标准号 |
中文名称 |
英文名称 |
EN 60264-1-1994 |
绕组线的包装第1部分:圆绕组线容器 |
Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968) |
EN 60264-2-1-1994 |
绕组线的包装第2部分:圆柱形筒装交货线盘第1节:基本尺寸 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions (IEC 60264-2-1:1989) |
EN 60264-2-2-1994 |
绕组线的包装第2部分:圆柱形筒装交货线盘第2节:热塑性材料可回收线盘规范 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic material (IEC 60264-2-2:1990) |
EN 60264-2-2-2004 |
绕组线的封装.第2-2部分:圆柱形筒装交货线盘.热塑性材料制可回收线盘的规范 |
|
EN 60264-2-2/prA1-2003 |
绕组线的包装第2部分:圆柱形筒装交货线盘第2节:热塑性材料可回收线盘规范 修改prA1 |
Amendment 1 to IEC 60264-2-2: Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools; Specification for returnable spools made from thermoplastic material |
EN 60264-2-3-1994 |
绕组线的包装第2部分:圆柱形筒装交货线盘第3节:热塑性材料不可回收线盘规范 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-2-3:1990) |
EN 60264-2-3-2004 |
绕组线的封装.第2-3部分:圆柱形筒装交货线盘.热塑性材料制不可回收线盘的规范 |
|
EN 60264-2-3/prA1-2003 |
绕组线的包装第2部分:圆柱形筒装交货线盘第3节:热塑性材料不可回收线盘规范修改prA1 |
Amendment 1 to IEC 60264-2-3: Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material |
EN 60264-3-1-2000 |
绕组线的包装第3-1部分:圆锥形筒装交货线盘基本尺寸 |
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999) |
EN 60264-3-2-1999 |
绕组线的包装第3-2部分:圆锥形筒装交货线盘热塑性材料可回收线盘规范 |
Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999) |
EN 60264-3-3-1994 |
绕组线的包装第3部分:圆锥形筒装交货线盘第3节:热塑性材料不可回收线盘规范 |
Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-3-3:1990) |
EN 60264-3-3-2004 |
绕组线的封装.第3-3部分:锥形筒装交货线盘.热塑性材料制不可回收线盘的规范 |
|
EN 60264-3-3/prA1-2003 |
绕组线的包装第3部分:圆锥形筒装交货线盘第3节:热塑性材料不可回收线盘规范修改prA1 |
Amendment 1 to IEC 60264-3-3: Packaging of winding wires - Part 3-3: Taper barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material |
EN 60264-3-4-1999 |
绕组线的包装第3-4部分:圆锥形筒装交货线盘圆锥形筒装交货线盘容器的基本尺寸 |
Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999) |
EN 60264-3-5-1999 |
绕组线的包装第3-5部分:圆锥形筒装交货线盘热塑性材料线盘线筒规范 |
Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999) |
EN 60264-4-1-1994 |
绕组线的包装第4-1部分:试验方法热塑性材料交货线盘 |
Packaging of winding wires - Part 4: Methods of test - Section 1: Delivery spools made from thermoplastic material (IEC 60264-4-1:1989) |
EN 60264-4-1/prA1-1997 |
绕组线的包装第4-1部分:试验方法热塑性材料交货线盘修改prA1 |
Amendment to IEC 60264-4-1: Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials |
EN 60264-4-2-1994 |
绕组线的包装第4-2部分:试验方法热塑性材料锥形筒装交货线盘容器 |
Packaging of windig wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992) |
EN 60264-4-2-2004 |
绕组线的封装.第4-2部分:试验方法.热塑材料制锥形筒装交货线盘容器 |
|
EN 60264-4-2/prA1-2003 |
绕组线的包装第4-2部分:试验方法热塑性材料锥形筒装交货线盘容器修改prA1 |
Amendment 1 to IEC 60264-4-2: Packaging of winding wires - Part 4-2: Methods of test; Containers made from thermoplastic material for taper barrelled delivery spools |
EN 60264-5-1-1997 |
绕组线的包装第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘基本尺寸 |
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997) |
EN 60264-5-2-2001 |
绕组线的包装第5-2部分:带圆锥形侧板的圆柱形筒装交货线盘热塑材料制可回收线盘规范 |
Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001) |
EN 60265-1-1998 |
高压开关第1部分::额定电压1kV以上至52kV以下高压开关 |
