标准号 |
中文名称 |
英文名称 |
EN ISO 13337-1997 |
弹性圆柱销开槽、轻型 |
Spring-type straight pins - Slotted, light duty (ISO 13337:1997) |
EN ISO 13340-2001 |
可运输气瓶不可再充填的气瓶用瓶阀规范和原型试验 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001) |
EN ISO 13355-2003 |
包装 满装运输包装和单件货物 垂直随机振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001) |
EN ISO 13366-1-1997 |
牛乳体细胞的菌落计数第1部分:镜检法 |
Milk - Enumeration of somatic cells - Part 1: Microscopic method (ISO 13366-1:1997) |
EN ISO 13366-2-1997 |
牛乳体细胞的菌落计数第2部分:电子粒子计数法 |
Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997) |
EN ISO 13366-3-1997 |
牛乳体细胞的菌落计数第3部分:荧光光电法 |
Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997) |
EN ISO 13370-1998 |
建筑物热性能地面传热计算方法 |
Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998) |
EN ISO 13395-1996 |
水质用流动分析(CFA 和FIA)和光谱检测法测定水中亚硝酸盐氮和硝酸盐氮及二者的总量 |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
EN ISO 13397-1-1995 |
牙周 刮匙、牙刮器和牙挖器 第1部分:一般要求 |
Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995) |
EN ISO 13397-3-1996 |
牙周 刮匙、牙刮器和牙挖器 第3部分:牙刮器H型 |
Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996) |
EN ISO 13397-4-1997 |
牙周 刮匙、牙刮器和牙挖器 第4部分:牙挖器盘形 |
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997) |
EN ISO 13402-2000 |
外科和牙科手持器械耐蒸汽消毒、耐腐蚀 和耐热性能的测定 |
Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995) |
EN ISO 13406-1-1999 |
平板视觉显示工作的人类工效学要求第1部分:概述 |
Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999) |
EN ISO 13406-2-2001 |
平板视觉显示工作的人类工效学要求第2部分:平板显示的人类工效学要求 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays (ISO 13406-2:2001) |
EN ISO 13407-1999 |
以人为中心的交互系统设计过程 |
Human-centred design processes for interactive systems (ISO 13407:1999) |
EN ISO 13426-1-2003 |
土工布及相关产品内部结构连接强度第1部分:土工格室 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
EN ISO 13427-1998 |
土工布及相关产品磨损模拟(滑块试验) |
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998) |
EN ISO 13431-1999 |
土工布及相关产品拉伸蠕变和蠕变断裂的测定 |
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
EN ISO 13437-1998 |
土工布及相关产品在土壤中安置和取出试样、并在实验室试验试样的方法 |
Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998) |
EN ISO 13438-2004 |
土工织物和土工织物相关产品.测定耐氧化性的筛选试验方法 |
|
EN ISO 1346-2004 |
纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 |
|
EN ISO 13468-1-1996 |
塑料透明材料光透射率总量的测定第1部分:单束光发射仪器 |
Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
EN ISO 13473-1-2004 |
利用表面外观表征路面结构.第1部分:平均剖面高度的测定 |
|
EN ISO 13478-1997 |
流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)的测定全尺寸试验(FST) |
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997) |
EN ISO 13479-1997 |
流体输送用聚稀烃管材抗裂纹扩展的测定切口管材慢速裂纹增长的试验(切口试验) |
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997) |
EN ISO 13485-2003 |
医疗器械 质量管理体系管理用途的要求 |
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003) |
EN ISO 13500-1998 |
石油和天然气工业钻井液体材料规范和测试 |
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998) |
EN ISO 13533-2001 |
石油和天然气工业钻井和生产设备钻孔设备 |
Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001) |
EN ISO 13534-2000 |
石油和天然气工业钻井和生产设备提升设备的检查、维护、修理和再制造 |
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000) |
EN ISO 13535-2000 |
石油和天然气工业钻井和生产设备提升设备 |
Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
