标准号 |
中文名称 |
英文名称 |
| DIN EN 2545-3-1995 |
航空和航天.钛和钛合金制预制材料和铸件.交货技术条件.第3部分:试制铸件和系列铸件 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings; German version EN 2545-3:1995) |
| DIN EN 2546-1988 |
航空和航天.耐蚀钢制径向啮合垫圈.尺寸 |
(Aerospace series; washers, lock with radial serrations in resisting steel; dimensions) |
| DIN EN 2547-1989 |
航空和航天.文献缩微化.105mm缩微胶卷(缩微胶片A6) |
(Aerospace series; filming of documents; microfilm 105 mm (microfiche A6); german version EN 2547:1987) |
| DIN EN 2549-1995 |
航空和航天.MoS锻造阳极氧化钛合金制短螺纹六角紧配合螺栓.等级:1100MPa(室温315℃) |
(Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2549:1995) |
| DIN EN 255-1-1997 |
用电驱动压缩机的空调,液体冷却设备和热力泵.暖气.第1部分:名称.定义.标志 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations; German version EN 255-1:1997) |
| DIN EN 255-2-1997 |
用电驱动压缩机的空调,液体冷却设备和热力泵.暖气.第2部分:室内暖气用设备标志的检验和要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units; German version EN 255-2:1997) |
| DIN EN 255-3-1997 |
用电驱动压缩机的空调,液体冷却设备和热力泵.暖气.第3部分:工业用水加热用设备标志的检验和要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (includes corrigendum AC:1997); German version 255-3:1997 + AC:1997) |
| DIN EN 255-4-1997 |
用电驱动压缩机的空调,液体冷却设备和热力泵.暖气.第4部分:工业用水加热及室内暖气用设备的要求 |
(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units; German version EN 255-4:1997) |
| DIN EN 2550-1993 |
航空和航天.英寸系列1050A铝100°普通沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992) |
| DIN EN 2551-1993 |
航空和航天.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992) |
| DIN EN 2552-1993 |
航空和航天.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992) |
| DIN EN 2553-1993 |
航空和航天.英寸系列2017A铝合金拱顶100°普通沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992) |
| DIN EN 2555-1993 |
航空和航天.英寸系列5056A铝合金拱顶100°普通沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992) |
| DIN EN 2556-1993 |
航空航天.5056A铅合金制阳性铬酸钝化带拱顶100度标准沉头实心铆钉 |
(Aerospace series; rivets, solid, 100 normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992) |
| DIN EN 2557-1997 |
航空和航天.碳素纤维预浸带.单位面积质量的测定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997) |
| DIN EN 2558-1997 |
航空和航天.碳化纤维预浸渍体.易挥发成份测定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997) |
| DIN EN 25580-1992 |
无损检验.工业射线照像观测仪.最低要求 |
(Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992) |
| DIN EN 2559-1997 |
航空和航天.碳素纤维预浸带.树脂成份,纤维成份以及单位面积纤维质量的测定 |
(Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997) |
| DIN EN 2560-1998 |
航空和航天.碳纤维预浸渍.树脂流测定 |
(Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998) |
| DIN EN 2561-1995 |
航空和航天.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995) |
| DIN EN 2562-1997 |
航空和航天.碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997) |
| DIN EN 2563-1997 |
航空和航天.碳化纤维增强塑料.单向层压制品.表观层压间抗切强度测定 |
(Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997) |
| DIN EN 2564-1998 |
航空和航天.碳纤维层压塑料.纤维成份,树脂成份和气孔成份的测定 |
(Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998) |
| DIN EN 25651-1993 |
纸、纸板和纸浆.性能表示单位 |
(Paper, board and pulps; units for expressing properties (ISO 5651:1989); German version EN 25651:1993) |
| DIN EN 25652-1992 |
信息加工.信息交换用9磁道12.7mm(0.5英时)磁带.带246字符/mm(6250字符/英时)GCR方法的格式和记录 |
(Information processing; 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange; format and recording, using group coding at 246 cpmm (6250 cpi) (ISO 5652:1984); english version EN 25652:1991) |
| DIN EN 25663-1993 |
水质.氮的基耶达(Kjeldahl)测定法.加硒矿化作用后的方法 |
(Water quality; determination of Kjeldahl nitrogen; method after mineralization with selenium (ISO 5663:1984); German version EN 25663:1993) |
| DIN EN 25667-1-1993 |
水质.取样.第1部分:取样程序设计指南 |
(Water quality; sampling; part 1: guidance on the design of sampling programmes (ISO 5667-1:1980); German version EN 25667-1:1993) |
| DIN EN 25667-2-1993 |
水质.取样.第2部分:取样技术导则 |
(Water quality; sampling; part 2: guidance on sampling techniques (ISO 5667-2:1991); German version EN 25667-2:1993) |
| DIN EN 2569-1992 |
航空和航天.操纵用钢丝绳的接头和锁扣.交货技术条件 |
(Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991) |
| DIN EN 257-1996 |
煤气燃烧用机械温度调节器 |
(Mechanical thermostats for gas burning appliances; German version EN 257:1992 + A1:1996) |
| DIN EN 2570-1996 |
航空和航天.镍镉电池.交货技术条件 |
(Aerospace series - Nickel-cadmium batteries - Technical specification; German version EN 2570:1996) |
| DIN EN 2574-1991 |
航空和航天.焊缝.图纸上的说明 |
(Aerospace series; welds; information on drawings) |
| DIN EN 2575-1989 |
航空和航天.文献缩微.缩微胶片16mm |
(Aerospace series; filming of documents; 16 mm microfilm; german version EN 2575:1988) |
| DIN EN 25813-1993 |
水质.溶解氧的测定.碘量法 |
(Water quality; determination of dissolved oxygen; iodometric method (ISO 5813:1983); german version EN 25813:1992) |
| DIN EN 25814-1992 |
水质.溶解氧的测定.电化法 |
