标准号 |
中文名称 |
英文名称 |
DIN EN ISO 3915-1999 |
塑料.导电塑料电阻率的测量 |
Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999 |
DIN EN ISO 3927-2002 |
金属粉末(不包括硬质合金粉末).单轴向压缩时压塑性(压缩性)的测定 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001 |
DIN EN ISO 3947-1994 |
天然或加工淀粉.脂肪总含量的测定 |
Starches, native or modified - Determination of total fat content (ISO 3947:1977); German version EN ISO 3947:1994 |
DIN EN ISO 3950-1997 |
牙科学.牙齿和口腔区的名称体系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997 |
DIN EN ISO 3961-1999 |
动植物脂肪和油.碘值的测定 |
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:1996); German version EN ISO 3961:1999 |
DIN EN ISO 3977-5-2003 |
燃气轮机.采购.第5部分:石油和天然气工业的应用 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 |
DIN EN ISO 3993-1995 |
液化石油气和轻质烃类.密度或相对密度的测定.压力石油密度计法 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995 |
DIN EN ISO 3994-2000 |
塑料软管.含水物质的抽吸和排放用螺旋热塑强化的热塑塑料软管.规范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
DIN EN ISO 4014-2001 |
六角头螺栓.产品等级A和B |
Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
DIN EN ISO 4016-2001 |
六角头螺栓.产品等级C |
Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
DIN EN ISO 4017-2001 |
六角头螺钉.产品等级A和B |
Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000 |
DIN EN ISO 4018-2001 |
六角头螺钉.产品等级C |
Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000 |
DIN EN ISO 4023-1995 |
蒸汽用橡胶软管.试验方法 |
Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
DIN EN ISO 4026-2004 |
内六角平端紧定螺钉 |
|
DIN EN ISO 4027-2004 |
内六角锥端紧定螺钉 |
|
DIN EN ISO 4028-2004 |
内六角圆柱端紧定螺钉 |
|
DIN EN ISO 4029-2004 |
内六角凹端紧定螺钉 |
|
DIN EN ISO 4032-2001 |
1型六角螺母.产品等级A和B |
Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000 |
DIN EN ISO 4033-2001 |
2型六角螺母.产品等级A和B |
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000 |
DIN EN ISO 4034-2001 |
六角螺母.产品等级C |
Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000 |
DIN EN ISO 4035-2001 |
六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000 |
DIN EN ISO 4036-2001 |
六角薄螺母(不倒角).产品等级B |
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000 |
DIN EN ISO 4042-2001 |
紧固件.电解涂层(ISO 4042:1999) |
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 |
DIN EN ISO 4044-1998 |
皮革.化学试验用试样的制备 |
Leather - Preparation of chemical test samples (ISO 4044:1977); German version EN ISO 4044:1998 |
DIN EN ISO 4045-1998 |
皮革.pH值的测定 |
Leather - Determination of pH (ISO 4045:1977); German version EN ISO 4045:1998 |
DIN EN ISO 4047-1998 |
皮革.硫酸化总灰分和硫酸化不溶于水灰分的测定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977); German version EN ISO 4047:1998 |
DIN EN ISO 4048-1998 |
皮革.溶解在二氯甲烷中的物质的测定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977); German version EN ISO 4048:1998 |
DIN EN ISO 4049-2001 |
牙科学.可复原的封胶材料制成的聚脂填充物 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
DIN EN ISO 4063-2000 |
焊接及有关工艺.工艺和参考值的命名 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998); German version EN ISO 4063:2000 |
DIN EN ISO 407-2005 |
小型医用气瓶.针导轭式阀连接 |
|
DIN EN ISO 4073-2005 |
牙科设备.牙科治疗室设备项目.识别体系 |
|
DIN EN ISO 4074-2002 |
天然橡胶阴茎套的要求和试验方法 |
Natural latex condoms - Requirements and test methods (ISO 4074:2002); German version EN ISO 4074:2002 |
DIN EN ISO 4080-1995 |
橡胶和塑料软管及软管组件.透气性测定 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
DIN EN ISO 4090-2004 |
摄影.医用射线摄影盒式磁带/屏幕/胶片和硬拷贝成像胶片.尺寸和规范 |
|
DIN EN ISO 4119-1996 |
纸浆.浆料浓度的测定 |
Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996 |
DIN EN ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
DIN EN ISO 4126-2-2003 |
过压保护安全设备.第2部分:防爆板安全设备 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003 |
DIN EN ISO 4126-4-2004 |
过压保护安全设备.第4部分:安全操作导阀 |
|
DIN EN ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统 |
|
DIN EN ISO 4126-6-2004 |
过压保护安全设备.第6部分:安全隔板的应用、选择和安装 |
|
DIN EN ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
DIN EN ISO 4135-2002 |
麻醉和呼吸设备.词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
DIN EN ISO 4142-2003 |
实验室玻璃器皿.试管 |
Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002 |
DIN EN ISO 4157-1-1999 |
建筑用图纸.制图系统.第1部分:建筑物和建筑部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998); German version EN ISO 4257-1:1998 |
DIN EN ISO 4157-2-1999 |
建筑用图纸.制图系统.第2部分:房间名称与号码 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998); German version EN ISO 4157-2:1998 |
