标准号 |
中文名称 |
英文名称 |
EN 435-1994 |
弹性地板覆盖物 挠性测定 |
Resilient floor coverings - Determination of flexibility |
EN 436-1994 |
弹性地板覆盖物 密度的测定 |
Resilient floor coverings - Determination of density |
EN 437-2003 |
试验气体 试验压力 器具分类 |
Test gases - Test pressures - Appliance categories |
EN 438-1-1991 |
装饰高压层压板(HPL) 以热固树脂为基质的板 第1部分:规范 |
Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987 modified) |
EN 438-2-1991 |
装饰高压层压板(HPL) 以热固树脂为基质的板 第2部分:特性测定 |
Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988 modified) |
EN 439-1994 |
焊接消耗品 电弧焊和切割用保护气体 |
Welding consumables - Shielding gases for arc welding and cutting |
EN 440-1994 |
焊接消耗品 非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物 分类 |
Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
EN 441-10-1994 |
冷动式陈列柜 第10部分:除臭试验 |
Refrigerated display cabinets - Part 10: Test for absence of odour and taste |
EN 441-11-1994 |
冷动式陈列柜 第11部分:安装、维修和用户指南 |
Refrigerated display cabinets - Part 11: Installation, maintenance and users guide |
EN 441-12-1997 |
冷动式陈列柜 第12部分:与冷凝器分开安装的冰柜的排热率的测量 |
Refrigerated display cabinets - Part 12: Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet |
EN 441-2-1994 |
冷动式陈列柜 第2部分:机械和物理的一般要求 |
Refrigerated display cabinets - Part 2: General mechanical and physical requirements |
EN 441-3-1994 |
冷动式陈列柜 第3部分:线性尺寸、面积和容积 |
Refrigerated display cabinets - Part 3: Linear dimensions, areas and volumes |
EN 441-4-1994 |
冷动式陈列柜 第4部分:一般试验条件 |
Refrigerated display cabinets - Part 4: General test conditions |
EN 441-6-1994 |
冷动式陈列柜 第6部分:根据温度进行分类 |
Refrigerated display cabinets - Part 6: Classification according to temperature |
EN 441-7-1994 |
冷动式陈列柜 第7部分:除霜试验 |
Refrigerated display cabinets - Part 7: Defrosting test |
EN 441-8-1994 |
冷动式陈列柜 第8部分:水蒸气冷凝试验 |
Refrigerated display cabinets - Part 8: Water vapour condensation test |
EN 441-9-1994 |
冷动式陈列柜 第9部分:电能消耗试验 |
Refrigerated display cabinets - Part 9: Electrical energy consumption test |
EN 442-3-2003 |
散热器和对流器 第3部分:合格评定 |
Radiators and convectors - Part 3: Evaluation of conformity |
EN 4420-2003 |
航空航天系列FE-PA3903合金钢弹性卡子 |
Aerospace series - Clips, spring tension, in alloy steel FE-PA3903 |
EN 443-1997 |
消防人员用头盔 |
Helmets for firefighters |
EN 444-1994 |
无损检测 用X和γ射线进行金属材料射线检查的一般原则 |
Non-destructive testing; general principles for radiographic examination of metallic materials by X- and gamma-rays |
EN 445-1996 |
预应力钢筋束灌浆 试验方法 |
Grout for prestressing tendons - Test methods |
EN 446-1996 |
预应力钢筋束灌浆 灌浆过程 |
Grout for prestressing tendons - Grouting procedures |
EN 447-1996 |
预应力钢筋束灌浆 普通灌浆规范 |
Grout for prestressing tendons - Specification for common grout |
EN 448-2003 |
热水分配管道 地下热水网用预隔热包覆层的管道系统 聚氨酯热绝缘和聚乙烯外覆层的钢铁管的配件 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 449-2002 |
专用液化石油气器具规范 家用无烟道空间加热器(包括普及型催化燃烧加热器) |
Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
EN 450-1994 |
混凝土飞灰 定义、要求和质量控制 |
Fly ash for concrete - Definitions, requirements and quality control |
EN 45002-1989 |
试验室评定的通用准则 |
General criteria for the assessment of testing laboratories |
EN 45003-1995 |
实验室认可系统的检定和测试 操作和认可的总要求 |
Calibration and testing laboratory accreditation system - General requirements for operation and recognition |
EN 45004-1995 |
检验机构工作的通用准则 |
General criteria for the operation of various types of bodies performing inspection |
EN 45010-1998 |
认证体系的评估和鉴定的一般要求 |
General requirements for assessment and accreditation of certification/registration bodies (ISO/IEC Guide 61:1996) |
EN 45011-1998 |
产品认证体系机构的一般要求 |
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
EN 45012-1998 |
质量体系的评估和认证/注册机构的一般要求 |
General requirements for bodies operating assessment and certification/registration of quality systems (ISO/IEC Guide 62:1996) |
