标准号 |
中文名称 |
英文名称 |
| BS EN 3475-501-2002 |
航空航天系列.飞行器用电缆.试验方法.动态切口 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through) |
| BS EN 3475-502-2002 |
航空航天系列.飞行器用电缆.试验方法.切口延伸 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation) |
| BS EN 3475-503-2002 |
航空航天系列.飞行器用电缆.试验方法.擦伤腐蚀 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion) |
| BS EN 3475-504-2002 |
航空航天系列.飞行器用电缆.试验方法.扭转 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion) |
| BS EN 3475-505-2002 |
航空航天系列.飞行器用电缆.试验方法.导线和绞线抗拉试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands) |
| BS EN 3475-506-2002 |
航空航天系列.飞行器用电缆.试验方法.电镀连续性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity) |
| BS EN 3475-507-2002 |
航空航天系列.飞行器用电缆.试验方法.电镀粘结强度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating) |
| BS EN 3475-508-2002 |
航空航天系列.飞行器用电缆.试验方法.电镀厚度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness) |
| BS EN 3475-509-2002 |
航空航天系列.飞行器用电缆.试验方法.可焊度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability) |
| BS EN 3475-510-2002 |
航空航天系列.飞行器用电缆.试验方法.挤压绝缘护套和套管材料的抗拉强度和延伸率 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material) |
| BS EN 3475-511-2002 |
航空航天系列.飞行器用电缆.试验方法.电缆对电缆的磨耗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion) |
| BS EN 3475-512-2002 |
航空航天系列.飞行器用电缆.试验方法.耐弯度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance) |
| BS EN 3475-603-2002 |
航空航天系列.飞行器用电缆.试验方法.耐湿弧光性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking) |
| BS EN 3475-604-2002 |
航空航天系列.飞行器用电缆.试验方法.耐干弧光的传播 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation) |
| BS EN 3475-605-2002 |
航空航天系列.飞行器用电缆.试验方法.湿气短路试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test) |
| BS EN 3475-701-2002 |
航空航天系列.飞行器用电缆.试验方法.导体绝缘的脱层和粘结 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor) |
| BS EN 3475-702-2002 |
航空航天系列.飞行器用电缆.试验方法.屏幕后推移能力 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability) |
| BS EN 3475-703-2002 |
航空航天系列.飞行器用电缆.试验方法.制造商标记的耐久性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer’s marking) |
| BS EN 3475-704-2002 |
航空航天系列.飞行器用电缆.试验方法.挠性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility) |
| BS EN 3475-705-2002 |
航空航天系列.飞行器用电缆.试验方法.对照测量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Contrast measurement) |
| BS EN 3475-801-2002 |
航空航天系列.飞行器用电缆.试验方法.单位长度导体的电容量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length) |
| BS EN 3475-802-2002 |
航空航天系列.飞行器用电缆.试验方法.不平衡导体的电容量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance) |
| BS EN 3475-803-2002 |
航空航天系列.飞行器用电缆.试验方法.导体的电容量的变化 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation) |
| BS EN 3475-804-2002 |
航空航天系列.飞行器用电缆.试验方法.传播速度 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation) |
| BS EN 3475-805-2002 |
航空航天系列.飞行器用电缆.试验方法.特性阻抗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance) |
| BS EN 3475-806-2002 |
航空航天系列.飞行器用电缆.试验方法.衰减性 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation) |
| BS EN 3475-807-2002 |
航空航天系列.飞行器用电缆.试验方法.转移阻抗 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance) |
| BS EN 3475-808-2002 |
航空航天系列.飞行器用电缆.试验方法.交叉谈话 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk) |
| BS EN 348-1992 |
防护服.材料抗熔融金属溅沫冲击性能的测定 |
(Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal) |
| BS EN 349-1993 |
机械安全.避免挤压人体各部分的最小间隙 |
(Safety of machinery - Minimum gaps to avoid crushing of parts of the human body) |
| BS EN 35-2000 |
从上面供水的立式坐浴盆.连接尺寸 |
(Pedestal bidets with over-rim supply - Connecting dimensions) |
| BS EN 350-1-1994 |
木材和木基制品的耐久性.实心木材的天然耐久性.木材天然耐久性的分类和试验原则指南 |
(Durability of wood and wood-based products - Natural durability of solid wood - Guide to the principles of testing and classification of natural durability of wood) |
| BS EN 350-2-1994 |
木材和木基制品耐久性.实心木材的天然耐久性.欧洲精选重要木材种类的天然耐久性和可处理性 |
(Durability of wood and wood-based products - Natural durability of solid wood - Guide to natural durability and treatability of selected wood species of importance in Europe) |
