标准号 |
中文名称 |
英文名称 |
DIN EN 61191-1-1999 |
印刷电路板组件.第1部分:总规范.使用表面安装和相关装配技术的焊接电气和电子组件的要求 |
(Printed board assemblies - Part 1: Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998); German version EN 61191-1:1998) |
DIN EN 61191-2-1999 |
印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求 |
(Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998); German version EN 61191-2:1998) |
DIN EN 61191-3-1999 |
印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求 |
(Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998); German version EN 61191-3:1998) |
DIN EN 61191-4-1999 |
印刷电路板组件.第4部分:分规范.端点焊接组件的要求 |
(Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998); German version EN 61191-4:1998) |
DIN EN 61192-3-2003 |
钎焊电子组件的工艺要求.第3部分:通孔安装组件 |
(Workmanship requirements for soldered electric assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002); German version EN 61192-3:2003) |
DIN EN 61193-1-2002 |
质量评定体系.第1部分:印制板组件缺陷注册和分析 |
(Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001); German version EN 61193-1:2002) |
DIN EN 61194-1996 |
独立式光生伏打系统的特征参数 |
(Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified); German version EN 61194:1995) |
DIN EN 61195-2000 |
双头荧光灯的安全规范 |
(Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999); German version EN 61195:1999) |
DIN EN 61196-2-1995 |
高频电缆规范.第2部分:聚四氟乙烯绝缘的半刚性高频电缆和同轴电缆.分规范 |
(Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification (IEC 61196-2:1993); German version EN 61196-2:1995) |
DIN EN 61196-2-2004 |
射频电缆.第2部分:聚四氟乙烯绝缘的半刚性射频电缆和同轴电缆分规范 |
|
DIN EN 61196-3-1999 |
高频电缆.第3部分:局域网用同轴电缆的分规范 |
(Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998); German version EN 61196-3:1998) |
DIN EN 61196-3-2-1998 |
高频电缆规范.第3-2部分:平面层布线数字通讯用同轴电缆.第2节:有效半径达到185m,速率在10Mb/s以下的局域网 |
(Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German ve |
DIN EN 61196-3-3-1998 |
高频电缆规范.第3部分:平面层布线数字通讯用同轴电缆.第3节:有效半径达到185m速率在10Mb/s(包括10Mb/s)的局 |
(Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring; Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997); German v |
DIN EN 61196-4-2004 |
同轴通信电缆.第4部分:辐射电缆的分规范 |
|
DIN EN 61197-1996 |
绝缘油.火焰线性传播.使用玻璃纤维的试验方法 |
(Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994) |
DIN EN 61198-1995 |
绝缘矿物油.糖醛和有关化合物的测定检验方法 |
(Mineral insulating oils - Methods for the determination of 2-furfurol and related compounds (IEC 61198:1993); German version EN 61198:1994) |
DIN EN 61199-2000 |
单头荧光灯.安全规范 |
(Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999); German version EN 61199:1999) |
DIN EN 612-1996 |
金属薄板制悬吊檐槽和雨水下落管.概念,分类和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classification and requirements; German version EN 612:1996) |
DIN EN 61202-1-2001 |
纤维光绝缘子.第1部分:一般规范 |
(Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000) |
DIN EN 61203-1995 |
电工用合成有机酯.设备中变压器酯的维护指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994) |
DIN EN 61204-2001 |
直流输出低压供电装置.性能特征 |
(Low-voltage power supply devices, d.c. output - Performance characteristics (IEC 61204:1993, modified + A1:2001); German version EN 61204:1995 + A1:2001) |
DIN EN 61204-3 Berichtigung 1-2004 |
DIN EN 61204-3-2001的技术勘误 |
|
DIN EN 61204-3-2001 |
直流输出低压供电装置.第3部分:电磁兼容性(EMC) |
(Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000) |
DIN EN 61204-6-2001 |
直流输出低压供电装置.第6部分:经过性能评定的低压供电装置的要求 |
(Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000); German version EN 61204-6:2001) |
