标准号 |
中文名称 |
英文名称 |
DIN EN 12331-2004 |
食品加工机械.铰肉机.安全和卫生要求 |
|
DIN EN 12332-1-1998 |
用橡胶和塑料涂层的纺织物.破裂强度测定.第1部分:钢球法 |
(Rubber or plastic coated fabrics - Determination of bursting strength - Part 1: Steel ball method; German version EN 12332-1:1998) |
DIN EN 12332-2-2003 |
橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法 |
(Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002) |
DIN EN 12334-2001 |
工业阀门.铸铁控制阀门 |
(Industrial valves - Cast iron check valves; German version EN 12334:2001) |
DIN EN 12334-2004 |
工业阀门.铸铁止回阀 |
|
DIN EN 12337-1-2000 |
建筑物用玻璃.化学增强钠钙安全玻璃.第1部分:定义和描述 |
(Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; German version EN 12337-1:2000) |
DIN EN 12337-2-2005 |
建筑物用玻璃.化学增强钠钙安全玻璃.第2部分:合格评价/产品标准 |
|
DIN EN 12338-1998 |
水质.汞量测定.用汞齐化浓缩后的方法 |
(Water quality - Determination of mercury - Methods after enrichment by amalgamation; German version EN 12338:1998) |
DIN EN 12339-1997 |
内河航运船舶.绳索套管 |
(Inland navigation vessels - Rope tubs; German version EN 12339:1997) |
DIN EN 123400-1992 |
分规范.挠性无连续连接的印制电路板 |
(Sectional specification: flexible printed boards without through connections; german version EN 123400:1992) |
DIN EN 123400-800-1992 |
用于合格认可的分规范.挠性无连续连接的印制电路板 |
(Capability detail specification: flexible printed boards without through connections; german version EN 123400-800:1992) |
DIN EN 123400/A2-1996 |
分规范:非连续连接的柔性印制电路板 |
(Sectional specification: Flexible printed boards without through connections; German version EN 123400:1992/A2:1995) |
DIN EN 12341-1999 |
空气质量.悬浮尘埃中PM10系数答的测定.测量步骤和参照测量方法的等值验证用参照法和野外检验法 |
(Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods; German version EN 12341:1998) |
DIN EN 12342-1998 |
用于麻醉器和人工呼吸器的呼吸器 |
(Breathing tubes intended for use with anaesthetic apparatus and ventilators; German version EN 12342:1998) |
DIN EN 12345-1999 |
焊接.带图形表示的焊接多语种名称表. |
(Welding - Multilingual terms for welded joints with illustrations; Trilingual version EN 12345:1998) |
DIN EN 12346-1998 |
体操器械.肋木,格子梯,攀登架.安全技术要求和检验方法 |
(Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods; German version EN 12346:1998) |
DIN EN 12347-1998 |
生物技术.蒸气消毒器和高压釜用性能标准 |
(Biotechnology - Performance criteria for steam sterilizers and autoclaves; German version EN 12347:1998) |
DIN EN 12348-2000 |
立式岩心钻机.安全 |
(Core drilling machines on stand - Safety; German version EN 12348:2000) |
DIN EN 1235-1995 |
固体肥料.筛分试验 |
(Solid fertilizers - Test sieving (ISO 8397:1988, modified); German version EN 1235:1995) |
DIN EN 1235-2003 |
固体肥料.筛分试验 |
(Solid fertilizers - Test sieving (ISO 8397:1988, modified) (including Amendment A1:2003); German version EN 1235:1995 + A1:2003) |
DIN EN 12350-1-2000 |
试验用新浇混凝土.第1部分:取样 |
(Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:1999) |
DIN EN 12350-2-2000 |
试验用新浇混凝土.第2部分:蹋落度试验 |
(Testing fresh concrete - Part 2: Slump test; German version EN 12350-2:1999) |
DIN EN 12350-3-2000 |
试验新浇混凝土.第3部分:贝式振动稠度试验;德文版本EN12350-3:1999 |
(Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:1999) |
DIN EN 12350-4-2000 |
试验用新浇混凝土.第4部分:密实度等级 |
(Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:1999) |