| BS EN 3506-2001 |
航空航天系列.耐热合金制成的热轧薄板和板材.厚度2.0mm |
(Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm) |
| BS EN 351-1-1996 |
木材和木制品的耐用性.防腐剂处理过的木材.第1部分:防腐剂渗透和滞留的分类 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Classification of preservative penetration and retention) |
| BS EN 351-2-1996 |
木材和木制品的耐用性.防腐剂处理过的木材.用防腐剂处理过的木材的分析取样指南 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Guidance on sampling for the analysis of preservative-treated wood) |
| BS EN 352-1-2002 |
护听器.安全要求和试验.耳套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs) |
| BS EN 352-2-2002 |
护听器.安全要求和试验.耳塞 |
(Hearing protectors - Safety requirements and testing - Ear-plugs) |
| BS EN 352-3-2002 |
护听器.安全要求和试验.工业安全头盔的耳套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs attached to an industrial safety helmet) |
| BS EN 352-4-2001 |
听力保护器.安全要求和试验.依据声强的耳套 |
(Hearing protectors - Safety requirements and testing - Level-dependent ear-muffs) |
| BS EN 352-5-2002 |
听力保护器.安全要求和试验.有源噪声降低型耳机橡皮套 |
(Hearing protectors - Safety requirements and testing - Active noise reduction ear-muffs) |
| BS EN 352-6-2002 |
听力保护器.安全要求和试验.带音频输入的耳机橡皮套 |
(Hearing protectors - Safety requirements and testing - Ear-muffs with electrical audio input) |
| BS EN 352-7-2002 |
听力保护器.安全要求和试验.电平相关耳塞 |
(Hearing protectors - Safety requirements and testing - Level-dependent ear-plugs) |
| BS EN 353-1-2002 |
预防高空坠落的个人用保护设备.定向型坠落阻止装置包括刚性锚固线上的定向型坠落阻止装置指南 |
(Personal protective equipment against falls from a height - Guided type fall arresters including a rigid anchor line) |
| BS EN 353-2-2002 |
预防高空坠落的个人用保护设备.定向型坠落阻止装置包括软锚固线上的定向型坠落阻止装置 |
(Personal protective equipment against falls from a height - Guided type fall arresters including a flexible anchor line) |
| BS EN 354-2002 |
防高空人员坠落保护设备.短绳 |
(Personal protective equipment against falls from a height - Lanyards) |
| BS EN 3541-1992 |
带螺柄的端杆、可调、自对准球轴承.尺寸、扭矩、间隙和载荷 |
(Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads) |
| BS EN 3542-1998 |
耐热镍基合金NI-PH2801(铬镍铁合金X750)螺旋形线圈自锁式螺纹嵌镶件 |
(Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)) |
| BS EN 3543-1997 |
钝化耐热及耐腐蚀钢制短螺纹紧公差标准柄翼型十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/425℃ |
(Screws, 100 ?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient tem) |
| BS EN 355-2002 |
预防高空坠落的人员保护设备.能量吸收器 |
(Personal protective equipment against falls from a height - Energy absorbers) |
| BS EN 3553-2005 |
航空航天系列.铝合金AL-P2618A-T6511.挤制棒材和型材.a或D160mm |
|
| BS EN 356-2000 |
建筑物中的玻璃.安全玻璃.抗人力冲击的试验和分类 |
(Glass in building - Security glazing - Testing and classification of resistance against manual attack) |
| BS EN 3561-2001 |
航空航天系列.钛合金管连接件8°30’.在管端焊接和轧制的带动梁密封端头的箍 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end) |
| BS EN 3566-2001 |
航空航天系列.钛合金管连接件8°30’.带锁紧环的接头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Adaptor with lockring) |
| BS EN 3567-001-2001 |
航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Technical specification) |
| BS EN 3567-003-2001 |
航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器.单个的串联耦合器.产品标准 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Single in-line couplers - Product standard) |
| BS EN 3567-004-2001 |
航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器.复式串联耦合器.产品标准 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Double in-line couplers - Product standard) |
| BS EN 357-2000 |
建筑物中的玻璃.透明或半透明玻璃制品制防火玻璃件.防火性能的分类 |
(Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance) |
| BS EN 357-2004 |
建筑物中的玻璃.包括透明或半透明玻璃制品的防火玻璃件.防火性能的分类 |
|
| BS EN 358-2000 |
工作定位和防高空坠落的个人防护设备.工作定位和约束用带及工作定位用牵索 |
(Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards) |
| BS EN 36-1999 |
沿缘供水墙挂式座浴盆.连接尺寸 |
(Wall-hung bidets with over-rim supply - Connecting dimensions) |
| BS EN 360-2002 |
预防高空坠落的人员保护设备.收缩型坠落阻止装置 |