EN ISO 13565-1-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法具有分层功能特性的表面第1部分:滤波和一般测量条件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
EN ISO 13565-2-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法具有分层功能特性的表面第2部分:利用线性材料比率曲线描述 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
EN ISO 13565-3-2000 |
产品几何量技术规范(GPS)表面结构:轮廓法具有分层功能特性的表面第3部分:利用材料的概率曲线描述高 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
EN ISO 13567-1-2002 |
技术产品文件计算机辅助设计(CAD)图层的编排和命名第1部分:综述和原则 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998) |
EN ISO 13567-2-2002 |
技术产品文件计算机辅助设计(CAD)图层的编排和命名第2部分:用于建筑工程文件的概念、格式和代码 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998) |
EN ISO 13625-2002 |
石油和天然气工业 钻探和开采设备 海洋钻机提升机联结器 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
EN ISO 13628-1-1999 |
石油和天然气工业水下采油系统的设计和操作第1部分:一般要求和建议 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999) |
EN ISO 13628-2-2000 |
石油和天然气工业水下采油系统的设计和操作第2部分:海底和海洋设备用软管系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000) |
EN ISO 13628-3-2000 |
石油和天然气工业水下采油系统的设计和操作第3部分:通流线系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
EN ISO 13628-4-1999 |
石油和天然气工业水下采油系统的设计和操作第4部分:井口和采油树设备 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999) |
EN ISO 13631-2002 |
石油和天然气工业整装往复式气体压缩机 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
EN ISO 13666-1998 |
眼科光学眼镜镜片 |
Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998) |
EN ISO 13680-2001 |
石油和天然气工业用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
EN ISO 13691-2002 |
石油和天然气工业特殊用途高速齿轮装置 |
Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001) |
EN ISO 13694-2000 |
光学和光学仪器激光和激光设备激光束能量密度分布的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000) |
EN ISO 13695-2004 |
光学和光子学.激光及其相关设备.激光光谱特性的试验方法 |
|
EN ISO 13696-2002 |
光学和光学仪器光学部件扩散引起的光辐射的试验方法 |
Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002) |
EN ISO 13702-1999 |
石油和天然气工业对海上开发安装中着火和爆炸的控制和减弱要求和指南 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
EN ISO 13703-2000 |
石油和天然气工业海上开采平台上管道系统的设计和安装 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000) |
EN ISO 13705-2001 |
石油和天然气工业一般炼油厂的烧火的加热器 |
Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001) |
EN ISO 13706-2000 |
石油和天然气工业风冷热交换器 |
Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000) |
EN ISO 13710-2004 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
EN ISO 13716-2000 |
牙科学可逆和不可逆水解胶体印模材料系统 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999) |
EN ISO 13731-2001 |
热环境的人类工效学词汇和符号 |
Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
EN ISO 13734-2000 |
天然气有机硫化物添味剂要求和试验方法 |
Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998) |
EN ISO 13736-1997 |
石油产品和其他液体闪点的测定阿贝尔闭口杯法 |
Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997) |
EN ISO 13753-1998 |
机械振动与冲动手臂振动手臂系统为负载时弹性材料振动传递率的测量方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
EN ISO 13757-1996 |
液化石油气油残余物的测定高温法 |
Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996) |
EN ISO 13758-1996 |
液化石油气评价丙烷干燥度阀冻结法 |
Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996) |
EN ISO 13759-1996 |
石油产品柴油中硝酸烷基酯含量的测定分光光度法 |
Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
EN ISO 13760-1998 |
流体输送用塑料压力管材Miner规则累积破坏的计算方法 |