DIN EN ISO 4157-3-1999 |
建筑用图纸.制图系统.第3部分:房间标识 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998); German version EN ISO 4157-3:1998 |
DIN EN ISO 4165-2004 |
道路车辆.电气连接.双极连接 |
|
DIN EN ISO 4256-1999 |
液化石油气.蒸汽压力的测定.液化石油气法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998 |
DIN EN ISO 4257-2002 |
液化石油气.取样方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001 |
DIN EN ISO 4259-1996 |
石油产品.试验方法精度用数值的测定和应用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992 + Cor 1:1993); German version EN ISO 4259:1995 |
DIN EN ISO 4264-1996 |
石油产品.用四个可变等式法对柴油燃料十六烷指数的计算 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995); German version EN ISO 4264:1996 |
DIN EN ISO 4267-2-1996 |
石油和液体石油制品.油量的计算.第2部分:动态测量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988); German version EN ISO 4267-2:1995 |
DIN EN ISO 4287-1998 |
几何产品规范(GPS).表面结构:轮廓法.术语,定义和表面结构的参数 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997); German version EN ISO 4287:1998 |
DIN EN ISO 4288-1998 |
几何制品规范(GPS).表面构造:断面法.表面构造评估的规则和程序 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997 |
DIN EN ISO 4320-1997 |
非离子表面活性剂.浊点指数的测定.容量法 |
Non-ionic surface active agents - Determination of cloud point-index - Volumetric method (ISO 4320:1977, including Erratum:1980); German version EN ISO 4320:1997 |
DIN EN ISO 4375-2004 |
水文测验.河流测量用索道系统 |
|
DIN EN ISO 445-1998 |
物料装卸用托盘.词汇 |
Pallets for materials handling - Vocabulary (ISO 445:1996); German version EN ISO 445:1998 |
DIN EN ISO 449-1999 |
船舶和航海技术.磁罗盘,罗盘座和方位判读装置.A级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997); German version EN ISO 449:1999 |
DIN EN ISO 4490-2002 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001); German version EN ISO 4490:2001 |
DIN EN ISO 4516-2002 |
金属和其他无机镀层.维氏硬度计和努氏显微硬度试验机 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002 |
DIN EN ISO 4518-1995 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995 |
DIN EN ISO 4524-3-1995 |
金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995 |
DIN EN ISO 4524-6-1995 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988); German version EN ISO 4524-6:1994 |
DIN EN ISO 4526-2004 |
金属涂层.工程用镍电镀层 |
|
DIN EN ISO 4535-1999 |
釉瓷和搪瓷.抗洗涤纺织品用热洗涤剂溶液性能测定用仪器 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983); German version EN ISO 4535:1998 |
DIN EN ISO 4536-1995 |
金属基质上的金属和无机物涂层.盐液滴腐蚀试验(SD试验) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
DIN EN ISO 4538-1995 |
金属镀层.硫代乙酰胺腐蚀试验(TAA试验) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978); German version EN ISO 4538:1995 |
DIN EN ISO 4541-1995 |
金属和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
DIN EN ISO 4543-1995 |
金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则 |
Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
DIN EN ISO 4566-1995 |
舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995 |
DIN EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空气中氧化热稳定性的测定.烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999 |
DIN EN ISO 4583-1998 |
塑料.环氧树脂和有关材料.易皂化氯的测定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998); German version EN ISO 4583:1998 |
DIN EN ISO 4589-1-1999 |
塑料.通过氧指数测定其燃烧性.第1部分:导论 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999 |
DIN EN ISO 4589-2-1999 |
塑料.通过氧指数测定其燃烧性.第2部分:环境温度试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999 |
DIN EN ISO 4590-2003 |
硬质泡沫塑料.开孔和闭孔容积百分数测定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002); German version EN ISO 4590:2003) |
DIN EN ISO 4597-1-1998 |
塑料.环氧树脂的硬化剂和促进剂.第1部分:名称与牌号 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
DIN EN ISO 4599-1997 |
塑料.耐环境应力龟裂的测定.弯形条块法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996 |
DIN EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收的测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
DIN EN ISO 4610-2002 |
塑料.氯乙烯均聚物和共聚物树脂.使用气喷式筛滤器械的筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
DIN EN ISO 4611-2000 |
塑料.湿热,水溅和盐雾效果的测定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
DIN EN ISO 4612-1999 |
塑料.测试用途的聚氯乙烯(PVC)膏料制备.行星式混合器方法 |
Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999 |
DIN EN ISO 4613-1-1999 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第1部分:名称与符号及规范. |
Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999 |
DIN EN ISO 4613-2-1995 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第2部分:试样制造和性能测定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995 |
DIN EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛压模.可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
DIN EN ISO 4615-2000 |
塑料.未饱和的聚酯和环氧树脂.氯的总含量的测定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
DIN EN ISO 4617-2000 |
色漆和清漆.等义术语表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000); German version EN ISO 4617:2000 |
DIN EN ISO 4618-2-1999 |
漆和涂料.涂层材料的术语和定义.第2部分:漆的特征和性能的专门术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999); Trilingual version EN ISO 4618-2:1999 |
DIN EN ISO 4618-3-1999 |
漆和涂料.涂层材料的术语和定义.第3部分:表面准备和涂层方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999); Trilingual version EN ISO 4618-3:1999 |
DIN EN ISO 4622-1994 |
色漆和清漆.堆积压力试验 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994 |
DIN EN ISO 4623-1-2002 |
涂料和清漆.耐丝状腐蚀性的测定 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrate (ISO 4623-1:2000); German version EN ISO 4623-1:2002 |
DIN EN ISO 4623-2-2004 |
涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底 |
|
DIN EN ISO 4624-2003 |
色漆和清漆.粘附力拉脱试验 |
(Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002); German version EN ISO 4624:2003) |
DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第1部分:一般说明和名称与符号系统 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003); German version EN ISO) |
DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第1部分:一般说明和名称与符号系统 |
|
DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第10部分:丝状腐蚀等级评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003); German version EN ISO) |
DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第10部分:丝状腐蚀等级评定 |
|
DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第2部分:起泡等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003); German version EN ISO 4628-2:200 |
DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第2部分:起泡等级的评定 |
|
DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003); German version EN ISO 4628-3:2003) |
DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定 |
|
DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第4部分:裂纹等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003); German version EN ISO 4628-4:2003) |
DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第4部分:裂纹等级的评定 |
|
DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003); German version EN ISO 4628-5:2003) |
DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定 |
|
DIN EN ISO 4628-6-2002 |
涂料和清漆.涂料覆层降解的评定.一般缺陷的程度、数量和大小的规定.第6部分:起霜程度的粘胶带评定方法 |
Paints and varnishes - Evaluation of degradation of paint coatings; Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990); German version EN ISO 4628-6:2001 |
DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第7部分:粉化等级评定用丝绒方法 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003); German version E) |
DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第7部分:粉化等级评定用丝绒方法 |
|
DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第8部分:划痕周围脱层和腐蚀度的评定 |
|
DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第8部分:划痕周围脱层和腐蚀度的评定 |
|
DIN EN ISO 4629-1998 |
色漆介质.羟值的测定.滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996); German version EN ISO 4629:1998 |
DIN EN ISO 4651-1995 |
泡沫橡胶和塑料.动态弹性的测定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988); German version EN ISO 4651:1995 |
DIN EN ISO 4671-2000 |
橡胶和塑料软管及软管组件.尺寸测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
DIN EN ISO 4672-1999 |
橡胶和塑料软管低于室温的柔性试验 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
DIN EN ISO 4674-2-1998 |
橡胶或塑料涂层的织物.抗撕裂强度的测定.第2部分:冲击摆法 |
Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998 |
DIN EN ISO 472-2002 |
塑料.词汇 |
Plastics - Vocabulary (ISO 472:1999); German version EN ISO 472:2001 |
DIN EN ISO 4753-2000 |
紧固件.米制ISO外螺纹零件尾端 |
Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 |
DIN EN ISO 4757-1994 |
螺钉的十字槽 |
Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994 |
DIN EN ISO 4759-1-2001 |
紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A和C |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
DIN EN ISO 4759-3-2000 |
紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |