标准号 |
中文名称 |
英文名称 |
EN 13562-2000 |
土木织物及其相关产品 抗渗水性的测定(水压试验) |
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
EN 13564-1-2002 |
建筑物防洪装置 第1部分:要求 |
Anti-flooding devices for buildings - Part 1: Requirements |
EN 13564-2-2002 |
建筑物防洪装置 第2部分:试验方法 |
Anti-flooding devices for buildings - Part 2: Test methods |
EN 13566-1-2002 |
用于修复非压力排水和污水网的塑料管道系统 第1部分:总则 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
EN 13566-3-2002 |
用于修复非压力排水和污水网的塑料管道系统 第3部分:带密装配管的衬套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
EN 13566-4-2002 |
用于修复非压力排水和污水网的塑料管道系统 第4部分:带现场固化管的衬套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
EN 13567-2002 |
防护服 击剑者手、臂、腹部、小臂、生殖器及面部保护器 要求和试验方法 |
Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
EN 13569-2001 |
盒式卷筒卫生纸 性能要求和加工 |
Cabinet roller towels - Performance requirements and processing |
EN 13571-2001 |
鞋类 鞋面、内衬和衬底试验方法 抗撕裂强度 |
Footwear - Test methods for uppers, lining and insocks - Tear strength |
EN 13572-2001 |
鞋类 鞋面、内衬和衬底试验方法 接缝强度 |
Footwear - Test methods for uppers, lining and insocks - Seam strength |
EN 13573-2001 |
内河航运船舶 抛锚、联结、牵引、拖拉和停泊系统 |
Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems |
EN 13574-2001 |
内河航运船舶 长度不超过5m的永久性安装的攀登设备 |
Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m |
EN 13575-2004 |
吹模或旋转模制聚乙烯热塑罐.地上化学制剂储罐.要求和试验方法 |
|
EN 13579-2002 |
用于保护和修理混凝土结构的产品和系统 试验方法 疏水浸透物的干燥试验 |
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
EN 13580-2002 |
用于保护和修理混凝土结构的产品和系统 试验方法 疏水浸透物吸水性和耐碱性 |
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations |
EN 13581-2002 |
用于保护和修理混凝土结构的产品和系统 试验方法 化冻盐应力后疏水浸透混凝土质量损失的测定 |
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
EN 13583-2001 |
挠性防水板 沥青、塑料和橡胶屋面防水板 抗冰雹能力测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance |
EN 13584-2003 |
混凝土结构的保护和检修用产品和系统 试验方法 检修产品压缩蠕变的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
EN 13585-2001 |
食品 玉米中fumonisins B1和B2的测定 带固相萃取提取清理的高效液相色谱(HPLC)法 |
Foodstuffs - Determination of fumonisins B1 and B2 in maize - HPLC method with solid phase extraction clean-up |
EN 13586-2004 |
起重机.检修孔 |
|
EN 13588-2004 |
沥青和沥青粘合剂.用摆动试验测定沥青粘合剂的粘性 |
|
EN 1359-1998 |
燃气表 隔膜燃气表 |
Gas meters - Diaphragm gas meters |
EN 13590-2003 |
包装 用于各种零售物品运输的柔性运输袋 容积和承载力的一般特性和试验方法的测定 |
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
EN 13592-2003 |
收集家庭废物用塑料袋 类型、要求和试验方法 |
Plastics sacks for household waste collection - Types, requirements and test methods |
EN 13593-2003 |
包装 收集家庭废物用纸袋 类型、要求和试验方法 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
EN 13594-2002 |
职业摩托车手防护手套 要求和试验方法 |
Protective gloves for professional motorcycle riders - Requirements and test methods |
EN 13595-1-2002 |
职业摩托车手防护服 夹克、裤子和单件或分离式套装 第1部分:一般要求 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements |
EN 13595-2-2002 |
职业摩托车手防护服 夹克、裤子和单件或分离式套装 第2部分:测定抗撞击耐磨性的试验方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
EN 13595-3-2002 |