DIN EN 12350-5-2000 |
试验用新浇混凝土.第5部分:流动试验台试验 |
(Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:1999) |
DIN EN 12350-6-2000 |
试验用新浇混凝土.第6部分:密度试验 |
(Testing fresh concrete - Part 6: Density; German version EN 12350-6:1999) |
DIN EN 12350-7-2000 |
新浇混凝土试验.第7部分:空气含量.压力法 |
(Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000) |
DIN EN 123500-1992 |
分规范.挠性带连续连接的印制电路板 |
(Sectional specification: flexible printed boards with through connections; german version EN 123500:1992) |
DIN EN 123500-800-1992 |
用于合格认可的分规范.挠性带连续连接的印制电路板 |
(Capability detail specification: flexible printed boards with through connections; german version EN 123500-800:1992) |
DIN EN 123500/A2-1996 |
分规范:连续连接的柔性印制电路板 |
(Sectional specification: Flexible printed boards with through connections; German version EN 123500:1992/A2:1995) |
DIN EN 12351-1999 |
工业阀门.带法兰联接的阀门用护罩.德文标准12351:1999 |
(Industrial valves - Protective caps for valves with flanged connections; German version EN 12351:1999) |
DIN EN 12352-2000 |
交通管制设备.警告和安全灯装置 |
(Traffic control equipment - Warning and safety light devices; German version EN 12352:2000) |
DIN EN 12353-2000 |
化学消毒剂和防腐变剂.杀菌活性测定用微生物株的保存 |
(Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity; German version EN 12353:1999) |
DIN EN 12354-1-2000 |
建筑声学.从件性能评定建筑物的声学性能.第1部分:房间之间对气载声音的隔决 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 1: Airborne sound insulation between rooms; German version EN 12354-1:2000) |
DIN EN 12354-2-2000 |
建筑声学.从件性能评定建筑物的声学性能.第2部分:房间之间对冲击声音的隔决 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; German version EN 12354-2:2000) |
DIN EN 12354-3-2000 |
建筑声学.从件性能评定建筑物的声学性能.第3部分:对室外气载声音的隔决 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; German version EN 12354-3:2000) |
DIN EN 12354-4-2001 |
建筑声学.从件性能评定建筑物的声学性能.第4部分:室内到室外的声音传递 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; German version EN 12354-4:2000) |
DIN EN 12354-6-2004 |
建筑声学.从件性能评估建筑物的声学性能.第6部分:封闭空间的声音吸收 |
|
DIN EN 12355-2003 |
食品加工机械.去皮机和去膜机.安全和卫生要求 |
(Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements; German version EN 12355:2003) |
DIN EN 1236-1995 |
肥料.容积(松)密度的测定 |
(Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995) |
DIN EN 123600-1997 |
分规范.带贯通连接的弯曲刚性多层印制电路板 |
(Sectional specification - Flex-rigid multilayer printed boards with through connections; German version EN 123600:1996) |
DIN EN 12368-2000 |
交通控制设备.信号器 |
(Traffic control equipment - Signal heads; German version EN 12368:2000) |
DIN EN 12369-1-2001 |
木板.结构设计用特征值.第1部分:OSB.碎料板和纤维板 |
(Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001) |
DIN EN 12369-2-2004 |
木板.结构设计用特征值.第2部分:胶合板 |
|
DIN EN 1237-1995 |
肥料.容积(轻拍)密度测定 |
(Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995) |
DIN EN 12370-1999 |
天然石料的检验方法.抗盐结晶性能的测定 |
(Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:1999) |
DIN EN 123700-1997 |
分规范.带贯通连接的弯曲刚性双面印制电路板 |
(Sectional specification - Flex-rigid double sided printed boards with through connections; German version EN 123700:1996) |
DIN EN 12371-2002 |
天然石料试验方法.抗冻性 |
