标准号 |
中文名称 |
英文名称 |
| BS EN ISO 14660-2-2000 |
产品几何量技术规范(GPS).几何特性.圆柱体和圆锥体中心线的确定、表面中心的确定、确定位置尺寸的要求 |
(Geometrical Product Specifications (GPS) - Geometrical features - Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature) |
| BS EN ISO 14673-1-2001 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.镉还原和光谱法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using cadmium reduction and spectrometry) |
| BS EN ISO 14673-1-2004 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.镉还原和光谱测定法 |
|
| BS EN ISO 14673-2-2001 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.分段流动分析法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using segmented flow analysis (Routine method)) |
| BS EN ISO 14673-2-2004 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.分段流动分析法(常规法) |
|
| BS EN ISO 14673-3-2001 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.采用镉还原和整齐渗析的流动注入分析的方法(常规法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method)) |
| BS EN ISO 14673-3-2004 |
奶和奶制品.硝酸盐和亚硝酸盐含量的测定.镉还原和直接渗析流动注入分析法(常规法) |
|
| BS EN ISO 14675-2003 |
牛奶和牛奶制品.竞争酵素免疫分析的标准化描述指南.黄曲霉毒素M$D1含量的测定 |
(Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M$D1 content) |
| BS EN ISO 14678-2005 |
胶粘剂.耐流动性测定(凹陷) |
|
| BS EN ISO 14683-1999 |
建筑结构中的热桥.线性热传输.简化的方法和有缺陷阀门 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values) |
| BS EN ISO 14688-1-2002 |
土工技术研究和试验.土壤的识别和分类.识别和描述 |
(Geotechnical investigation and testing - Identification and classification of soil - Identification and description) |
| BS EN ISO 14689-1-2004 |
土工调查和检验.岩石的识别与分类.识别与描述 |
|
| BS EN ISO 14691-2000 |
石油和天然气工业.机械动力传输的柔性耦合.一般用途 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications) |
| BS EN ISO 14692-1-2003 |
石油和天然气工业.玻璃增强塑料(GRP)管道.词汇、符号、应用和材料 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials) |
| BS EN ISO 14692-2-2003 |
石油和天然气工业.玻璃增强塑料(GRP)管道.合格评定和生产 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture |
| BS EN ISO 14692-3-2003 |
石油和天然气工业.玻璃增强塑料(GRP)管道.系统设计 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design) |
| BS EN ISO 14692-4-2003 |
石油和天然气工业.玻璃增强塑料(GRP)管道.制造、安装和运行 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation) |
| BS EN ISO 14693-2004 |
石油和天然气工业.钻井和油井辅助设备 |
|
| BS EN ISO 14698-1-2003 |
无菌室及相关控制环境.生物污染控制.一般原则和方法 |
(Cleanrooms and associated controlled environments - Biocontamination control - General principles and methods) |
| BS EN ISO 14698-2-2003 |
洁净室和相关控制环境.生物污染控制.生物污染数据的评价和说明 |
(Cleanrooms and associated controlled environments - Biocontamination control - Evaluation and interpretation of biocontamination data) |
| BS EN ISO 14713-1999 |
铁和钢结构的防腐.锌和铝涂层.指南 |
(Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines) |
| BS EN ISO 14723-2002 |
石油和天然气工业.管道输送系统.海下管道阀门 |
(Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves) |
| BS EN ISO 14726-1-2000 |
船舶和航海技术.管道系统容量的识别颜色.主颜色和介质 |
(Ships and marine technology - Identification colours for the content of piping systems - Main colours and media) |
| BS EN ISO 14727-1999 |
牙科植入物.与牙科植入物上部构造相连接的预制部件.技术文件内容 |
(Dental implants - Prefabricated parts connecting suprastructures to dental implants - Contents of technical file) |
| BS EN ISO 14729-2001 |
眼科光学.接触镜片护理产品.产品的微生物要求和试验方法以及接触镜片卫生管理制度 |
(Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses) |
| BS EN ISO 14730-2000 |
眼科光学.接触镜片护理产品.抗菌防腐剂效果试验和作废日期测定指南 |
(Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date) |
| BS EN ISO 14738-2002 |
机械安全.机械工作站设计对人体测量的要求 |
(Safety of machinery - Anthropometric requirements for the design of workstations at machinery) |
| BS EN ISO 14744-1-2001 |
焊接.电子束焊接机的验收检验.原理和验收条件 |
(Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions) |
| BS EN ISO 14744-2-2001 |
焊接.电子束焊接机的验收检验.加速电压特性测量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics) |
| BS EN ISO 14744-3-2001 |
焊接.电子束焊接机的验收检验.束电流特性测量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics) |
| BS EN ISO 14744-4-2001 |
焊接.电子束焊接机的验收检验.焊接速度的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed) |
| BS EN ISO 14744-5-2001 |
焊接.电子束焊接机的验收检验.使用准确度的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy) |
| BS EN ISO 14744-6-2001 |
焊接.电子束焊接机的验收检验.电焊位置稳定性的测量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position) |
| BS EN ISO 1478-2000 |
自攻螺纹螺钉 |
(Tapping screw thread) |
| BS EN ISO 1479-1995 |
六角头自攻螺钉规范 |
(Specification for hexagon-head tapping screws) |
| BS EN ISO 14801-2003 |
牙科学.牙科植入物的疲劳试验 |
(Dentistry - Fatigue test for endosseous dental implants) |
| BS EN ISO 1481-1995 |
开槽平头丝锥螺钉规范 |
(Specification for slotted pan-head tapping screws) |
| BS EN ISO 14819-1-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI电文.无线电数据系统的编码协议.利用ALERT-C的交通电文信道(RDS |
(Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C) |
| BS EN ISO 14819-2-2003 |
交通和旅客信息(TTI).经过交通电文编码的TTI电文.无线电数据系统用事件和信息代码.交通电文信道(RDS-TMC) |
(Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC)) |
| BS EN ISO 14819-3-2004 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.ALERT-C的位置参考 |
|
| BS EN ISO 14819-3-2004 |
交通和旅客信息(TTI).经过交通电文编码的TTI信息.ALERT-C的定位 |
|
| BS EN ISO 1482-1995 |
开槽埋头丝锥螺钉规范(普通型) |
(Specification for slotted countersunk (flat) head tapping screws (common head style)) |
| BS EN ISO 14825-2004 |
智能运输系统.地理数据文档(GDF).总体数据规范 |
|
| BS EN ISO 1483-1995 |
开槽埋头丝锥螺钉(普通型) |
(Slotted raised countersunk (oval) head tapping screws (common head style)) |
| BS EN ISO 14847-1999 |
转式变容真空泵.技术要求 |
(Rotary positive displacement pumps - Technical requirements) |
| BS EN ISO 14877-2002 |
小颗粒研磨产生摩擦引爆操作工用防护服 |
(Protective clothing for abrasive blasting operations using granular abrasives) |
| BS EN ISO 14880-1-2005 |
显微透镜系列.词汇 |
|
| BS EN ISO 14881-2005 |
集成光学.接口.有关耦合特性的参数 |
|
| BS EN ISO 14889-2003 |
眼科光学.眼镜镜片.未切精加工眼镜片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses) |
| BS EN ISO 14890-2003 |
输送带.通用织物结构的橡胶或塑料包覆的输送带规范 |
(Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use) |
| BS EN ISO 14891-2002 |
牛奶和奶制品.测定氮含量.根据 Dumas原理使用常规燃烧法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle) |
| BS EN ISO 14895-2003 |
小艇.液体燃料厨灶 |
(Small craft - Liquid-fuelled galley stoves) |
| BS EN ISO 14896-2001 |
塑料.聚氨酯原材料.异氰酸酯的含量测定 |
(Plastics - Polyurethane raw materials - Determination of isocyanate content) |
| BS EN ISO 14902-2001 |
动物饲料.大豆制品胰蛋白酶抑制剂活性的测定 |
(Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products) |
| BS EN ISO 14906-2004 |
道路运输和交通信息技术.电子自动收费系统.短程通信的应用接口定义 |
|
| BS EN ISO 14911-1999 |
水质.用离子色谱法测定溶解的Li |
(Water quality - Determination of dissolved Li) |
| BS EN ISO 14915-1-2002 |
多媒体用户接口的软件人类工效学.设计原理和框架 |
(Software ergonomics for multimedia user interfaces - Design principles and framework) |
| BS EN ISO 14915-2-2003 |
