标准号 |
中文名称 |
英文名称 |
BS EN 1592-4-1998 |
铝和铝合金.HF有缝焊接管.正方形、矩形和异型管的尺寸和形状公差 |
(Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes) |
BS EN 1593-1999 |
无损试验.漏渗试验.气泡发散技术 |
(Non-destructive testing - Leak testing - Bubble emission techniques) |
BS EN 1594-2000 |
燃气供应系统.最大工作压力超过16巴的气体管道.功能要求 |
(Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements) |
BS EN 1595-1997 |
硼硅酸盐玻璃3.3制压力设备.计算,制造和检验的一般原理 |
(Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing) |
BS EN 1596-1998 |
专用于液化石油器的规范.移动式和便携式非家用驱动式对流直燃式空气加热器 |
(Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters) |
BS EN 1597-1-1997 |
焊熔.试验方法 .钢,镍和镍合金中所有焊接金属试样用试验片 |
(Welding consumables - Test methods - Test piece for all-weld metal test specimens in steel, nickel and nickel alloys) |
BS EN 1597-2-1997 |
焊熔.试验方法.钢单运和双运技术试验样品试验片的准备 |
(Welding consumables - Test methods - Preparation of test piece for single-run and two-run technique test specimens in steel) |
BS EN 1597-3-1997 |
焊熔.试验方法.圆角焊接焊接熔化位置容量的试验 |
(Welding consumables - Test methods - Testing of positional capability of welding consumables in a fillet weld) |
BS EN 1598-1998 |
焊接和类似工艺的健康保护和安全.电弧焊工艺用透明焊接隔板,板条和屏帘 |
(Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes) |
BS EN 1599-1997 |
焊料.抗蠕变钢手工金属弧焊接涂覆电极.分类 |
(Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification) |
BS EN 1600-1997 |
焊料.不锈和耐热钢手工金属弧焊接涂覆电极.分类 |
(Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification) |
BS EN 160000-1992 |
电子器件质量评定协调体系.总规范:模块式电子单 |
(Harmonized system of quality assessment for electronic components - Generic specification: modular electronic units) |
BS EN 1601-1997 |
石油和石油产品的试验方法.液态石油产品.无铅汽油.通过气相色谱法对有机氧化复合物和总有机结合氧含量的测 |
(Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatogr) |
BS EN 160100-1998 |
电子器件质量评定协调体系.分规范:经过质量评定的印制板组件制造厂的能力鉴定 |
(Harmonized system of quality assessment for electronic components - Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality) |
BS EN 160101-1998 |
电子器件质量评定协调系统.空白详细规范:经质量评定的装有电子模块的印制电路板.合格认证 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: printed board assembly modular electronic units of assessed quality - Capability approval) |
BS EN 1602-1997 |
建筑物用热绝缘产品.表面密度的测定 |
(Thermal insulating products for building applications - Determination of the apparent density) |
BS EN 160200-1-1998 |
电子件质量评定协调体系.分规范.经质量评定的微波组件电子设备.能力鉴定程序 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Microwave modular electronic units of assessed quality - Capability approval procedure) |
BS EN 160200-2-1998 |
电子器件质量评定协调体系.分规范:经质量评定的微波模数电子器件.试验方法索引 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Microwave modular electronic units of assessed quality - Index of test methods) |
BS EN 160201-1998 |
电子件质量评估的协调系统.空白详细规范.评估质量的微波模件电子件.容量的验收 |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Microwave modular electronic units of assessed quality - Capability approval) |
BS EN 1603-1997 |
建筑物用的隔热产品.在恒定常规实验室条件下尺寸稳定性的测定.(23℃/50%相对湿度) |
(Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 ℃/50% relative humidity)) |
BS EN 1604-1997 |
建筑物用的隔热产品.在特殊温度和湿度条件下尺寸稳定性的测定. |
(Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions) |
BS EN 1605-1997 |
建筑物用的隔热产品.在特殊压力负载和温度条件下变形的测定. |
(Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions) |
BS EN 1606-1997 |
建筑物用热绝缘产品.压缩蠕变的测定 |
(Thermal insulating products for building applications - Determination of compressive creep) |
BS EN 1607-1997 |
建筑物用的隔热产品.与表面垂直的抗拉强度的测定 |
(Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces) |
BS EN 1608-1997 |
建筑物用的隔热产品.与表面平行的抗拉强度的测定 |
(Thermal insulating products for building applications - Determination of tensile strength parallel to faces) |
BS EN 1609-1997 |
建筑物用的隔热产品.部分浸湿短期水吸收的测定 |
(Thermal insulating products for building applications - Determination of short term water absorption by partial immersion) |
BS EN 161-2002 |
气体燃烧器和燃气用具自动关闭阀 |
(Automatic shut-off valves for gas burners and gas appliances) |
BS EN 1610-1998 |
排水管和下水道的结构和试验 |
(Construction and testing of drains and sewers) |
BS EN 1611-1-2000 |
锯材.软木的外观等级.欧洲云杉木、松木、冷杉木和花旗松 |
(Sawn timber - Appearance grading of softwoods - European spruces, firs, pines and Douglas fir) |
BS EN 1612-1-1997 |
橡胶和塑料机械.反应制模机械.测量和混合单的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Safety requirements for metering and mixing units) |
BS EN 1612-2-2000 |
橡胶和塑料机械.反应制模机.反应制模设备的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Safety requirements for reaction moulding plant) |
BS EN 1615-2000 |
专用肠饲喂导管、喂食器及其连接器.设计和试验 |
(Enteral feeding catheters and enteral giving sets for single use and their connectors - Design and testing) |
BS EN 1616-1997 |
单个用的灭菌导尿管 |
(Sterile urethral catheters for single use) |
BS EN 1617-1997 |
单个用灭菌导液管道和辅助装置. |
(Sterile drainage catheters and accessory devices for single use) |
BS EN 1618-1997 |
除了管内导管外的其它导管.通用性能的测试法 |
(Catheters other than intravascular catheters - Test methods for common properties) |
BS EN 1619-1997 |
生物技术.大量加工和生产.应变保存过程管理和组织的一般要求 |
(Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures) |
BS EN 1620-1997 |
生物技术.大量加工和生产.根据危害度造的建筑物 |
(Biotechnology - Large-scale process and production - Plant building according to the degree of hazard) |
BS EN 1621-1-1998 |
摩托车驾驶员防机械冲击的防护服.冲击防护的试验方法和要求 |
(Motorcyclists’ protective clothing against mechanical impact - Requirements and test methods for impact protectors) |
BS EN 1621-2-2003 |
摩托车驾驶员防机械冲击的防护服.摩托车驾驶员背部防护装置.试验方法和要求 |
(Motorcyclists’ protective clothing against mechanical impact - Motorcyclists back protectors - Requirements and test methods) |
BS EN 1622-1998 |
水分析.极限臭味值(TON)和极限香味值(TFN) |
(Water analysis - Determination of the threshold odour number (TON) and threshold flavour number (TFN)) |
BS EN 1624-1999 |
织物和纺织产品.工业和技术织物的燃烧特性.垂直试样火焰传播的测定方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens) |
BS EN 1625-1999 |
织物和纺织产品.工业和技术织物的燃烧特性.垂直试样易燃性的测定方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens) |