(Natural stone test methods - Determination of frost resistance; German version EN 12371:2001) |
DIN EN 12372 Berichtigung 1-2003 |
DINEN12372-1999的勘误 |
(Corrigenda to DIN EN 12372:1999-06 (EN 12372:1999/AC:2002)) |
DIN EN 12372-1999 |
天然石料的检验方法.集中负荷下抗弯强度的测定 |
(Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999) |
DIN EN 12373-1-2001 |
铝及铝合金.阳极氧化.第1部分:铝上装饰和保护用阳极氧化覆层的规定方法 |
(Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; German version EN 12373-1:2001) |
DIN EN 12373-10-1999 |
铝和铝合金.阳极处理.第10部分:用磨料喷射试验仪进行耐蘑试验测量阳极产生的氧化层的平均特殊耐磨性 |
(Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998) |
DIN EN 12373-11-2000 |
铝及铝合金.阳极处理.第11部分:20、45、60或85角阳极氧化镀层的镜面反射系数和镜面光泽度测量 |
(Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85? German version EN 12373-11:2000) |
DIN EN 12373-12-2000 |
铝及铝合金.阳极处理.第12部分:使用积算球仪器测量铝表面的反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000) |
DIN EN 12373-13-2000 |
铝及铝合金.阳极处理.第13部分:使用测角光度计或滤光测角光度计测量铝表面的反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 13: Measurement for reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; German version EN 12373-13:2000) |
DIN EN 12373-14-2000 |
铝及铝合金.阳极处理.第14部分:阳极氧化覆层图像清晰度的目视识别.图表比例尺法 |
(Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings; Chart scale method; German version EN 12373-14:2000) |
DIN EN 12373-15-2000 |
铝及铝合金.阳极处理.第15部分:阳极氧化覆层耐变形裂开的评定 |
(Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; German version EN 12373-15:2000) |
DIN EN 12373-16-2001 |
铝及铝合金.阳极氧化.第16部分:阳极氧化薄覆层连续性检查.硫酸铜试验 |
(Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; German version EN 12373-16:2001) |
DIN EN 12373-17-2001 |
铝及铝合金.阳极氧化.第17部分:电介质击穿潜能的测定 |
(Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; German version EN 12373-17:2001) |
DIN EN 12373-18-2001 |
铝及铝合金.阳极氧化.第18部分:斑蚀评定的等级系统.图表法 |
(Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; German version EN 12373-18:2001) |
DIN EN 12373-19-2001 |
铝及铝合金.阳极氧化.第19部分:斑蚀评定的等级系统.格栅法 |
(Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; German version EN 12373-19:2001) |
DIN EN 12373-2-1999 |
铝和铝合金.阳极处理.第2部分:阳极处理产生的氧化层中单位面积质量(与面积相关的质量)的测定.重力法 |
(Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998) |
DIN EN 12373-3-1999 |
铝和铝合金.阳极处理.第3部分:阳极处理产生的氧化层厚度的测定.用光截面显微镜作无损测量 |
(Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998) |
DIN EN 12373-4-1999 |
铝和铝合金.阳极处理.第4部分:通过用预先酸处理的着色滴落试验密封后进行阳极处理产生的氧化层的可着色性的 |
(Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998) |
DIN EN 12373-5-1999 |
铝和铝合金.阳极处理.第5部分:通过测定视在导纳检验密封的阳极处理产生的氧化层的质量 |
(Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998) |
DIN EN 12373-6-1999 |
铝和铝合金.阳极处理.第6部分:在预先没有进行酸处理的铬磷酸溶液中浸渍以后通过测定质量损耗检验密封的阳极 |
(Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 123 |
DIN EN 12373-7-2002 |
铝及铝合金.阳极氧化.第7部分:通过磷酸和铬酸溶液浸渍酸处理后测量质量损失评定密封阳极氧化覆层的质量 |
(Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373- |
DIN EN 12373-8-1999 |
铝和铝合金.阳极处理.第8部分:着色的阳极氧化处理产生的氧化层耐紫外线性能的比较测定 |
(Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998) |
DIN EN 12373-9-1999 |
铝和铝合金.阳极处理.第9部分:通过用砂轮试验仪的磨损检验测量阳极处理产生的氧化层的抗磨损性和磨损数 |
(Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998) |