(Water quality; determination of dissolved oxygen by the electrochemical probe method (ISO 5814:1990); german version EN 25814:1992) |
| DIN EN 25822-1992 |
点焊设备.锥度塞规和锥度环规(ISO5822-88) |
(Spot welding equipment; taper plug gauges and taper ring gauges (ISO 5822:1988); german version EN 25822:1991) |
| DIN EN 2583-1997 |
航空和航天.耐高温镍基合金(因科镍合金718)制MJ螺纹的螺丝.等级:1275MPa(室温下)/650℃.交货技术条件 |
(Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 C; technical specification; German version EN 2583:1997) |
| DIN EN 2584-2002 |
航空和航天系列.带自动润滑层的耐腐蚀钢制球面滑动轴承.在室温下高负荷、窄系列.尺寸和负载 |
(Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001) |
| DIN EN 2585-1992 |
航空和航天.室温条件下高负荷、宽系列、带自动润滑层的耐蚀钢关节轴承.尺寸和负载 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel with self-lubricating liner, wide series, elevated loads at ambient temperature; dimensions and loads; german version EN 2585:1992) |
| DIN EN 2586-1991 |
航空和航天.操作直杆用锁紧垫圈.尺寸 |
(Aerospace series; washers, lock, for flight control rods; dimensions; german version EN 2586:1991) |
| DIN EN 2587-1991 |
航空和航天.可调带螺杆柄的双叉头.尺寸及负载 |
(Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads) |
| DIN EN 2588-1988 |
航空和航天.带导槽的耐蚀钢制关节轴承.尺寸和负荷 |
(Aerospace series; bearings-spherical plain in corrosion resisting steel with assembly slot; dimensions and loads) |
| DIN EN 259-1-2001 |
卷式墙面饰层.高强度墙面饰层.第1部分:规范 |
(Wall coverings in roll form - Heavy duty wallcoverings - Part 1: Specifications; German version EN 259-1:2001) |
| DIN EN 259-2-2001 |
卷式墙面饰层.高强度墙面饰层.第2部分:耐冲击性测定 |
(Wall coverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance; German version EN 259-2:2001) |
| DIN EN 2591-101-1994 |
航空和航天.电器和光学仪器连接件.检验方法.第101部分:抽检 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination; German version EN 2591-101:1994) |
| DIN EN 2591-102-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第102部分:尺寸和质量检验 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass; German version EN 2591-102:1996) |
| DIN EN 2591-1992 |
航空和航天.电器和光学仪器连接件.检验方法.通则 |
(Aerospace series; elements of electrical and optical connection; test methods; general; german version EN 2591:1992) |
| DIN EN 2591-201-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第201部分:弱电区中接触电阻 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level; German version EN 2591-201:1996) |
| DIN EN 2591-202-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第202部分:额定电流下的接触电阻 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current; German version EN 2591-202:1996) |
| DIN EN 2591-203-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第203部分:微伏区中连续电流通量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 203: Electrical continuity at microvolt level; German version EN 2591-203:1996) |
| DIN EN 2591-204-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第204部分:微秒区中接触中断 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range; German version EN 2591-204:1996) |
| DIN EN 2591-205-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第205部分:外壳的连续电流通量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity; German version EN 2591-205:1996) |
| DIN EN 2591-206-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第206部分:绝缘电阻的测量 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance; German version EN 2591-206:1996) |
| DIN EN 2591-207-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第207部分:耐电压强度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test; German version EN 2591-207:1996) |
| DIN EN 2591-208-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第208部分:额定电流下的升温 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current; German version EN 2591-208:1996) |
| DIN EN 2591-209-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第209部分:电流温度负载降低值测定 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating; German version EN 2591-209:1996) |
| DIN EN 2591-210-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第210部分:电超载 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload; German version EN 2591-210:1998) |
| DIN EN 2591-211-2003 |
航空航天系列.光电连接件.试验方法.第211部分:电容量 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002) |
| DIN EN 2591-213-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第213部分:从100MHz至1GHz之间的屏蔽作用 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz; German version EN 2591-213:1997) |
| DIN EN 2591-216-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第216部分:触点渗透深度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts; German version EN 2591-216:1997) |
| DIN EN 2591-217-2003 |
航空航天系列.光电连接件.试验方法.第217部分:终端接线片和连机连接用在规定电流下的电压降 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices; German and English version EN 2591-217:2002) |
| DIN EN 2591-218-2003 |
航空航天系列.光电连接件.试验方法.第218部分:用温度和电流循环法试验终端接线片和连机连接的老化程度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002) |