DIN EN 61205-1995 |
超声学.牙齿除垢装置.产品性能说明及测试 |
(Ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics (IEC 61205:1993); German version EN 61205:1994) |
DIN EN 61207-1-1995 |
气体分析器的性能说明.第1部分:概述 |
(Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994); German version EN 61207-1:1994) |
DIN EN 61207-2-1995 |
气体分析器的性能说明.第2部分:气体中的氧(利用高温电化检测器) |
(Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994); German version EN 61207-2:1994) |
DIN EN 61207-3 Berichtigung 1-2003 |
DINEN61207-3-2002的勘误 |
(Corrigenda to DIN EN 61207-3:2002-11) |
DIN EN 61207-3-2002 |
气体分析仪.性能说明.第3部分:顺磁氧气分析仪 |
(Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002) |
DIN EN 61207-6-1995 |
气体分析仪的性能说明.第6部分:光度分析仪 |
(Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994) |
DIN EN 61209-2000 |
海上导航和无线电通讯设备和系统.集成桥系统(IBS).操作、性能要求、试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999); German version EN 61209:1999) |
DIN EN 61210-1995 |
连接装置.铜电导体的扁型速接终端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified); German version EN 61210:1995) |
DIN EN 61211-2005 |
标称电压1000V以上的架空线用陶瓷材料或玻璃绝缘子.空气中脉冲击穿试验 |
|
DIN EN 61212-1 Bb.1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.型号比较 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Comparision of types) |
DIN EN 61212-1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第1部分:一般要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995); German version EN 61212-1:1995) |
DIN EN 61212-2-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第2部分:检验方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995); German version EN 61212-2:1996) |
DIN EN 61212-3-1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第1节:圆型叠层卷绕管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995); German version EN 61212-3-1:1995) |
DIN EN 61212-3-2-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第2节:圆型模压管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995); German version EN 61212-3-2:1995) |
DIN EN 61212-3-3-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第3节:圆型模压棒 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995); German version EN 61212-3-3:1995) |
DIN EN 61213-1994 |
录像带上模拟声音录制.磁化极性 |
(Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994) |
DIN EN 61215-1996 |
晶体硅地表光伏电池(PV)组件.设计质量和型号认可 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993); German version EN 61215:1995) |
DIN EN 61217-1998 |
放射治疗设备.坐标系,移动和标度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996); German version EN 61217:1996) |
DIN EN 61217-2003 |
放射治疗设备.坐标系、移动和标度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996 + A1:2000); German version EN 61217:1996 + A1:2001) |
DIN EN 61219-1995 |
带电作业.喷枪式短路装置用的接地设备或接地舆短路设备 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing (IEC 61219:1993); German version EN 61219:1993) |
DIN EN 61221-1996 |
矿物油产品和润滑剂.三芳基-磷酸脂-涡轮机控制液体(类别ISO-L-TCD).要求 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993); German version EN 61221:1995) |
DIN EN 61223-2-5-2004 |
医用成像部门的评价及例行试验.第2-5部分:稳定性试验.图像显示装置 |
|
DIN EN 61223-2-6-1997 |
医疗X光放射科的评定和定期检验.第2-6部分:稳定性检验.计算机断层摄影用X光设备 |
(Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests; X-ray equipment for computed tomography (IEC 61223-2-6:1994); German version EN 61223-2-6:1994) |
DIN EN 61223-3-1-2001 |
医院成像科中的评定和常规试验.第3-1部分::验收试验.辐射照相和辐射显微照相系统用X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999) |
DIN EN 61223-3-2-2001 |