EN 45014-1998 |
供货方货物合格申报的通用准则 |
General criteria for suppliers declaration of conformity (ISO/IEC Guide 22:1996) |
EN 45020-1998 |
标准化和相关活动 一般术语 |
Standardization and related activities - General vocabulary (ISO/IEC Guide 2:1996) |
EN 451-1-1994 |
飞灰的测试方法 第1部分:游离氧化钙含量的测定 |
Method of testing fly ash - Part 1: Determination of free calcium oxide content |
EN 451-2-1994 |
飞灰的测试方法 第2部分:用湿筛法测定细度 |
Method of testing fly ash - Part 2: Determination of fineness by wet sieving |
EN 452-1995 |
交换体 A级交换体 尺寸和一般要求 |
Swap bodies - Swap bodies of class A - Dimensions and general requirements |
EN 453-2000 |
食品加工机械 和面机 安全和卫生要求 |
Food processing machinery - Dough mixers - Safety and hygiene requirements |
EN 454-2000 |
食品加工机械 行星式搅拌机 安全和卫生要求 |
Food processing machinery - Planetary mixers - Safety and hygiene requirements |
EN 4549-2003 |
航空航天系列耐热钢或耐热镍基合金联管节焊接端头设计结构英制系列 |
Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded; Design configuration; Inch series |
EN 455-1-2000 |
一次性使用的医疗手套 第1部分:防洞要求和测试 |
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes |
EN 455-2-2000 |
一次性使用的医疗手套 第2部分:物理性能的要求和测试 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties (including Technical Corrigendum 1:1996) |
EN 455-3-1999 |
一次性使用的医疗手套 第3部分:生物评价的要求和测试 |
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
EN 4550-1-2003 |
航空航天系列37度联管节英制系列设计结构第1部分:球形阳密封端头 |
Aerospace series - Pipe coupling 37? Design configuration; Inch series - Part 1: Male sealing ends, spherical |
EN 4550-2-2003 |
航空航天系列37度联管节设计结构英制系列第2部分:开口端头 |
Aerospace series - Pipe coupling 37? Design configuration; Inch series - Part 2: Port ends |
EN 4550-3-2003 |
航空航天系列37度联管节设计结构英制系列第3部分:开口联接 |
Aerospace series - Pipe coupling 37? Design configuration; Inch series - Part 3: Port connections |
EN 4550-4-2003 |
航空航天系列37度联管节设计结构英制系列第4部分:阴密封端头 |
Aerospace series - Pipe coupling 37? Design configuration; Inch series - Part 4: Female sealing ends |
EN 45501-1992 |
非自动秤量仪的计量性能要求 |
Metrological aspects of non-automatic weighting instruments |
EN 45502-1-1997 |
活动可植入医疗器件 第1部分:制造商提供的安全、 标记和信息的一般要求 |
Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer |
EN 45503-1996 |
供水、 供能源、 交通以及通讯部门中合同裁决程序评估用证书标准 |
Attestation standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors |
EN 4551-2003 |
航空航天系列耐热钢37度联管节旋转螺母英制系列 |
Aerospace series - Pipe coupling 37? in heat resisting steel - Swivel nuts; Inch series |
EN 45510-1-1997 |
发电站设备采购指南 第1部分:.通用条款 |
Guide for procurement of power station equipment - Part 1: Common clauses |
EN 45510-2-2-1999 |
发电站设备的采购指南 第2-7部分:电气设备 不间断电源 |
Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies |
EN 45510-2-3-2000 |
发电站设备的采购指南 第2-3部分:电气设备 固定电池组和充电器 |
Guide for procurement of power station equipment - Part 2-3: Electrical equipment - Stationary batteries and chargers |
EN 45510-2-4-2000 |
发电站设备的采购指南 第2-4部分:电气设备 大功率固定变流器 |
Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors |
EN 45510-2-5-2002 |
电站设备采购指南 第2-5部分:电气设备 电动机 |
Guide for procurement of power station equipment - Part 2-5: Electrical equipment; Motors |
EN 45510-2-6-2000 |
发电站设备的采购指南 第2-6部分:电气设备 发电机 |
Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators |
EN 45510-2-7-2002 |
发电站设备的采购指南 第2-7部分:电气设备 开关装置和控制设备 |
Guide for procurement of power station equipment - Part 2-7: Electrical equipment; Switchgear and controlgear |
EN 45510-3-1-1999 |
发电站设备采购指南 第3-1部分:锅炉 水管锅炉 |
Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers |
EN 45510-3-2-1999 |
发电站设备采购指南 第3-2部分:.锅炉 .火管锅炉 |
Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers |
EN 45510-3-3-1999 |
发电站设备采购指南 第3-3部分:锅炉 流化床燃烧锅炉 |
Guide for procurement of power station equipment - Part 3-3: Boilers- Boilers with fluidized bed firing |
