标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 16101-2004 |
包装.危险货物的运输包装.塑料的兼容性试验 |
|
| DIN EN ISO 16103-2005 |
包装.危险物品的运输包装.再循环的塑料 |
|
| DIN EN ISO 16147-2003 |
小艇.艇内柴油发动机.装在发动机上的燃料和电气件 |
(Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002); German version EN ISO 16147:2002) |
| DIN EN ISO 1622-1-1999 |
塑料.聚苯乙烯(PS)模塑与注塑材料.第1部分:命名与基础规范 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994); German version EN ISO 1622-1:1999) |
| DIN EN ISO 1622-2-1999 |
塑料.聚苯乙烯(PS)模塑与挤塑材料.第2部分:试样制备与特性测定 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999) |
| DIN EN ISO 1624-2002 |
塑料.氯乙烯均聚物和共聚物树脂.水滤筛析 |
(Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001); German version EN ISO 1624:2001) |
| DIN EN ISO 16264-2004 |
水质.用流动分析(FIA和CFA)法和光度检测法测定可溶性硅酸盐 |
|
| DIN EN ISO 1628-1-1998 |
塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第1部分:一般原理 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998); German version EN ISO 1628-1:1998) |
| DIN EN ISO 1628-2-1999 |
塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第2部分:聚氯乙烯树脂 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998) |
| DIN EN ISO 1628-3-1999 |
塑料.粘度值和极限粘度值的测定.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity number and limiting viscosity number - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:1991, including Technical Corrigendum 1:1992); German version EN ISO 1628-3:1999) |
| DIN EN ISO 1628-3-2003 |
塑料.用毛细管粘度计测定稀溶液中聚合物的粘度.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2001); German version EN ISO 1628-3:2003) |
| DIN EN ISO 16284-2001 |
眼科光学.眼科光学设备的信息交换 |
(Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001); German version EN ISO 16284:2001) |
| DIN EN ISO 16330-2004 |
往复运动变容真空泵和泵装置.技术要求 |
|
| DIN EN ISO 16408-2004 |
牙科学.口腔卫生产品.口腔清洗 |
|
| DIN EN ISO 16426-2003 |
紧固件.质量保证体系 |
(Fasteners - Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002) |
| DIN EN ISO 16484-2-2004 |
建筑物自动化和控制系统.第2部分:硬件 |
|
| DIN EN ISO 16484-3-2005 |
建筑自动化和控制系统(BACS).第3部分:功能 |
|
| DIN EN ISO 16484-5-2004 |
建筑物自动化和控制系统.第5部分:数据通信协议 |
|
| DIN EN ISO 16582-2003 |
开口型盘头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002) |
| DIN EN ISO 16583-2003 |
开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002) |
| DIN EN ISO 16584-2003 |
开口型盘头抽芯盲铆钉.NiCu/St或NiCu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002) |
| DIN EN ISO 16585-2003 |
封闭型盘头抽芯盲铆钉.A2/SSt |
(Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002) |
| DIN EN ISO 16588-2004 |
水质.六络合反应物的测定.气相色谱法 |
(Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002); German version EN ISO 16588:2003) |
| DIN EN ISO 16588-2004 |
水质.六络合反应物的测定.气相色谱法 |
|
| DIN EN ISO 16654-2001 |
食品和动物饲料的微生物学.大肠杆菌O157检测的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001); German version EN ISO 16654:2001) |
| DIN EN ISO 1666-1998 |
淀粉.水含量的测定.烘箱干燥法 |
(Starch - Determination of moisture content - Oven-drying method (ISO 1666:1996); German version EN ISO 1666:1997) |
| DIN EN ISO 16663-2-2003 |
捕鱼网.网眼尺寸测定的试验方法.第2部分:网眼长度 |
(Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2002); German version EN ISO 16663-2:2003) |
| DIN EN ISO 16671-2004 |
眼科植入物.眼科手术用冲洗液 |
|
| DIN EN ISO 16672-2003 |
外科植入物.眼内填塞 |
(Ophthalmic implants - Ocular endotamponades (ISO 16672:2003); German version EN ISO 16672:2003) |
| DIN EN ISO 16744-2004 |
牙科学.固定的牙齿修复用基本金属材料 |
|
| DIN EN ISO 1675-1998 |
塑料.液态树脂.用比重计法测定浓度 |
(Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998) |
| DIN EN ISO 1680-2000 |
声学.测量旋转电机排放的空气噪声的试验规范 |
(Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999) |
| DIN EN ISO 16812-2005 |
石油和天然气工业.壳管式热交换器 |
|
| DIN EN ISO 16812-2005 |
石油和天然气工业.壳管式热交换器 |
|
| DIN EN ISO 16931-2002 |
动植物脂肪和油.高效尺寸筛析色谱法(HPSEC)测定聚合甘油三酸酯含量 |
(Animal and vegetable fats and oils - Determination of polymerized triglyceride content by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001); German version EN ISO 16931:2001) |
| DIN EN ISO 1716-2002 |
建筑产品对火焰试验的反应.燃烧热的测定 |
(Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002); German version EN ISO 1716:2002) |