| DIN EN 2591-219-2003 |
航空航天系列.光电连接件.试验方法.第219部分:绝缘终端接线片和连机连接的电压强度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002) |
| DIN EN 2591-301-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第301部分:耐温性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 301: Endurance at temperature; German version EN 2591-301:1996) |
| DIN EN 2591-302-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第302部分:气候序列 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence; German version EN 2591-302:1997) |
| DIN EN 2591-303-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第303部分:冷却/低气压和湿热 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat; German version EN 2591-303:1997) |
| DIN EN 2591-304-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第304部分:湿热条件下的耐久试验 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state; German version EN 2591-304:1997) |
| DIN EN 2591-305-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第305部分:快速温度变化 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature; German version EN 2591-305:1997) |
| DIN EN 2591-306-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第306部分:长霉 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth; German version EN 2591-306:1998) |
| DIN EN 2591-307-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第307部分:盐雾 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist; German version EN 2591-307:1998) |
| DIN EN 2591-308-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第308部分:沙子和灰尘 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust; German version EN 2591-308:1998) |
| DIN EN 2591-309-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第309部分:干热 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat; German version EN 2591-309:1997) |
| DIN EN 2591-310-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第310部分:冷冻 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold; German version EN 2591-310:1998) |
| DIN EN 2591-311-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第311部分:低气压 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure; German version EN 2591-311:1997) |
| DIN EN 2591-312-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第312部分:气密性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997) |
| DIN EN 2591-313-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第313部分:人工降雨 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain; German version EN 2591-313:1997) |
| DIN EN 2591-314-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第314部分:低压下的浸渍 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure; German version EN 2591-314:1997) |
| DIN EN 2591-315-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第315部分:液体阻力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance; German version EN 2591-315:1998) |
| DIN EN 2591-316-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第316部分:抗臭氧性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance; German version EN 2591-316:1997) |
| DIN EN 2591-317-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第317部分:非易燃性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability; German version EN 2591-317:1998) |
| DIN EN 2591-318-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第318部分:耐火性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance; German version EN 2591-318:1998) |
| DIN EN 2591-319-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第319部分:气封和无焊缠绕连接 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997) |
| DIN EN 2591-320-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第320部分:对土地的人工阳光照射 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level; German version EN 2591-320:1997) |
| DIN EN 2591-321-1997 |
航空和航天.电器和光学仪器连接件.检验方法.第321部分:湿热同期检验 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test; German version EN 2591-321:1997) |
| DIN EN 2591-322-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第322部分:密封性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998) |
| DIN EN 2591-323-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第323部分:热冲击 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 323: Thermal shock; German version EN 2591-323:1998) |
| DIN EN 2591-324-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第324部分:端面密度 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998) |
| DIN EN 2591-325-2003 |
航空航天系列.光电连接件.试验方法.第325部分:耐冰冻 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002) |
| DIN EN 2591-401-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第401部分:恒定加速 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 401: Acceleration, steady state; German version EN 2591-401:1996) |