(Personal protective equipment against falls from a height - Retractable type fall arresters) |
| BS EN 361-2002 |
预防高空坠落的人员保护设备.全身保护成套装置 |
(Personal protective equipment against falls from a height - Full body harnesses) |
| BS EN 3611-1995 |
套筒.尺寸和配合选择.设计标准 |
(Spigots - Dimensions and fit selection - Design standard) |
| BS EN 3612-1997 |
花键用底部切槽.设计标准 |
(Undercuts for splines - Design standard) |
| BS EN 362-1993 |
预防高空坠落的个人用保护设备.连接器 |
(Personal protective equipment against falls from a height - Connectors) |
| BS EN 363-2002 |
预防高空坠落的人员用保护设备.坠落阻止装置 |
(Personal protective equipment against falls from a height - Fall arrest systems) |
| BS EN 364-1993 |
预防高空坠落的个人用保护设备.试验方法 |
(Personal protective equipment against falls from a height - Test methods) |
| BS EN 3642-1997 |
阳极氧化TI-PO2钛制100°标准埋头圆顶实心铆钉.英制系列 |
(Rivets, solid, 100 ?countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series) |
| BS EN 3643-1997 |
阳极氧化TI-PO2钛制100°标准埋头实心铆钉.英制系列 |
(Rivets, solid, 100 ?countersunk normal head, in titanium TI-PO2, anodized, inch based series) |
| BS EN 3644-1997 |
万向头,阳极氧化,英寸基准系列,TI-PO2钛制实心铆钉 |
(Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series) |
| BS EN 365-1993 |
预防高空坠落的个人用保护设备.使用和标记说明的一般要求 |
(Personal protective equipment against falls from a height - General requirements for instructions for use and for marking) |
| BS EN 365-2004 |
预防高空坠落的个人保护设备.使用、维护、周期检验、修理、标记和包装说明的一般要求 |
|
| BS EN 3663-2001 |
航空航天系列.管连接件.丁腈橡胶制成的O形环.75IRHD.温度范围:-55℃到+135℃ |
(Aerospace Series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range: -55 鳦 to + 135 鳦) |
| BS EN 3665-1997 |
清漆和涂料的检验方法.铝合金耐线状腐蚀的检验 |
(Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys) |
| BS EN 367-1992 |
防护服.耐热和耐火防护.火焰旁热传递的测定方法 |
(Protective clothing - Protection against heat and fire - Method for determining heat transmission on exposure to flame) |
| BS EN 3676-1998 |
薄壁、自锁紧嵌镶件.设计标准 |
(Inserts, thin wall, self-locking - Design standard) |
| BS EN 368-1993 |
防护服.耐液体化工产品防护.试验方法:材料耐液体穿透性能 |
(Protective clothing - Protection against liquid chemicals - Test method: resistance of materials to penetration by liquids) |
| BS EN 3688-2001 |
航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力 |
(Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure) |
| BS EN 3689-2001 |
航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力 |
(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure) |
| BS EN 3690-2001 |
航空航天系列.钛合金管联接器8°30’.长闷头活接头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead, long) |
| BS EN 3691-2001 |
航空航天系列.钛合金8°30’管连接件.活接头、闷头、长焊接 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead, long welded) |
| BS EN 3696-2001 |
航空航天系列.耐热钢制成的垫圈 |
(Aerospace series - Washers in heat resisting steel) |
| BS EN 37-1999 |
独立供水抽水马桶.连接尺寸 |
(Pedestal W.C. pans with independent water supply - Connecting dimensions) |
| BS EN 370-1993 |
木材防腐剂.防止家具产生窃蠹的根除效果的测定 |
(Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer)) |
| BS EN 371-1992 |
呼吸器官保护设备用预防低沸点有机化合物的AX气体过滤器和综合过滤器规范 |
(Specification for AX gas filters and combined filters against low boiling organic compounds used in respiratory protection equipment) |
| BS EN 372-1992 |
呼吸器官保护设备用预防特定种名化合物的SX气体过滤器和综合过滤器规范 |
(Specification for SX gas filters and combined filters against specific named compounds used in respiratory protective equipment) |
| BS EN 3720-1995 |
MoS2涂覆的耐热钢FE-PA92HT(A286)制自锁双六角头螺母.等级:1100 MPa(室温)/425℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3721-1995 |
MoS2涂覆的FE-PA92HT(A286)耐热钢制带深镗孔自锁双六角头螺母.等级:1100 MPa(室温)/425℃ |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3722-1995 |
MoS2涂覆的FE-PA92HT(A286)耐热钢制自锁柄螺母.等级:1100 MPa(室温)/425℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3723-1996 |
二硫化钼涂覆的耐热钢FE-PA92HT(A286)制自锁六角头螺母.等级:1100 MPa(室温)/425℃ |
(Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3724-2003 |
