标准号 |
中文名称 |
英文名称 |
prEN 2006-1975 |
航空航天工业用橡胶 试验方法 |
Rubber for aerospace use; test methods |
prEN 2010-1975 |
航空航天系列 飞行器结构轴承 用镀镉和钝化轴承钢制造的刚性单列扭力管球轴承 尺寸和荷载 |
Airframe bearings; rigid single row torque tube ball bearings in cadmium plated and passivated bearing steel; dimensions and loads; aerospace series |
prEN 2013-1975 |
航天航空系列 飞行器结构轴承 用镀镉和钝化轴承钢制造的刚性单列球轴承 尺寸和荷载 |
Airframe bearings; rigid single row ball bearings in cadmium plated and passivated bearing steel; dimensions and loads; aerospace series |
prEN 2016-1975 |
航空航天系列 飞行器结构轴承 用镀镉和钝化轴承钢制的自位双列球轴承 尺寸和荷载 |
Airframe bearings; double row self aligning ball bearings in cadmium plated and passivated bearing steel; dimensions and loads; aerospace series |
prEN 2019-1975 |
航空航天系列 飞行器结构轴承 用镀镉和钝化轴承钢制造的自位 单列滚动轴承 尺寸和荷载 |
Airframe bearings; single row self aligning roller bearings in cadmium plated and passivated bearing steel; dimensions and loads; aerospace series |
prEN 2028-1976 |
航空航天系列 耐腐蚀钢开口销 |
Split pins in corrosion resistant steel; aerospace series |
prEN 203-1-2002 |
气体加热供膳设备 第1部分:安全要求 |
Gas heated catering equipment - Part 1: safety requirements |
prEN 203-3-1996 |
气体加热供膳设备 第3部分:适应性目的 |
Gas-heated catering equipment - Part 3: Fitness for purpose |
prEN 2031-1981 |
航空航天系列 调质钢FE-PL31 型钢 |
Aerospace series; steel FE-PL 31; hardened and tempered; bars |
prEN 2034-1977 |
航空航天系列 拉制或清理后的圆型钢 尺寸 容差h11 |
Round steel bars, drawn and/or descaled; dimensions; tolerances h 11; aerospace series |
prEN 2035-1977 |
航空航天系列 拉制圆型钢 容差h9 |
Round steel bars, drawn; dimensions; tolerance h 9; Aerospace series |
prEN 2036-1977 |
航空航天系列 磨削过的圆型钢 尺寸 容差h8 |
Round steel bars, ground; dimensions; tolerance h 8; aerospace series |
prEN 2037-1977 |
航空航天系列 拉制六角型钢 尺寸 容差h11和h12 |
Hexagonal steel bars, drawn; dimensions; tolerances h 11 and h 12; aerospace series |
prEN 2038-1977 |
航空航天系列 拉制六角型钢 尺寸 容差h9 |
Hexagonal steel bars, drawn; dimensions; tolerance h 9; aerospace series |
prEN 2039-1977 |
航空航天系列 拉制矩形型钢 尺寸 容差h11和h12 |
Rectangular steel bars, drawn; dimensions; tolerances h 11 and h 12; aerospace series |
prEN 2040-1977 |
航空航天系列 轧制矩形型钢 尺寸 容差js16 |
Rectangular steel bars, rolled; dimensions; tolerance js 16; aerospace series |
prEN 2041-1977 |
航空航天系列 拉制方形型钢 尺寸 容差h11和h12 |
Square steel bars, drawn; dimensions; tolerances h 11 and h 12; aerospace series |
prEN 2042-1977 |
航空航天系列 轧制方形型钢 尺寸 容差js16 |
Square steel bars, rolled; dimensions; tolerance js 16; aerospace series |
prEN 2043-1996 |
航空航天系列 金属材料 对半成品质量鉴定(锻造和铸造件除外)的一般要求 |
Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings) |
prEN 2051-1977 |
航空航天系列 L型材 铝合金褶皱截面 尺寸 |
L-section; aluminium alloy folded profiles; dimensions; aerospace series |
prEN 2052-1977 |
航空航天系列 L型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 |
L-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
prEN 2053-1977 |
航空航天系列 U型材 铝合金褶皱截面 尺寸 |
U-section; aluminium alloy folded profiles; dimensions; aerospace series |
prEN 2054-1977 |
航空航天系列 U型材 具有外唇状凸缘的铝合金褶皱截面 尺寸 |
U-section; aluminium alloy folded profiles with externally lipped flanges; dimensions; aerospace series |
prEN 2055-1977 |
航空航天系列 U型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 |
U-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
prEN 2056-1977 |
航空航天系列 Z型材 铝合金褶皱截面 尺寸 |
