标准号 |
中文名称 |
英文名称 |
EN ISO 16048-2003 |
耐蚀不锈钢紧固件的钝化 |
Passivation of corrosion-resistant stainless steel fasteners (ISO 16048:2003) |
EN ISO 16054-2002 |
外科植入物外科植入物的最小数据组 |
Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000) |
EN ISO 16070-2001 |
石油和天然气工业井下设备闭锁心轴和落地短接管 |
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001) |
EN ISO 16091-2002 |
航天系统整体逻辑支架 |
Space systems - Integrated logistic support (ISO 16091:2002) |
EN ISO 16101-2004 |
包装.危险货物的运输包装.塑料的兼容性试验 |
|
EN ISO 16104-2003 |
包装危险货物的运输包装试验方法 |
Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003) |
EN ISO 16140-2003 |
食品及动物饲料的微生物学交替法确认的协议 |
Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods (ISO 16140:2003) |
EN ISO 16147-2002 |
小艇内装柴油机装于发动机的燃料及电气件 |
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002) |
EN ISO 1622-1-1999 |
塑料聚苯乙烯(PS)模塑和挤塑材料第1部分:命名体系和基本规范 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994) |
EN ISO 1622-2-1999 |
塑料聚苯乙烯(PS)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995) |
EN ISO 1624-2001 |
塑料聚乙烯均聚物和共聚物树脂水中筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001) |
EN ISO 16264-2004 |
水质.用流动分析(FIA和CFA)法和光度检测法测定可溶性硅酸盐 |
|
EN ISO 1628-1-1998 |
塑料用毛细管粘度计测定稀溶液中聚合物的粘度第1部分:一般原则 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998) |
EN ISO 1628-2-1998 |
塑料用毛细管粘度计测定稀溶液中聚合物的粘度第2部分:聚氯乙烯树脂 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998) |
EN ISO 1628-3-2003 |
塑料用毛细管粘度计测定聚合物在稀释溶液中的粘数第3部分:聚乙烯和聚丙烯 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2001) |
EN ISO 16284-2001 |
眼科光学眼科光学设备的信息交换 |
Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001) |
EN ISO 16330-2003 |
往复式正排量泵和泵送装置技术条件 |
Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
EN ISO 16348-2003 |
金属及其他无机涂料有关外观的定义及习惯表示 |
Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003) |
EN ISO 16408-2004 |
牙科学.口腔卫生产品.口腔清洗 |
|
EN ISO 16426-2002 |
紧固件质量保证体系 |
Fasteners - Quality assurance system (ISO 16426:2002) |
EN ISO 16467-2003 |
包装危险货物的运输包装中型散装货物容器(IBCs)的试验方法 |
Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003) |
EN ISO 16484-2-2004 |
建筑物自动化和控制系统.第2部分:硬件 |
|
EN ISO 16582-2002 |
带拉断铁心和突头的开端盲铆钉Cu/St 或 Cu/Br 或 Cu/SSt |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002) |
EN ISO 16583-2002 |
带拉断铁心和埋头的开端盲铆钉Cu/St 或 Cu/Br 或 Cu/SSt |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002) |
EN ISO 16584-2002 |
带拉断铁心和突头的开端盲铆钉NiCu/St 或 NiCu/SSt |
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002) |
EN ISO 16585-2002 |
带拉断铁心和突头的开端盲铆钉A2/SSt |
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002) |
EN ISO 1660-1995 |
技术制图外形尺寸公差和注法 |
Technical drawings - Dimensioning and tolerancing of profiles (ISO 1660:1987) |
EN ISO 16654-2001 |
食品和动物饲料的微生物学检测大肠杆菌0157的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001) |
EN ISO 1666-1997 |
淀粉水含量的测定烘箱干燥法 |
Starch - Determination of moisture content - Oven-drying methods (ISO 1666:1996) |
EN ISO 16663-1-2003 |
渔网网眼大小测试方法第1部分:网眼开口 |
Fishing nets - Method of test for the determination of mesh size - Part 1: Mesh size opening (ISO 16663-1:2003) |
EN ISO 16663-2-2003 |
渔网网眼大小测试方法第2部分:网的长度 |
Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003) |
EN ISO 16672-2003 |
眼科植入物眼内填塞物 |
Ophthalmic implants - Ocular endotamponades (ISO 16672:2003) |
EN ISO 1675-1998 |
塑料液态树脂比重瓶法测定密度 |
Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985) |
EN ISO 1680-1999 |
声学测定旋转式电机发射的空气声的试验规程 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery (ISO 1680:1999) |
EN ISO 16871-2003 |
塑料管道和导管系统 塑料管道和配件 直接(自然)风化的方法 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
EN ISO 16931-2001 |
动植物脂肪和油高效尺寸筛析色谱法(HPSEC)测定聚合甘油三酯含量 |
Animal and vegetable fats and oils - Determination of polymerized triglycerides by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001) |
EN ISO 1716-2002 |
建筑产品耐火反应试验燃烧热的测定 |
Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002) |
EN ISO 17186-2002 |
皮革物理性能及机械性能试验表面涂层厚度测定 |
Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2002) |
EN ISO 17189-2003 |
黄油、食用油乳剂和涂抹脂肪脂肪含量的测定(参考法) |
Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003) |
EN ISO 172-1998 |
塑料酚-醛模塑件游离氨的检验 |
Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978) |
EN ISO 17227-2002 |
皮革物理性能及机械性能试验皮革耐干热性测定 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather (ISO 17227:2002) |
EN ISO 17229-2002 |
皮革物理性能及机械性能试验水蒸汽吸收性测定 |
Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002) |
EN ISO 17233-2002 |
皮革物理性能及机械性能试验表面涂层冷裂温度的测定 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002) |
EN ISO 17235-2002 |
皮革物理性能及机械性能试验劲度的测定 |
Leather - Physical and mechanical tests - Determination of softness (ISO 17235:2002) |
EN ISO 17236-2002 |
皮革物理性能及机械性能试验伸长永久形变的测定 |
Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002) |
EN ISO 17249-2004 |
防止链锯切割的安全鞋靴 |
|
EN ISO 17287-2003 |
道路车辆传输信息和控制系统的人类工效学布局评定整个驾驶系统呈适合性的方法 |
Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003) |
EN ISO 17292-2004 |
石油、石油化学和相关工业用金属球阀 |
|
EN ISO 17294-2-2004 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
|
EN ISO 1735-2004 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
EN ISO 1735-2004 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
EN ISO 1736-2000 |
乳粉和乳粉制品脂肪含量的测定重量分析法(参照法) |
Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000) |
EN ISO 1737-1999 |
淡炼乳和甜炼乳脂肪含量的测定重量分析法(参照法) |
Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999) |
EN ISO 1741-1994 |
葡萄糖干燥后质量损失的测定真空烘箱法 |
Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980) |
EN ISO 1746-2000 |
橡胶或塑料软管和管件弯曲试验 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
EN ISO 17495-2003 |
水质测定选用的硝基苯酚用质谱检查的固相提取与气相色谱法 |
Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001) |
EN ISO 175-2000 |
塑料测定液体化学品对塑料影响的试验方法 |
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999) |
EN ISO 17510-1-2002 |
睡眠窒息呼吸治疗第1部分:睡眠窒息呼吸治疗仪 |
Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy devices (ISO 17510-1:2002) |
EN ISO 17510-2-2003 |
睡眠窒息呼吸治疗第2部分:面罩和应用组装体 |
Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2003) |
EN ISO 17511-2003 |
体外诊断医疗装置生物样品的定量测量已知校正器及控制材料值的计量跟踪性 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
EN ISO 17526-2003 |
光学及光学仪器 激光及激光设备激光器的寿命 |
Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
EN ISO 176-1999 |
塑料增塑剂损耗的测定活性碳法 |
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:1976) |
EN ISO 17641-1-2004 |
金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则 |
|
EN ISO 17642-1-2004 |
金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则 |
|
EN ISO 17652-1-2003 |
焊接焊接和相关工艺车间底火的试验第1部分:一般要求 |
Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003) |
EN ISO 17652-2-2003 |
焊接焊接和相关工艺车间底火的试验第2部分:车间底火的焊接特性 |
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
EN ISO 17652-3-2003 |
焊接焊接和相关工艺车间底火的试验第3部分:热切割 |
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
EN ISO 17652-4-2003 |
焊接焊接和相关工艺车间底火的试验第4部分:焰气排放 |
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
EN ISO 17653-2003 |
金属焊缝的破坏性检查电阻点焊缝的扭矩 |
Destructive test on welds in metallic materials - Torsion of resistance spot welds (ISO 17653:2003) |
EN ISO 17654-2003 |
金属焊缝的破坏性损检查电阻焊 电阻焊缝的压力试验 |
Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003) |
EN ISO 17655-2003 |
金属焊缝的破坏性损检查测量德耳塔(δ)铁素体的取样方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003) |
EN ISO 17664-2004 |
医疗设备的消毒.由生产商提供的可再消毒医疗设备的处理过程的信息 |
|
EN ISO 17666-2003 |
航天装置风险经营 |
Space systems - Risk management (ISO 17666:2003) |
EN ISO 177-1999 |
塑料增塑剂分散性的测定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988) |
EN ISO 17708-2003 |
鞋整鞋的试验方法上鞋底粘附力 |
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) |
EN ISO 17776-2002 |
石油和天然气工业海上生产装置危险识别和风险评定用工具和技术的指南 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) |
EN ISO 178-2003 |
塑料弯曲性能测定 |
Plastics - Determination of flexural properties (ISO 178:2001) |
EN ISO 17836-2004 |
热喷涂.热喷涂熔敷效率的测定 |
|
EN ISO 179-1-2000 |
塑料摆锤式冲击特性的测定第1部分:非仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000) |
EN ISO 179-2-1999 |
塑料锤式冲击特性的测定第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997) |
EN ISO 1797-2-1995 |
牙科旋转器械柄第2部分:塑料柄 |