BS EN 1626-1999 |
致冷容器.致冷用阀门 |
(Cryogenic vessels - Valves for cryogenic service) |
BS EN 1634-1-2000 |
门和遮板组件的耐火性试验.点燃门和遮板 |
(Fire resistance tests for door and shutter assemblies - Fire doors and shutters) |
BS EN 1634-3-2001 |
门和遮板组件的耐火性试验.烟雾控制门和遮板 |
(Fire resistance tests for door and shutter assemblies - Smoke control doors and shutters) |
BS EN 1634-3-2005 |
门和遮板组件的耐火性试验.防烟门和遮板 |
|
BS EN 1636-3-2001 |
常压排水管和下水道用塑料管道系统.不饱和聚酯树脂(UP)玻璃纤维增强热固塑料(GRP).配件 |
(Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Fittings) |
BS EN 1636-5-2001 |
常压排水管和下水道用塑料管道系统.以不饱和聚酯树脂(UP)为基础的玻璃纤维增强热固性塑料(GRP).接头的适应 |
(Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Fitness for purpose of the joints) |
BS EN 1637-1999 |
轻型输送带.电阻测量的试验方法 |
(Light conveyor belts - Test methods for the measurement of the electrical resistances) |
BS EN 1638-1997 |
塑料管道系统.玻璃增强热固塑料管道(GRP).柱状内压效果的试验方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure) |
BS EN 1639-1997 |
牙科学.牙科用医疗产品.器械 |
(Dentistry - Medical devices for dentistry - Instruments) |
BS EN 1639-2004 |
牙科学.牙科用医疗装置.器械 |
|
BS EN 1640-1997 |
牙科学.牙科学用医疗设备.设备 |
(Dentistry - Medical devices for dentistry - Equipment) |
BS EN 1640-2004 |
牙科学.牙科用医疗装置.设备 |
|
BS EN 1641-1997 |
牙科学.牙科用医疗产品.材料 |
(Dentistry - Medical devices for dentistry - Materials) |
BS EN 1641-2004 |
牙科学.牙科用医疗装置.材料 |
|
BS EN 1642-1997 |
牙科学.牙科用医疗产品.牙科植入物 |
(Dentistry - Medical devices for dentistry - Dental implants) |
BS EN 1642-2004 |
牙科学.牙科用医疗装置.牙科植入物 |
|
BS EN 1643-2000 |
燃气装置自动断开阀门的阀门供应系统 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances) |
BS EN 1644-1-1997 |
医用非织物纱布垫的检验方法.第1部分:制造纱布垫用的非织物 |
(Test methods for nonwoven compresses for medical use - Nonwovens used in the manufacture of compresses) |
BS EN 1644-2-2000 |
医用非织物纱布垫的检验方法.完整压缩 |
(Test methods for nonwoven compresses for medical use - Finished compresses) |
BS EN 1645-1-1999 |
休闲住宿车辆.居住挂车.与健康和安全有关的居住要求 |
(Leisure accommodation vehicles - Caravans - Habitation requirements relating to health and safety) |
BS EN 1645-2-1999 |
休闲住宿车辆.居住挂车.使用者净载重量 |
(Leisure accommodation vehicles - Caravans - User payloads) |
BS EN 1646-1-1999 |
休闲住宿车辆.机动居住挂车.与健康和安全有关的居住要求 |
(Leisure accommodation vehicles - Motor caravans - Habitation requirements relating to health and safety) |
BS EN 1646-2-1999 |
休闲住宿车辆.机动居住挂车.使用者净载重量 |
(Leisure accommodation vehicles - Motor caravans - User payloads) |
BS EN 1647-1999 |
休闲住宿车辆.假期家用居住挂车.与健康和安全有关的居住要求 |
(Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety) |
BS EN 1648-1-1998 |
装有休闲设备的车辆.12V直流超低压电器装置.挂车 |
(Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Caravans) |
BS EN 1648-2-1998 |
装有休闲设备的车辆.12V直流超低压电器装置.电动挂车 |
(Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Motor caravans) |
BS EN 1649-2004 |
AIDC技术.影响条形码符号读取的操作方面 |
|
BS EN 165-1996 |
护目器.词汇 |
(Personal eye-protection - Vocabulary) |
BS EN 1650-1998 |
化学消毒剂和防腐变剂.用于食品、工业、家庭和研究所领域的化学消毒剂和防腐变剂的杀菌活性评定用定量悬浮 |
() |
BS EN 165000-1-1996 |