Z-section; aluminium alloy folded profiles; dimensions; aerospace series |
prEN 2057-1977 |
航空航天系列 Z型材 具有一个唇状凸缘的铝合金褶皱截面 尺寸 |
Z-section; aluminium alloy folded profiles with one lipped flange; dimensions; aerospace series |
prEN 2059-1977 |
航空航天系列 TOP hat型材 铝合金褶皱截面 尺寸 |
Top hat section; aluminium alloy folded profiles; dimensions; aerospace series |
prEN 2060-1977 |
航空航天系列 Bowler hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 |
Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series |
prEN 2061-1977 |
航空航天系列 TOP hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 |
Top hat section; aluminium alloy folded profiles with lipped flanges; dimensions; aerospace series |
prEN 2080-1978 |
航空航天系列 用于飞行器的软钢丝绳 耐腐蚀钢制操纵装置、 结构、尺寸、荷载 |
Flexible wire ropes for aircraft; controls in corrosion resisting steel; construction, dimensions, loads; aerospace series |
prEN 2081-1978 |
航空航天系列 用于控制钢缆的带球轴承的非金属干性滑轮组 尺寸和荷载 |
Non-metallic bodied pulleys with ball bearing for control cables; dimensions and loads; aerospace series |
prEN 2084-2000 |
航空航天系列 铜和铜合金导体的一般用途的单芯电缆 技术规范 |
Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification |
prEN 2086-1998 |
标准号: |
中文标题: |
prEN 2091-1976 |
航空航天系列 铝合金AL-P13P1-T4 包层薄板和带材 |
Aluminium alloy AL-P13 PI-T4; clad sheets and strips; aerospace series |
prEN 2098-1-1981 |
航天工业系列 钛及耐热合金锻制产品的检验和试验要求 第1部分:一般要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 1: general requirements |
prEN 2098-2-1981 |
航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第2部分:薄板、和板材带材的检验和试验要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 2: inspection and testing requirements for sheets, strips and plates |
prEN 2098-3-1981 |
航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第3部分:棒材及型材的检验和试验要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 3: inspection and testing requirements for bars and sections |
prEN 2098-4-1981 |
航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第4部分:管材的检验和试验要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 4: inspection and testing requirements for tubes |
prEN 2098-5-1981 |
航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第5部分:线材的检验和试验要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 5: inspection and testing requirements for wires |
prEN 2098-6-1981 |
航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第6部分:棒材和线材紧固件的检验和试验要求 |
Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 6: inspection and testing requirements for bars and wires fasteners |
prEN 2123-1999 |
航空航天系列 铝合金AL-P2618-T851 板材 6mm≤a≤140mm |
Aerospace series - Aluminium alloy AL-P2618A-T851 - Plate, 6 mm ≤ a ≤ 140 mm |
prEN 2124-1999 |
航空航天系列 铝合金AL-P2214-T651 板材 6mm≤a≤140mm |
Aerospace series - Aluminium alloy AL-P2214-T651 - Plate, 6 mm ≤ a ≤ 140 mm |
prEN 2129-1978 |
航空航天系列 用于操纵索滑轮的球轴承 尺寸和负荷 |
Ball bearings for control cable pulleys; dimensions and loads; aerospace series |
prEN 2143-1998 |
航空航天系列 1050A型铝制的万能分度头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series |
prEN 2146-1998 |
航空航天系列 2017A型铝制的万能分度头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium 2017A, inch based series |
prEN 2148-1998 |
航空航天系列 5056A型铝制的万能头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium 5056A, inch based series |
prEN 215-2-1986 |
恒温散热阀 第2部分:连接尺寸和细节 |
Thermostatic radiator valves; part 2: dimensions and details on connection |