EN 45510-4-1-1999 |
电站设备采购指南 第4部分:锅炉辅助设备 第1节:除尘设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions |
EN 45510-4-10-1999 |
发电站设备采购指南 第4-10部分:.锅炉辅助设备 烟道气脱氮(DE-NOx)设备 |
Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant |
EN 45510-4-2-1999 |
电站设备采购指南 第4部分:锅炉辅助设备 第2节:烟气-空气、蒸气-空气和烟气-可燃气加热炉 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters |
EN 45510-4-3-1999 |
发电站设备采购指南 第4部分:锅炉辅助设备 第3节:通风设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 3: Draught plant |
EN 45510-4-4-2002 |
电站设备采购指南 第4-4部分:锅炉辅助设备 燃料配制设备 |
Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment |
EN 45510-4-5-2002 |
电站设备采购指南 第4-5部分:锅炉辅助设备 燃煤装卸和散料储存设备 |
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant |
EN 45510-4-6-1999 |
发电站设备采购指南 第4部分:.锅炉辅助设备 第6节: 烟气脱硫(DE-SOx)设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant |
EN 45510-4-7-1999 |
发电站设备采购指南 第4部分:锅炉辅助设备 第7节: 运灰处理设备 |
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 7: Ash handling plant |
EN 45510-4-8-1999 |
发电站设备采购指南 第4-8部分:锅炉辅助设备 尘埃处理设备 |
Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant |
EN 45510-4-9-1999 |
发电站设备采购指南 第4-9部分:.锅炉辅助设备 除烟垢器 |
Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers |
EN 45510-5-1-1998 |
发电站设备采购指南 第5-1部分:.汽轮机 |
Guide for procurement of power station equipment - Part 5-1: Steam turbines |
EN 45510-5-2-1998 |
发电站设备采购指南 第5-2部分:.燃气轮机 |
Guide for procurement of power station equipment - Part 5-2: Gas turbines |
EN 45510-5-3-1998 |
发电站设备采购指南 第5-3部分:.风力涡轮机 |
Guide for procurement of power station equipment - Part 5-3: Wind turbines |
EN 45510-5-4-1998 |
发电站设备采购指南 第5-4部分:.水力涡轮机、水力、液力存储器泵和涡轮泵 |
Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines |
EN 45510-6-1-1998 |
发电站设备采购指南 第6-1部分:.涡轮机辅助设备 脱气器 |
Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
EN 45510-6-2-1998 |
发电站设备采购指南 第6-2部分:涡轮机辅助设备 给水加热器 |
Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
EN 45510-6-3-1998 |
发电站设备采购指南 第6-3部分:涡轮机辅助设备 冷凝设备 |
Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
EN 45510-6-4-1999 |
发电站设备采购指南 第6-4部分:涡轮机辅助设备 泵 |
Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
EN 45510-6-5-1999 |
发电站设备采购指南 第6-5部分:涡轮机辅助设备 干式冷却系统 |
Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems |
EN 45510-6-6-1999 |
发电站设备采购指南 第6-6部分:涡轮机辅助设备 湿式和湿/干式冷却塔 |
Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers |
EN 45510-6-7-1998 |
发电站设备采购指南 第6-7部:涡轮机辅助设备 潮气分离回热炉 |
Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
EN 45510-6-8-1999 |
发电站设备采购指南 第6-8部分:涡轮机辅助设备 起重机 |
Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes |
EN 45510-6-9-1999 |
发电站设备采购指南 第6-9部分:涡轮机辅助设备 冷却水系统 |
Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems |
EN 45510-7-1-1999 |
发电站设备、设备和系统的采购指南 第7-1部分:管道系统和阀门 高压管道系统 |
Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems |
EN 45510-7-2-1999 |
发电站设备、设备和系统的采购指南 第7-2部分:管道系统和阀门 锅炉和高压管道阀 |
Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves |
EN 45510-8-1-1998 |
发电站设备的采购的指南 第8-1部分:控制和测试设备 |
Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
EN 4552-2003 |
航空航天系列耐热钢37度球形联管节焊接直接头 英制系列 |
Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end; Inch series |
EN 4553-2003 |
航空航天系列耐热钢37度球形联管节焊接90度弯接头英制系列 |
Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Elbow 90?nipples, welded end; Inch series |
EN 4554-2003 |
航空航天系列耐热钢37度球形联管节直螺纹管接头英制系列 |
Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight unions, threaded; Inch series |
EN 45544-1-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第1部分:试验方法和一般要求 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
EN 45544-2-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第2部分:极限值域内浓度测量用设备的性能 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values |