Dental rotary equipment - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992) |
EN ISO 1798-1999 |
软质泡沫聚合材料拉伸强度和断裂伸长的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997) |
EN ISO 17994-2004 |
水质.微生物方法之间的等效性建立标准 |
|
EN ISO 180-2000 |
塑料伊兆特冲击强度的测定 |
Plastics - Determination of Izod impact strength (ISO 180:2000) |
EN ISO 1806-2002 |
渔网网目断裂强力的测定 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002) |
EN ISO 18153-2003 |
体外诊断医疗装置生物样品的定量测量用已知校准器和控制材料确定酶中催化剂浓度值的计量可跟踪性 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003) |
EN ISO 182-2-1999 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第2部分:pH |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990) |
EN ISO 182-3-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第3部分:电 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993) |
EN ISO 182-4-2000 |
塑料基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定第 4部分:电 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993) |
EN ISO 18273-2004 |
焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类 |
|
EN ISO 18274-2004 |
焊接消耗品.镍和镍合金熔焊用实心焊丝、条和棒材.分类 |
|
EN ISO 18278-1-2004 |
电阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 |
|
EN ISO 18278-2-2004 |
电阻焊.可焊性.第2部分:点焊用薄钢板评定用备用程序 |
|
EN ISO 183-1999 |
塑料着色剂渗析的定性评估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976) |
EN ISO 18330-2003 |
乳及乳制品抗生素残留量检查用免疫检验或受体检验的标准化描述指南 |
Milk and milk products - Guidelines for a standardized description of immunoassays or receptor assays for the detection of antimicrobial residues (ISO 18330:2003) |
EN ISO 18513-2003 |
旅游服务饭店及其他旅游食宿种类术语 |
Tourism services - Hotels and other types of tourism accommodation - Terminology (ISO 18513:2003) |
EN ISO 1854-1999 |
乳清干酪脂肪含量的测定重量分析法(参照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999) |
EN ISO 1856-2000 |
可素纤维素聚合材料压缩装置测定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000) |
EN ISO 186-2002 |
纸和纸板测定平均质量的试样的采取 |
Paper and board - Sampling to determine average quality (ISO 186:2002) |
EN ISO 18609-2001 |
动物和植物脂肪和油不可皂化物质的测定乙烷提取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000) |
EN ISO 18613-2003 |
平木托盘的修理 |
Repair of flat wooden pallets (ISO 18613:2003) |
EN ISO 1872-2-1997 |
塑料聚乙烯(PE)模塑和挤塑材料第2部分:试样制备和性能测定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997) |
EN ISO 1873-1-1995 |
塑料聚丙烯(PP)模塑和挤塑材料第1部分:标识系统和基本规范 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995) |
EN ISO 1874-1-2000 |
塑料聚酰胺(PA)模塑和挤塑材料第1部分:命名 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992) |
EN ISO 1874-2-1995 |
塑料聚酰胺(PA)模塑和挤塑材料第2部分:试样制备和性能测定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995) |
EN ISO 18812-2003 |
健康信息学 临床分析仪与实验室信息系统之间的接口 使用情形 |
Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles (ISO 18812:2003) |
EN ISO 1886-1994 |
增强纤维适用于接收批料的抽样方案 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990) |
EN ISO 1889-1997 |
增强纱线密度的测定 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997) |
EN ISO 1890-1997 |
增强纱捻度的测定 |
Reinforcement yarns - Determination of twist (ISO 1890:1997) |
EN ISO 19011-2002 |
质量和/或环境管理体系审核指南 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) |
EN ISO 1923-1995 |
泡沫塑料和橡胶线性尺寸的测定 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981) |
EN ISO 1924-2-1995 |
纸和纸板拉伸性能的测定第2部分:恒速拉伸法 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994) |
EN ISO 1942-5-1994 |
牙医词汇第5部分:与测试有关的术语 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989) |
EN ISO 196-1995 |
锻铜和铜合金残余应力的检测硝酸亚汞试验 |
Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
EN ISO 1969-2004 |
纤维绳索.聚乙烯绳索.3和4股绳索 |
|
EN ISO 1973-1995 |
纺织纤维线密度的测定称重和振动法 |
Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995) |
EN ISO 19900-2002 |
石油和天然气工业海上结构的一般要求 |
Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002) |
EN ISO 19901-4-2003 |
石油和天然气工业海上结构的特殊要求 第4部分:土工技术和基础设计的考虑内容 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003) |
EN ISO 19901-5-2003 |
石油和天然气工业海上结构的特殊要求 第5部分:设计和施工中的重量控制 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003) |
EN ISO 19953-2004 |
鞋靴.鞋跟的试验方法.耐侧面冲击 |
|