标准号 |
中文名称 |
英文名称 |
EN ISO 3677-1995 |
软钎焊硬钎焊和钎接焊接用填充金属符号规定 |
Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992) |
EN ISO 3678-1995 |
色漆和清漆无印痕试验 |
Paints and varnishes - Print-free test (ISO 3678:1976) |
EN ISO 3679-2004 |
闪点的测定.快速平衡闭杯法 |
|
EN ISO 3680-2004 |
闪和非闪测定.快速平衡闭杯法 |
|
EN ISO 3681-1998 |
色漆和清漆用粘合剂皂化值的测定滴定法 |
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:1996) |
EN ISO 3690-2000 |
焊接与相关工艺在铁素体电弧焊金属中氢含量的测定 |
Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000) |
EN ISO 3696-1995 |
分析实验室用水规范和试验方法 |
Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
EN ISO 3715-1-2004 |
船舶和海上技术.船舶用推进装置.推进器的几何学词汇 |
|
EN ISO 3715-2-2002 |
船舶和造船技术推进设备与船舶第2部分:可调螺桨设备的词汇 |
Ships and marine technology - Propulsion plants and ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001) |
EN ISO 3727-1-2001 |
奶油水分、非脂肪固体和脂肪含量的测定第1部分:水分含量的测定 |
Butter - Determination of moisture, not-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001) |
EN ISO 3727-2-2001 |
奶油水分、非脂肪固体和脂肪含量的测定第2部分:非脂肪固体含量的测定 |
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001) |
EN ISO 3727-3-2003 |
奶油水分、非脂肪固体和脂肪含量的测定第3部分:脂肪含量的测定 |
Butter - Determination of moisture, not-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003) |
EN ISO 3735-1999 |
原油和燃料油沉积物的测定取样法 |
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735-1999) |
EN ISO 3740-2000 |
声学噪声源的声功率级的测定基本标准使用导则 |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
EN ISO 3741-1999 |
声学声压法测定噪声源的声功率级混响室精密法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999) |
EN ISO 3743-1-1995 |
声学噪声源的声功率级的测定混响声场中小型可移动声源的工程法第1部分:硬壁试验室中的比较法 |
Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
EN ISO 3743-2-1996 |
声学噪声源的声功率级的测定混响声场中小型可移动声源的工程法第2部分:专用混响试验室法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
EN ISO 3744-1995 |
声学声压法测定噪声源的声功率级一个反射面上方近似自由场中的工程法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
EN ISO 3746-1995 |
声学声压法测定噪声源的声功率级采用包络测面积的简易法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) |
EN ISO 3747-2000 |
声学声压法测定噪声源的声功率级现场比较法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000) |
EN ISO 3759-1995 |
纺织品测定尺寸变化试验用服装和织物样品的制备、标记和测量 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994) |
EN ISO 376-2002 |
金属材料单轴试验校验用校力检验仪的校准 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:1999) |
EN ISO 376-2004 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
|
EN ISO 3766-1999 |
建筑工程制图钢筋混凝土的简化画法 |
Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:1995) |
EN ISO 377-1997 |
钢和钢制品机械性能试验用样品和试件的配置与准备 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) |
EN ISO 3785-1995 |
钢试样轴的标识方法 |
Steel - Designation of test piece axes (ISO 3785:1976) |
EN ISO 3796-2001 |
船舶技术外部单扇门净开口 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999) |
EN ISO 3822-1-1999 |
声学供水设施的装置和设备发射的噪音的实验室测定第1部分:测量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999) |
EN ISO 3822-2-1995 |
声学供水设施的装置和设备发射的噪音的实验室测定第2部分:放水龙头和混合阀的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995) |
EN ISO 3822-3-1997 |
声学供水设施的装置和设备发射的噪音的实验室测定第3部分:管路阀门和器件的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances |
EN ISO 3822-4-1997 |
声学供水设施的装置和设备发射的噪音的实验室测定第4部分:专用器件的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances |
EN ISO 3823-1-1998 |
牙科旋转器械牙钻第1部分:不锈钢牙钻和硬质合金牙钻 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823:1997) |
EN ISO 3823-2-2003 |
牙科 旋转研磨器械 第2部分:抛光磨具 |
Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003) |
EN ISO 3830-1995 |
石油产品汽油中铅含量的测定一氯化碘法 |
Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993) |
EN ISO 3838-1995 |
原油和液体或固体石油产品密度或相对密度的测定毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Cappilary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983) |
EN ISO 3838-2004 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
|
EN ISO 3861-1997 |
喷砂用橡胶软管规范 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) |
EN ISO 3868-1994 |
金属和其他无机覆盖层镀层厚度的测量裵索多光束干射仪法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976) |
EN ISO 3882-2003 |
金属和其他无机覆盖层厚度的测量的方法评述 |