| DIN EN ISO 17189-2004 |
黄油、可食用油乳剂和可涂脂肪.脂肪含量的测定(参照法) |
(Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003); German version EN ISO 17189:2003) |
| DIN EN ISO 17189-2004 |
黄油、可食用油乳剂和可涂脂肪.脂肪含量的测定(参照法) |
|
| DIN EN ISO 172-1998 |
塑料.酚醛塑料模制件.游离氨的检测 |
(Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998) |
| DIN EN ISO 17201-1-2005 |
声学.射程内噪声.第1部分:枪口炸震的测定 |
|
| DIN EN ISO 17249-2004 |
防止链锯切割的安全鞋靴 |
|
| DIN EN ISO 17292-2004 |
石油、石油化学和相关工业用金属球阀 |
|
| DIN EN ISO 17294-2-2005 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| DIN EN ISO 17353-2005 |
水质.选定的有机化合物的测定.气体色谱法 |
|
| DIN EN ISO 1736-2000 |
奶粉和奶粉制品.脂肪含量的测定.重量分析法(参照法) |
(Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000); German version EN ISO 1736:2000) |
| DIN EN ISO 1737-2000 |
淡炼乳和甜炼乳.脂肪含量的测定.重量法(参照法) |
(Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999); German version EN ISO 1737:1999) |
| DIN EN ISO 1741-1994 |
葡萄糖.干燥后质量损失的测定.真空烘箱法 |
(Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980); German version EN ISO 1741:1994) |
| DIN EN ISO 1746-2000 |
橡胶或塑料软管和管道.弯曲试验 |
(Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000) |
| DIN EN ISO 17495-2003 |
水质.选定的硝基本酚的测定.固相萃取法和带有质量光谱探测的气相色谱法 |
(Water quality - Determination of selected nitrophenols - Method by solid phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001); German version EN ISO 17495:2003) |
| DIN EN ISO 175-2000 |
塑料.浸入液体化学药品的影响测定的试验方法 |
(Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); German version EN ISO 175:2000) |
| DIN EN ISO 17510-1-2002 |
睡眠窒息呼吸治疗.第1部分:睡眠窒息呼吸治疗设备 |
(Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy devices (ISO 17510-1:2002); German version EN ISO 17510-1:2002) |
| DIN EN ISO 17510-2-2003 |
睡眠窒息呼吸治疗.第2部分:面具和使用附件 |
(Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2003); German version EN ISO 17510-2:2003) |
| DIN EN ISO 176-1999 |
塑料.增塑剂损耗的测定.活性碳法 |
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:1976); German version EN ISO 176:1999 |
| DIN EN ISO 176-2005 |
塑料.增塑剂损耗的测定.活性碳法 |
|
| DIN EN ISO 17641-1-2004 |
金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则 |
|
| DIN EN ISO 17642-1-2004 |
金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则 |
|
| DIN EN ISO 17652-1-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第1部分:一般要求 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003); German version EN ISO 17652-1:2003) |
| DIN EN ISO 17652-2-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第2部分:工厂底漆的焊接性能 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003); German version EN ISO 17652-2:2003) |
| DIN EN ISO 17652-3-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第3部分:热切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003) |
| DIN EN ISO 17652-4-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第4部分:焊接烟尘和气体的排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003) |
| DIN EN ISO 17653-2003 |
金属材料焊缝的破坏检验.电阻点焊的扭转试验 |
Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003 |
| DIN EN ISO 17654-2003 |
金属材料焊缝的破坏检验.电阻焊接.电阻缝焊的压力试验 |
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
| DIN EN ISO 17655-2003 |
金属材料焊缝的破坏检验.δ铁素体测量用样品的准备方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003 |
| DIN EN ISO 17664-2004 |
医疗设备的消毒.由生产商提供的可再消毒医疗设备的处理过程的信息 |
|
| DIN EN ISO 17693-2005 |
鞋靴.鞋帮的试验方法.耐磨损性 (ISO 17693-2004); 德文版本 EN ISO 17693-2005 |
|
| DIN EN ISO 17695-2005 |
鞋靴.鞋帮试验方法.变形性(ISO 17695-2004); 德文版本 EN ISO 17695-2005 |
|
| DIN EN ISO 177-1999 |
塑料.增塑剂扩散的测定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999 |
| DIN EN ISO 17700-2005 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
| DIN EN ISO 17707-2005 |
鞋靴.外底试验方法.耐弯性 |
|
| DIN EN ISO 178-1997 |
塑料.弯曲性能测定 |
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 |
| DIN EN ISO 178-2003 |
塑料.弯曲性能测定 |
(Plastics - Determination of flexural properties (ISO 178:2001); German version EN ISO 178:2003) |
| DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003) |
| DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
|
| DIN EN ISO 17836-2005 |
热喷涂.热喷涂熔敷效率的测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 179-1-2001 |
塑料.摆式冲击特性测定.第1部分:非仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000 |
| DIN EN ISO 179-2-2000 |
塑料.摆锤式冲击特性的测定.第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
| DIN EN ISO 1797-1-1999 |
牙科用旋转器具.柄.第1部分:金属柄 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
| DIN EN ISO 1797-2-1995 |
牙科用旋转器具.柄.第2部分:塑料柄 |
Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
| DIN EN ISO 1798-2000 |
柔性泡沫聚合材料.抗拉强度和断裂时延伸率的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997); German version EN ISO 1798:1999 |
| DIN EN ISO 17993-2004 |
水质.用液-液萃取后的荧光探测高效液相色谱法(HPLC)测定水中的15环芳香烃(PAH) |
|
| DIN EN ISO 17994-2004 |
水质.确定微生物方法之间等效性的标准 |
|
| DIN EN ISO 180-2001 |
塑料.伊兆特(Izod)冲击强度的测定 |
Plastics - Determination of Izod impact strength (ISO 180:2000); German version EN ISO 180:2000 |
| DIN EN ISO 1806-2003 |
鱼网.测定拉网的筛网断裂力 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002); German version EN ISO 1806:2002 |
| DIN EN ISO 18064-2005 |
热塑性弹性体.术语和简化术语 |
|
| DIN EN ISO 18064-2005 |
热塑性弹性体.术语和简化术语 |
|
| DIN EN ISO 18104-2004 |
医疗信息学.护理用参考术语模式的综合 |
|
| DIN EN ISO 182-2-2000 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成 其它酸性制品的趋势的测定.第2部分:pH值法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version |
| DIN EN ISO 182-3-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成氯化氢和其它酸性制品的趋势的测定.第3部分:电导分析法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); Ger |
| DIN EN ISO 182-4-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成氯化氢和其它酸性制品的趋势的测定.第4部分:电位测量法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger |
| DIN EN ISO 18265-2004 |
金属材料.硬度值的换算 |
(Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003) |
| DIN EN ISO 18265-2004 |
金属材料.硬度值的换算 |
|
| DIN EN ISO 18273-2004 |
焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类 |
|
| DIN EN ISO 18274-2004 |
焊接消耗品.镍和镍合金熔焊用实心焊丝、条和棒材.分类 |
|
| DIN EN ISO 18278-1-2005 |
电阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 |
|
| DIN EN ISO 18278-2-2005 |
电阻焊.可焊性.第2部分:点焊用薄钢板评定用备用程序 |
|
| DIN EN ISO 18279-2004 |
铜焊.铜焊接头的缺陷 |
|
| DIN EN ISO 183-1999 |
塑料.着色剂渗色的定性评估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976); German version EN ISO 183:1999 |
| DIN EN ISO 1854-2000 |
乳清干酪.脂肪含量的测定.重量分析法(参照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999); German version EN ISO 1854:1999 |
| DIN EN ISO 1856-2001 |
泡沫柔性聚合材料.压缩变形的测定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000); German version EN ISO 1856:2000 |
| DIN EN ISO 186-2002 |
纸和纸板.测定平均质量取样 |
Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| DIN EN ISO 18609-2002 |
动植物脂肪和油.不皂化物测定.己烷提取法(ISO 18609:2000) |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000); German version EN ISO 18609:2001 |
| DIN EN ISO 18613-2003 |
木制平托盘的修理 |
(Repair of flat wooden pallets (ISO 18613:2003); German version EN ISO 18613:2003) |
| DIN EN ISO 1872-1-1999 |
塑料.聚乙烯(PE)模塑和挤制材料.第1部分:命名与基础规范 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993); German version EN ISO 1872-1:1999 |
| DIN EN ISO 1872-2-2000 |
塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1872-2:1997 + A1:2000 |
| DIN EN ISO 1873-1-1995 |
塑料.聚丙烯(PP)模塑和挤塑材料.第1部分:名称与符号系统和规范基础 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995 |
| DIN EN ISO 1873-2-2000 |
塑料.聚丙烯(PP)模塑和挤制材料.第2部分:试样制备和性能测定 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1873-2:1997 + A1:2000 |
| DIN EN ISO 1874-1-2001 |
塑料.注塑和挤压用聚酰胺(PA)模塑材料.第1部分:名称与符号 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992); German version EN ISO 1874-1:2000 |
| DIN EN ISO 1874-2-1996 |
塑料.注塑和挤压用聚酰胺(PA)模塑材料.第2部分:试样的制备和性能的测定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995); German version EN ISO 1874-2:1995 |
| DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
| DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
| DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
| DIN EN ISO 18779-2005 |
储存氧和氧混合物的医疗设备.特殊要求 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com