prEN 2155-15-1981 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第16部分:热稳定性的测定 |
Aerospace series; test methods for transparent materials for aircraft glazing; part 15: determination of thermal stability |
prEN 2155-20-2000 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第20部分:铸造状态聚丙烯酸裂纹后强度保持力的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 20: Determination of retention of strength after crazing for as-cast acrylics |
prEN 2155-22-2000 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第22部分:延展的丙烯酸薄片热驰豫的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 22: Determination of thermal relaxation of stretched acrylic sheet |
prEN 2155-4-2000 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第4部分:超过280nm至360nm平行波长的紫外线光传输范围的 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 4: Determination of ultraviolet light transmission over the wavelength range 280 nm to 360 nm |
prEN 2155-6-2000 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第6部分:可缺陷的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 6: Determination of optical defects |
prEN 2158-2-1979 |
航空航天系列 MJ螺纹 第2部分:标称直径的选择 螺距 公差 |
MJ threads; part 2: selection of nominal diameters; pitches, tolerances; aerospace series |
prEN 2158-3-1979 |
航空航天系列 MJ螺纹 第3部分:公差和极限尺寸 |
MJ threads; part 3: tolerances and limiting dimensions; aerospace series |
prEN 2160-1978 |
航空航天系列 飞行器控制用涂锌碳素钢软钢丝绳、结构、尺寸、负载 |
Flexible wire ropes for aircraft controls in zinc coated carbon steel; construction, dimensions, loads; Aerospace series |
prEN 2161-1999 |
航空航天系列 耐热合金 CO-CH1401 (cocr26Ni11W) 未经热处理 精密铸件 |
Aerospace series - Heat resisting alloy CO-CH1401 (CoCr26Ni11W) - Not heat treated - Precision castings |
prEN 2167-1981 |
航空航天系列 溶溶处理的耐热钢FE-PA91-HT 棒材 |
Heat resisting steel FE-PA91-HT, solution treated; bars; aerospace series |
prEN 2169-1981 |
航空航天系列 溶溶处理的耐热钢FE-PA91-HT 焊接环用棒材和型材 |
Heat resisting steel FE-PA91-HT, solution treated; bars and sections for welded rings; aerospace series |
prEN 217-1984 |
牙科用硅酸盐胶(手混合) |
Dental silicate cement (hand-mixed) |
prEN 2173-1981 |
航空航天系列 经溶液处理和淀积处理的耐热阻抗合金 FE-PA93-HT 带材 |
Heat resisting steel FE-PA93-HT, solution treated and precipitation treated; bars; aerospace series |
prEN 2177-1999 |
标准号: |
中文标题: |
prEN 2178-1999 |
标准号: |
中文标题: |
prEN 218-1984 |
牙科用磷酸锌胶 |
Dental zinc phosphate cement |
prEN 2199-1998 |
标准号: |
中文标题: |
prEN 22-1985 |
木材防腐剂 对家天牛幼虫(Linnaeus)根除作用的测定(实验室法) |
Wood preservatives; determination of eradicant action against hylotrupes bajulus (Linnaeus) larvae (laboratory method) |
prEN 220-1985 |
合成橡胶牙科用压痕材料 |
Elastomeric dental impression materials |
prEN 2204-1998 |
标准号: |
中文标题: |
prEN 222-1984 |
地面移动机械 最小准入尺寸 |
Earth-moving machinery; minimum access dimensions |
prEN 2223-1981 |
航空航天系列 调质的钢FE-PL 32 空心棒材 |
Steel FE-PL32, hardened and tempered; bars; aerospace series |
prEN 223-1985 |
地面移动机械 翻转和掉落物体保护结构的实验室评估 偏差限制量规范 |
Earth-moving machinery; laboratory evaluations of roll-over and fallingobject protective structures; specifications for the deflection limiting volume |
prEN 2233-1998 |
标准号: |
中文标题: |
prEN 2234-2001 |
航空航天系列 耐火电缆 技术规则 |
Aerospace series - Cable, electrical, fire resistant - Technical specification |
prEN 2235-1999 |
航空航天系列 屏蔽和护套单芯和多芯电缆 |