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
EN ISO 3887-2003 |
钢脱碳层深度的测定 |
Steel - Determination of depth of decarburization (ISO 3887:2003) |
EN ISO 389-1-2000 |
声学校正听力设备的基准零级第1部分:纯音和压耳式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998) |
EN ISO 389-2-1996 |
声学校正听力设备的基准零级第2部分:纯音和插入式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent treshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994) |
EN ISO 389-3-1998 |
声学校正听力设备的基准零级第3部分:骨振器纯声基准等效 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994) |
EN ISO 389-4-1998 |
声学校正听力设备的基准零级第4部分:窄带掩蔽噪声基准级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994) |
EN ISO 389-5-1999 |
声学校正听力设备的基准零级第5部分:8kHz-16kHz频率范围内的纯音的等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO/TR 389-5:1998) |
EN ISO 389-7-1998 |
声学校正听力设备的基准零级第7部分:自由场和扩散场收听条件下的基准听阈 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996) |
EN ISO 389-8-2004 |
声学.校准听力设备的基准零级.第8部分:纯音和环绕式耳机的基准等效阈声压级 |
|
EN ISO 3892-2001 |
金属材料上的转化膜单位面积膜层质量的测定重量法 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000) |
EN ISO 3915-1999 |
塑料导电塑料电阻率的测定 |
Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981) |
EN ISO 3927-2001 |
金属粉末不包括硬质合金粉末单轴向压制时压缩性的测定 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001) |
EN ISO 3946-1994 |
淀粉和淀粉制品总磷含量的测定分光光度法 |
Starches and derived products - Determination of total phosphorus content - Spectrophotometric method (ISO 3946:1982) |
EN ISO 3947-1994 |
天然或改良淀粉脂肪总含量的测定 |
Starches, native or modified - Determination of total fat content (ISO 3947:1977) |
EN ISO 3950-1997 |
牙科学牙齿和口腔区位的名称与符号体系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995) |
EN ISO 3952-1-1994 |
运动图图形符号第1部分 |
Kinematic diagrams - Graphical symbols - Part 1 (ISO 3952-1:1981) |
EN ISO 3952-2-1994 |
运动图图形符号第2部分 |
Kinematic diagrams - Graphical symbols - Part 2 (ISO 3952-2:1981) |
EN ISO 3952-3-1994 |
运动图图形符号第3部分 |
Kinematic diagrams - Graphical symbols - Part 3 (ISO 3952-3:1979) |
EN ISO 3952-4-1997 |
运动图图形符号第4部分 |
Kinematic diagrams - Graphic symbols - Part 4 (ISO 3952-4:1984) |
EN ISO 3953-1995 |
金属粉末摇实密度的测定 |
Metallic powders - Determination of tap density (ISO 3953:1993) |
EN ISO 3961-1999 |
动植物脂肪和油碘值的测定 |
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:1996) |
EN ISO 3977-5-2003 |
燃气轮机采购第5部分:石油与天然气工业的应用 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001) |
EN ISO 3993-1995 |
液化石油气和轻质烃类密度或相对密度的测定压力比重计法 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984) |
EN ISO 3994-2000 |
塑料软管给排水用螺纹型热塑性软管规范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998) |
EN ISO 4014-2000 |
六角头螺栓产品等级A和B级 |
Hexagon head bolts - Product grades A and B (ISO 4014:1999) |
EN ISO 4016-2000 |
六角头螺栓产品等级C级 |
Hexagon head bolts - Product grade C (ISO 4016:1999) |
EN ISO 4017-2000 |
六角头螺钉产品等级A和B级 |
Hexagon head screws - Product grades A and B (ISO 4017:1999) |
EN ISO 4018-2000 |
六角头螺钉产品等级C级 |
Hexagon head screws - Product grade C (ISO 4018:1999) |
EN ISO 4023-1995 |
蒸气胶管试验方法 |
Rubber hoses for steam - Test methods (ISO 4023:1991) |
EN ISO 4032-2000 |
六角螺母,1型产品等级A和B级 |
Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999) |
EN ISO 4033-2000 |
六角螺母,2型产品等级A和B级 |
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999) |
EN ISO 4034-2000 |
六角螺母产品等级C级 |
Hexagon nuts - Product grade C (ISO 4034:1999) |
EN ISO 4035-2000 |
六角薄螺母(倒角)产品等级A和B级 |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999) |
EN ISO 4036-2000 |
六角薄螺母(无倒角)产品等级B级 |
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999) |
EN ISO 4042-1999 |
紧固件电镀层 |
Fasteners - Electroplated coatings (ISO 4042:1999) |
EN ISO 4044-1998 |
皮革化学试验样品的制备 |
Leather - Preparation of chemical test samples (ISO 4044:1977) |
EN ISO 4045-1998 |
皮革pH值的测定 |
Leather - Determination of pH (ISO 4045:1977) |
EN ISO 4047-1998 |
皮革硫酸盐总灰分和硫酸盐水不溶物灰分的测定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977) |
EN ISO 4048-1998 |
皮革二氯甲烷萃取物的测定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977) |
EN ISO 4049-2000 |