医疗X光放射科的评定和定期检验.第3-2部分:验收试验.乳腺X-射线设备成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996) |
DIN EN 61223-3-3-2000 |
医院成像科中的评定和常规试验.第3-3部分:验收试验.数字减法血管造影术(DSA)用X线透视设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996) |
DIN EN 61223-3-4-2001 |
医疗成像科中的评定和常规试验.第3-4部分:验收试验.牙科X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000) |
DIN EN 61228-1995 |
太阳浴用的紫外线灯紫外线辐射量的规定和测量方法 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993); German version EN 61228:1994) |
DIN EN 61228/A1-1997 |
太阳浴用的紫外线灯紫外线辐射量的规定和测量方法.补充件1 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993/A1:1996); German version EN 61228:1994/A1:1996) |
DIN EN 61229-1997 |
交流设备带电作业用刚性保护罩 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993, modified); German version EN 61229:1995) |
DIN EN 61229/A1-1999 |
交流设备带电作业用刚性保护罩.修正A1 |
(Rigid protective covers for live working on a.c. installations; Amendment A1 (IEC 61229:1993/A1:1998); German version EN 61229:1995/A1:1998) |
DIN EN 61229/A2-2003 |
交流设备上带电作业用刚性保护罩.修改件A2 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993/A2:2002); Amendment A2; German version EN 61229:1995/A2:2002) |
DIN EN 61230-1996 |
带电作业.便携式接地电路或接地短路电路设备 |
(Live working - Portable equipment for earthing or earthing and short-circuiting (IEC 61230:1993, modified); German version EN 61230:1995) |
DIN EN 61232-2001 |
电气设备用包铝钢丝 |
(Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000) |
DIN EN 61234-1-1994 |
电绝缘材料水解稳定性的试验方法.第1部分:塑料薄膜 |
(Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994) |
DIN EN 61234-2-1998 |
电绝缘材料.水解稳定性的试验方法.第2部分:模制热固材料 |
(Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998) |
DIN EN 61235-1997 |
带电作业.电工用绝缘空心管 |
(Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified); German version EN 61235:1995) |
DIN EN 61236-1996 |
带电作业用滑动座架,电杆夹及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified); German version EN 61236:1995) |
DIN EN 61237-1-1995 |
广播磁带录像机.测量方法.第1部分:技术要求 |
(Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994); German version EN 61237-1:1994) |
DIN EN 61237-2-1996 |
广播磁带录像机测量方法.第2部分:模拟合成录像信号的电气测量 |
(Methods of measurement for broadcast video tape recorders - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995); German version EN 61237-2:1995) |
DIN EN 61237-3-1995 |
广播磁带录像机测量方法.第3部分:模拟视频信号的电气测量 |
(Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995); German version EN 61237-3:1995) |
DIN EN 61237-4-1998 |
广播用磁带录像机.测量方法.第4部分:模拟音频信号的功率特性的测量 |
(Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997); German version EN 61237-4:1997) |
DIN EN 61238-1-2004 |
额定电压36kV(Um=42kV)及以下的电力电缆用压接和机械连接器.第1部分:试验方法和要求 |
|
DIN EN 61240-1997 |
压电装置.频率控制和选择用表面安装装置框图制备.总则 |
(Piezoelectric devices - Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection; General rules (IEC 61240:1994); German version EN 61240:1997) |
DIN EN 61241-1-2005 |
有可燃性粉尘场合用电气设备.第1部分:外壳防护tD型 |
|
DIN EN 61241-14-2005 |
有可燃性粉尘场合用电气设备.第14部分:选择和安装 |
|
DIN EN 61241-18-2005 |
有可燃性粉尘场合用电气设备.第18部分:封装mD型防护设备 |
|
DIN EN 61241-18-2005 |
有可燃性粉尘场合用电气设备.第18部分:封装mD型防护设备 |
|
DIN EN 61241-2-2-1996 |
用于易燃粉尘的电气设备.第2部分:检验方法.第1节:粉尘倾倒的电阻测定法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994); German version EN 61241-2-2:1995) |
DIN EN 61242-1997 |
电气安装材料.家用和类似用途的电缆盘 |
(Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified); German version EN 61242:1997) |
DIN EN 61242-2004 |
电气附件.家用和类似用途卷线盘 |
|
DIN EN 61243-1 Berichtigung 1-2001 |
DINEN61243-1-1998的技术勘误 |
(Corrigendum to DIN EN 61243-1 (VDE 0682 Teil 411):1998-05) |
DIN EN 61243-1-1998 |
带电作业.电压检测器.第1部分:1kV以上交流电压用容电器类型 |
(Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61243-1:1993 + A1:1997); German version EN 61243-1:1997 + A1:1997) |
DIN EN 61243-2-2001 |
带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻类型 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (includes Amendment A1:2000) (IEC 61243-2:1995 + A1:1999 + Corrigendum 2000); German version EN 61243-2:1997 + A1:2000) |
DIN EN 61243-2/A2-2003 |
带电作业.电压检测器.第2部分:1kV-36kV交流电压用电阻类型.修改件A2 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995/A2:2002); Amendment A2; German version EN 61243-2:1997/A2:2002) |
DIN EN 61243-3-1999 |
带电作业.电压检测器.第3部分:低压网用两极电压检测器 |
(Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998); German version EN 61243-3:1998) |
DIN EN 61243-5-2002 |
带电作业.电压检测器.第5部分:电压检测器(VDS) |
(Live working - Voltage detectors - Part 5: Voltage detective systems (VDS) (IEC 61243-5:1997, modified); German version EN 61243-5:2001) |
DIN EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997) |
DIN EN 61248-1-1998 |
电子和电信设备用变压器和电感器.第1部份:总规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997) |
DIN EN 61248-2-1998 |
电子和电信设备用变压器和电感器.第2部份:有合格认证的信号变压器用分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997) |
DIN EN 61248-3-1998 |
电子和电信设备用变压器和电感器.第3部份:有合格认证的电力变压器用分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997) |
DIN EN 61248-4-1998 |
电子和电信设备用变压器和电感器.第4部分:有合格认证的开关式供电用电力变压器的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German |
DIN EN 61248-5-1998 |
电子和电信设备用变压器和电感器.第5部分:有合格认证的脉冲变压器的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997) |
DIN EN 61248-6-1998 |
电子和电信设备用变压器和电感器.第6部分:有合格认证的电感器的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997) |
DIN EN 61248-7-1998 |
电子和电信设备用变压器和电感器.第7部分:以合格认证为基础的HF-电感器和ZF-变压器的分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); |
DIN EN 61249-2-10 Berichtigung 1-2005 |
印制板和其它互联结构用材料.第2-10部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被改良或未改良的氰酸酯溴化环氧编织E型玻璃纤维增强层压板 |
|
DIN EN 61249-2-10-2004 |
印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.规定了易燃性的包铜的改良或未改良的氰酸酯 |
(Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vert) |
DIN EN 61249-2-10-2004 |
印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.规定了易燃性的包铜的改良或未改良的氰酸酯溴化环氧树脂编织E型玻璃纤维增强层压板(垂直燃烧试验) |
|
DIN EN 61249-2-11 Berichtigung 1-2005 |
印制板和其他互联结构用材料.第2-11部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化环氧改良或非改良的编织E型玻璃纤维增强层压板 |
|
DIN EN 61249-2-11-2004 |
印制板和其它互连结构用材料.第2-11部分:包被和非包被增强基材料.阻燃型铜包被的聚酰亚胺溴化环氧改良或非改良的编织E型玻璃纤维增强叠层板材(垂直燃烧试验) |
|
DIN EN 61249-2-12-1999 |
印制板和其它互连结构用材料.第2-12部分:涂覆或未涂覆增强基底材料分规范集.限定可燃性的铜包被环氧树脂非 |
(Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad; epoxide non-woven aramid laminate of defined flammability, copper-clad (IEC 61249-2-12:1999); Germa |
DIN EN 61249-2-13-1999 |
印制板和其它互连结构用材料.第2-13部分:涂覆或未涂覆增强基底材料分规范集.限定可燃性的铜包被氰酸酯非编 |
(Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad; cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999); |
DIN EN 61249-2-18-2002 |
印制板和其它互连结构用材料.第2-18部分:包覆或非包覆增强基材.规定了易燃性的聚酯非编织玻璃纤维增强层压 |
(Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-18:2002); Ge |
DIN EN 61249-2-19-2002 |
印制板和其它互连结构用材料.第2-19部分:包被和非包被增强基材料.规定燃烧性的环氧交叉帘布层线性纤维玻璃 |
(Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC |
DIN EN 61249-2-21-2004 |
