标准号 |
中文名称 |
英文名称 |
BS EN 61188-5-2-2003 |
印制板及其组件.设计和使用.焊接(焊接区/接缝)的考虑.分立件 |
(Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Discrete components) |
BS EN 61188-5-6-2003 |
印制板和组件.设计和使用.附件条件.四面带有J形引线的片状载体 |
(Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Chip carriers with J-leads on four sides) |
BS EN 61189-1-1997 |
互连结构和附件用电气材料的试验方法.第1部分:一般试验方法和方法论 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - General test methods and methodology) |
BS EN 61189-2-1997 |
互连结构和附件用电气材料的试验方法.第2部分:互连结构用材料的试验方法 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Test methods for materials for interconnection structures) |
BS EN 61189-3-1997 |
互连结构和附件用电气材料的试验方法.第3部分:互连结构的试验方法(印制电路) |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Test methods for interconnection structures (printed boards)) |
BS EN 61190-1-1-2002 |
电子组件用的附件材料.电子组件中的优质互连接器用软焊钎助熔剂的要求 |
(Attachment materials for electronic assembly - Requirements for soldering fluxes for high-quality interconnections in electronics assembly) |
BS EN 61190-1-2-2002 |
电子组件用的附件材料.电子组件中的优质互连接器用固体涂胶 |
(Attachment materials for electronic assembly - Requirements for solder pastes for high-quality interconnections in electronic assembly) |
BS EN 61190-1-3-2002 |
电子组件用的附件材料.电子焊接设备用的电子分级焊料合金和助熔剂和非助熔剂的要求 |
(Attachment materials for electronic assembly - Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications) |
BS EN 61191-1-1999 |
印刷电路板组件.总规范.使用表面安装和相关装配技术的焊接电气和电子组件的要求 |
(Printed board assemblies - Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies) |
BS EN 61191-2-1999 |
印刷电路板组件.分规范.表面安装焊接组件的要求 |
(Printed board assemblies - Sectional specification - Requirements for surface mount soldered assemblies) |
BS EN 61191-3-1999 |
印刷电路板组件.分规范.通孔安装焊接组件的要求 |
(Printed board assemblies - Sectional specification - Requirements for through-hole mount soldered assemblies) |
BS EN 61191-4-1999 |
印刷电路板组件.分规范.端点焊接组件的要求 |
(Printed board assemblies - Sectional specification - Requirements for terminal soldered assemblies) |
BS EN 61192-1-2003 |
钎焊电子组件的工艺要求.总则 |
(Workmanship requirements for soldered electronic assemblies - General) |
BS EN 61192-2-2003 |
钎焊电子组件的工艺要求.表面安装组件 |
(Workmanship requirements for soldered electronic assemblies - Surface-mount assemblies) |
BS EN 61192-3-2003 |
钎焊电子组件的工艺要求.通孔安装组件 |
(Workmanship requirements for soldered electronic assemblies - Through-hole mount assemblies) |
BS EN 61192-4-2003 |
钎焊电子组件的工艺要求.终端组件 |
(Workmanship requirements for soldered electronic assemblies - Terminal assemblies) |
BS EN 61193-1-2002 |
质量评定体系.印制板装配件的缺陷注册和分析 |
(Quality assessment systems - Registration and analysis of defects on printed board assemblies) |
BS EN 61194-1996 |
独立式光电系统的特征参数 |
(Characteristic parameters of stand-alone photovoltaic (PV) systems) |
BS EN 61195-2000 |
双头荧光灯.安全规范 |
(Double-capped fluorescent lamps - Safety specifications) |
BS EN 61196-2-2003 |
射频电缆.规范.聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 |
(Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation) |
BS EN 61196-3-1999 |
射频电缆.规范.局域网用同轴电缆分规范 |
(Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks) |
BS EN 61196-3-2-1998 |
射频电缆.规范.水平地面线路数字通信用同轴电缆.工作半径为185m,每秒通过字节最高达10Mb的局域网用带固体电 |
(Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of) |
BS EN 61196-3-3-1998 |
射频电缆.规范.水平地面线路数字通信用同轴电缆.工作半径为185m,每秒通过字节达10Mb的局域网用带泡沫电介质 |
(Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks o) |
BS EN 61196-4-2004 |
射频电缆.规范.辐射电缆分规范 |
|
BS EN 61196-4-2004 |
同轴通信电缆.辐射电缆分规范 |
|
BS EN 61197-1996 |
绝缘油.火焰线性传播.使用玻璃纤维的试验方法 |
(Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape) |
BS EN 61198-1994 |
绝缘矿物油.2-糖和有关化合物的测定方法 |
(Mineral insulating oils - Methods for the determination of 2-furfural and related compounds) |