薄膜集成电路和混合集成电路.通用规范:性能鉴定程序 |
(Film and hybrid integrated circuits - Generic specification: capability approval procedure) |
BS EN 165000-2-1996 |
薄膜集成电路和混合集成电路.内部可视检验和专用试验 |
(Film and hybrid integrated circuits - Internal visual inspection and special tests) |
BS EN 165000-3-1996 |
薄膜集成电路和混合集成电路.薄膜集成电路和混合集成电路制造商用自审定清单和报告 |
(Film and hybrid integrated circuits - Self-audit checklist and report for film and hybrid integrated circuit manufacturers) |
BS EN 165000-4-1996 |
薄膜集成电路和混合集成电路.用户信息,产品评估级别一缆表和空白详细规范 |
(Film and hybrid integrated circuits - Customer information, product assessment level schedules and blank detail specification) |
BS EN 165000-5-1998 |
薄膜集成电路和混合集成电路.质量鉴定程序 |
(Film and hybrid integrated circuits - Procedure for qualification approval) |
BS EN 1651-1999 |
滑翔设备.背带.安全要求和强度试验 |
(Paragliding equipment - Harnesses - Safety requirements and strength tests) |
BS EN 1652-1998 |
铜和铜合金.一般用途的平板、薄板材、带材和圆形材 |
(Copper and copper alloys - Plate, sheet, strip and circles for general purposes) |
BS EN 1653-1998 |
铜和铜合金.锅炉、压力容器和水蓄热器用的平板、薄板材和圆形材 |
(Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) |
BS EN 1654-1998 |
铜和铜合金.弹簧和连接器用带材 |
(Copper and copper alloys - Strip for springs and connectors) |
BS EN 1655-1997 |
铜和铜合金.合格证明书 |
(Copper and copper alloys - Declarations of conformity) |
BS EN 1656-2000 |
化学消毒剂和防腐变剂.用于兽医领域的化学消毒剂的杀菌活性评价的数量悬浮试验.试验方法和要求.(第2阶段/步 |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants used in veterinary field - Test method and requirements (pha) |
BS EN 1657-2000 |
化学消毒剂和防腐变剂.用于兽医领域的化学消毒剂的杀真菌活性评价的数量悬浮试验.试验方法和要求.(第2阶段/ |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and req) |
BS EN 1658-1997 |
对玻璃诊断仪器作标记的要求 |
(Requirements for marking of in vitro diagnostic instruments) |
BS EN 1659-1997 |
在实验室条件下的诊断系统.微生物培养基.术语和定义 |
(In vitro diagnostic systems - Culture media for microbiology - Terms and definitions) |
BS EN 166-2002 |
个人眼睛保护.规范 |
(Personal eye protection - Specifications) |
BS EN 1661-1998 |
带法兰的六角螺母 |
(Hexagon nuts with flange) |
BS EN 166100-1998 |
电子器件质量评定协调系统.分规范:表面声波(SAW)滤波器 |
(Harmonized system of quality assessment for electronic components - Sectional specification:surface acoustic wave (SAW) filters) |
BS EN 166101-1999 |
电子器件质量评定协调系统.空白详细规范:表面声波(SAW)滤波器.合格认证 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: surface acoustic wave (SAW) filters - Capability approval) |
BS EN 1662-1998 |
带法兰的六角螺栓.小型系列 |
(Hexagon bolts with flange - Small series) |
BS EN 1663-1998 |
带法兰的(非金属镶嵌)的扭矩型六角螺母 |
(Prevailing torque type hexagon nuts with flange (with non-metallic insert)) |
BS EN 1664-1998 |
带法兰的扭矩型全金属六角型螺母 |
(Prevailing torque type all-metal hexagon nuts with flange) |
BS EN 1665-1997 |
带法兰的六角头螺栓.重型系列 |
(Hexagon bolts with flange - Heavy series) |
BS EN 1666-1998 |
带米制精密螺纹法兰(非金属镶嵌)的扭矩型六角螺母 |
(Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread) |
BS EN 1667-1998 |
带米制精密螺纹法兰的全金属扭矩型六角螺母 |
(Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread) |