印制板和其它互连结构用材料.第2-21部分:包被和非包被增强基材料.阻燃型铜包被的非卤代环氧编织E型玻璃纤维增强叠层板材(垂直燃烧试验) |
|
DIN EN 61249-2-4-2002 |
印制板和其它互连结构用材料.第2-4部分:包被和非包被增强基材.规定了易燃性的覆铜聚酯非编织/编织玻璃纤维 |
(Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-4: |
DIN EN 61249-2-5 Berichtigung 1-2005 |
印制板和其他互联结构用材料.第2-5部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素纸增强芯/编织的E型玻璃增强表面层压板 |
|
DIN EN 61249-2-5-2004 |
印制板和其它互连结构用材料.第2-5部分:包被和非包被增强基材料.阻燃型铜包被的溴化环氧纤维素纸增强芯/编织E型玻璃纤维增强表面叠层板材(垂直燃烧试验) |
|
DIN EN 61249-2-6 Berichtigung 1-2005 |
印制板和其他互联结构用材料.第2-6部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧非编织/编织的E型玻璃增强表面层压板 |
|
DIN EN 61249-2-6-2004 |
印制板和其它互连结构用材料.第2-6部分:包被和非包被增强基材料.阻燃型铜包被的溴化环氧非编织/编织E型玻璃纤维增强叠层板材(垂直燃烧试验) |
|
DIN EN 61249-2-7-2002 |
印制板和其它互连结构用材料.第2-7部分:包被和非包被增强基材.规定了易燃性的环氧编织E级覆铜层压板(垂直燃 |
(Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-7:2002); German versio |
DIN EN 61249-2-8-2004 |
印制板和其它互连结构用材料.第2-8部分:包被和非包被增强基材.规定了易燃性的包铜的改良溴化环氧树脂编织玻 |
(Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-cla |
DIN EN 61249-2-8-2004 |
印制板和其它互连结构用材料.第2-8部分:包被和非包被增强基材.规定了易燃性的包铜的改良溴化环氧树脂编织玻璃纤维增强层压板(垂直燃烧试验) |
|
DIN EN 61249-2-9-2004 |
印制板和其它互连结构用材料.第2-9部分:包被和非包被增强基材.规定了易燃性的包铜的二顺丁烯二酰亚胺/三嗪 |
(Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical) |
DIN EN 61249-2-9-2004 |
印制板和其它互连结构用材料.第2-9部分:包被和非包被增强基材.规定了易燃性的包铜的二顺丁烯二酰亚胺/三嗪改良或未改良的环氧树脂编织E型玻璃纤维增强层压板(垂直燃烧试验) |
|
DIN EN 61249-3-3-1999 |
印制板和其它互连结构用材料.第3-3部分:涂覆和未涂覆非增强基底材料(用于挠性印制板)的分规范集.粘性涂覆挠 |
(Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyester film (IEC 61249-3-3:1999 |
DIN EN 61249-3-4-1999 |
印制板和其它互连结构用材料.第3-4部分:涂覆和未涂覆非增强基底材料(用于挠性印制板)的分规范集.粘性涂覆挠 |
(Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyimide film (IEC 61249-3-4:1999 |
DIN EN 61249-3-5-1999 |
印制板和其它互连结构用材料.第3-5部分:涂覆和未涂覆非增强基底材料(用于挠性印制板)的分规范集.贴花粘性薄 |
(Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); transfer adhesive films (IEC 61249-3-5:1999); German versio |
DIN EN 61249-5-1-1996 |
连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的分规范.第1节:铜箔(用于生产铜涂覆基材) |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings; section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995); German version EN |
DIN EN 61249-5-4-1997 |
连接结构用材料.第5部分:带或不带涂层的导电箔和薄膜的分规范.第4节:导电油墨 |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version EN 61249-5-4:1996) |
DIN EN 61249-7-1-1996 |
连接结构用材料.第7部分:紧约束芯材料分规范.第1节:铜/殷钢/铜 |
(Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials; section 1: Copper/Invar/copper (IEC 61249-7-1:1995); German version EN 61249-7-1:1995) |
DIN EN 61249-8-7-1997 |
连接结构用材料.第8部分:非导电薄膜和涂层用分规范.第7节:打印油墨 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; section 7: Marking legend inks (IEC 61249-8-7:1996); German version EN 61249-8-7:1996) |
DIN EN 61249-8-8-1998 |
连接结构用材料.第8部分:不导电薄膜和涂层分规范.第8节:临时性聚合物涂层 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; Section 8: Temporary polymer coatings (IEC 61249-8-8:1997); German version EN 61249-8-8:1997) |
DIN EN 61252-2003 |
电声学.专用测声表规范 |
(Electroacoustics - Specifications for personal sound exposure meters (IEC 61252:1993 + A1:2000); German version EN 61252:1995 + A1:2001) |
DIN EN 61254-1994 |
家用电动剃刀.性能测量法 |
(Electric shavers for household use - Methods for measuring the performance (IEC 61254:1993); German version EN 61254:1994) |
DIN EN 61255-1995 |
家用电热垫.性能测量方法 |
(Household electric heating pads - Methods for measuring performance (IEC 61255:1994); German version EN 61255:1994) |