多媒体用户接口用软件人类工效学.多媒体导航和控制 |
(Software ergonomics for multimedia user interfaces - Multimedia navigation and control) |
| BS EN ISO 14915-3-2002 |
多媒体用户接口用软件人类工效学.媒介选择和结合 |
(Software ergonomics for multimedia user interfaces - Media selection and combination) |
| BS EN ISO 14918-1998 |
热喷涂.热喷涂器的验收试验 |
(Thermal spraying - Approval testing of thermal sprayers) |
| BS EN ISO 14919-2001 |
热喷涂.熔喷和电弧喷涂用线材、杆材和软线.分类.技术支持条件 |
(Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions) |
| BS EN ISO 14920-1999 |
热喷镀.自熔化合金的熔化和喷镀 |
(Thermal spraying - Spraying and fusing of self-fluxing alloys) |
| BS EN ISO 14921-2001 |
热喷涂.工程件的热喷涂应用过程 |
(Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components) |
| BS EN ISO 14922-1-1999 |
热喷镀.热喷镀结构的质量要求.选择和使用导则 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use) |
| BS EN ISO 14922-2-1999 |
热喷镀.热喷镀结构的质量要求.综合质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements) |
| BS EN ISO 14922-3-1999 |
热喷镀.热喷镀结构的质量要求.标准质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements) |
| BS EN ISO 14922-4-1999 |
热喷镀.热喷镀结构的质量要求.基本质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements) |
| BS EN ISO 14923-2003 |
热喷镀.热喷镀层的特征和检验 |
(Thermal spraying - Characterization and testing of thermally sprayed coatings) |
| BS EN ISO 14924-2005 |
热喷涂.热喷涂覆层的后处理和精加工 |
|
| BS EN ISO 14931-2004 |
皮革.制衣用皮革的选择指南(毛皮除外) |
|
| BS EN ISO 14935-1999 |
石油及其相关产品.耐火流体的吸油绳燃烧持久性测定 |
(Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids) |
| BS EN ISO 14937-2001 |
保健产品的消毒.医疗设备消毒过程的制定、批准和常规控制一般要求 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devi) |
| BS EN ISO 14939-2001 |
动物饲料.用高效液相色谱法测定卡巴氧的含量 |
(Animal feeding stuffs - Determination of carbadox content - Method using high performance liquid chromatography) |
| BS EN ISO 14945-2004 |
小艇.制造者铭牌 |
|
| BS EN ISO 14946-2001 |
小型船舶.最大荷载能力 |
(Small craft - Maximum load capacity) |
| BS EN ISO 14956-2002 |
空气质量.用测量不确定度比较法评估测量程序适应性 |
(Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty) |
| BS EN ISO 14971-2001 |
医疗器械.医疗器械风险管理的应用 |
(Medical devices - Application of risk management to medical devices) |
| BS EN ISO 14982-1998 |
农业和林业机械.电磁兼容性.试验方法和验收标准 |
(Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria) |
| BS EN ISO 15004-1998 |
眼科设备.基本要求和试验方法 |
(Ophthalmic instruments - Fundamental requirements and test methods) |
| BS EN ISO 15005-2002 |
道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures) |
| BS EN ISO 15006-2004 |
道路车辆.交通信息和控制系统的人类工程学方面.车内声音信号表示规范和声顺性规程 |
|
| BS EN ISO 15007-1-2002 |
道路车辆.与运输信息和控制系统有关的司机目视行为的测量.定义和参数 |
(Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters) |
| BS EN ISO 15008-2003 |
道路车辆.运输信息和控制系统的人类工效学.车内可视显示规范和一致性规程 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation) |
| BS EN ISO 15011-1-2002 |
焊接和有关过程中的健康和安全.电弧焊接产生的烟尘和气体的实验室取样方法.排放率测定和颗粒烟尘分析的取样 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of emission rate and sampling for analysis of particulate fum) |
| BS EN ISO 15011-2-2003 |
焊接和相关工艺的卫生和安全.电弧焊产生的烟和气体取样的实验室法.除臭氧外的气体排放率的测定 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of emission rates of gases, except ozone) |
| BS EN ISO 15011-3-2002 |
焊接和相关工艺的卫生和安全.电弧焊产生的烟和气体取样的实验室法.用固定点测量法测定臭氧浓度 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of ozone concentration using fixed point measurements) |
| BS EN ISO 15012-1-2005 |