航空航天系列.细杆长螺纹双六角头镀MoS2的钛合金TI-P64001螺栓.等级:1100MPa(室温) |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001 MoSDOWN2 coated - Classification: 1 100 MPa (at ambient temperature)) |
| BS EN 3724-2004 |
细杆长螺纹双六角头镀MoS2的钛合金TI-P64001螺栓.强度等级:1100MPa(室温) |
|
| BS EN 3725-2003 |
航空航天系统.MoS2涂覆的钛合金TI-P64001制长螺纹、标准杆、六瓣凹槽盘头螺栓 |
(Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoSDOWN2 coated - Classification: 1100 MPa (at ambient temperature)) |
| BS EN 3725-2005 |
航空航天系列.阳极氧化、MoS2涂覆的钛合金TI-P64001制长螺纹、标准杆、六瓣凹槽盘头螺钉.强度等级:1100MPa(室温) |
|
| BS EN 3725-2005 |
航空航天系列.阳极氧化、MoS2涂覆的钛合金TI-P64001制长螺纹、标准杆、六瓣凹槽盘头螺钉.强度等级:1100MPa(室温) |
|
| BS EN 3726-2003 |
航空航天系列.耐热钢FE-PA92HT (A286), MoS2镀涂的自锁夹紧螺母.分类: 1 100 MPa(室温)/425℃ |
(Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/425℃) |
| BS EN 3726-2005 |
航空航天系列.耐热钢FE-PA2601 (A286)制MoS2涂覆的自锁夹紧螺母.等级: 1100 MPa(室温)/425 鳦 |
|
| BS EN 373-1993 |
防护服.耐熔融金属飞溅材料的评定 |
(Protective clothing - Assessment of resistance of materials to molten metal splash) |
| BS EN 3730-2001 |
航空航天系列.夹件.鞍座.带橡胶弹性垫料的铝合金固定式滑动型.尺寸.质量 |
(Aerospace series - Clamps, saddle - Fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions - Masses) |
| BS EN 374-1-2003 |
耐化学腐蚀和微生物的防护手套.术语和性能要求 |
(Protective gloves against chemicals and micro-organisms - Terminology and performance requirements) |
| BS EN 374-2-2003 |
耐化学腐蚀和微生物的防护手套.第2部分:耐渗透性的测定 |
(Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration) |
| BS EN 374-3-2003 |
耐化学腐蚀和微生物的防护手套.第3部分:耐化学药品渗透性的测定 |
(Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals) |
| BS EN 3740-1997 |
MoS2润滑的阳极氧化钛合金制短螺纹紧公差柄细六角头带肩螺栓.等级:1100 MPa(室温)/315℃ |
(Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 3741-2003 |
航空航天系列.米制夹紧螺母.安装孔和部件 |
(Aerospace series - Nuts, clip, metric - Installation holes and assembly) |
| BS EN 3745-201-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.外观检查 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Visual examination) |
| BS EN 3745-205-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.电缆纵向尺寸的稳定性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable longitudinal dimensional stability) |
| BS EN 3745-301-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.衰减性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Attenuation) |
| BS EN 3745-302-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.数字孔径 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Numerical aperture) |
| BS EN 3745-305-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.周围光耦合的消除 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Immunity to ambient light coupling) |
| BS EN 3745-504-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.微弯曲试验 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Micro bending test) |
| BS EN 3745-507-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.切割强度 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cut-through) |
| BS EN 3745-508-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.扭转力 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Torsion) |
| BS EN 3745-509-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.纽结试验 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Kink test) |
| BS EN 3745-510-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.弯曲试验 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Bending test) |
| BS EN 3745-511-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.电缆间的磨蚀 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion) |
| BS EN 3745-701-2002 |
航空航天系列.飞行器用光纤和电缆.试验方法.可剥离性 |
(Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Strippability) |
| BS EN 3746-2003 |
航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD |
(Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) |
| BS EN 3747-2003 |
航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范 |
(Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification) |
| BS EN 3748-2001 |
航空航天系列.O形环槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com