BS EN 1668-1997 |
焊料.非合金和细晶粒钢和钨极惰性气体保护焊用焊条,焊丝和沉积物.分类 |
(Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification) |
BS EN 1669-1997 |
铝及铝合金试验方法.薄板和带材的耳索试验 |
(Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip) |
BS EN 167-2002 |
个人眼睛保护.光学试验方法 |
(Personal eye protection - Optical test methods) |
BS EN 1670-1998 |
建筑五金.腐蚀抗性.要求和试验方法 |
(Building hardware - Corrosion resistance - Requirements and test methods) |
BS EN 1671-1997 |
建筑外压力污水系统 |
(Pressure sewerage systems outside buildings) |
BS EN 1672-2-1997 |
食品加工机械的基本设计原理.第2部分:卫生要求 |
(Food processing machinery - Basic concepts - Hygiene requirements) |
BS EN 1673-2000 |
食品加工机械.旋转支架烤炉.安全和卫生要求 |
(Food processing machinery - Rotary rack ovens - Safety and hygiene requirements) |
BS EN 1674-2000 |
食品加工机械.生面团和糕点揉面机.安全和卫生要求 |
(Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements) |
BS EN 1676-1997 |
铝及铝合金试验方法.冶练用合金铸锭规范 |
(Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) |
BS EN 1677-1-2000 |
吊索用部件.安全.8级锻钢制部件 |
(Components for slings - Safety - Forged steel components, Grade 8) |
BS EN 1677-2-2000 |
吊索用部件.安全.8级锻钢制带卡齿吊钩 |
(Components for slings - Safety - Forged steel lifting hooks with latch, Grade 8) |
BS EN 1677-3-2001 |
吊索用部件.安全.8级锻钢制自锁紧吊钩 |
(Components for slings - Safety - Forged steel self-locking hooks - Grade 8) |
BS EN 1677-4-2000 |
吊索用部件.安全.链,8级 |
(Components for slings - Safety - Links, Grade 8) |
BS EN 1677-5-2001 |
吊索件.安全.锻钢制带卡齿吊钩.4级 |
(Components for slings - Safety - Forged steel lifting hooks with latch - Grade 4) |
BS EN 1677-6-2001 |
吊索件.安全.链.4级 |
(Components for slings - Safety - Links - Grade 4) |
BS EN 1678-1998 |
食品加工机械.蔬菜切削机械.安全和卫生要求 |
(Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements) |
BS EN 1679-1-1998 |
往复式发动机.安全.压燃式发动机 |
(Reciprocating internal combustion engines - Safety - Compression ignition engines) |
BS EN 168-2002 |
个人眼睛保护.非光学试验方法 |
(Personal eye-protection - Non-optical test methods) |
BS EN 1680-1997 |
塑料软管系统.聚乙烯(PE)管道系统用管件.操作机械弯曲中和弯曲后密封性的检验方法 |
(Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism) |
BS EN 168100-1995 |
电子器件质量评定协调体系.石英晶体器件的分规范.(性能验收) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)) |
BS EN 168101-1990 |
电子件的质量保证协调体系.空白详细规范.石英晶体部件(性能认可) |
(Harmonized system of quality assessment for electronic components - Blank detail specification: quartz crystal units (capability approval)) |
BS EN 168200-1991 |
电子件质量评定协调系统.分规范:石英晶体部件(资格认证) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (qualification approval)) |
BS EN 168201-1996 |
电子器件的质量评估系统一致性.空白详细规范.石英晶体件(资格认可) |
Harmonized system of quality assessment for electronic components - Blank detail specification - Quartz crystal units - (Qualification approval) |
BS EN 169-2002 |
个人眼睛保护.在焊接和有关技术中用的滤色镜.透射率要求和推荐使用 |
Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
BS EN 170-1992 |
专用眼睛保护设备用紫外线滤色镜规范 |
Specification for ultraviolet filters used in personal eye-protection equipment |