Plastics pipes for the conveyance of fluids under pressure - Miners rule - Calculation method for cumulative damage (ISO 13760:1998) |
EN ISO 13783-1997 |
塑料管道系统硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件密封和承受弯曲及内压的试验方法 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
EN ISO 13786-1999 |
建筑部件热性能动态热特征计算方法 |
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999) |
EN ISO 13787-2003 |
建筑物设备和工业设备用隔热产品申报的热传导性的测定 |
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
EN ISO 13788-2001 |
建筑构件和件的湿热性能避免严重的表面潮湿和间隙式冷凝的内表温度计算方法 |
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation method (ISO 13788:2001) |
EN ISO 13789-1999 |
建筑物热性能热损失系数计算方法 |
Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999) |
EN ISO 13790-2004 |
建筑物的热性能.房间取暖用能量的计算 |
|
EN ISO 13791-2004 |
建筑物的热性能.夏季无机械通风冷却时房间内部温度的计算.通用标准和确认程序 |
|
EN ISO 13793-2001 |
建筑物热性能地基防冻胀的热设计 |
Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001) |
EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光泽度的测定 |
|
EN ISO 13844-2000 |
塑料管道系统用于硬(聚氯乙烯)(PVC-U) 管道的弹性密封环式承口连接件负压下密封试验方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000) |
EN ISO 13845-2000 |
塑料管道系统用于硬(聚氯乙烯)(PVC-U) 管道的弹性密封环式承口连接件内压下角度偏转密封试验方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000) |
EN ISO 13846-2000 |
塑料管道系统热塑性加压塑料管道用端部负载轴承和非端部负载轴承的安装和连接在内水压下长期密封的试验 |
Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000) |
EN ISO 13849-2-2003 |
机械安全 控制系统有关安全部件 第2部分:振动 |
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003) |
EN ISO 13897-2004 |
牙科学.汞齐合金胶囊 |
|
EN ISO 13900-2002 |
钢硼含量的测定蒸馏后姜黄素光谱测定法 |
Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
EN ISO 13916-1996 |
焊接预热温度、道间温度和预热维持温度测量的指南 |
Welding - Guidance for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) |
EN ISO 13918-1998 |
焊接电弧螺栓焊用螺栓和陶瓷箍套 |
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998) |
EN ISO 13919-1-1996 |
焊接电子束和激光焊接头缺陷的质量分级指南第1部分:钢 |
Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
EN ISO 13919-2-2001 |
焊接电子束和激光焊接头缺陷的质量分级指南第2部分:铝及其可焊合金 |
Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
EN ISO 13920-1996 |
焊接焊接结构的一般公差长度和角度的尺寸形状和位置 |
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
EN ISO 13927-2003 |
塑料用锥形辐射加热器和热电堆探测器进行简单热释放试验 |
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001) |
EN ISO 13929-2001 |
小艇操舵装置齿轮传动连接系统 |
Small craft - Steering gear - Geared link systems (ISO 13929:2001) |
EN ISO 13934-1-1999 |
纺织品织物拉伸特性第1部分:用条样法测定断裂强力和断裂伸长率 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) |
EN ISO 13934-2-1999 |
纺织品织物拉伸特性第2部分:用抓样法测定断裂强力和断裂伸长率 |
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999) |
EN ISO 13935-1-1999 |
纺织品织物及其制品的接缝拉伸特性第1部分:用条样法测定接缝断裂强力 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999) |
EN ISO 13935-2-1999 |
纺织品织物及其制品的接缝拉伸特性第2部分:用抓样法测定接缝断裂强力 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999) |
EN ISO 13936-1-2004 |
纺织品.机织物缝合处纱线抗脱性测定.第1部分:固定接缝开口法 |
|
EN ISO 13936-2-2004 |
纺织品.机织物缝合处纱线抗脱性测定.第2部分:固定负载法 |
|
EN ISO 13937-1-2000 |
纺织品织物撕破特性第1部分:用冲击摆锤方法测定撕破强力(埃尔门多夫) |
Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000) |
EN ISO 13937-2-2000 |
纺织品织物撕破特性第2部分:裤形试样撕破强力的测定(单舌法) |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
