标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 2286-3-1998 |
用橡胶或塑料涂层的织物.滚子特性的测定.第3部分:单位面积的整体的质量,单位面积涂层的质量和单位面积基布的质量的测量方法 |
Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998 |
| DIN EN ISO 2307-2005 |
纤维绳索.特定物理和机械性能测定 |
|
| DIN EN ISO 2307-2005 |
纤维绳索.特定物理和机械性能测定 |
|
| DIN EN ISO 2320-1998 |
长效扭矩式钢质六角螺母.机械和功能特性 |
Prevailing torque type steel hexagon nuts - Mechanical and performance properties (ISO 2320:1997); German version EN ISO 2320:1997 |
| DIN EN ISO 2338-1998 |
未淬火钢和奥氏体不锈钢制的圆柱销 |
Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997 |
| DIN EN ISO 2342-2004 |
有柄开槽无头螺钉 |
|
| DIN EN ISO 23429-2004 |
六角凹头量规 |
|
| DIN EN ISO 2360-1995 |
非磁性基体金属上的非导体镀层.镀层厚度的测量.涡流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982); German version EN ISO 2360:1995 |
| DIN EN ISO 2360-2004 |
非磁性导电基体上非导体覆盖层.镀层厚度的测量.振幅灵敏性涡流法 |
|
| DIN EN ISO 2361-1995 |
磁性和非磁性基质的镍电镀层.镀层厚度的测量.磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982); German version EN ISO 2361:1995 |
| DIN EN ISO 2398-1997 |
压缩空气用纺织纤维增强橡胶软管.规范 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 |
| DIN EN ISO 24034-2005 |
焊接消耗品.钛和钛合金熔焊用实芯焊丝和焊条.分类(ISO 24034-2005).德文版本 EN ISO 24034-2005 |
|
| DIN EN ISO 2409-1994 |
色漆和清漆.交叉切割试验 |
Paints and varnishes - Cross-cut test (ISO 2409:1992); German version EN ISO 2409:1994 |
| DIN EN ISO 2411-2000 |
橡胶或塑料涂覆织物.涂层粘着力的测定 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000); German version EN ISO 2411:2000 |
| DIN EN ISO 24234-2005 |
牙医学.牙科用汞齐合金用汞及合金 |
|
| DIN EN ISO 2431 Berichtigung 1-2000 |
DIN EN ISO 2431-1996的勘误 |
Corrigenda to DIN EN ISO 2431:1996-04 (EN ISO 2431:1996/AC:1999) |
| DIN EN ISO 2431-1996 |
涂料和清漆.用流量杯测定流动时间 |
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:1993, including Technical Corrigendum 1:1994); German version EN ISO 2431:1996 |
| DIN EN ISO 2439-2001 |
挠性多孔聚脂材料.硬度测量(压痕技术) |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998); German version EN ISO 2439:2000 |
| DIN EN ISO 2440-2000 |
柔性和刚性多孔聚合材料.加速老化试验 |
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997); German version EN ISO 2440:1999 |
| DIN EN ISO 2450-2000 |
奶油.脂肪含量的测定.重量法(参比法) |
Cream - Determination of fat content - Gravimetric method (Reference method) (ISO 2450:1999); German version EN ISO 2450:1999 |
| DIN EN ISO 2495-2000 |
铁蓝颜料.试验方法和规范 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995); German version EN ISO 2495:2000 |
| DIN EN ISO 2503-1998 |
气焊设备.300巴以下焊接,切割和相关工艺的气瓶用减压器 |
Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998); German version EN ISO 2503:1998 |
| DIN EN ISO 252-1-1999 |
织物传输带.结构件之间的粘接强度.第1部分:试验方法 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999); German version EN ISO 252-1:1999 |
| DIN EN ISO 2535-2003 |
塑料.不饱和聚酯树脂.室温条件下胶凝时间的测量 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002 |
| DIN EN ISO 2538-2003 |
产品几何量技术规范(GPS).棱柱的角度和斜度系列 |
Geometrical product specifications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998); German version EN ISO 2538:2003 |
| DIN EN ISO 2554-1998 |
塑料.未饱和的聚酯树脂.羟基值的测定 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998 |
| DIN EN ISO 2555-2000 |
塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德法测定表面粘度 |
