标准号 |
中文名称 |
英文名称 |
| prEN 14117-2002 |
混凝土结构防护和维修用产品和系统 试验方法 黏性浇注产品的粘度测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of viscosity of cementitious injection products |
| prEN 14124-2001 |
有内溢流的冲洗池的进水阀 |
Inlet valves for flushing cisterns with internal overflow |
| prEN 14125-2003 |
汽油加油站的地下管道工程 |
Pipework for underground installation at petrol stations |
| prEN 14127-2001 |
无损检验超声波厚度测量 |
Non-destructive testing - Ultrasonic thickness measurement |
| prEN 14128-2003 |
木材和木基产品的耐久性用生物试验法测定医用木木制品防生虫性的性能标准 |
Durability of wood and wood-based products - Performance criteria for curative wood preservatives as determined by biological tests |
| prEN 14129-2001 |
液化石油汽（LGP）罐压力调节阀 |
Pressure relief valves for LPG tanks |
| prEN 14134-2003 |
建筑的通风 住宅通风系统的安装检查和性能试验 |
Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| prEN 14135-2003 |
覆盖物 防火性能的测定 |
Coverings - Determination of fire protection ability |
| prEN 14141-2003 |
天然气管道输送阀 试验和性能要求 |
Valves for natural gas transportation in pipelines - Performance requirements and tests |
| prEN 14146-2003 |
天然石材试验方法 动态弹性模量的测定（用基本共振频率测定法） |
Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
| prEN 14147-2003 |
天然石材试验方法 抗盐雾腐蚀（变质）性的测定 |
Natural stone test methods - Determination of resistance to ageing by salt mist |
| prEN 14150-2001 |
土工合成隔离层 流体渗透性的测定 |
Geosynthetic barriers - Determination of permeability to liquids |
| prEN 141500-1992 |
分规范：经能力批准的定做的精密电位器 |
Sectional specification: custom built precision potentiometers with capability approval |
| prEN 141501-1992 |
空白详细规范：提供经能力批准的定做的精密电位器的生产商 |
Blank detail specification: manufacturers supplying custom built precision potentiometers with their scope of capability approval |
| prEN 14151-2001 |
土工合成布 断裂强度的测定 |
Geosynthetics - Determination of burst strength |
| prEN 14153-1-2003 |
娱乐潜水 戴潜水呼吸器娱乐潜水员训练的相关安全的最低要求 第1部分： 1级受训 潜水员 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 1: Level 1; Supervised diver |
| prEN 14153-2-2003 |
娱乐潜水 戴潜水呼吸器训练的相关安全的最低要求 第2部分：等级2 自主潜水员 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2; Autonomous diver |
| prEN 14153-3-2003 |
娱乐潜水 戴潜水呼吸器训练的相关安全的最低要求 第3部分：等级3 教练 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3: Level 3; Dive leader |
| prEN 14154-1-2001 |
水表 第1部分：一般要求 |
Water meters - Part 1: General requirements |
| prEN 14154-2-2001 |
水表 第2部分：安装及使用条件 |
Water meters - Part 2: Installation and conditions of use |
| prEN 14154-3-2001 |
水表 第3分: 试验方法及试验设备 |
Water meters - Part 3: Test methods and equipment |
| prEN 14157-2001 |
天然石材试验方法 抗磨损的测定 |
Natural stone test methods - Determination of the abrasion resistance |
| prEN 14158-2003 |
天然石材试验方法 断裂力的测定 |
Natural stone test methods - Determination of rupture energy |
| prEN 14159-2001 |
纺织品地板覆盖物 图案展示公差和小地毯及整全室地毯（直线）尺寸公差的推荐 |
Textile floor coverings - Recommendations for tolerances on (linear) dimensions of rugs and wall-to-wall carpet and for tolerances on pattern repeat |
| prEN 14161-2003 |
石油和天然气工业 管道运输系统 |
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified) |
| prEN 14175-3-2003 |
通风橱 第3部分：型式试验方法 |
Fume cupboards - Part 3: Type test methods |
| prEN 14176-2003 |
食品 在蚌类中用用高效液相色谱法（HPLC）测定蚌类中软骨藻酸 |
Foodstuffs - Determination of domoic acids in mussels by HPLC |
| prEN 14177-2003 |
食品 纯的和混合的苹果汁和酱中展开青霉素的测定用液体/液体分配提纯的高效液相色谱法（HPLC）测定 |
Foodstuffs - Determination of patulin in clear and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up |
| prEN 14178-1-2001 |
建筑玻璃 碱性碱土硅酸盐玻璃产品 浮法玻璃 |
Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
| prEN 14178-2-2001 |
建筑玻璃 碱性碱土硅酸盐玻璃产品 第2部分：合格性评估 |
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity |
| prEN 14179-1-2001 |
建筑玻璃 热浸热固钠钙安全玻璃 第1部分：种类和定义 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| prEN 14179-2-2001 |