DIN EN 12374-1998 |
包装材料.管.专业术语 |
(Packaging - Flexible tubes - Terminology; German version EN 12374:1998) |
DIN EN 12375-1998 |
包装材料.铝软管.管壁厚的测定 |
(Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998) |
DIN EN 12376-1999 |
实验室诊断医疗设备.生物着色用实验室诊断试剂生产厂商提供的信息 |
(In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology; German version EN 12376:1999) |
DIN EN 12377-1998 |
包装材料.管道.闭锁气密性测定用检验方法 |
(Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998) |
DIN EN 1238-1999 |
胶粘剂.热塑胶粘剂(圆型和球型)软化点的测定 |
(Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:1999) |
DIN EN 12380-2003 |
排水系统用通气阀.要求、试验方法和合格评定 |
(Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity; German version EN 12380:2002) |
DIN EN 123800-1997 |
分规范.带贯通连接的挠性多层印制电路板 |
(Sectional specification - Flexible multilayer printed boards with through connection; German version EN 123800:1996) |
DIN EN 12384-1999 |
铜和铜合金.带材弹簧弯曲极限的测定 |
(Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999) |
DIN EN 12385-1-2003 |
钢丝绳.安全性.第1部分:一般要求 |
(Steel wire ropes - Safety - Part 1: General requirements; German version EN 12385-1:2002) |
DIN EN 12385-10-2004 |
钢丝绳.安全.第10部分:一般结构用的螺旋绳 |
|
DIN EN 12385-2-2003 |
钢丝绳.安全.第2部分:定义、命名和分类 |
(Steel wire ropes - Safety - Part 2: Definitions, designation and classification; German version EN 12385-2:2002) |
DIN EN 12385-3-2004 |
钢丝绳.安全.第3部分:使用和维护的信息 |
|
DIN EN 12385-4-2003 |
钢丝绳.安全.第4部分:一般提升装置用股绞绳 |
(Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications; German version EN 12385-4:2002) |
DIN EN 12385-6-2004 |
钢丝绳.安全性.第6部分:矿井用标准绳 |
|
DIN EN 12385-7-2003 |
钢丝绳.安全.第7部分:矿井用锁丝钢丝绳 |
(Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts; German version EN 12385-7:2002) |
DIN EN 12385-8-2003 |
钢丝绳.安全.第8部分:升降机用股绞绳 |
(Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons; German version EN 12385-8:2002) |
DIN EN 12385-9-2003 |
钢丝绳.安全.第9部分:为载人设计用索道设备的锁环钢丝绳 |
(Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons; German version EN 12385-9:2002) |
DIN EN 12386-1999 |
饮用水制备用化合物.硫酸铜 |
(Chemicals used for treatment of water intended for human consumption - Copper sulfate; German version EN 12386:1998) |
DIN EN 12386-2005 |
人类生活用水处理用化学品.硫酸铜 |
|
DIN EN 1239-1998 |
胶粘剂.冻熔稳定性 |
(Adhesives - Freeze-thaw stability; German version EN 1239:1998) |
DIN EN 12390-1-2001 |
硬化混凝土试验.第1部分:样品和模型的形状、尺寸和其他要求 |
(Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000) |
DIN EN 12390-2-2001 |
硬化混凝土试验.第2部分:强度试验用的试样的形成和处理 |
(Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000) |
DIN EN 12390-3-2002 |
硬化混凝土试验.第3部分:试样的压缩强度 |
(Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001) |
DIN EN 12390-4-2000 |
硬化混凝土试验.第4部分:压缩强度.试验机规范 |
(Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000) |
DIN EN 12390-5-2001 |
硬化混凝土试验.第5部分:试样的结构强度 |
(Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000) |
DIN EN 12390-6-2001 |
硬化混凝土试验.第6部分:试样的劈裂拉伸强度 |
(Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000) |
DIN EN 12390-7-2001 |
硬化混凝土试验.第7部分:硬化混凝土的密度 |
(Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000) |
DIN EN 12390-8-2001 |
硬化混凝土试验.第8部分:加压条件下水的渗透深度 |
(Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000) |
DIN EN 12391-1-2004 |
烟囱.金属烟囱用执行标准.第1部分:非室内密封的加热设备用烟囱 |
|
DIN EN 12392-2000 |
铝和铝合金.锻造产品.用于压力设备生产的产品的特殊要求 |
(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000) |
DIN EN 12393-1-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第1部分:概述 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations; German version EN 12393-1:1998) |
DIN EN 12393-2-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第2部分:萃取和净化的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and clean-up; German version EN 12393-2:1998) |
DIN EN 12393-3-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第2部分:测定和保障的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests; Version allemande EN 12393-3:1998) |
DIN EN 12396-1-1998 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残流物的测定.第1部分:分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method; German version EN 12396-1:1998) |
DIN EN 12396-2-1998 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残流物的测定.第2部分:色相气谱法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method; German version EN 12396-2:1998) |
DIN EN 12396-3-2000 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残留物的测定.第3部分:紫外分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000) |
DIN EN 12397-2005 |
载人用索道装置的安全要求.操作 |
|
DIN EN 124-1994 |
排水设备的排水沟盖和人孔盖.结构原理.检验.标志.质量监督 |
(Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; German version EN 124:1994) |
DIN EN 1240-1998 |
胶粘剂.羟基值和/或羟基含量的测定 |
(Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:1998) |
DIN EN 12400-2003 |
窗户和人行门.机械耐久性.要求和分类 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification; German version EN 12400:2002) |
DIN EN 12402-1999 |
铅和铅合金.分析取样方法 |
(Lead and lead alloys - Methods of sampling for analysis; German version EN 12402:1999) |
DIN EN 12403-1998 |
条码.结构数据组 |
(Bar coding - Structured data files; German version EN 12403:1998) |
DIN EN 12406-1999 |
交换容器.C级热交换容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class C - Dimensions and general requirements; German version EN 12406:1999) |
DIN EN 12407-2000 |
天然石料试验方法.岩石检验 |
(Natural stone test methods - Petrographic examination; German version EN 12407:2000) |
DIN EN 12408-2005 |
载人员用索道装置的安全要求.质量控制 |
|
DIN EN 12409-1999 |
橡胶和塑料机械.热成形机械.安全要求 |
(Rubber and plastics machines - Thermoforming machines - Safety requirements; German version EN 12409:1999) |
DIN EN 1241-1998 |
胶粘剂.酸值测定 |
(Adhesives - Determination of acid value; German version EN 1241:1998) |
DIN EN 12410-1999 |
交换容器.A级热交换容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class A - Dimensions and general requirements; German version EN 12410:1999) |
DIN EN 12413-1999 |
化合磨料制磨具的安全性要求 |
(Safety requirements for bonded abrasive products; German version EN 12413:1999) |
DIN EN 12414-2000 |
车辆停车控制设备.付款和售票机 |
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements; German version EN 12414:1999) |
DIN EN 12415-2003 |
机床的安全.小型数控车床和车床顶尖 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres (includes Amendment A1:2002); German version EN 12415:2000 + A1:2002) |