BS EN 61199-2000 |
单头荧光灯的安全规范 |
(Single-capped fluorescent lamps - Safety specifications) |
BS EN 612-1996 |
金属薄板制檐沟和雨水管.定义、分类和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classifications and requirements) |
BS EN 61202-1-2000 |
光纤绝缘子.总规范 |
(Fibre optic isolators - Generic specification) |
BS EN 61203-1995 |
电工用合成有机酯.设备中变压器酯的维护指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment) |
BS EN 61204-1995 |
直流输出低压供电装置.特性和安全要求 |
(Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements) |
BS EN 61204-3-2001 |
直流输出低压供电装置.电磁兼容性(EMC) |
(Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC)) |
BS EN 61204-6-2001 |
直流输出低压供电装置.经过性能评定的低压供电装置的要求 |
(Low voltage power supplies, d.c. output - Requirements for low-voltage power supplies of assessed performance) |
BS EN 61205-1994 |
超声学规范.牙齿除垢装置.产品性能说明及测试 |
(Specification for ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics) |
BS EN 61206-1995 |
超声.连续波多普勒系统的试验程序 |
(Ultrasonics - Continuous-wave Doppler systems - Test procedures) |
BS EN 61207-1-1994 |
气体分析器的性能说明.第1部分:概述 |
(Expression of performance of gas analyzers - General) |
BS EN 61207-2-1994 |
气体分析器的性能说明.第2部分:气体中的氧(利用高温电化检测器) |
(Expression of performance of gas analyzers - Oxygen in gas (utilizing high-temperature electrochemical sensors)) |
BS EN 61207-3-2003 |
气体分析器的性能说明.顺磁氧气分析器 |
(Expression of performance of gas analyzers - Paramagnetic oxygen analyzers) |
BS EN 61207-6-1994 |
气体分析仪的性能说明.第6部分:光度分析仪 |
(Expression of performance of gas analyzers - Photometric analyzers) |
BS EN 61209-1999 |
海上导航和无线电通信设备和系统.集成桥系统(IBS).操作和性能要求及试验方法和所要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results) |
BS EN 61210-1995 |
连接装置.铜电导体的扁型速接终端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements) |
BS EN 61212-1-1996 |
电工用工业刚性圆热固树脂层压管和棒材.总要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - General requirements) |
BS EN 61212-2-1996 |
电工用工业刚性圆热固树脂层压管和棒材.第2部分:试验方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test) |
BS EN 61212-3-1-1996 |
电工用工业刚性圆热固树脂层压管和棒材.第3部分:专用材料规范.活页1:圆层压轧制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes) |
BS EN 61212-3-2-1996 |
电工用工业刚性圆热固树脂层压管和棒材.第3部分:专用材料规范.活页2:圆层压压制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes) |
BS EN 61212-3-3-1996 |
电工用工业刚性圆热固树脂层压管和棒材.第3部分:专用材料规范.活页3:圆层压压制杆 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded rods) |
BS EN 61213-1994 |
录像带上模拟声音录制.磁化极性 |
(Analogue audio recording on video tape - Polarity of magnetization) |
BS EN 61215-1995 |
晶体硅地表光伏电池组件.设计质量和型式批准 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval) |
BS EN 61217-1997 |
放射疗法设备的坐标系、移动和刻度导则 |
(Guide to co-ordinates, movements and scales used for radiotherapy equipment) |
BS EN 61219-1994 |
带电作业.喷枪式短路装置用的接地设备或接地舆短路设备 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing) |
BS EN 61220-1995 |
超声波学.场.频率范围0.5MHz-15MHz超声波医疗设备含水听诊器引起的超声场的特性和测量指南 |
(Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz) |
BS EN 61221-1996 |
石油产品及润滑剂.三磷酸酯涡轮机控制液规范 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications) |
BS EN 61221-2004 |
石油产品及润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 |
|
BS EN 61221-2004 |
石油产品及润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 |
|
BS EN 61223-2-4-1995 |
医疗图像装置常规试验评定.恒定试验.硬复制摄影机的试验方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for hard copy cameras) |
BS EN 61223-2-5-1995 |
医疗图像装置常规试验评定.恒定试验.图像显示装置的试验方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for image display devices) |
BS EN 61223-2-6-1995 |
医疗图像部门常规试验和评定.恒定试验.计算层析X射线摄影机的方法 |
(Evaluation and routine testing in medical imaging departments - Constancy tests - Method for X-ray equipment for computed tomography) |
BS EN 61223-3-1-1999 |
