标准号 |
中文名称 |
英文名称 |
BS EN 1388-1-1996 |
与食品接触的材料和物品.硅化表面.第1部分:测定从陶瓷品中释放的铅和镉 |
(Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from ceramic ware) |
BS EN 1388-2-1996 |
与食品接触的材料和物品.硅化表面.第2部分:除陶瓷品外测定从硅化表面释放的铅和镉 |
(Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware) |
BS EN 13880-1-2003 |
热用接缝密封胶.25 鳦时密度测定的试验方法 |
(Hot applied joint sealants - Test method for the determination of density at 25 鳦) |
BS EN 13880-10-2003 |
热用接缝密封胶.连续膨胀和压缩后粘结性测定的试验方法 |
(Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression) |
BS EN 13880-11-2003 |
热用密封胶.功能试验用沥青试验块渗透性及与沥青路面兼容性测定的试验方法 |
(Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements) |
BS EN 13880-12-2003 |
热用接缝密封胶.粘结试验用混凝土试验块生产的试验方法(配方法) |
(Hot applied joint sealants - Test method for the manufacture of concrete test blocks for bond testing (recipe methods)) |
BS EN 13880-13-2003 |
热用填缝密封胶.非连续伸展性测定的试验方法(粘附试验) |
(Hot applied joint sealants - Test method for the determination of the discontinuous extension (adherence test)) |
BS EN 13880-2-2003 |
热用接缝密封胶.25 鳦时针入度测定的试验方法 |
(Hot applied joint sealants - Test method for the determination of cone penetration at 25 鳦) |
BS EN 13880-3-2003 |
热用密封胶.渗透性和恢复性(回弹性)测定的试验方法 |
(Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)) |
BS EN 13880-4-2003 |
热用密封胶.耐热性测定的试验方法.穿透值的变化 |
(Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value) |
BS EN 13880-5-2004 |
热用接缝密封胶.抗流动性测定的试验方法 |
|
BS EN 13880-6-2004 |
热用密封胶.试验用样品制备的方法 |
|
BS EN 13880-7-2003 |
热用接缝密封胶.接缝密封胶功能检验 |
(Hot applied joint sealants - Function testing of joint sealants) |
BS EN 13880-8-2003 |
热用接缝密封胶.燃料浸渍后耐燃料接缝密封胶重量变化的测定用试验方法 |
(Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion) |
BS EN 13880-9-2003 |
热用密封胶.与沥青路面兼容性的测定的试验方法 |
(Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements) |
BS EN 13885-2005 |
食品加工机.剪断机.安全和卫生要求 |
|
BS EN 13886-2005 |
食品加工机械.装有电动搅拌器和/或混合器的蒸煮罐.安全和卫生要求 |
|
BS EN 13887-2003 |
结构胶粘剂.胶粘剂粘结前金属和塑料表面制备指南 |
(Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding) |
BS EN 13888-2002 |
磁砖用泥浆.定义和规范 |
(Grouts for tiles - Definitions and specifications) |
BS EN 13889-2003 |
一般提升用锻钢卸扣.D形和弓形卸扣.等级为6.安全 |
(Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6. Safety) |
BS EN 1389-2004 |
高级工业陶瓷.陶瓷复合材料.物理性能.密度和表观孔隙率的测定 |
|
BS EN 13890-2002 |
工作场所空气.空气粒子中金属和类金属的测量程序.要求和试验方法 |
(Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods) |
BS EN 13891-2004 |
拉伸皮带材料.拉伸皮带材料的选择和使用指南 |
|
BS EN 13892-1-2002 |
找平层材料的试验方法.抽样、做标记和切割试验样品 |
(Methods of test for screed materials - Sampling, making and curing specimens for test) |
BS EN 13892-2-2002 |
找平层材料的试验方法.弯曲和压缩强度的测定 |
(Methods of test for screed materials - Determination of flexural and compressive strength) |
BS EN 13892-3-2004 |
找平层材料的试验方法.Boehme耐磨性的测定 |
|
BS EN 13892-4-2002 |
找平层材料的试验方法.BCA耐磨性的测定 |
(Methods of test for screed materials - Determination of wear resistance-BCA) |
BS EN 13892-5-2003 |
找平层材料的试验方法.磨损层用找平层材料耐滚动轮磨损的测定 |
(Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material for wearing layer) |
BS EN 13892-6-2002 |