EN 45544-3-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第3部分:大大超过极限值的浓度测量用设备 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values |
EN 45544-4-1999 |
工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第4部分:.选择、安装、使用和维修的指南 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
EN 4555-2003 |
航空航天系列耐热钢37度联管节焊接箍英制系列 |
Aerospace series - Pipe coupling 37? in heat resisting steel - Ferrules, welded end; Inch series |
EN 4556-2003 |
航空航天系列耐热钢37度联管节管帽组件英制系列 |
Aerospace series - Pipe coupling 37? in heat resisting steel - Cap assemblies; Inch series |
EN 4557-2003 |
航空航天系列耐热钢37度球形联管节焊末端T形接头英制系列 |
Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Tees nipples, welded end; Inch series |
EN 456-1991 |
色漆、清漆以及有关产品 闪点的测定 快速平衡法(ISO 3679-1983,修改) |
Paints, varnishes and related products - Determination of flashpoint - Rapid equilibrium method (ISO 3679:1983 modified) |
EN 4560-2003 |
航空航天系列承受压力可到21000 kPa的37度球形联管节技术规范英制系列 |
Aerospace series - Pipe coupling 37? spherical, up to 21 000 kPa - Inch series; Technical specification |
EN 4561-2003 |
航空航天系列耐热钢焊接联管节90度弯管英制系列 |
Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90? Inch series |
EN 4562-2003 |
航空航天系列耐热钢焊接联管节变径管英制系列 |
Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors; Inch series |
EN 4563-2003 |
航空航天系列耐热钢焊接联管节T形接头英制系列 |
Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees; Inch series |
EN 457-1992 |
机械安全 听觉危险信号 一般要求、设计和测试(ISO 7731-1986,修改) |
Safety of machinery; Auditory danger signals; General requirements, design and testing (ISO 7731:1986, modified) |
EN 458-1993 |
听力保护装置 选择、使用、注意及维修的推荐规程 指导文件 |
Hearing protectors; Recommendations for selection, use, care and maintenance; guidance document |
EN 4585-2003 |
航空航天系列弹性卡子技术规范 |
Aerospace series - Clips, spring tension - Technical specification |
EN 459-1-2001 |
建筑石灰 第1部分:定义、规范和合格准则 |
Building lime - Part 1: Definitions, specifications and conformity criteria |
EN 459-2-2001 |
建筑石灰 第2部分:试验方法 |
Building lime - Part 2: Test methods |
EN 459-3-2001 |
建筑石灰 第3部分:合格评价 |
Building lime - Part 3: Conformity evaluation |
EN 46-1988 |
木材防腐剂 对家天牛 (Linnaeus)新孵化的幼虫预防作用的测定(实验室法) |
Wood preservatives; determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) (laboratory method) |
EN 460-1994 |
木材和木基制品的耐久性 实心木材的天然耐久性 在危险等级用的木材耐久性要求指南 |
Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
EN 46003-1999 |
质量体系 医疗设备 EN ISO 9003应用的特殊要求 |
Quality systems - Medical devices - Particular requirements for the application of EN ISO 9003 |
EN 461-1999 |
专用液化石油气器具规范 不超过10kKW的无烟道非家用空间加热器 |
Specifications for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW |
EN 461-2004 |
专用液化石油气装置规范.不超过10kW的无烟道非家用空间加热器 |
|
EN 461/prA1-2003 |
专用液化石油气器具规范 不超过10KW的无烟道非家用空间加热器 修改A1 |
Specifications for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW; Amendment A1 / Note: Intended as an amendment to EN 461 (1999-09). |
EN 462-1-1994 |
无损检测 射线照片的图像质量 第1部分:图像质量指示器(线型) 图像质量值的测定 |
Non-destructive testing; image quality of radiographs; Part 1: Image quality indicators (wire type); Determination of image quality value |
EN 462-2-1994 |
无损检测 射线照片的图像质量 第2部分:图像质量指示器(齿型和孔型) 图像质量值的测定 |
Non-destructive testing; image quality of radiographs; part 2: image quality indicators (step/hole type); determination of image quality value |
EN 462-3-1996 |
无损检测 射线照片的图像质量 第3部分:含铁金属图像质量的分级 |
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals |
EN 462-4-1994 |
无损检测 射线照片的图像质量 第4部分:图像质量值和图像质量表实验评定 |
Non destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables |
EN 462-5-1996 |
无损检测 射线照片的图像质量 第5部分:图像质量指示器(双线型) 图像不清晰值的测定 |
Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value |