医院成像科的评定和常规试验.验收试验.辐射照相和辐射显微照相系统用X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems) |
BS EN 61223-3-2-1997 |
医疗图像装置常规试验评定.乳腺X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of mammographic X-ray equipment) |
BS EN 61223-3-3-1997 |
医疗图像装置常规试验评定.数字减法血管造影术(DSA)用X射线的成像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA)) |
BS EN 61223-3-4-2000 |
医疗图像部门常规试验和评定.验收试验.牙科X射线设备的图像性能 |
(Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of dental X-ray equipment) |
BS EN 61223-3-5-2004 |
医疗成像部门的评价及常规试验.验收试验.计算机断层摄影X射线设备的成像性能 |
|
BS EN 61223-3-5-2004 |
医疗成像部门的评价及例行试验.验收试验.计算机断层摄影X射线设备的成像性能 |
|
BS EN 61223-3-5-2004 |
医疗成像部门的评价及例行试验.验收试验 |
|
BS EN 61228-1995 |
晒黑用紫外灯UV放射的测量方法 |
(Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning) |
BS EN 61229-1996 |
交流设备带电作业用刚性保护罩 |
(Rigid protective covers for live working on a.c. installations) |
BS EN 61230-1994 |
带电作业.接地或接地短路用便携式设备 |
(Live working - Portable equipment for earthing or earthing and short-circuiting) |
BS EN 61232-1997 |
电气用包铝钢丝线 |
(Aluminium-clad steel wires for electrical purposes) |
BS EN 61234-1-1994 |
电绝缘材料水解稳定性的试验方法.第1部分:塑料薄膜 |
(Method of test for hydrolytic stability of electrical insulating materials - Method of test for hydrolytic stability of electrical insulating materials - Plastic films) |
BS EN 61234-2-1998 |
电绝缘材料水解稳定性的试验方法.热铸模 |
(Method of test for hydrolytic stability of electrical insulating materials - Moulded thermosets) |
BS EN 61235-1994 |
带电作业.电工用绝缘空心管 |
(Live working - Insulating hollow tubes for electrical purposes) |
BS EN 61236-1994 |
带电作业用滑动座架、电杆夹及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working) |
BS EN 61237-1-1995 |
广播磁带录象机.测量方法.机械测量 |
(Broadcast video tape recorders - Methods of measurement - Mechanical measurements) |
BS EN 61237-2-1995 |
广播磁带录像机.测量方法.模拟复合视频信号的电气测量 |
(Broadcast video tape recorders - Methods of measurement - Electrical measurements of analogue composite video signals) |
BS EN 61237-3-1995 |
广播磁带录像机.测量方法.模拟部件视频信号的电气测量 |
(Broadcast video tape recorders - Methods of measurement - Electrical measurements for analogue component video signals) |
BS EN 61237-4-1998 |
广播磁带录像机.测量方法.第4部分:模拟音频性能测量 |
(Broadcast video tape recorders - Methods of measurement - Analogue audio performance measurements) |
BS EN 61238-1-2003 |
额定电压为36KV(Um=42 kV)及以下的电力电缆用压接和机械连接器.试验方法和要求 |
(Compression and mechanical connectors for power cables for rated voltages up to 36 kV (UDOWNm = 42 kV) - Test methods and requirements) |
BS EN 61240-1997 |
压电装置.频率控制和选择用表面安装装置框图制备.总则 |
(Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules) |
BS EN 61241-10-2004 |
有可燃性粉尘场合用电气设备.可燃性粉尘所在区域的分类 |
|
BS EN 61241-14-2004 |
有可燃性粉尘场所用电气设备.选择和安装 |
|
BS EN 61241-17-2005 |
可燃性粉尘环境中用电气装置.危险场所中(矿山除外)电气装置的检验和维修 |
|
BS EN 61241-18-2004 |
有可燃性粉尘场所用电气设备.封装mD型防护设备 |
|
BS EN 61241-2-2-1996 |
易燃灰尘场地中用电子设备.第2部分:试验方法.第2节:灰尘层中电阻系数的测定方法 |
(Electrical apparatus for use in the presence of combustible dust - Test methods - Method for determining the electrical resistivity of dust in layers) |
BS EN 61242-1998 |
电气附件.家用和类似用途的电缆卷轴 |
(Electrical accessories - Cable reels for household and similar purposes) |
BS EN 61243-1-1998 |
现场工作.电压检测器.第1部分:超过1kV的交流电压用容电器类型 |
(Live working - Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV a.c.) |
BS EN 61243-1-2005 |
带电作业.电压检测器.电压超过交流1kV用电容型 |
|
BS EN 61243-2-1998 |
带电作业.电压探测器.1kV-36kV交流电压用电阻类型 |
(Live working - Voltage detectors - Resistive type to be used for voltages of 1 kV to 36 kV a.c.) |
BS EN 61243-3-1999 |
带电作业.电压检测器.两极低压型 |
(Live working - Voltage detectors - Two-pole low voltage type) |
BS EN 61243-5-2001 |
带电作业.电压检测器.电压检测系统(VDS) |
(Live working - Voltage detectors - Voltage detecting systems (VDS)) |
BS EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions) |
BS EN 61248-1-1997 |