找平层材料的试验方法.表面硬度的测定 |
(Methods of test for screed materials - Determination of surface hardness) |
BS EN 13892-7-2003 |
找平层材料的试验方法.有地板覆盖物时找平层材料耐滚动轮磨损的测定 |
(Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material with floor coverings) |
BS EN 13892-8-2002 |
找平层材料的试验方法.粘结强度的测定 |
(Methods of test for screed materials - Determination of bond strength) |
BS EN 13893-2002 |
弹性地板覆盖物、叠层地板覆盖物和铺地织物.干地板表面动态磨擦系数的测量 |
(Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces) |
BS EN 13894-2-2002 |
混凝土结构的修理和保护产品及系统.试验方法.硬化后,在动态负载下疲劳强度的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - After hardening) |
BS EN 13895-2003 |
织物.单丝.抗拉特性的测定 |
(Textiles - Monofilaments - Determination of tensile properties) |
BS EN 13898-2003 |
机床.安全.冷金属锯床 |
(Machine tools - Safety - Sawing machines for cold metal) |
BS EN 13899-2003 |
滚轴运动设备.旱冰鞋.安全要求和试验方法 |
(Roller sports equipment - Roller skates - Safety requirements and test methods) |
BS EN 139-1995 |
呼吸保护装置.与全罩式面罩、半罩式面罩或口罩一起使用的压缩空气导管呼吸装置.要求、试验和标志 |
(Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking) |
BS EN 13900-1-2003 |
颜料和填充剂.扩散方法和在塑料中可扩散性的评估.概述 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - General introduction) |
BS EN 13900-2-2003 |
颜料和填充剂.扩散方法和在塑料中可扩散性的评估.用两辊磨测定色彩特点和在增塑聚氯乙烯中的易扩散性 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-ro) |
BS EN 13900-3-2003 |
颜料和填充剂.扩散方法和在塑料中可扩散性的评估.用两辊磨测定色彩特点和炭黑及彩色颜料在聚乙烯中的易扩散 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylen) |
BS EN 13900-4-2004 |
颜料和填充剂.扩散方法和在塑料中可扩散性的评定.用双辊研磨机测定聚乙烯中白颜料的颜色性能和易扩散性 |
|
BS EN 13904-2003 |
卫生设备旋塞用低阻力淋浴出水口 |
(Low resistance shower outlets for sanitary tapware) |
BS EN 13905-2003 |
卫生设备旋塞用低阻力淋浴软管 |
(Low resistance shower hoses for sanitary tapware) |
BS EN 13906-1-2002 |
圆形金属丝和棒材制柱形螺旋弹簧.计算和设计.压缩弹簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Compression springs) |
BS EN 13906-2-2002 |
由圆形金属丝和棒材制成园柱形螺旋弹簧.计算和设计.伸展弹簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Extension springs) |
BS EN 13906-3-2002 |
由圆形金属丝和棒材制成园柱形螺旋弹簧.计算和设计.扭转弹簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Torsion springs) |
BS EN 1391-1998 |
皮革和鞋靴材料用胶粘剂.评估材料粘合程度的方法.最低要求和材料分类 |
(Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification) |
BS EN 13911-2004 |
消防员防护服.消防员用头盔的要求和试验方法 |
|
BS EN 13913-2003 |
铁路设施.橡胶悬挂部件.弹性体基机械部件 |
(Railway applications - Rubber suspension components - Elastomer-based mechanical parts) |
BS EN 13914-1-2005 |
外部粉刷和内部粉刷的设计、准备和实施.外部粉刷 |
|
BS EN 13918-2003 |
气焊设备.焊接、切割和相关工艺用储气瓶上的组合流量计调节器.分类、规范和试验 |
(Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests) |
BS EN 13919-2002 |
天然石材试验方法.在潮湿环境中二氧化硫的作用下天然石材耐老化的测定 |
(Natural stone test methods - Determination of resistance to ageing by SODOWN2 action in the presence of humidity) |
BS EN 1392-1998 |
皮革和鞋靴材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下测量粘合强度的试验方法 |
(Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Test methods for measuring the bond strength under specified conditions) |
BS EN 13920-1-2003 |
铝和铝合金.废料.一般要求、取样和试验 |
(Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests) |