焊接和相关工艺中的健康和安全.空气过滤用设备的试验和标记要求.焊接烟尘分离效率的试验 |
|
| BS EN ISO 15013-1999 |
聚丙烯挤压片材(PP).要求和试验方法 |
(Extruded sheets of polypropylene (PP) - Requirements and test methods) |
| BS EN ISO 15025-2002 |
防护服.防热和火.限制火焰蔓延的试验方法 |
(Protective clothing - Protection against heat and flame - Method of test for limited flame spread) |
| BS EN ISO 15027-1-2002 |
浸渍服装.耐磨服装,包括安全的要求 |
(Immersion suits - Constant wear suits, requirements including safety) |
| BS EN ISO 15027-2-2002 |
浸渍服装.废弃的服装,包括安全的要求 |
(Immersion suits - Abandonment suits, requirements including safety) |
| BS EN ISO 15027-3-2002 |
浸渍服装的试验方法 |
(Immersion suits - Test methods) |
| BS EN ISO 15029-1-2000 |
石油和相关产品.耐火液体喷射点燃特性的测定.喷射火焰持久性.空心锥形喷嘴法 |
(Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method) |
| BS EN ISO 15061-2001 |
水质.不溶溴酸盐含量的测定.离子液相色谱法 |
(Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions) |
| BS EN ISO 15065-2005 |
头部外形符合ISO 7721标准的沉头螺钉的埋头孔 |
|
| BS EN ISO 15083-2003 |
小艇.舱底污水抽吸系统 |
(Small craft - Bilge-pumping systems) |
| BS EN ISO 15084-2003 |
小艇.投锚、停泊和牵引.靠船墩 |
(Small craft - Anchoring, mooring and towing - Strong points) |
| BS EN ISO 15085-2003 |
小艇.人员落水的预防和救护 |
(Small craft - Man-overboard prevention and recovery) |
| BS EN ISO 15087-1-2001 |
牙科起子.一般要求 |
(Dental elevators - General requirements) |
| BS EN ISO 15087-2-2000 |
牙科起子.沃里克吉姆斯起子 |
(Dental elevators - Warwick James elevators) |
| BS EN ISO 15087-3-2000 |
牙科起子.CRYER起子 |
(Dental elevators - Cryer elevators) |
| BS EN ISO 15087-4-2000 |
牙科起子.COUPLAND起子 |
(Dental elevators - Coupland elevators) |
| BS EN ISO 15087-5-2000 |
牙科起子.BEIN起子 |
(Dental elevators - Bein elevators) |
| BS EN ISO 15087-6-2000 |
牙科起子.FLOHR起子 |
(Dental elevators - Flohr elevators) |
| BS EN ISO 15098-1-2001 |
牙科镊子.一般要求 |
(Dental tweezers - General requirements) |
| BS EN ISO 15098-2-2000 |
牙科钳子.Meriam型 |
(Dental tweezers - Meriam types) |
| BS EN ISO 15098-3-2000 |
牙科钳子.学院型 |
(Dental tweezers - College types) |
| BS EN ISO 15103-1-2004 |
塑料.聚乙烯聚酯模塑和挤制材料.命名系统和基本规范 |
|
| BS EN ISO 15103-2-2004 |
塑料.聚苯撑醚(PPE)模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 15103-2-2004 |
塑料.聚苯撑醚(PPE)模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.湿度探测传感器法 |
|
| BS EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.红外探测传感器法 |
|
| BS EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.电解探测传感器法 |
|
| BS EN ISO 1513-1993 |
色漆和清漆.试验样品的检验和制备 |
(Paints and varnishes - Examination and preparation of samples for testing) |
| BS EN ISO 15136-1-2001 |
石油和天然气工业的钻孔设备.人工升降梯的空腔泵系统.泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps) |
| BS EN ISO 15138-2001 |
石油和天然气工业.海上生产设备.加热、通风和空调设备 |
(Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning) |
| BS EN ISO 1514-1997 |
涂料和清漆.试验标准板条 |
(Paints and varnishes - Standard panels for testing) |
| BS EN ISO 15141-1-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.硅胶净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - High performance liquid chromatographic method with silica gel clean up) |
| BS EN ISO 15141-2-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.重碳酸盐净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - High performance liquid chromatographic method with bicarbonate clean up) |
| BS EN ISO 15147-1999 |
轻传输带.切割轻传输带的宽度和长度公差 |
(Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com