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989); German version EN ISO 2555:1999 |
| DIN EN ISO 2556-2001 |
塑料.大气压下薄膜和薄板气体传输率的测定 |
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000 |
| DIN EN ISO 2566-1-1999 |
钢.断裂伸长值的换算.第1部分:碳素钢和低合金钢 |
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984); German version EN ISO 2566-1:1999 |
| DIN EN ISO 2566-2-1999 |
钢.断裂伸长值的换算.第2部分:奥氏体钢 |
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984); German version EN ISO 2566-2:1999 |
| DIN EN ISO 2578-1998 |
塑料.长期热作用下温度-时间极限值的测定 |
Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998 |
| DIN EN ISO 2580-1-2003 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.第1部分:命名系统和规范基础 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002); German version EN ISO 2580-1:2002 |
| DIN EN ISO 2580-2-1999 |
塑料.丙烯腈--丙二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.第2部分:试样制备与基础规范 |
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994); German version EN ISO 2580-2:1999 |
| DIN EN ISO 2580-2-2004 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| DIN EN ISO 2592-2002 |
石油产品.闪点和燃点的测定.克利弗兰得(Cleveland)开杯法 |
Petroleum products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000); German version EN ISO 2592:2002 |
| DIN EN ISO 2624-1995 |
铜和铜合金.晶粒大小平均值的评定 |
Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995 |
| DIN EN ISO 2626-1995 |
铜.氢脆试验 |
Copper - Hydrogen embrittlement test (ISO 2626:1973); German version EN ISO 2626:1995 |
| DIN EN ISO 2639-2003 |
钢.渗碳层和硬化层深度的测定和检验 |
Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002); German version EN ISO 2639:2002 |
| DIN EN ISO 266-1997 |
声学.优选频率 |
Acoustic - Preferred frequencies (ISO 266:1997); German version EN ISO 266:1997 |
| DIN EN ISO 2702-1994 |
热处理钢自攻螺钉.机械性能 |
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994 |
| DIN EN ISO 2738-2000 |
不包括硬金属的烧结金属材料.渗透性烧结金属材料.密度、油含量和开口孔隙度的测定 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999 |
| DIN EN ISO 2740-2001 |
除硬质合金外的烧结金属材料.抗拉试验工件 |
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:1999); German version EN ISO 2740:1999 |
| DIN EN ISO 2789-1995 |
信息和文献.国际图书馆统计学 |
Information and documentation - International library statistics (ISO 2789:1991); German version EN ISO 2789:1994 |
| DIN EN ISO 2789-2003 |
信息和文献.国际图书馆统计学 |
(Information and documentation - International library statistics (ISO 2789:2003); German version EN ISO 2789:2003) |
| DIN EN ISO 2808-1999 |
涂料和清漆.漆膜厚度的测定 |
Paints and varnishes - Determination of film thickness (ISO 2808:1997); German version EN ISO 2808:1999 |
| DIN EN ISO 2810-2004 |
涂料和清漆.涂层的自然老化.暴露和评估 |
|
| DIN EN ISO 2811-1-2002 |
涂料和清漆.密度的测定.第1部分:比重瓶法 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997); German version EN ISO 2811-1:2001 |
| DIN EN ISO 2811-2-2002 |
涂料和清漆.密度的测定.第2部分:潜体法 |
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:1997); German version EN ISO 2811-2:2001 |
| DIN EN ISO 2811-3-2002 |
涂料和清漆.密度的测定.第3部分:振荡法 |
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:1997); German version EN ISO 2811-3:2001 |
| DIN EN ISO 2811-4-2002 |
涂料和清漆.密度的测定.第4部分:压力杯法 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997); German version EN ISO 2811-4:2001 |