BS EN 13920-10-2003 |
铝和铝合金.废料.含铝制废饮料罐的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans) |
BS EN 13920-11-2003 |
铝和铝合金.废料.含铝铜散热器的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators) |
BS EN 13920-12-2003 |
铝和铝合金.废料.含单一合金的车床切屑 |
(Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy) |
BS EN 13920-13-2003 |
铝和铝合金.废料.含两种或多种合金的混合车床切屑 |
(Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys) |
BS EN 13920-14-2003 |
铝和铝合金.废料.废铝包装件 |
(Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings) |
BS EN 13920-15-2003 |
铝和铝合金.废料.废铝包装件中已去除涂层的铝废料 |
(Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings) |
BS EN 13920-16-2003 |
铝和铝合金.废料.含浮渣、铁渣、溢出物和金属粒子的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics) |
BS EN 13920-2-2003 |
铝和铝合金.废料.非合金废铝 |
(Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap) |
BS EN 13920-3-2003 |
铝和铝合金.废料.废金属丝和电缆 |
(Aluminium and aluminium alloys - Scrap - Wire and cable scrap) |
BS EN 13920-4-2003 |
铝和铝合金.废料.含单一锻造合金的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy) |
BS EN 13920-5-2003 |
铝和铝合金.废料.含同一系列两种或多种锻造合金的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same series) |
BS EN 13920-6-2003 |
铝和铝合金.废料.含两种或多种锻造合金的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys) |
BS EN 13920-7-2003 |
铝和铝合金.废料.铸件废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of castings) |
BS EN 13920-8-2003 |
铝和铝合金.废料.为实施铝分离工艺必须采用粉碎工艺时产生的非铁材料废料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes) |
BS EN 13920-9-2003 |
铝和铝合金.废料.被粉碎的非铁材料在铝分离工艺中产生的废料 |
(Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous shredded materials) |
BS EN 13922-2003 |
危险物品运输用罐.罐的辅助设备.液体燃料防溢流系统 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels) |
BS EN 13925-1-2003 |
无损检验.来自多晶和非晶材料的X射线衍射.通用原理 |
(Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles) |
BS EN 13925-2-2003 |
无损检验.来自多晶和非晶材料的X射线衍射.程序 |
(Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Procedures) |
BS EN 13925-3-2005 |
无损检验.多晶和非晶材料的X射线衍射.仪器 |
|
BS EN 13926-2003 |
表面活性剂.烷氧基衍生物.羟基值的测定.N-甲基咪唑法 |
(Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method) |
BS EN 13927-2003 |
无损检验.目视检验.设备 |
(Non-destructive testing - Visual testing - Equipment) |
BS EN 1393-1997 |
塑料管道系统.玻璃增强热固性塑料(GRP)管.初始径向拉伸特性的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties) |
BS EN 13938-1-2004 |
民用爆炸物.推进剂和火箭推进剂.要求 |
|
BS EN 13938-1-2004 |
民用爆炸物.推进剂和火箭推进剂.要求 |
|
BS EN 13938-2-2004 |
民用爆炸物.推进剂和火箭推进剂.抗静电能的测定 |
|
BS EN 13938-2-2004 |
民用爆炸物.推进剂和火箭推进剂.抗静电能的测定 |
|
BS EN 13938-3-2003 |
民用爆炸物.推进剂和火箭推进剂.爆燃到爆炸过渡时间的测定 |
(Explosives for civil uses - Propellants and rocket propellants - Determination of deflagration to detonation transition) |
BS EN 13938-5-2004 |
民用爆炸物.推进剂和火箭推进剂.气孔和裂缝的测定 |
|
BS EN 13938-5-2004 |
民用爆炸物.推进剂和火箭推进剂.气孔和裂缝的测定 |
|
BS EN 13938-6-2004 |
民用爆炸物.推进剂和火箭推进剂.固态火箭推进剂.抑制剂涂层完整性的测定指南 |
|
BS EN 13938-7-2004 |
民用爆炸物.推进剂和火箭推进剂.黑火药特性的测定 |
|
BS EN 1394-1997 |
塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.外表初始圆周抗拉强度的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength) |