Aerospace series - Single and multicore electric cables, screened and jacketed |
prEN 2237-1981 |
航空航天系列 经溶液处理和淀积处理的耐热钢 FE-PA91-HT 焊接环用棒材和型材 |
Heat resisting steel FE-PA91-HT, solution treated and precipitation treated; bars and sections for welded rings; aerospace series |
prEN 2238-1979 |
航空航天系列 经溶液处理和淀积处理的耐热钢 FE-PA91-HT 棒材 |
Aerospace series; heat resisting steel FE-PA 91-HT, solution treated and precipitation treated; bars |
prEN 224-1986 |
测试门的方法 由门合页不平度引起的偏移值的测定 |
Methods of testing doors; measurement of deviations from local flatness in door leaves |
prEN 2240-001-2000 |
航空航天系列 白炽灯 第001部分:技术规范 |
Aerospace series - Lamps, incandescent - Part 001: Technical specification |
prEN 2240-002-2000 |
航空航天系列 白炽灯 第002部分:重要特性 |
Aerospace series - Lamps, incandescent - Part 002: Main characteristics |
prEN 2240-100-1998 |
航空航天系列 白炽灯 第100部分:灯 代码2078 产品标准 |
Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078 - Product standard |
prEN 2240-101-1998 |
航空航天系列 白炽灯 第101部分:灯 代码404-02 产品标准 |
Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02 - Product standard |
prEN 2243-2-2001 |
航空航天系列 非金属材料 结构用粘合剂 试验方法 第2部分:金属-金属剥离 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal |
prEN 2243-3-2001 |
航空航天系列 结构用粘合剂 第3部分:试验方法 金属与蜂窝状心剥离试验 |
Aerospace series - Non-metallic materials; Structural adhesives; Test method - Part 3: Peeling test metal-honeycomb core |
prEN 2243-4-2001 |
航空航天系列 非金属材料 结构用粘合剂 试验方法 第4部分:金属与蜂窝状芯平直拉伸试验 |
Aerospace series - Non-metallic materials; Structural adhesives; Test method - Part 4: Metal-honeycomb core flatwise tensile test |
prEN 2243-5-2001 |
航空航天系列 非金属材料 结构用粘合剂 试验方法 第5部分:老化试验 |
Aerospace series - Non-metallic materials; Structural adhesives; Test method - Part 5: Ageing tests |
prEN 2243-6-2001 |
航空航天系列 非金属材料 结构用粘合剂 试验方法 第6部分:剪切应力和剪切应变的测定 |
Aerospace series - Non-metallic materials; Structural adhesives; Test method - Part 6: Determination of shear stress and shear strain |
prEN 2256-1998 |
航空航天系列 铝合金AL-P2618A-T852 手工锻造a ≤ 150 mm |
Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand forgings a ≤ 150 mm |
prEN 2266-002-2000 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第002部分:总则 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General |
prEN 2266-007-2000 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分:UV激光可打印的多芯套内电缆 产品 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard |
prEN 2267-002-2000 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 260 ℃ 之间 第002部分:总则 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: General |
prEN 2267-007-1999 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分:007 DMA 系列 单芯喷墨打印和多芯 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard |
prEN 2267-008-1999 |
航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第008部分:008 DMA 系列 单芯UV激光打印和多 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard |
prEN 23-1-1989 |
洗涤粉和清洁粉的包装 纤维板硬纸盒和圆筒的尺寸和体积 |
Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board |
prEN 231-1984 |
压缩空气过滤器和润滑器用模制透明聚碳酸酯辊筒 |
Moulded transparent polycarbonate bowls used in compressed air filters and lubricators |
prEN 2314-1984 |
航空航天系列 飞行门窗玻璃耐冲击丙稀酸的薄板 技术规范 |
Aerospace series; shock resistant acrylic sheets for aircraft glazing; technical specification |
prEN 2327-2002 |
航空航天系列 飞行操纵杆用径向锯齿锁紧镀镉合金钢垫圈规范 尺寸 |