建筑用玻璃 热浸热固钠钙安全玻璃 第2部分：合格性评估 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity |
| prEN 14181-2003 |
固定源排放 自动监测系统的质量保证 |
Stationary source emissions - Quality assurance of automated measuring systems |
| prEN 14183-2003 |
梯级凳 |
Step stools |
| prEN 14188-1-2001 |
接缝填料和密封剂 第1部分：热应用密封剂的规范 |
Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
| prEN 1419-1994 |
电子束和激光束的钢焊缝 关于缺陷质量水平的指南 |
Electron and laser beam welded joints in steel; guidance on quality levels for imperfections |
| prEN 14190-2001 |
二次处理石膏板产品 试验方法、定义和要求 |
Gypsum plasterboard products from secondary processing - Definitions, requirements and test methods |
| prEN 14195-2001 |
石膏隔墙、墙板、天花板内衬用金属构架部件试验方法、定义和要求 |
Metal framing components for gypsum plasterboard partitions, wall und ceiling linings - Definitions, requirements and test methods |
| prEN 14196-2003 |
土工合成纤维织物 粘土土工合成织物隔离物单位面积质量的测试验方法 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
| prEN 14197-2-2003 |
低温容器 静态非真空隔热容器 第2部分：设计、制造、试验和检查 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| prEN 14197-3-2003 |
低温容器 静态非真空隔热容器 第3部分：操作要求 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements |
| prEN 14198-2001 |
铁路设备 刹车 机车牵引列车的刹车系统的要求 |
Railway applications - Braking - Requirements for the brake system of trains hauled by a locomotive |
| prEN 14199-2001 |
特殊土工工程施工 微桩法 |
Execution of special geotechnical works - Micropiles |
| prEN 14200-2003 |
铁路设备 吊件 抛物面形钢弹簧 |
Railway application - Suspension components - Parabolic springs, steel |
| prEN 14201-2003 |
帘和百叶窗 耐重复开关性 试验方法 |
Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
| prEN 14202-2001 |
百叶窗和外层帘 用管形和方形电动装置牵引的适用性 试验方法和要求 |
External blinds and shutters - Suitability for use of tubular and square motorization - Requirements and test method |
| prEN 14203-2003 |
百叶窗和内层及外层帘 装摇动把手（T.O)的机械操作系统的使用性能 试验方法和要求 |
Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| prEN 14204-2003 |
化学防腐剂和消毒剂 兽医方面使用化学防腐剂和消毒杀灭分枝菌能力评定用定量悬浮试验 试验方法和要求（2 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2, step 1) |
| prEN 14205-2003 |
天然石材的试验方法 努氏硬度测定 |
Natural stone test methods - Determination of Knoop hardness |
| prEN 14208-2003 |
可运输气瓶 气体运输用容积达3000升的焊接气罐规范 设计和结构 |
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| prEN 14209-2001 |
预制石膏线 试验方法、定义和要求 |
Preformed plasterboard cornices - Definitions, requirements and test methods |
| prEN 14210-2003 |
表面活性剂 用镫形法或圆环法测定表面活性剂溶液的表面张力 |
Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
| prEN 14211-2003 |
环境空气质量 用化学发光法测定对一氧化 化氮和二氧化氮浓度测定的测量方法 |
Ambient air quality - Measurement method for the determination of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| prEN 14212-2003 |
环境空气质量 用紫外荧光法测定二氧化硫浓度测定的测量方法 |
Ambient air quality - Measurement method for the determination of the concentration of sulphur dioxide by ultraviolet fluorescence |
| prEN 14216-2003 |
水泥 大块浇灌低热水泥成份和规范和遵守的标准 |
Cement - Composition, specifications and conformity criteria for very low heat special cements |
| prEN 14220-2001 |
窗外、门框和外门扇用木材和木制材料 要求和规范 |
Timber and wood-based materials in windows, external door leaves and external door frames - Requirements and specification |
| prEN 14221-2001 |
窗内、门框和内门扇用木材和木制材料 要求和规范 |
Timber and wood-based materials in internal door leaves and internal door frames - Requirements and specification |
| prEN 14223-2001 |
防水柔性薄板 车辆通行的混凝土桥面和其他混凝土表面的防水 水吸收测定 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
| prEN 14224-2001 |
防水柔性薄板 车辆通行的混凝土桥面和其他混凝土表面的防水 裂纹搭接性能的测定 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
| prEN 14225-3-2001 |
潜水服装 第3部分：御寒或保温服 试验方法和要求 |
Diving suits - Part 3: Actively heated or cooled suit (systems) - Requirements and test methods |