| DIN EN ISO 2812-1-1994 |
色漆和清漆.耐液体性测定.第1部分:总方法 |
Paints and varnishes - Determination of resistance to liquids - Part 1: General methods (ISO 2812-1:1993); German version EN ISO 2812-1:1994 |
| DIN EN ISO 2812-2-1995 |
色漆和清漆.耐液体性测定.第2部分:水浸法 |
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion methods (ISO 2812-2:1993); German version EN ISO 2812-2:1994 |
| DIN EN ISO 2813-1999 |
涂层材料.在20度,60度和85度下非金属涂层反射光泽的测定. |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20, 60 und 85 (ISO 2813:1994, including Technical Corrigendum 1:1997); German version EN ISO 2813:1999 |
| DIN EN ISO 2815-1998 |
色漆和清漆.布考耳兹(Buchholg)压痕试验 |
Paints and varnishes - Buchholz indentation test (ISO 2815:1973); German version EN ISO 2815:1998 |
| DIN EN ISO 2818-1997 |
塑料.通过机械加工的试样体制备 |
Plastics - Preparation of test specimens by machining (ISO 2818:1994); German version EN ISO 2818:1996 |
| DIN EN ISO 2819-1995 |
金属基质上的金属镀层.电镀层和化学沉积层.试验附着力的方法述评 |
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980); German version EN ISO 2819:1994 |
| DIN EN ISO 283-1-2001 |
纺织输送带.完全厚度拉伸试验.第1部分:拉伸强度、断裂延伸和标准荷载延伸的测定 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000); German version EN ISO 283-1:2000 |
| DIN EN ISO 284-2004 |
输送带.导电率.规范和试验方法 |
|
| DIN EN ISO 2860-1999 |
土方机械.最小出入口尺寸 |
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992); German version EN ISO 2860:1999 |
| DIN EN ISO 2867-1999 |
土方机械.出入口装置 |
Earth-moving machinery - Access systems (ISO 2867:1994); German version EN ISO 2867:1998 |
| DIN EN ISO 2870-1994 |
表面活性剂.洗涤剂.酸性条件下可水解的和不可水解的阴离子活性物质的测定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986); German version EN ISO 2870:1994 |
| DIN EN ISO 2871-1-1994 |
表面活性剂.洗涤剂-阳离子活性物质含量的测定.第1部分:高分子量阳极活性物质 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988); German version EN ISO 2871-1:1994 |
| DIN EN ISO 2871-2-1994 |
表面活性剂.洗涤剂,阳离子活性物含量测定.第2部分:低分子团(200-500)的阳离子活性物质 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990); German version EN ISO 2871-1:1994 |
| DIN EN ISO 2873-2002 |
包装.满装的运输包装及成组装运.低压试验 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000); German version EN ISO 2873:2002 |
| DIN EN ISO 2875-2003 |
包装.完整满装运输包装件和成组装运.喷水试验 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000); German version EN ISO 2875:2002 |
| DIN EN ISO 2897-1-1999 |
塑料.耐冲击聚苯乙烯模塑和挤塑材料.第1部分:命名与基础规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999 |
| DIN EN ISO 2897-2-1999 |
塑料.耐冲击聚苯乙烯模塑和挤塑材料.第2部分:试样制备与基础规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999 |
| DIN EN ISO 2897-2-2004 |
塑料.耐冲击聚苯乙烯(PS-I)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| DIN EN ISO 2898-1-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑与注塑材料.第1部分:命名与基础规范 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996); German version EN ISO 2898-1:1999 |
| DIN EN ISO 2898-2-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑与注塑材料.第2部分:试样制备与特性测定 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999 |
| DIN EN ISO 291-1997 |
塑料.调节和检验用的标准大气压 |
Plastics - Standard atmospheres for conditioning and testing (ISO 291:1997); German version EN ISO 291:1997 |