EN ISO 13937-3-2000 |
纺织品织物撕破特性第3部分:翼形试样撕破强力的测定(单舌法) |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000) |
EN ISO 13937-4-2000 |
纺织品织物撕破特性第4部分:舌形试样撕破强力的测定(双舌法) |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000) |
EN ISO 13938-1-1999 |
纺织品织物胀破特性第1部分:胀破强力测定的液压方法 |
Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
EN ISO 13938-2-1999 |
纺织品织物胀破特性第2部分:胀破强力测定的气压方法 |
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
EN ISO 13943-2000 |
消防安全词汇 |
Fire safety - Vocabulary (ISO 13943:1999) |
EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
EN ISO 13995-2000 |
防护服 机械特性测定服装材料在压力下防液体渗透阻力的测定 |
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
EN ISO 13997-1999 |
防护服 机械特性 抗尖锐物体切割性的测定 |
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
EN ISO 13998-2003 |
防护服 围裙、裤子和背心耐手持刀切割和刺破性 |
Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
EN ISO 140-1-1997 |
声学建筑物和建筑构件的隔声测量第1部分:能抑制侧向传声的实验室试验装置的要求 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997) |
EN ISO 140-1/prA1-2002 |
声学建筑物和建筑构件的隔声测量第1部分:能抑制侧向传声的实验室试验装置的要求修改A1:轻质构件试验 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission; Amendment 1: Specific requirements on the frame of the test opening for lightwe |
EN ISO 140-12-2000 |
声学建筑物和建筑构件的隔声测量第12部分:房间对房间的空气声和共有楼板的撞击声的隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000) |
EN ISO 140-14-2004 |
声学.建筑物和建筑构件的隔音测量.第14部分:场地的特殊情况的指南 |
|
EN ISO 140-3-1995 |
声学建筑物和建筑构件的隔声测量第3部分:建筑物构件空气声隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) |
EN ISO 140-3/prA1-2002 |
声学建筑物和建筑构件的隔声测量第3部分:建筑构件隔声的实验室测量修改A1:两层间避免强连接的轻质双 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements; Amendment 1: Specific mounting conditions for lightweight double partitions to avoid st |
EN ISO 140-4-1998 |
声学建筑物和建筑构件的隔声测量第4部分:房间之间空气声隔声的现场测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
EN ISO 140-5-1998 |
声学建筑物和建筑构件的隔声测量第5部分:饰面构件和饰面的空气声隔声的现场测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of facade elements and facades (ISO 140-5:1998) |
EN ISO 140-6-1998 |
声学建筑物和建筑构件的隔声测量第6部分:地板撞击声隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998) |
EN ISO 140-7-1998 |
声学建筑物和建筑构件的隔声测量第7部分:地板撞击声隔声的现场测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998) |
EN ISO 140-8-1997 |
声学建筑物和建筑构件的隔声测量第8部分:重型标准地板上敷设面层使传递的撞击噪声减低的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997) |
EN ISO 14001-1996 |
环境管理体系规范及使用指南 |
Environmental management systems - Specification with guidance for use (ISO 14001:1996) |
EN ISO 14001-2004 |
环境管理系统.使用的要求和指南 |
|
EN ISO 1401-1999 |
农业喷雾用橡胶软管 |
Rubber hoses for agricultural spraying (ISO 1401:1999) |
EN ISO 1402-1996 |
橡胶和塑料软管和软管组件液压试验 |
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) |
EN ISO 14020-2001 |
环境标志和声明通用原则 |
Environmental labels and declarations - General principles (ISO 14020:2000) |
EN ISO 14021-2001 |
环境标志和声明自我环境声明(II型环境标志) |
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
EN ISO 14024-2000 |
环境标志和声明I型环境标志原则和程序 |
Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999) |
EN ISO 1403-1997 |
一般用途的输水橡胶软管规范 |
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) |
EN ISO 14031-1999 |
环境管理环境表现评价指南 |
Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999) |