| prEN 14225-4-2001 |
潜水服装 第4部分：一个大气压的潜水服 试验方法和人为因数要求 |
Diving suits - Part 4: One atmosphere diving suit; Human factors requirements and test methods |
| prEN 14227-1-2001 |
未粘合及液压粘合的混合物 规范 第1部分：公路路基和底基层用水泥粘合混合物 |
Unbound and hydraulically bound mixtures - Specifications - Part 1: Cement bound mixtures for road bases and subbases |
| prEN 14227-2-2001 |
未粘合及液压粘合的混合物 规范 第2部分 矿渣粘合混合物 定义、成分、分类 |
Unbound and hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures - Definitions, composition, classification |
| prEN 14227-3-2001 |
未粘合及液压粘合的混合物 规范 第3部分： 粘合混合物用灰分 定义、成分、分类 |
Unbound and hydraulically bound mixtures - Specifications - Part 3: Fly ash for bound mixtures - Definitions, composition, classification |
| prEN 14227-4-2001 |
未粘合及液压粘合的混合物 规范 第4部分：液压粘合混合物用灰分 定义、成分、分类 |
Unbound and hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures; Definitions, composition, classification |
| prEN 14227-5-2002 |
未粘合及液压粘合的混合物 规范 第5部分 用液压道路粘合剂粘合的粒状物料 规范 第3部分：定义、成份、 |
Unbound and hydraulically bound mixtures - Specifications - Part 5: Granular materials bound with hydraulic road binders; Definitions, composition, classification |
| prEN 14229-2001 |
架空线用木电线杆 要求 |
Wood poles for overhead lines - Requirements |
| prEN 14238-2001 |
起重机 手控荷载操纵装置 |
Cranes - Manually controlled load manipulating devices |
| prEN 14239-2003 |
建筑物通风 管道系统 管道系统 表面积测量 |
Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| prEN 14240-2003 |
建筑物通风 冷却的天花板 额定值和试验 |
Ventilation for buildings - Chilled ceilings - Testing and rating |
| prEN 14241-1-2001 |
烟囱 弹性密封剂和弹性密封 试验方法和材料要求 烟囱衬垫的密封 |
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| prEN 14242-2001 |
铝及铝合金 化学分析 感应耦合等离子发射光谱分析 |
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| prEN 14246-2001 |
天花板吊顶石膏材 试验方法、定义和要求 |
Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| prEN 14250-2001 |
木材结构 用冲压金属板扣的预制构架的产品要求 |
Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners |
| prEN 14251-2003 |
铺地织物 机织栽绒地毯的分类 |
Structural round timber - Test methods |
| prEN 14253-2003 |
机械振动 职业性曝露于全身振动对健康危害的测量和评估 操作指南 |
Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| prEN 14254-2001 |
体外诊断医疗设备 除血液外从人体采集的样品一次性贮存容器 |
In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans |
| prEN 14255-1-2001 |
不连续光辐射 工作场所人暴露于人造紫外光源辐射的评估和测量 |
Incoherent optical radiation - Part 1: Measurement and assessment of radiation exposures by artificial UV-sources in the workplace |
| prEN 14256-2001 |
非结构木材应用粘合剂 耐静态荷载要求和试验方法 |
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| prEN 14257-2001 |
粘合剂 木材粘合剂 高温下搭接头的拉力强度的测定 |
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT91) |
| prEN 14258-2001 |
粘合剂 在特殊温度条件下接头长时和短时期暴露的机械性能 |
Adhesives - Mechanical behaviour of joints subjected to short and long terms exposure at specified conditions of temperature |
| prEN 14259-2003 |
地面覆盖物胶粘剂 要求 |
Adhesives for floor coverings - Requirements for mechanical and electrical performance |
| prEN 14267-2001 |
灌溉技术 灌溉栓 |
Irrigation techniques - Irrigation hydrants |
| prEN 14268-2001 |
灌溉技术 灌溉用水表 |
Irrigation techniques - Meters for irrigation water |
| prEN 14276-1-2001 |
热泵和冷却系统的压力设备 容器 一般要求 |
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels; General requirements |
| prEN 14277-2001 |
建筑物通风 送气口 在送气口/充气箱中用校正传感器测量气流的方法 |
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in ATD/Plenum boxes |
| prEN 14278-1-2003 |
纺织品 棉纤维粘性测定 第1部分：用人工测热器法 |
Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device |
| prEN 14279-2001 |
木屑层压胶合板木材（LVL） 要求、规格、定义和分类 |
Laminated Veneer Lumber (LVL) - Specifications, definitions, classification and requirements |
| prEN 14280-2001 |
地下电缆管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范 |
Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14281-2001 |
地下电缆管道的塑料管线系统 聚乙烯 塑料管、管件及管线规范 |
Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14282-2001 |
地下电缆管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范 |
Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14283-2001 |
一般用途地下管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范 |
Plastics piping systems for general purpose buried ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14284-2001 |
一般用途地下管道的塑料管线系统 聚乙烯 塑料管、管件及管线规范 |
Plastics piping systems for general purpose buried ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14285-2001 |
一般用途地下管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范 |
Plastics piping systems for general purpose buried ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14286-2001 |
铝及铝合金 危险货物运输和贮存罐的可焊轧制产品 |
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| prEN 14287-2001 |
铝及铝合金 制造包装及包装部件用铝材化学成分的特殊要求 |
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| prEN 14288-2003 |
皮革 机械和物理试验 云雾特性测定 |
Leather - Physical and mechanical tests - Determination of fogging characteristics |
| prEN 14289-2003 |
皮革 机械和物理试验 水渗透压测定 |
Leather - Physical and mechanical tests - Determination of water penetration pressure |
| prEN 14290-2001 |
锌及锌合金 二次加工的原材料 |
Zinc and zinc alloys - Secondary raw materials |
| prEN 14291-2001 |
气体装置泄漏检测用起泡液 |
Foam producing solutions for leak detection on gas installation |
| prEN 14292-2001 |
升温时木材胶粘剂耐静态加载的测定 |
Determination of static load resistance of wood adhesives to increasing temperature |
| prEN 14293-2001 |
粘合剂 粘结镶木地板用粘合剂 最低要求和试验方法 |
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
| prEN 14294-2001 |
皮革和制鞋材料用粘合剂 用模压处理制备粘结试片 |
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| prEN 14295-2003 |
焊接消耗品 高强度钢埋弧焊丝和管状药芯焊条与焊条、焊剂组件 分类 |
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
| prEN 14296-2001 |
家用公共洗涤池 |
Communal washing troughs for domestic purposes |
| prEN 14297-2001 |
烟囱 耐熔冻试验方法 |
Chimneys - Frezze-thaw resistance test method |
| prEN 14298-2001 |
锯木 烘干质量评估 |
Sawn timber - Assessment of drying quality |
| prEN 14299-2001 |
非活动外科植入物 心脏和动脉植入物的特殊要求 aterial stents（ 阿特利特用量）的特殊要求 |
Non active surgical implants - Particular requirements for cardiac and vascular implants - Specific requirements for aterial stents |
| prEN 14303-2002 |
工业装置和建筑设备用热绝缘产品 工厂制矿棉产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| prEN 14304-2002 |
工业装置和建筑设备用热绝缘产品 工厂制柔性人造橡胶泡沫产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| prEN 14305-2002 |
工业装置和建筑设备用热绝缘产品 工厂制蜂窝玻璃产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| prEN 14306-2002 |
工业装置和建筑设备用热绝缘产品 工厂制硅酸钙产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| prEN 14307-2002 |
工业装置和建筑设备用热绝缘产品 工厂制挤压聚苯乙烯泡沫产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| prEN 14308-2002 |
工业装置和建筑设备用热绝缘产品 工厂制硬质聚氨基甲酸乙酯泡沫和聚异氰尿酸酯泡沫产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| prEN 14309-2002 |
工业装置和建筑设备用热绝缘产品 工厂制膨胀聚氯乙烯产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| prEN 14313-2002 |
工业装置和建筑设备用隔热产品 工厂制聚乙烯泡沫产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| prEN 14314-2002 |
工业装置和建筑设备用热绝缘产品 工厂制酚醛泡沫产品 规范 |
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| prEN 14315-1-2002 |
建筑物热绝缘产品 现场喷制硬质聚氨基甲酸乙酯泡沫产品 第1部分：安装前的硬质泡沫喷射系统的规范 |
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 1: Specification for the rigid foam spray system before installation |
| prEN 14315-2-2002 |
建筑物热绝缘产品 现场喷制硬质聚氨基甲酸乙酯泡沫产品 第2部分：安装产品规范 |
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 2: Specification for the installed products |
| prEN 14316-1-2002 |
建筑物热绝缘产品 现场制膨胀珍珠岩热绝缘产品 第1部分：安装前粘合的及松散填充的产品规范 |
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com