职业摩托车手防护服 夹克、裤子和单件或分离式套装 第3部分:测定爆裂强度的试验方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength |
EN 13595-4-2002 |
职业摩托车手防护服 夹克、裤子和单件或分离式套装 第4部分:测定抗撞击割裂性的试验方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance |
EN 13596-2004 |
防水用柔性薄板.混凝土船桥甲板和其他车辆行驶的混凝土表面的防水性.粘结强度的测定 |
|
EN 13597-2003 |
铁路设施 橡胶悬挂部件 气压悬挂弹簧橡胶膜片 |
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
EN 13598-1-2003 |
非压力底下排水和污水塑料管道系统 非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE) 第1部分:包括 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
EN 13599-2002 |
铜和铜合金 电气用途的铜板、铜片和铜条 |
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
EN 1360-1996 |
受测燃料配制用橡胶软管和软管部件 规范 |
Rubber hoses and hose assemblies for measured fuel dispensing - Specification |
EN 13600-2002 |
铜和铜合金 电气用途的无缝铜管 |
Copper and copper alloys - Seamless copper tubes for electrical purposes |
EN 136000-1992 |
通用规范:磁控管 |
Generic specification:Magnetrons |
EN 136001-1992 |
空白详细规范:脉冲磁腔管(不包括频率快变磁控管) |
Blank detail specification:Pulsed magnetrons (excluding frequency agile magnetrons) |
EN 136002-1992 |
空白详细规范:射频加热或烹调用C.W.磁控管 |
Blank detail specification: C.W. magnetrons for RF heating or cooking applications |
EN 13601-2002 |
铜和铜合金 常规电气用途的铜棒、铜条和铜线 |
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
EN 13602-2002 |
铜和铜合金 用于制造导电体的拉制圆铜线 |
Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
EN 13603-2002 |
铜和铜合金 评估电气用途拉制圆铜线上的保护锡镀层的试验方法 |
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
EN 13604-2002 |
铜和铜合金 电子管、半导体器件和真空设备用高导电率铜产品 |
Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
EN 13605-2002 |
铜和铜合金 电气用途的铜型材和型线材 |
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
EN 1361-1997 |
飞行燃油处理用橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for aviation fuel handling - Specification |
EN 1361-2004 |
航空燃料输送用橡胶软管和软管组件.规范 |
|
EN 13610-2002 |
化学消毒剂 评价食品和工业领域中使用的化学消毒剂抵御噬菌体的杀病毒作用的定量悬浮试验 试验方法和要求 |
Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
EN 13611-2000 |
气炉和燃气用具的安全和控制设备 一般要求 |
Safety and control devices for gas burners and gas-burning appliances - General requirements |
EN 13611/A1-2004 |
气体燃烧器和燃气器具的安全和控制装置.一般要求 |
|
EN 13611/A1-2004 |
气体燃烧器和燃气器具的安全和控制装置.一般要求 |
|
EN 13613-2001 |
滚轴运动器械 滑板 安全要求和试验方法 |
Roller sports equipment - Skateboards - Safety requirements and test methods |
EN 13614-2004 |
沥青和沥青粘合剂.使用水浸入试验测定沥青乳液的粘合性.集料法 |
|
EN 13616-2004 |
液体石油燃料用固定罐的防溢流装置 |
|
EN 13617-1-2004 |
加油站.第1部分:计量泵、分配器和遥控泵送设备的建造和性能的安全要求 |
|
EN 13617-2-2004 |
加油站.第2部分:计量泵、分配器用安全断路器建造和性能的安全要求 |
|
EN 13617-3-2004 |
加油站.第3部分:剪阀的建造和性能的安全要求 |
|
EN 13617-4-2004 |
加油站.第4部分:计量泵和配油器用转环的建造和性能的安全要求 |
|
EN 13619-2002 |
邮政服务 邮件自动处理 信件处理器的光学特性 |
Postal services - Mail item processing - Optical characteristics for processing letters |
EN 1362-1997 |
识别卡系统 设备接口特性 设备接口等级 |
Identification card systems - Device interface characteristics - Classes of device interfaces |
EN 13621-2004 |
食品加工机械.色拉干燥机.安全和卫生要求 |
|
EN 13622-2002 |
气焊设备 术语 有关气焊设备的术语 |
Gas welding equipment - Terminology - Terms used for gas welding equipment |
