标准号 |
中文名称 |
英文名称 |
DIN EN ISO 15011-2-2003 |
焊接和相关工艺中的保健和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率的 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003); German version EN ISO 15011-2:2003) |
DIN EN ISO 15011-3-2003 |
焊接和相关工艺的健康和安全.电弧焊产生的烟和气体取样的实验室法.第3部分:用固定点法测定臭氧浓度 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002); German version EN ISO 15011-3:200 |
DIN EN ISO 15013-1999 |
聚丙烯挤压片材(PP).要求和试验方法 |
(Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:1998); German version EN ISO 15013:1998) |
DIN EN ISO 15025-2003 |
防护服.防热和防火.限制火焰扩散的试验方法 |
(Protective clothing - Protection against heat and flame - Method of test for limited flame spread (ISO 15025:2000); German version EN ISO 15025:2002) |
DIN EN ISO 15027-1-2002 |
浸水服装.第1部分:日常工作服.要求和安全性 |
(Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2002); German version EN ISO 15027-1:2002) |
DIN EN ISO 15027-2-2002 |
浸水服装.第2部分:废弃服装.要求和安全性 |
(Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2002); German version EN ISO 15027-2:2002) |
DIN EN ISO 15027-3-2002 |
浸水服装.第3部分:试验方法 |
(Immersion suits - Part 3: Test methods (ISO 15027-3:2002); German version EN ISO 15027-3:2002) |
DIN EN ISO 15029-1-2002 |
石油和相关产品.耐火液体喷射点燃特性的测定.第1部分:喷射火焰持久性.空心喷射器法 |
(Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999) |
DIN EN ISO 15061-2001 |
水质.不溶溴酸盐含量的测定.离子液相色谱法 |
(Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001) |
DIN EN ISO 15065-2005 |
头部外形合乎ISO 7721标准的沉头螺钉的埋头孔 |
|
DIN EN ISO 15065-2005 |
头部外形合乎ISO 7721标准的沉头螺钉的埋头孔 |
|
DIN EN ISO 15083-2003 |
小艇.舱底泵吸系统 |
(Small craft - Bilge pumping systems (ISO 15083:2003); German version EN ISO 15083:2003) |
DIN EN ISO 15084-2003 |
小艇.投锚、停泊和牵引.靠船墩 |
(Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003); German version EN ISO 15084:2003) |
DIN EN ISO 15087-1-2002 |
牙科起子.第1部分:一般要求(ISO15087-1:1999) |
(Dental elevators - Part 1: General requirements (ISO 15087-1:1999); German version EN ISO 15087-1:2001) |
DIN EN ISO 15087-2-2000 |
牙科起子.第2部分:沃里克吉姆斯起子 |
(Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000) |
DIN EN ISO 15087-3-2000 |
牙科起子.第3部分:Cryer起子 |
(Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000) |
DIN EN ISO 15087-4-2000 |
牙科起子.第4部分:Coupland起子 |
(Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000) |
DIN EN ISO 15087-5-2000 |
牙科起子.第5部分:Bein起子 |
(Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000) |
DIN EN ISO 15087-6-2000 |
牙科起子.第6部分:Flohr起子 |
(Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000) |
DIN EN ISO 15098-1-2001 |
牙科镊子.第1部分:一般要求 |
(Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001) |
DIN EN ISO 15098-2-2000 |
牙科镊子.第2部分:Meriam型 |
(Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000) |
DIN EN ISO 15098-3-2000 |
牙科镊子.第3部分:学院型 |
(Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000) |
DIN EN ISO 15103-1-2004 |
塑料.聚苯撑醚模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
DIN EN ISO 15103-2-2004 |
塑料.聚苯撑醚模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
DIN EN ISO 15119-2004 |
包装.袋.添装袋的摩擦测定 |
|
DIN EN ISO 1513-1994 |
色漆和清漆.试验样品的检验和制备 |
(Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992); German version EN ISO 1513:1994) |
DIN EN ISO 15136-1-2002 |
石油和天然气工业的钻孔设备.人工升降梯的空腔泵系统.第1部分:泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001) |
DIN EN ISO 15138-2003 |
石油和天然气工业.海上生产设备.加热、通风和空调设备 |
(Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002) |
DIN EN ISO 1514-1997 |
漆和涂层材料.标准试样板 |
(Paints and varnishes - Standard panels for testing (ISO 1514:1993); German version EN ISO 1514:1997) |
DIN EN ISO 1514-2005 |
色漆和清漆.试验用标准板 |
|
DIN EN ISO 15141-1-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第1部分:硅胶净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998); German version EN ISO 15141-1:1998) |
DIN EN ISO 15141-2-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第2部分:重碳酸盐净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998); German version EN ISO 15141-2:1998) |
DIN EN ISO 15147-1999 |
轻型运输机皮带.轻型运输机皮带交叉宽度和长度的公差 |
(Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:1999); German version EN ISO 15147:1999) |
DIN EN ISO 15148-2003 |
建筑材料和产品的水热吸收性.用颗粒浸湿法测定水吸收系数 |
(Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002); German version EN ISO 15148:2002) |
DIN EN ISO 15156-1-2003 |
石油和天然气工业.在石油和天然气生产中用于含H2S环境的材料.第1部分:耐裂材料选择的一般原则 |
(Petroleum and natural gas industries - Material for use in HS-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001) |
DIN EN ISO 15156-2-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
DIN EN ISO 15156-2-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
DIN EN ISO 15156-3-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
DIN EN ISO 15156-3-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
DIN EN ISO 1516-2002 |
闪点/无闪点测定.闭杯平衡法 |
(Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002); German version EN ISO 1516:2002) |
DIN EN ISO 1517-1995 |
色漆和清漆.表面干燥试验.微球体法 |
(Paints and varnishes - Surface-drying test - Ballotini method (ISO 1517:1973); German version EN ISO 1517:1995) |
DIN EN ISO 1518-2000 |
涂料和清漆.刮痕试验 |
(Paints and varnishes - Scratch test (ISO 1518:1992); German version EN ISO 1518:2000) |
DIN EN ISO 15181-1-2004 |
涂料和清漆.防虫漆的杀虫剂释放率测定.第1部分:杀虫剂萃取的一般方法 |
|
DIN EN ISO 15181-2-2004 |
色漆和清漆.从防虫漆释放杀虫剂速率的测定.第2部分:萃取物中铜离子浓度的测定和释放速率的计算 |
|
DIN EN ISO 15187-2003 |
操纵工业机器人.机器人程序设计和操纵的图形使用者接口 |
(Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) (ISO 15187:2000); German version EN ISO 15187:2002) |
DIN EN ISO 1519-1995 |
色漆和清漆.弯曲试验(圆心轴) |
(Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:1973); German version EN ISO 1519:1995) |
DIN EN ISO 15195-2004 |
实验室医学.参考测量实验室要求 |
(Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003) |
DIN EN ISO 15195-2004 |
实验室医学.参考测量实验室要求 |
|
DIN EN ISO 15197 Berichtigung 1-2005 |
体外诊断试验系统.糖尿病症管理中自测用血糖监测系统的要求.DIN EN ISO 15197-2004的勘误 |
|
DIN EN ISO 15197-2004 |
体外诊断试验系统.糖尿病症处理中自测试用血液葡萄糖监测系统的要求 |
|
DIN EN ISO 1520-2002 |
涂料和清漆.杯突试验 |
(Paints and varnishes - Cupping test (ISO 1520:1999); German version EN ISO 1520:2001) |
DIN EN ISO 15212-1-1999 |
摆动式密度计.第1部分:实验室仪器 |
(Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998); German version EN ISO 15212-1:1999) |
DIN EN ISO 15212-2-2002 |
摆动式密度计.第2部分:同质液体测量仪器 |
(Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002) |
DIN EN ISO 1522-2000 |
涂料和清漆.摆杆阻尼试验 |
(Paints and varnishes - Pendulum damping test (ISO 1522:1998); German version EN ISO 1522:2000) |
DIN EN ISO 15225-2000 |
命名.数据交换管理用医疗设备的命名系统规范 |
(Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000); German version EN ISO 15225:2000) |
DIN EN ISO 15225-2005 |
命名.用于管理资料交流的医疗器械命名系统规范 |
|
DIN EN ISO 1523-2002 |
闪点测定.闭杯平衡法 |
(Determination of flash point - Closed cup equilibrium method (ISO 1523:2002); German version EN ISO 1523:2002) |
DIN EN ISO 15236-2-2004 |
衬钢丝绳芯传送带.第2部分:选用带类型 |
|
DIN EN ISO 15236-4-2004 |
衬钢丝绳芯传送带.第4部分:硬化带接头 |
|
DIN EN ISO 1524-2002 |
涂料、清漆和印刷油墨.研磨细度测定 |
(Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2000); German version EN ISO 1524:2002) |
DIN EN ISO 15245-1-2003 |
储气瓶.连接气瓶阀的平行螺纹.第1部分:规范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001) |
DIN EN ISO 15245-2-2002 |
储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001) |
DIN EN ISO 15252-1-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999) |
DIN EN ISO 15252-2-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999) |
DIN EN ISO 15252-3-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999) |
DIN EN ISO 15253-2001 |
眼科光学和设备.增强弱视的光学装置 |
(Ophthalmic optics and instruments - Optical devices for enhancing low-vision (ISO 15253:2000); German version EN ISO 15253:2000) |
DIN EN ISO 15254-2003 |
眼科光学和仪器.提高视力用电子光学器件 |
(Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision (ISO 15254:2002); German version EN ISO 15254:2002) |
DIN EN ISO 15265-2004 |
热环境的人类工效学.热工作环境中防止压力和不适的风险评估策略 |
|
DIN EN ISO 1530-2003 |
渔网.编织网的名称与符号和说明 |
(Fishing nets - Description and designation of knotted netting (ISO 1530:2003); German version EN ISO 1530:2003) |
DIN EN ISO 15301-2002 |
动植物脂肪和油.粗脂肪和原油中沉积物的测定.离心法 |
(Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001) |
DIN EN ISO 15304-2002 |
动植物脂肪和油.植物脂肪和油的过脂肪酸异构体含量测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002); German version EN ISO 15304:2002) |
DIN EN ISO 15310-2005 |
纤维增强塑料复合材料.用板捻法测定内剪模量 |
|
DIN EN ISO 15318-1999 |
纸浆、纸和纸板.7个指定的多氯联苯的测定 |
(Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999); German version EN ISO 15318:1999) |
DIN EN ISO 15320-2004 |
纸浆、纸张和纸板.水提出物中五氯苯酚的测定 |
|
DIN EN ISO 15330-2000 |
紧固件.氢脆性检测的预荷载试验.平行承载表面法 |
(Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999) |
DIN EN ISO 15364-2002 |
船舶和航海技术.载油舱用压力/真空阀 |
(Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001) |
DIN EN ISO 15367-1-2004 |
激光和激光相关设备.激光束波阵面形状的测试方法.第1部分:术语和基础领域 |
(Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003) |
DIN EN ISO 15367-1-2004 |
激光和激光相关设备.激光束波阵面形状的测试方法.第1部分:术语和基础领域 |
|
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|
DIN EN ISO 15463-2005 |
石油和天然气工业.新套管、管和平端钻管的现场检验 |
|
DIN EN ISO 15463-2005 |
石油和天然气工业.新套管、管和平端钻管的现场检验 |
|
DIN EN ISO 15465-2004 |
管道工程.带绕金属软管和软管配件 |
|
DIN EN ISO 15480-2000 |
带攻丝螺纹及六角垫圈螺钉头的自攻螺钉 |
(Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999) |
DIN EN ISO 15481-2000 |
带攻丝螺纹的十字凹槽平头自攻螺钉 |
(Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999) |
DIN EN ISO 15482-2000 |
带攻丝螺纹的十字凹槽沉头自攻螺钉 |
(Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999) |
DIN EN ISO 15483-2000 |
带攻丝螺纹的十字凹槽半沉头自攻螺钉 |
(Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999) |
DIN EN ISO 15487-2002 |
纺织品.评定家庭洗涤和烘干后衣服和其它纺织品外观的方法 |
(Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999); German version EN ISO 15487:2001) |
DIN EN ISO 15496-2004 |
织物.质量控制用织物的水蒸气渗透率测量 |
|
DIN EN ISO 15512-2004 |
塑料.水含量的测定 |
|
DIN EN ISO 15526-1-2004 |
塑料.聚酮模塑和挤塑材料.第1部分:命名系统和基本规范 |
|
DIN EN ISO 15526-2-2004 |
塑料.聚酮模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 15528-2000 |
涂料和清漆用涂料、清漆和原材料.抽样 |
(Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000); German version EN ISO 15528:2000) |
DIN EN ISO 15540-2002 |
船舶和航海技术.软管组件的抗燃性.试验方法 |
(Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001) |
DIN EN ISO 15541-2002 |
船舶和航海技术.软管组件的抗燃性.试验板的要求 |
(Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001) |
DIN EN ISO 15546-2005 |
石油和天然气工业.铝合金钻杆 |
|
DIN EN ISO 15546-2005 |
石油和天然气工业.铝合金钻杆 |
|
DIN EN ISO 15547-2003 |
石油和天然气工业.板式热交换器 |
(Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000); German and English version EN ISO 15547:2001) |
DIN EN ISO 15584-2001 |
小型船舶.船内汽油发动机.发动机燃料和电气件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001); German version EN ISO 15584:2001) |
DIN EN ISO 15586-2004 |
水质.用石墨炉原子吸收光谱法测定痕量素 |
(Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003) |
DIN EN ISO 15586-2004 |
水质.用石墨炉原子吸收光谱法测定痕量素 |
|
DIN EN ISO 15587-1-2002 |
水质.确定水中所选素的发酵作用.第1部分:水解发酵 |
(Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002); German version EN ISO 15587-1:2002) |
DIN EN ISO 15587-2-2002 |
水质.确定水中所选素的发酵作用.第2部分:硝酸发酵作用 |
(Water quality - Digestion for the determination of elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002); German version EN ISO 15587-2:2002) |
DIN EN ISO 1559-2001 |
牙科材料.牙用汞齐合金 |
(Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997); German version EN ISO 1559:2001) |
DIN EN ISO 15605-2004 |
胶粘剂.抽样 |
|
DIN EN ISO 15606-2000 |
牙钻手柄.气动刮器和刮器尖端 |
(Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999); German version EN ISO 15606:1999) |
DIN EN ISO 15607-2004 |
金属材料焊接程序规范和合格鉴定.总则 |
|
DIN EN ISO 15609-1-2005 |
金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊 |
|
DIN EN ISO 15609-2-2001 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001) |
DIN EN ISO 15609-3-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第3部分:电子束焊接 |
|
DIN EN ISO 15609-4-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第4部分:激光束焊接 |
|
DIN EN ISO 15609-5-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第5部分:电阻焊接 |
|
DIN EN ISO 1561-1998 |
牙科嵌入铸蜡嵌体 |
(Dental casting wax (ISO 1561:1995); German version EN ISO 1561:1997) |