| DIN EN 2591-402-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第402部分:冲击 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock; German version EN 2591-402:1998) |
| DIN EN 2591-403-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第403部分:正弦振动和噪声振动 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration; German version EN 2591-403:1998) |
| DIN EN 2591-404-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第404部分:横向力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load; German version EN 2591-404:1998) |
| DIN EN 2591-405-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第405部分:轴向力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load; German version EN 2591-405:1998) |
| DIN EN 2591-406-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第406部分:机械寿命 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance; German version EN 2591-406:1998) |
| DIN EN 2591-407-1999 |
航空和航天.电器和光学仪器连接件.检验方法.第407部分:触点夹持和密封的稳定性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999) |
| DIN EN 2591-408-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第408部分:接合力和断开力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 408: Mating and unmating forces; German version EN 2591-408:1998) |
| DIN EN 2591-409-1999 |
航空和航天.电器和光学仪器连接件.检验方法.第409部分:接触插接件中触点的紧密固定 |
(Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert; German version EN 2591-409:1999) |
| DIN EN 2591-410-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第410部分:壳体中触点插件的固定 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial); German version EN 2591-410:1998) |
| DIN EN 2591-411-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第411部分:壳体中触点插件的扭转保持性 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional); German version EN 2591-411:1998) |
| DIN EN 2591-412-1999 |
航空和航天.电器和光学仪器连接件.检验方法.第412部分:触点的插接力和拉力 |
(Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces; German version EN 2591-412:1999) |
| DIN EN 2591-413-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第413部分:弹簧接地装置的保持力 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998) |
| DIN EN 2591-414-1998 |
航空和航天.电器和光学仪器连接件.检验方法.第414部分:带电缆馈线断开装置的插接件的分离 |
(Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors; German version EN 2591-414:1998) |
| DIN EN 2591-415-2002 |
航空和航天系列.电气和光学连接件.检验方法.第415部分:检验探测器损害情况(塞孔接点) |
(Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001) |
| DIN EN 2591-416-2002 |
航空和航天系列.电气和光学连接件.检验方法.第416部分:触点抗弯强度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001) |
| DIN EN 2591-417-2002 |
航空和航天系列.电气和光学连接件.检验方法.第417部分:抗拉强度(压合连接) |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001) |
| DIN EN 2591-418-2002 |
航空和航天系列.电气和光学连接件.检验方法.第418部分:量规插入和拔出力(塞孔接点) |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001) |
| DIN EN 2591-419-2002 |
航空和航天系列.电气和光学连接件.检验方法.第419部分:插入物中插塞接点稳定性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001) |
| DIN EN 2591-420-2002 |
航空和航天系列.电气和光学连接件.检验方法.第420部分:后部附件的机械强度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2001) |
| DIN EN 2591-421-2003 |
航空航天系列.光电连接件.试验方法.第421部分:自由降落 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002) |
| DIN EN 2591-422-2003 |
航空航天系列.光电连接件.试验方法.第422部分:锁线孔强度 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002) |
| DIN EN 2591-424-2002 |
航空航天系列.电气和光学连接件的试验方法.第424部分:无钎焊缠绕连接件的剥离力 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections; German and English version EN 2591-424:2001) |
| DIN EN 2591-425-2002 |
航空和航天系列.电气和光学连接件.检验方法.第425部分:无钎焊缠绕连接的非缠绕性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections; German and English version EN 2591-425:2001) |
| DIN EN 2591-426-2002 |
航空和航天系列.电气和光学连接件.检验方法.第426部分:触点保持系统的有效性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 426: Contact retention system effectiveness; German and English version EN 2591-426:2001) |
| DIN EN 2591-427-2002 |
航空和航天系列.电气和光学连接件.检验方法.第427部分:防护罩附件的坚固性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 427: Robustness of protective cover attachment; German and English version EN 2591-427:2001) |
| DIN EN 2591-428-2003 |
航空航天系列.光电连接件.试验方法.第428部分:有波纹的终端接线片电流通过时的正弦振动 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002) |
| DIN EN 2591-501-2003 |
航空航天系列.光电连接件.试验方法.第501部分:软钎焊性 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002) |
| DIN EN 2591-502-2002 |
航空和航天系列.电气和光学连接件.检验方法.第502部分:束口 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001) |
| DIN EN 2591-503-2002 |
航空和航天系列.电气和光学连接件.检验方法.第503部分:压合后触点变形 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001) |
| DIN EN 2591-505-2002 |
航空和航天系列.电气和光学连接件.检验方法.第505部分:触点防护有效性(防碰擦) |
(Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001) |
| DIN EN 2591-506-2002 |
航空和航天系列.电气和光学连接件.检验方法.第506部分:工具的使用 |
(Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com