EN 13625-2001 |
无损检测 检漏 测量气体泄漏的仪器的选择指南 |
Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage |
EN 13626-2003 |
包装 箱平板架 通用要求和试验方法 |
Packaging - Box paletts - General requirements and test methods |
EN 13627-2000 |
推土机 下落物体保护结构 实验室试验和性能要求(ISO 3449:1992,修改) |
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:1992, modified) |
EN 13628-1-2002 |
包装 挠性包装材料 用静态净空气相色谱法测定残余溶剂 第1部分:绝对法 |
Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
EN 13628-2-2002 |
包装 挠性包装材料 用静态净空气相色谱法测定残余溶剂 第2部分:工业方法 |
Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
EN 13629-2002 |
木地板 实木预装配实心硬木地板 |
Wood flooring - Solid pre-assembled hardwood board |
EN 1363-1-1999 |
耐火试验 第1部分:一般要求 |
Fire resistance tests - Part 1: General requirements |
EN 1363-2-1999 |
耐火试验 第2部分:替换和添加程序 |
Fire resistance tests - Part 2: Alternative and additional procedures |
EN 13630-11-2002 |
民用炸药 导爆索和安全引信 第11部分:导爆索导爆速度的测定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 11: Determination of velocity detonation of detonating cords |
EN 13630-12-2002 |
民用炸药 导爆索和安全引信 第12部分:安全引信燃烧持续时间的测定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
EN 13630-2-2002 |
民用炸药 导爆索和安全引信 第2部分:导爆索和安全引信热稳定性的测定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
EN 13630-3-2002 |
民用炸药 导爆索和安全引信 第3部分:导爆索芯对磨擦敏感性的测定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords |
EN 13630-4-2002 |
民用炸药 导爆索和安全引信 第4部分:导爆索对撞击敏感性的测定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords |
EN 13630-6-2002 |
民用炸药 导爆索和安全引信 第6部分:导爆索抗拉强度的测定 |
Explosives for civil use - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords |
EN 13630-7-2002 |
民用炸药 导爆索和安全引信 第7部分:导爆索起爆可靠性的测定 |
Explosives for civil use - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords |
EN 13630-8-2002 |
民用炸药 导爆索和安全引信 第8部分:导爆索和安全引信耐水性的测定 |
Explosives for civil use - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses |
EN 13630-9-2004 |
民用爆炸物.引爆线和安全引信.第9部分:引爆线间引爆传输的测定 |
|
EN 13631-12-2004 |
民用爆炸物.烈性炸药.第12部分:具有不同起爆能力的引爆剂的规范 |
|
EN 13631-13-2003 |
民用炸药 烈性炸药 第13部分:密度测定 |
Explosives for civil uses - High explosives - Part 13: Determination of density |
EN 13631-14-2003 |
民用炸药 烈性炸药 第14部分:引爆速度的测定 |
Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation |
EN 13631-16-2004 |
民用爆炸物.烈性炸药.第16部分:毒性气体的检测和测量 |
|
EN 13631-2-2002 |
民用炸药 烈性炸药 第2部分:炸药热稳定性的测定 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives |
EN 13631-3-2004 |
民用爆炸物.烈性炸药.第3部分:爆炸物摩擦敏感度的测定 |
|
EN 13631-4-2002 |
民用炸药 烈性炸药 第4部分:炸药对撞击敏感性的测定 |
Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives |
EN 13631-5-2002 |
民用炸药 烈性炸药 第5部分:耐水性测定 |
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water |
EN 13631-6-2002 |
民用炸药 烈性炸药 第6部分:抗水压阻力的测定 |
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure |
EN 13634-2002 |
职业摩托车手防护鞋 要求和试验方法 |
Protective footwear for professional motocycle riders - Requirements and test methods |
EN 13635-2001 |
灌溉技术 局部灌溉系统 术语和制造商提供的数据 |