| DIN EN ISO 2922-2001 |
声学.内河航道和港湾船舶发出的气载噪声的测量 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); German version EN ISO 2922:2000 |
| DIN EN ISO 293-2003 |
塑料.热塑性材料的压塑试样 |
(Plastics - Compression moulding test specimens of thermoplastic materials (ISO 293:1986); German version EN ISO 293:2003) |
| DIN EN ISO 293-2005 |
塑料.热塑性材料试样的压模铸造 |
|
| DIN EN ISO 294-1-1998 |
塑料.热塑材料试样的注塑.第1部分:一般原理和多用途试样及棒的制造 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998 |
| DIN EN ISO 294-2-1998 |
塑料.热塑材料试样的注塑.第2部分:小拉伸棒 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996); German version EN ISO 294-2:1998 |
| DIN EN ISO 294-3-1998 |
塑料.热塑材料试样的注塑.第3部分:小板 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:1996); German version EN ISO 294-3:1998 |
| DIN EN ISO 294-4-1998 |
塑料.热塑材料试样的注塑.第4部分:模塑收缩的测定 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:1997); German version EN ISO 294-4:1998 |
| DIN EN ISO 294-4-2003 |
塑料.热塑材料试样的注塑法.第4部分:模塑收缩率的测定 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003) |
| DIN EN ISO 295-1998 |
塑料.热固性材料制试样的压塑 |
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991); German version EN ISO 295:1998 |
| DIN EN ISO 295-2004 |
塑料.热固性材料试样的压模塑法 |
|
| DIN EN ISO 3001-1999 |
塑料.环氧化合物.环氧基当量的测定 |
Plastics - Epoxide compounds - Determination of epoxide equivalent (ISO 3001:1999); German version EN ISO 3001:1999 |
| DIN EN ISO 3037-1996 |
瓦楞纤维板.边缘耐压碎性的测定(不涂蜡边法) |
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:1994); German version EN ISO 3037:1995 |
| DIN EN ISO 305-1999 |
塑料.聚氯乙烯和有关含聚合物和共聚物及其混合物的热稳定性的测定.色变法 |
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999 |
| DIN EN ISO 3059-2002 |
无损检验.渗透法检验和磁粉检验.观察条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001); German version EN ISO 3059:2001 |
| DIN EN ISO 306-1997 |
塑料.热塑塑料.维卡(VICAT)软化温度的测定(VST) |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994); German version EN ISO 306:1996 |
| DIN EN ISO 306-2004 |
塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST) |
|
| DIN EN ISO 307-1998 |
塑料.聚酰胺.粘度值的测定 |
Plastics - Polyamides - Determination of viscosity number (ISO 307:1994); German version EN ISO 307:1997 |
| DIN EN ISO 308-1998 |
塑料.酚醛树脂模塑材料.丙酮可溶成份的测定(未加工状态下模塑材料的表面树脂含量) |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997 |
| DIN EN ISO 3095-2005 |
铁路设施.声学.有轨车辆发出噪声的测量 |
|
| DIN EN ISO 3098 Bb.1-2001 |
技术制图.字体.字体A用绘图格子 |
Technical drawings - Lettering - Drafting grids for lettering A |
| DIN EN ISO 3098 Bb.2-2001 |
技术制图.字体.字体B用绘图格子 |
Technical drawings - Lettering - Drafting grids for lettering B |
| DIN EN ISO 3098-0-1998 |
技术产品文献.字体.第0部分:一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997); German version EN ISO 3098-0:1997 |
| DIN EN ISO 3098-2-2000 |
技术产品文献.字体.第2部分:拉丁字母、数字和标记 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks (ISO 3098-2:2000); German version EN ISO 3098-2:2000 |
| DIN EN ISO 3098-3-2000 |
技术产品文献.字体.第3部分:希腊字母 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000); German version EN ISO 3098-3:2000 |
| DIN EN ISO 3098-4-2000 |
技术产品文献.文字书写.第4部分:拉丁字母的区分标志和特殊标志 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000); German version EN ISO 3098-4:2000 |
| DIN EN ISO 3098-5-1998 |
技术产品文献.字体.第5部分:拉丁字母,数字和标志的CAD字体 |
Technical product documentation - Lettering - Part 5: CAD-Lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997); German version EN ISO 3098-5:1997 |
| DIN EN ISO 3098-6-2000 |
技术产品文献.字体.第6部分:西里尔字母 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000); German version EN ISO 3098-6:2000 |
| DIN EN ISO 3104-1999 |
石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999 |
| DIN EN ISO 3107-2005 |
牙医学.锌氧化物/丁香酸和锌氧化物/非丁香酸粘固粉 |
|
| DIN EN ISO 3126-2005 |
塑料管道系统.塑料部件.尺寸测定 |
|
| DIN EN ISO 3126-2005 |
塑料管道系统.塑料部件.尺寸测定 |
|
| DIN EN ISO 3146 Berichtigung 1-2003 |
DIN EN ISO 3146-2002的勘误 |
Corrigenda to DIN EN ISO 3146:2002-06 (EN ISO 3146:2000/AC:2002) |
| DIN EN ISO 3146-2002 |
塑料.毛细管和偏振光显微镜法测定半晶状聚合物的熔化性能(熔化温度或熔化区域) |
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000); German version EN ISO 3146:2000 |
| DIN EN ISO 3164-1999 |
土方机械.保护结构的实验室评定.极限偏差容量规范 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995); German version EN ISO 3164:1999 |
| DIN EN ISO 3166-1-1998 |
国家和他们的地区名的表示代码.第1部分:地区代码 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:1997); German version EN ISO 3166-1:1997 |
| DIN EN ISO 3167-1997 |
塑料.多用途试样 |
Plastics - Multipurpose-test specimens (ISO 3167:1993); German version EN ISO 3167:1996 |
| DIN EN ISO 3170-1999 |
液态石油.人工取样(ISO 3170:1988 含修改件1:1998) |
Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998); German version EN ISO 3170:1998 |
| DIN EN ISO 3170-2004 |
石油液体.人工采样 |
|
| DIN EN ISO 3171-2000 |
石油液态产品.管道自动取样 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999 |
| DIN EN ISO 3175-1-1998 |
纺织物.干洗和最终处理.第1部分:纺织物和衣物清洗合格评定 |
Textiles - Dry cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998); German version EN ISO 3175-1:1998 |
| DIN EN ISO 3175-2-1998 |
纺织物.干洗和最终处理.第2部分:四氯乙烷法 |
Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998); German version EN ISO 3175-2:1998 |
| DIN EN ISO 3175-3-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第3部分:用烃溶剂清洁和整理时的性能测试程序 |
(Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2003); German version of EN ISO 3175-3:2003) |
| DIN EN ISO 3175-3-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第3部分:用烃溶剂清洁和整理时的性能测试程序 |
|
| DIN EN ISO 3175-4-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第4部分:用模拟湿洗清洁和整理时的性能测试程序 |
(Textiles - Professional care, drycleaning and wetcleaning of textiles - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003); German version EN ISO 3175-4:2003) |
| DIN EN ISO 3175-4-2004 |
纺织品.织物和服装的专业护理、干洗和湿洗.第4部分:用模拟湿洗清洁和整理时的性能测试程序 |
|
| DIN EN ISO 3188-1994 |
淀粉及其制品.用克耶达(Kjeldahl)法测定含氮量.滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method (ISO 3188:1978); German version EN ISO 3188:1994 |
| DIN EN ISO 3219-1994 |
塑料.液态或起乳液或分散剂作用的聚合物/树脂.使用规定剪切率的旋转式粘度计测定粘度 |
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994 |
| DIN EN ISO 3231-1998 |
色漆和清漆.对含二氧化硫潮湿空气的耐抗性的测定 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993); German version EN ISO 3231:1997 |
| DIN EN ISO 3248-2000 |
涂料和清漆.热效应的测定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998); German version EN ISO 3248:2000 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com