Aerospace series - Washers, lock, with radial serrations, in alloy steel, cadmium plated for flight control rods - Dimensions |
prEN 2328-2002 |
航空航天系列 飞行操纵杆用镀镉耐腐蚀钢垫圈和垫片 飞行操作机构用镀镉杆 尺寸 |
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
prEN 2335-2001 |
航空航天系列 无装配槽耐腐蚀钢球面轴承 尺寸和载荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads |
prEN 2336-2001 |
航空航天系列 带装配槽的钢制球面轴承 尺寸和载荷 |
Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads |
prEN 2337-2001 |
航空航天系列 球面轴承 交货技术条件 |
Aerospace series - Spherical plain bearings - Technical specification |
prEN 2342-1982 |
航空航天系列 飞机门窗玻璃用耐蚀丙稀酸的薄板 技术法规 |
Aerospace series; resistant acrylic sheets for aircraft glazing; technical specification |
prEN 2345-1982 |
航空航天系列 铝和铝合金铆钉 技术规范 |
Aerospace series; aluminium and aluminium alloy rivets; technical specification |
prEN 2345-2-1999 |
航空航天系列 铝和铝合金实芯铆钉 米制系列 技术规范 |
Aerospace series - Rivets, solid, in aluminium or aluminium alloy, metric series - Technical specification |
prEN 2346-002-2001 |
航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第00部分:00 总则 |
Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 002: General |
prEN 2346-003-2001 |
航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第003部分:单芯 DL系列 总则 |
Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 003: DL family, single core; Product standard |
prEN 2346-004-2001 |
航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第004部分:DN 系列 UV单芯激光印刷和多芯组装 |
Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard |
prEN 2349-201-2000 |
航空航天系列 继电器和接触器的要求和试验程序 第201部分:目检 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection |
prEN 2349-202-2000 |
航空航天系列 继电器和接触器要求和试验程序 第202部分:尺寸和质量检查 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass |
prEN 2349-301-2000 |
航空航天系列 继电器和接触器要求和试验程序 第301部分:启动电压和释放电压 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage |
prEN 2349-302-2000 |
航空航天系列 继电器和接触器要求和试验程序 第302部分:绝缘电阻 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 302: nsulation resistance |
prEN 2349-303-2000 |
航空航天系列 继电器和接触器要求和试验程序 第303部分:电介质强度 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 303: Dielectric strength |
prEN 2349-304-2000 |
航空航天系列 继电器和接触器要求和试验程序 第304部分:工作时间和释放时间 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time |
prEN 2349-305-2000 |
航空航天系列 继电器和接触器要求和试验程序 第305部分:反弹时间 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time |
prEN 2349-306-2000 |
航空航天系列 继电器和接触器要求和试验程序 第306部分:超负荷的直流和交流 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c. |
prEN 2349-307-2000 |
航空航天系列 继电器和接触器要求和试验程序 第307部分:接触压降 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop |
prEN 2349-308-2000 |
航空航天系列 继电器和接触器要求和试验程序 第308部分:线圈电流 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current |
prEN 2349-309-2000 |
航空航天系列 继电器和接触器要求和试验程序 第309部分:输出尖峰信号 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes |
prEN 2349-310-2000 |
航空航天系列 继电器和接触器要求和试验程序 第310部分:绝缘击穿 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture |
prEN 2349-312-2000 |
航空航天系列 继电器和接触器要求和试验程序 第312部分:电气服务寿命和混合负载 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load |
prEN 2349-316-2000 |
航空航天系列 继电器和接触器要求和试验程序 第312部分:电气服务寿命和混合负载 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load |
prEN 2349-317-2000 |
航空航天系列 继电器和接触器要求和试验程序 第317部分:线圈开关器件的服务寿命 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device |