电子和电信设备用变压器和电感器.第1部分:总规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Generic specification) |
BS EN 61248-2-1997 |
电子和电信设备用变压器和电感器.第2部分:在可能批准程序基础上信号变压器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for signal transformers on the basis of the capability approval procedure) |
BS EN 61248-3-1997 |
电子和电信设备用变压器和电感器.第3部分:在可能批准程序基础上电力变压器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for power transformers on the basis of the capability approval procedure) |
BS EN 61248-4-1997 |
电子和电信设备用变压器和电感器.第4部分:在可能批准程序基础上转换供电方式的电力变压器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability) |
BS EN 61248-5-1997 |
电子和电信设备用变压器和电感器.第5部分:在可能批准程序基础上脉冲变压器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for pulse transformers on the basis of the capability approval procedure) |
BS EN 61248-6-1997 |
电子和电信设备用变压器和电感器.第6部分:在可能批准程序基础上电感器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for inductors on the basis of the capability approval procedure) |
BS EN 61248-7-1998 |
电子和电信设备用变压器和电感器.第7部分:以性能认证程序为基础的高频电感器和中频变压器分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability app) |
BS EN 61249-2-1-2005 |
印制板和其它互连结构用材料.包被和非包被增强基材.酚醛纤维素纸增强铜包被经济级叠层板 |
|
BS EN 61249-2-10-2003 |
互连结构用材料.包被和非包被增强基材分规范.包被和非包被增强基材.规定了易燃性的包铜改良或未改良的氰酸 |
() |
BS EN 61249-2-11-2004 |
互联结构用材料.包被和非包被增强基材的分规范集.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化环氧改良或非改良的编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-11-2004 |
互联结构用材料.包被和非包被增强基材的分规范集.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化环氧改良或非改良的编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-11-2004 |
印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化环氧改良或非改良的编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-12-1999 |
互联结构材料.包被和非包被的加强基质材料的分规范.阻燃环氧衍生物叠层板材.铜包被 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad) |
BS EN 61249-2-13-1999 |
连接结构用材料.增强的涂覆和未涂覆材料分规范组.规定易燃性的铜涂覆氰酸盐酯非织造芳族叠层板材 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper-clad) |
BS EN 61249-2-18-2002 |
互连结构用材料.包被和非包被增强基材分规范.规定了易燃性的覆铜非编织玻璃纤维增强层压板(垂直燃烧试验) |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammabilit) |
BS EN 61249-2-19-2002 |
互连结构用材料.包被和非包被增强基材分规范.规定了易燃性的环氧交叉帘布层线性纤维玻璃增强包铜的叠层板( |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined fla) |
BS EN 61249-2-21-2004 |
互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的非卤化环氧编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-21-2004 |
互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的非卤化环氧编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-21-2004 |
印制板和其他互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的非卤化环氧编织E型玻璃纤维增强层压板材 |
|
BS EN 61249-2-22-2005 |
印制板和其他互连结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的改良的非卤化环氧编织E型玻璃纤维层压板 |
|
BS EN 61249-2-23-2005 |
印制板和其他互连结构用材料.包被和非包被增强基材.铜包被的经济级非卤化酚醛纤维素纸增强层压板 |
|
BS EN 61249-2-26-2005 |
印制板和其他互连结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的非卤化环氧非编织/编织E型玻璃纤维增强层压板 |
|
BS EN 61249-2-4-2002 |
互连结构用材料.包被和非包被增强基材分规范.规定了易燃性的覆铜聚酯非编织/编织玻璃纤维层压板(垂直燃烧试 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (ve) |
BS EN 61249-2-5-2004 |
印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素纸增强芯/编织的E型玻璃纤维增强表面层压板 |
|
BS EN 61249-2-5-2004 |
互联结构用材料.包被和非包被增强基材的分规范集.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素纸增强芯/编织的E型玻璃纤维增强表面层压板 |
|
BS EN 61249-2-5-2004 |
互联结构用材料.包被和非包被增强基材的分规范集.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素纸增强芯/编织的E型玻璃纤维增强表面层压板 |
|
BS EN 61249-2-6-2004 |
印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧非编织/编织的E型玻璃纤维增强层压板 |
|
BS EN 61249-2-6-2004 |
互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的溴化环氧非编织/编织的E型玻璃纤维增强表面层压板 |
|
BS EN 61249-2-6-2004 |
互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的溴化环氧非编织/编织的E型玻璃纤维增强层压板 |
|