BS EN 13941-2003 |
直接加热的预绝缘粘结管系统的设计和安装 |
(Design and installation of preinsulated bonded pipe systems for direct heating) |
BS EN 13942-2003 |
石油和天然气工业.管道输送.管道阀 |
(Petroleum and natural gas industries - Pipeline transportation - Pipeline valves) |
BS EN 13946-2003 |
水质.河水中底栖硅藻类常规取样和预处理的指导性标准 |
(Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers) |
BS EN 13949-2003 |
呼吸设备.与压缩的Nitrox和氧气一起使用的开路自主式潜水仪.要求、试验、标记 |
(Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking) |
BS EN 1395-1996 |
热喷涂.热喷涂设备的验收检验 |
(Thermal spraying - Acceptance inspection of thermal spraying equipment) |
BS EN 13951-2003 |
液泵.安全要求.农产品设备.使用中卫生保证的设计原则 |
(Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use) |
BS EN 13952-2003 |
石油液化气(LPG)罐.填充规程 |
(LPG cylinders - Filling procedures) |
BS EN 13953-2003 |
液化石油气(LPG)用移动式可填充储气瓶的减压安全阀 |
(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)) |
BS EN 13955-2002 |
表面活性剂.离子型表面活性剂的克拉夫特点和溶解性的测定 |
(Surface active agents - Determination of Krafft point and solubility of ionic surface active agents) |
BS EN 13956-2005 |
防水用弹性薄板.屋顶防水用塑料和橡胶薄板.定义和特性 |
|
BS EN 13957-2003 |
铝和铝合金.一般用途挤压圆形盘管.规范 |
(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification) |
BS EN 13958-2003 |
铝和铝合金.一般用途冷拉圆形盘管.规范 |
(Aluminium and aluminium alloys - Cold drawn, round coiled tube for general applications - Specification) |
BS EN 1396-1997 |
铝及铝合金.一般用途的成卷涂覆薄板和带材规范 |
(Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) |
BS EN 13964-2004 |
吊顶.要求和试验方法 |
|
BS EN 13964-2004 |
吊顶.要求和试验方法 |
|
BS EN 13965-1-2004 |
废弃物的特性.术语.材料相关术语和定义 |
|
BS EN 13965-1-2004 |
废弃物的特性.术语.材料相关术语和定义 |
|
BS EN 13965-2-2004 |
废弃物的特性.术语.管理相关术语和定义 |
|
BS EN 13966-1-2003 |
液态涂层材料用雾化及喷涂设备输送效率的测定.平板条 |
(Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels) |
BS EN 1397-1999 |
热交换器.液体循环加热的电扇线圈件.性能稳定性的试验过程 |
(Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance) |
BS EN 13970-2005 |
防水用柔性薄板.沥青水蒸气控制层.定义和特性 |
|
BS EN 13971-2003 |
碳酸盐石灰材料.活性测定.盐酸的电位滴定法 |
(Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid) |
BS EN 13972-2002 |
硬质塑料容器. |
(Rigid plastic containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity) |
BS EN 13973-2002 |
硬质塑料容器.排水能力测定方法 |
(Rigid plastics containers - Method for determination of drainability) |
BS EN 13974-2002 |
硬质塑料容器.尺寸、重量和体积的公差规范 |
(Rigid plastics containers - Specification of tolerance for dimensions, weight and volume) |
BS EN 13975-2003 |
实验室条件下诊断用医疗装置的验收试验用取样规程.统计特性 |
(Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects) |
BS EN 13976-1-2004 |
营救系统.婴儿保温箱的运输.接口条件 |
|
BS EN 13976-2-2004 |
营救系统.婴儿保温箱的运输.系统要求 |
|
BS EN 13977-2005 |
铁路设施.轨道.建造和维修用便携式机械和手摇车的安全要求 |
|
BS EN 13979-1-2004 |
铁路设施.轮副和转向架.整轮.技术验收程序.锻制和轧制轮 |
|
BS EN 13979-1-2004 |
铁路设施.轮副和转向架.整轮.技术验收程序.锻制和轧制轮 |
|
BS EN 1398-1998 |
船坞水平仪 |
(Dock levellers) |
BS EN 13980-2002 |
潜在爆炸性环境.质量体系的应用 |
(Potentially explosive atmospheres - Application of quality systems) |
BS EN 13981-1-2003 |
铝和铝合金.结构性铁道制品.检验和交货技术条件.挤压制品 |
(Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Extruded products) |