牙科学聚合物基充填、修复及粘接材料 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000) |
EN ISO 4063-2000 |
焊接和相关工艺工艺名称和参照代码 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) |
EN ISO 4066-1999 |
建筑工程制图钢筋表 |
Construction drawings - Bar scheduling (ISO 4066:1994) |
EN ISO 407-2004 |
小型医用气瓶.针导轭式阀连接 |
|
EN ISO 4074-2002 |
天然橡胶避孕套要求与试验方法 |
Natural latex rubber condoms - Requirements and test methods (ISO 4074:2002) |
EN ISO 4090-2004 |
摄影.医用射线摄影磁带/屏幕/胶片和硬拷贝成像胶片.尺寸和规范 |
|
EN ISO 4119-1996 |
纸浆浆料浓度的测定 |
Pulps - Determination of stock concentration (ISO 4119:1995) |
EN ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
EN ISO 4126-2-2003 |
防过压的安全设备第2部分:防爆膜安全设备 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003) |
EN ISO 4126-4-2004 |
过压保护安全设备.第4部分:安全操作导阀 |
|
EN ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统 |
|
EN ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
EN ISO 4135-2001 |
麻醉剂与呼吸设备词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001) |
EN ISO 4142-2002 |
实验室玻璃器皿试管 |
Laboratory glassware - Test tubes (ISO 4142:2002) |
EN ISO 4157-1-1998 |
建筑工程制图代号体系第1部分:建筑物和建筑物的组成部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998) |
EN ISO 4157-2-1998 |
建筑工程制图代号体系第2部分:空间命名与标准号 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998) |
EN ISO 4157-3-1998 |
建筑工程制图代号体系第3部分:空间的标识 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998) |
EN ISO 4165-2003 |
道路车辆 电连接器 双极连接器 |
Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
EN ISO 4172-1996 |
技术制图建筑工程制图预制结构的安装图 |
Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991) |
EN ISO 4256-1998 |
液化石油气量规蒸气压的测定LPG法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996) |
EN ISO 4257-2001 |
液化石油气采样方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
EN ISO 4259-1995 |
石油产品试验方法精度数据的确定和应用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992/Cor 1:1993) |
EN ISO 4263-2-2003 |
石油和相关产品抗氧化油及液体老化性能的测定TOST试验第2部分:HFC级液压液试验程序 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
EN ISO 4264-1996 |
石油产品用四变量方程式计算中间馏份燃料十六烷指数 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995) |
EN ISO 4267-2-1995 |
石油与液化石油产品油量的计算第2部分:动态计量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988) |
EN ISO 4287-1998 |
产品几何量技术规范(GPS)表面结构:轮廓法表面结构的术语、定义及参数 |
Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) |
EN ISO 4288-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法评定表面结构的规则和方法 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
EN ISO 4320-1997 |
非离子表面活性剂浊点指数的测定容量法 |
Non-ionic surface active agents - Determination of cloud point index - Volumetric method (ISO 4320:1977, including Erratum:1980) |
EN ISO 4375-2004 |
水文测验.河流测量用索道系统 |
|
EN ISO 4404-2-2003 |
石油与相关产品阻燃液压油防腐蚀性的测定第3部分:无水液体 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003) |
EN ISO 445-1998 |
搬运货物用平托盘术语 |
Pallets for materials handling - Vocabulary (ISO 445:1996) |
EN ISO 449-1999 |
船舶与海上技术 磁罗盘、罗经柜和方位读写装置A级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997) |
EN ISO 4490-2001 |
金属粉末用校准漏斗(霍尔流量计)测定流动时间 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001) |
EN ISO 4491-2-1999 |
金属粉末用还原法测定氧含量第2部分:还原时氢的质量的损失(氢损) |
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997) |
EN ISO 4516-2002 |
金属和其他无机覆盖层维氏和努氏显微硬度检验 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
EN ISO 4518-1995 |
金属覆盖层厚度测量轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980) |
EN ISO 4524-3-1995 |
金属覆盖层金和金合金电镀层的试验方法第3部分:孔隙率的电图试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985) |
EN ISO 4524-6-1994 |
金属覆盖层金和金合金电镀层的试验方法第6部分:残留盐的测定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988) |
EN ISO 4526-2004 |
金属涂层.工程用镍电镀层 |
|
EN ISO 4527-2003 |
金属覆盖层自催化镍-磷合金电镀层规范和试验方法 |
Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
EN ISO 4535-1998 |
釉瓷和搪瓷 耐洗涤纺织品用热洗涤剂溶液腐蚀性能测定 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983) |
EN ISO 4536-1995 |
金属基体上的金属和无机覆盖层盐水滴腐蚀试验(SD试验) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985) |
EN ISO 4538-1995 |
金属覆盖层硫代乙酰胺腐蚀试验(TAA试验) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978) |