2794-004-1999 |
航空航天系列额定电流20 A至 50 A单极补偿温度断路器第004部分:UNC螺纹接线 产品标准 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
EN 27941-1993 |
工业用丙烷和丁烷 气相色谱分析法 |
Commercial propane and butane; analysis by gas chromatography (ISO 7941:1988) |
EN 27942-1993 |
信息技术 计算机图形 图形核心系统 功能描述 (含1991年修改1) |
Information processing systems; computer graphics - Graphical Kernel Systems (GKS) - Functional description (ISO 7942:1985 including amendment A1:1991) |
EN 27963-1992 |
钢件的焊缝 2号超声波焊接探伤校准块 |
Welds in steel; calibration block no. 2 for ultrasonic examination of welds (ISO 7963:1985) |
EN 27965-1-1992 |
包装 袋 跌落试验 第1部分:纸袋 |
Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984) |
EN 280-2001 |
移动升降机工作台 设计计算、稳定性准则、建造、安全、检查和试验 |
Mobile elevating work platforms - Design calculations, stability criteria, construction, safety, examinations and tests |
EN 280/A1-2004 |
移动升降工作平台.设计计算.稳定性标准.施工.安全.检查和试验 |
|
EN 28029-1993 |
塑料软管 通用型可折叠织物增强输水软管 规范 |
Plastics hose-General purpose collapsible water hose, textile reinforced-Specification (ISO 8029:1985) |
EN 28033-1993 |
橡胶和塑料软管 部件间粘合强度的测定 |
Rubber and plastic hoses-Determination of adhesion between components (ISO 8033:1991) |
EN 28049-1992 |
镍铁丸 分析取样 |
Ferronickel shot; sampling for analysis (ISO 8049:1988) |
EN 28050-1992 |
镍铁合金锭或块 分析取样 |
Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988) |
EN 2808-1997 |
航空航天系列钛和钛合金阳极氧化 |
Aerospace series - Anodizing of titanium and titanium alloys |
EN 2809-2001 |
航空航天系列耐热钢镀银带槽/带眼扁矮普通对边六角螺母等级:900 MPa (环境温度)/650℃ |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 28094-1994 |
钢丝绳芯输送机带 绳芯与涂层间粘合强度试验 |
Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984) |
EN 281-1988 |
司机可控制的自驱动工业卡车降落 踏板的建造和设计规则 |
Self-propelled industrial trucks sit-down rider-controlled; rules for the construction and layout of pedals |
EN 2810-2001 |
航空航天系列耐热纯化钢带槽/带眼扁矮普通对边六角螺母等级:900 MPa (环境温度)/650℃ |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650℃ |
EN 28167-1992 |
电阻焊的凸出部位 |
Projections for resistance welding (ISO 8167:1989) |
EN 28187-1991 |
家用制冷设备 冷冻冷藏箱 特性和试验方法 |
Household refrigerating appliances; refrigerator-freezers; characteristics and test methods (ISO 8187:1991) |
EN 28206-1992 |
氧气切割机的验收试验 重复精度 工作特性 |
Acceptance tests for oxygen cutting machines- Reproducible accuracy- Operational characteristics (ISO 8206:1991) |
EN 28233-1990 |
热塑性塑料阀门 扭矩 试验方法 |
Thermoplastics valves- Torque; test method (ISO 8233:1988) |
EN 28265-1994 |
水质 浅淡水中多石底层上的底栖大型无脊椎动物定量取样器的设计和使用 |
Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988) |
EN 2828-1993 |
航空航天系列用抛光法作金属涂层的粘附性试验 |
Aerospace series - Adhesion test for metallic coatings by burnishing |
EN 2829-1994 |
航空航天系列用喷丸加工法作金属涂层的粘附性试验 |
Aerospace series - Adhesion test for metallic coatings by shot peening |
EN 283-1991 |
交换体 测试 |
Swap bodies; testing |
EN 2830-1993 |
航空航天系列用剪切法作金属镀的粘附性试验 |
Aerospace series - Adhesion test for metallic coatings by shearing action |
EN 2831-1993 |
航空航天系列钢的氢(蚀致)脆性慢速弯曲试验 |
Aerospace series - Hydrogen embrittlement of steels - Test by slow bending |
EN 28317-1992 |
防止儿童拆开的包装 可再次包装的要求和试验程序 |
Child-resistant packaging; requirements and testing procedures for reclosable packages (ISO 8317:1989) |