Irrigation techniques - Localised irrigation systems - Terminology and data to be supplied by the manufacturer |
EN 13636-2004 |
地下金属罐和相关管道的阴极保护 |
|
EN 13639-2002 |
石灰石中总有机碳含量的测定 |
Determination of total organic carbon in limestone |
EN 1364-1-1999 |
非承重构件的耐火试验 第1部分:墙 |
Fire resistance tests for non-loadbearing elements - Part 1: Walls |
EN 1364-2-1999 |
非承重构件的耐火试验 第2部分:顶棚 |
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
EN 13640-2002 |
体外诊断剂的稳定性试验 |
Stability testing of in vitro diagnostic reagents |
EN 13641-2002 |
消除或减少与体外诊断剂相关的传染风险 |
Elimination or reduction of risk of infection related to in vitro diagnostic reagents |
EN 13645-2001 |
液化石油气装置和设备 贮存容量在5t到200t之间的陆上装置的设计 |
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
EN 13647-2002 |
木地板和镶木地板及木镶板和覆盖层 几何特性的测定 |
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics |
EN 13648-1-2002 |
低温容器 抗过压保护安全设备 第1部分:低温服务用安全阀 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
EN 13648-2-2002 |
低温容器 抗过压保护安全设备 第2部分:低温容器防爆盘安全设备 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic vessels |
EN 13648-3-2002 |
低温容器 抗过压保护安全设备 第3部分:要求排出量、容积和尺寸的测定 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing |
EN 13649-2001 |
固定源排放物 各气态有机化合物质量浓度的测定 活性炭和溶剂吸附法 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method |
EN 1365-1-1999 |
承重构件的耐火试验 第1部分:墙 |
Fire resistance tests for loadbearing elements - Part 1: Walls |
EN 1365-2-1999 |
承重钩件的耐火试验 第2部分:地板和屋顶 |
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
EN 1365-3-1999 |
承重钩件的耐火试验 第3部分:横梁 |
Fire resistance tests for loadbearing elements - Part 3: Beams |
EN 1365-4-1999 |
承重构件的耐火试验 第4部分:柱 |
Fire resistance tests for loadbearing elements - Part 4: Columns |
EN 1365-5-2004 |
承重部件的防火试验.第5部分:阳台和过道 |
|
EN 1365-6-2004 |
承重部件的防火试验.第6部分:楼梯 |
|
EN 13650-2001 |
土壤改良剂和生长介质 王水可溶物的萃取 |
Soil improvers and growing media - Extraction of aqua regia soluble elements |
EN 13651-2001 |
土壤改良剂和生长介质 氯化钙/DTPA(CAT)可溶营养物的萃取 |
Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients |
EN 13652-2001 |
土壤改良剂和生长介质 水溶性营养物和素的萃取 |
Soil improvers and growing media - Extraction of water soluble nutrients and elements |
EN 13653-2004 |
防水用柔性薄板.车辆通行用混凝土桥板和其他混凝土表面的防水.剪切强度的测定 |
|
EN 13654-1-2001 |
土壤改良剂和生长介质 氮的测定 第1部分:改进凯氏法 |
Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method |
EN 13654-2-2001 |
土壤改良剂和生长介质 氮的测定 第2部分:Dumas法 |
Soil improvers and growing media - Determination of nitrogen - Part 2: Dumas method |
EN 13655-2002 |
塑料 农业和园艺中使用的热塑性覆盖膜 |
Plastics - Mulching thermoplastic films for use in agriculture and horticulture |
EN 13656-2002 |
标准号: |
中文标题: |
EN 13657-2002 |
废物特性 用于素中王水可溶部分连续测定的溶出 |
Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
EN 13659-2004 |
遮板.包括安全的性能要求 |
|
EN 1366-1-1999 |
服务设施的耐火试验 第1部分:管道 |
Fire resistance tests for service installations - Part 1: Ducts |
EN 1366-2-1999 |
服务设施的耐火试验 第2部分:防火阀 |
Fire resistance tests for service installations - Part 2: Fire dampers |
EN 1366-3-2004 |
辅助设施的防火检验.第3部分:渗透封装 |
|