High-voltage switches - Part 1: Switches for rated voltages above 1 kV and less than 52 kV (IEC 60265-1:1998) |
EN 60268-16-2003 |
声系统设备第16部分:用语音传输系数测定语音清晰度的目标额定功率 |
Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2003) / Note: Endorsement notice |
EN 60268-3-2000 |
声系统设备第3部分:放大器 |
Sound system equipment - Part 3: Amplifiers (IEC 60268-3:2000) / Note: Includes Corrigendum of January 2002 |
EN 60268-4-1999 |
声系统设备第4部分:传声器(IEC 60268-4:1997) |
Sound system equipment - Part 4: Microphones (IEC 60268-4:1997) |
EN 60268-4-2004 |
声系统设备.第4部分:传声器 |
|
EN 60268-5-2003 |
声系统设备第5部分:扬声器 |
Sound system equipment - Part 5: Loudspeakers (IEC 60268-5:2003) / Note: Endorsement notice |
EN 60268-7-1996 |
声系统设备第7部分:头戴受话器及耳机 |
Sound system equipment - Part 7: Headphones and earphones (IEC 60268-7:1996) |
EN 60269-1-1998 |
低压熔断器 第1部分:一般要求 |
Low-voltage fuses - Part 1: General requirements (IEC 60269-1:1998) |
EN 60269-4-1-2002 |
低压熔断器第4-1部分:保护半导体器件用熔断体的补充要求 第Ⅰ-Ⅲ节:标准熔断器的类型例子 |
Low-voltage fuses - Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices; Sections I to III: Examples of types of standardized fuse-links (IEC 60269-4-1:2002) / Note: Endorsement notice. |
EN 60270-2001 |
高压测试技术局部放电测量 |
High-voltage test techniques - Partial discharge measurements (IEC 60270:2000) |
EN 60276-1996 |
碳刷、刷握、换向器和集电环的定义和名称 |
Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings (IEC 60276:1968 + A1:1987) |
EN 60282-1-2002 |
高压熔断器第1部分:限流熔断器 |
High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:2002) / Note: Endorsement notice |
EN 60286-1-1998 |
自动装配用件的包装第1部分:具有轴向引线的件在连续编带上的带式包装 |
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:1997) |
EN 60286-3-1998 |
自动装配用件的包装第3部分:表面安装的件在连续编带上的包装 |
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997) |
EN 60286-4-1998 |
自动装配用件的包装第4部分:封装在E和G型包装件中的电子件用的粘着料斗 |
Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997) |
EN 60286-5-1997 |
自动装配用件的包装第5部分:矩阵式料盘 |
Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:1995, modified) |
EN 60286-5-2004 |
自动装配用件的包装.第5部分:矩阵式料盘 |
|
EN 60286-6-1998 |
自动装配用件的包装第6部分:表面安装组件的散装盒包装 |
Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998) |
EN 60286-6-2004 |
自动装配用件的包装.第6部分:表面安装组件的散装盒包装 |
|
EN 60296-2004 |
电工用液体.变压器和开关设备用未使用过的矿物绝缘油 |
|
EN 60297-3-101-2004 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-101部分:插箱及其插件 |
|
EN 60297-3-102-2004 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-102部分:注入器/抽出器手柄 |
|
EN 60297-3-103-2004 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-103部分:键控和定位销 |
|
EN 60297-5-100-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-100部分:分机柜和相关插入单设计综 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units; Design overview (IEC 60297-5-100:2001) |
EN 60297-5-101-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-101部分:分机柜和相关插入单插入把 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units; Injector/extractor handle (IEC 60297-5-101:2001) |
EN 60297-5-102-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-102分:分机柜和相关插入单电磁屏蔽 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units; Electromagnetic shielding provision (IEC 60297-5-102:2001) / Note: Includes |
EN 60297-5-103-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-103分:分机柜和相关插入单静电放电 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units; Electrostatic discharge protection (IEC 60297-5-103:2001) |
EN 60297-5-104-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-104分:分机柜和相关插入单锁扣装置 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units; Keying (IEC 60297-5-104:2001) |
EN 60297-5-105-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-105部分:分机柜和相关插入单定位钉 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units; Alignment and/or earth pin (IEC 60297-5-105:2001) |
EN 60297-5-107-2001 |
电子设备用机械结构件482.6mm (19 in)系列机械结构件的尺寸第5-107部分:分机柜和相关插入单背面安 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear mounted plug-in units (IEC 60297-5-107:2001) |
EN 60299-1994 |
家用电热毯性能测试方法 |
Household electric blankets - Methods for measuring performance (IEC 60299:1994) |
EN 603-1-1996 |
铝和铝合金 锻坯 第1部分:检验和交货的技术条件 |
Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
EN 603-2-1996 |
铝和铝合金 锻坯 第2部分:机械性能 |
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
EN 603-3-2000 |
铝和铝合金 锻坯 第3部分:尺寸和形状公差 |
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form |
EN 60300-1-2003 |
可信性管理第1部分:可信性方案管理 |
Dependability management - Part 1: Dependability management systems (IEC 60300-1:2003) / Note: Endorsement notice |
EN 60300-2-1996 |
可信性管理第2部分:可信性大纲要素和任务 |
Dependability management - Part 2: Dependability programme elements and tasks (IEC 60300-2:1995) |
EN 60300-2-2004 |
可靠性管理.第2部分:可靠性管理指南 |
|
EN 60300-3-1-2004 |
可靠性管理.第3-1部分:应用指南.可靠性分析技术.方法指南(IEC 60300-3-1-2003) |
|
EN 60300-3-12-2004 |
可信性管理.第3-12部分:应用指南.综合逻辑支持 |
|
EN 60300-3-14-2004 |
可信性管理.第3-14部分:应用指南.维修和维修支持 |
|
EN 60305-1996 |
标称电压1000V以上架空线路用绝缘子交流系统用陶瓷或玻璃绝缘子单盘形悬式绝缘子单的特性 |
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 60305:1995) |
EN 60309-1-1999 |
工业用插头、插座和耦合器第1部分:一般要求 |
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements (IEC 60309-1:1999) |
EN 60309-1/A11-2004 |
工业用插头、插座和耦合器.第1部分:一般要求 |
|
EN 60309-2-1999 |
工业用插头、插座和耦合器第2部分:插销和插套附件的尺寸互换性要求 |
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999) |
EN 60309-2/A11-2004 |
工业用插头、插座和耦合器.第2部分:插销和插套附件的尺寸互换性要求 |
|
EN 60310-1996 |
铁路应用运输车辆的牵引变压器和电感器 |
Railway applications - Traction transformers and inductors on rolling stock (IEC 60310:1991, modified) |
EN 60310-2004 |
铁路设施.铁路车辆用牵引变压器和电感器 |
|
EN 60311-2003 |
家用和类似用途的电熨斗性能测试方法 |
Electric irons for household or similar use - Methods for measuring performance (IEC 60311:2002) / Note: Endorsement notice |
EN 60312-2004 |
家用真空吸尘器.性能测量方法 |
|
EN 60315-4-1998 |
各种发射类别的无线电接收机的测量方法第4部分:调频声音广播发射接收机 |
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions (IEC 60315-4:1997) |
EN 60315-7-1995 |
各种发射类别的无线电接收机的测量方法第7部分:数字卫星接收机的测量方法 |
Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers (IEC 60315-7:1995) |
EN 60315-9-1996 |
各种发射类别的无线电接收机的测量方法第9部分:与无线电数据系统接收相关特性的测量 |
Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception (IEC 60315-9:1996) |
EN 60317-0-3-2004 |
特种绕组线规范.第0-3部分:一般要求.漆包圆铝线 |
|
EN 60317-0-5/prAX-1997 |
特种绕组线规范第0-5部分:一般要求玻璃丝编织裸扁铜线或漆包扁铜线修改prAX |
Amendment to IEC 60317-0-5 |
EN 60317-0-5/prAY-1997 |
特种绕组线规范第0-5部分:一般要求玻璃丝编织裸扁铜线或漆包扁铜线修改prAY |
Amendment to IEC 60317-0-5 |
EN 60317-0-6-2001 |
特种绕组线规范第0-6部分:一般要求玻璃丝绕包浸树脂或浸渍漆裸或漆包圆铜线 |
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001) |
EN 60317-11-2000 |
特种绕组线规范第11部分:130级丝包可软焊聚氨酯漆包圆铜束线 |
Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering (IEC 60317-11:1999) |
EN 60317-31/prA2-1997 |
特种绕组线规范第31部分:温度指数180、玻璃丝绕包聚酯或聚酯酰亚胺浸渍裸或漆包扁铜线修改prA2 |
Amendment to IEC 60317-31 |
EN 60317-32/prA2-1997 |
特种绕组线规范第32部分:温度指数155、玻璃丝绕包聚酯或聚酯酰亚胺浸渍裸或漆包扁铜线修改prA2 |
Amendment to IEC 60317-32 |
EN 60317-33/prA2-1997 |
特种绕组线规范第33部分:温度指数200、玻璃丝绕包硅酮漆浸渍裸或漆包扁铜线修改prA2 |
Amendment to IEC 60317-33 |
EN 60317-34-1997 |
特种绕组线规范第34部分:130L级聚酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 34: Polyester enamelled round copper wire, class 130 L (IEC 60317-34:1997) |
EN 60317-39/prAX-1997 |
特种绕组线规范第39部分:温度指数180、玻璃丝编织聚酯或聚酰酰亚胺浸渍裸或漆包扁铜线修改prAX |
Amendment to IEC 60317-39 |
EN 60317-40/prAX-1997 |
特种绕组线规范第40部分:温度指数200、玻璃丝编织硅酮漆浸渍裸或漆包扁铜线修改prAX |
Amendment to IEC 60317-40 |
EN 60317-42-1997 |
特种绕组线规范第42部分:200级聚酰氨-酰亚胺漆包圆铜线 |
Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper winding wire, class 200 (IEC 60317-42:1997) |
EN 60317-43-1997 |
特种绕组线规范第43部分:240级芳香聚酰亚胺薄膜绕包圆铜线 |
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 (IEC 60317-43:1997) |
EN 60317-44-1997 |
特种绕组线规范第44部分:240级芳香聚酰亚胺薄膜绕包扁铜线 |
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (IEC 60317-44:1997) |
EN 60317-45-1998 |
特种绕组线规范第45部分:130级聚酯漆包圆铜线 |
Specification for particular types of winding wires - Part 45: Polyester enamelled round copper wire, class 130 (IEC 60317:1998) |
EN 60317-46-1997 |
特种绕组线规范第46部分:240级芳香聚酰亚胺漆包圆铜线 |
Specification for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 (IEC 60317-46:1997) |
EN 60317-47-1997 |
特种绕组线规范第47部分:240级芳香聚酰亚胺漆包扁铜线 |
Specification for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 (IEC 60317-47:1997) |
EN 60317-48-2000 |
特种绕组线规范第48部分:温度指数155、玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线 |
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999) |
EN 60317-49-2000 |
特种绕组线规范第49部分:温度指数180、玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线 |
Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999) |
EN 60317-50-2000 |
特种绕组线规范第50部分:温度指数220、玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线 |
Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999) |
EN 60317-51-2001 |
特种绕组线规范第51部分:180级可软焊聚氨基甲酸乙酯漆包圆铜线 |
Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 (IEC 60317-51:2001) |
EN 60317-52-1999 |
特种绕组线规范第52部分:温度指数220、芳香聚酰胺薄膜绕包圆铜线 |
Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 (IEC 60317-52:1999) |
EN 60317-53-1999 |
特种绕组线规范第53部分:温度指数220、芳香聚酰胺薄膜绕包扁铜线 |
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 (IEC 60317-53:1999) |
EN 60318-1-1998 |
电声学人的头和耳模拟器第1部分:超级听力耳机校正用耳模拟器 |
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones (IEC 60318-1:1998) |
EN 60318-2-1998 |
电声学人的头和耳模拟器第2部分:在扩展的高频范围内测听力耳机校正用间歇听力耦合器 |
Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range (IEC 60318-2:1998) |
EN 60318-3-1998 |
电声学人的头和耳模拟器第3部分:用于听力测定计的超听力耳机校正用声耦合器 |
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry (IEC 60318-3:1998) |
EN 60320-1-2001 |
家用和类似一般用途电器偶合器第1部分:一般要求 |
Appliance couplers for household and similar general purposes - Part 1: General requirements (IEC 60320-1:2001) |
EN 60320-2-1-2000 |
家用和类似一般用途电器偶合器第2-1部分:缝纫机偶合器 |
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers (IEC 60320-2-1:2000) |
EN 60320-2-2-1998 |
家用和类似一般用途电器偶合器第2-2部分:家用和类似设备用互联偶合器 |
Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment (IEC 60320-2-2:1998) |
EN 60320-2-3-1998 |
家用和类似一般用途电器偶合器第2-3部分:保护等级高于IPXO的电器偶合器 |
Appliances couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 (IEC 60320-2-3:1998) |
EN 60322-2001 |
铁路应用机车车辆用电气设备开路结构用电力电阻器的规则 |
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction (IEC 60322:2001) |
EN 60325-2004 |
辐射防护装置.α、β和α/β(β能量60keV)污染测量仪和监测仪 |
|
EN 60332-1-1-2004 |
着火条件下电缆和光缆的试验.第1-1部分:单根绝缘电线或电缆垂直火焰蔓延的试验.装置 |
|
EN 60332-1-2-2004 |
着火条件下电缆和光缆的试验.第1-2部分:单根绝缘电线或电缆垂直火焰蔓延的试验.1kW预混合火焰用规程 |
|
EN 60332-1-3-2004 |
着火条件下电缆和光缆的试验.第1-3部分:单根绝缘电线或电缆垂直火焰蔓延的试验.火焰熔滴/颗粒的测定规程 |
|
EN 60332-2-1-2004 |
着火条件下电缆和光缆的试验.第2-1部分:单根小型绝缘电线或电缆的垂直火焰蔓延试验.装置 |
|
EN 60332-2-2-2004 |
着火条件下电缆和光缆的试验.第2-2部分:单根小型绝缘电线或电缆的垂直火焰蔓延试验.扩散火焰用规程 |
|
EN 60335-1-1988 |
家用和类似用途电气的安全第1部分:通用要求 |
Safety of household and similar electrical appliances; part 1: general requirements (IEC 60335-1:1983, modified) / Note: To be replaced by EN 60335-1 (1994-09). |
EN 60335-1-2002 |
家用和类似用途电器的安全第1部分:一般要求(IEC 60335-1-2001修订) |
Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2001, modified) / Note: Observe transition period for EN 60335-1 (1994) ending 2008-07-01*Intended as replacement for EN 60335-1 (1994-09), EN 60335-1/A1 (19 |
EN 60335-1-2004 |
家用和类似用途电器.安全.第1部分:一般要求 |
|
EN 60335-1/prAD-1996 |
家用和类似用途电器的安全第1部分:一般要求修改prAD |
Safety of household and similar electrical appliances - Part 1: General requirements; Amendment AD |
EN 60335-1/prAE-1996 |
家用和类似用途电器的安全第1部分:一般要求修改prAE |
Safety of household and similar electrical appliances - Part 1: General requirements (IEC 60335-1:1991/A1:1994, modified) |
EN 60335-2-10-2003 |
家用和类似用途电器的安全第2-10部分:地板处理机和湿式擦洗机的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines (IEC 60335-2-10:2002) / Note: Endorsement notice |
EN 60335-2-101-2002 |
家用和类似用途电器安全 第2-101部分:喷雾器的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers (IEC 60335-2-101:2002) / Note: Endorsement notice |
EN 60335-2-103-2003 |
家用和类似用途电器安全 第2-103部分:门、窗传动装置的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2002) / Note: Endorsement notice |
EN 60335-2-11-2003 |
家用和类似用途电器的安全 第2-11部分:滚筒式干衣机的特殊要求 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2002, modified) / Note: Endorsement notice*To be amended by EN 60335-2-11/prA1 (2003-06). |