标准号 |
中文名称 |
英文名称 |
DIN EN ISO 12870-1998 |
眼镜科学.眼镜框.一般要求和试验方法 |
(Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997); German version EN ISO 12870:1997) |
DIN EN ISO 12870-2004 |
眼科光学.眼镜架.要求和试验方法 |
|
DIN EN ISO 12894-2002 |
热环境人类工效学.暴露于极热和冷环境中的人的医学监验 |
(Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001); German version EN ISO 12894:2001) |
DIN EN ISO 12922-2002 |
润滑剂、工业用油和相关产品(L级).H类(液压体系).目录HFAE、HFAS、HFB、HFC、HFDR和HFDU的规范 |
(Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002) |
DIN EN ISO 12937-2002 |
石油产品.水含量测定.库仑卡耳.费歇尔滴定法 |
(Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000); German version EN ISO 12937:2000) |
DIN EN ISO 12944-1-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第1部分:一般性介绍 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998); German version EN ISO 12944-1:1998) |
DIN EN ISO 12944-2-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第2部分:环境分类 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998); German version EN ISO 12944-2:1998) |
DIN EN ISO 12944-3-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第3部分:设计的基本原理 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998); German version EN ISO 12944-3:1998) |
DIN EN ISO 12944-5-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第5部分:涂层系统 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998); German version EN ISO 12944-5:1998) |
DIN EN ISO 12944-6-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第6部分:评定涂层系统的实验室试验 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test (ISO 12944-6:1998); German version EN ISO 12944-6:1998) |
DIN EN ISO 12944-7-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第7部分:涂层工作的实施和监督 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998); German version EN ISO 12944-7:1998) |
DIN EN ISO 12944-8-1998 |
涂料和清漆.用涂层系统对钢结构防腐蚀.第8部分:新工作和维修用规范的开发 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998); German version EN ISO 12944-8:1998) |
DIN EN ISO 12945-1-2001 |
纺织品.测定织物表面起毛和起球的倾向.第1部分:起球箱法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000); German version EN ISO 12945-1:2000) |
DIN EN ISO 12945-2-2000 |
织物.以表面起毛起球试验测定织物孔隙度.第2部分:改进的马丁代尔法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000); German version EN ISO 12945-2:2000) |
DIN EN ISO 12947-1-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第1部分:马丁代尔磨损试验机 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998); Version allemande EN ISO 12947-1:1998) |
DIN EN ISO 12947-2-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第2部分:试样损坏测定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998); German version EN ISO 12947-2:1998) |
DIN EN ISO 12947-3-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第3部分:质量损失测定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998); German version EN ISO 12947-3:1998) |
DIN EN ISO 12947-4-1999 |
织物.用马丁代尔法测定织物平面结构的耐磨性.第4部分:表面变化的评定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998); German version EN ISO 12947-4:1998) |
DIN EN ISO 12952-1-1999 |
纺织物.床单的燃烧性能.第1部分:用一只点燃的香烟检验易燃性的一般试验方法 |
(Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998); German version EN ISO 12952-1:1998) |
DIN EN ISO 12952-2-1999 |
纺织物.床单的燃烧性能.第2部分:用一只点燃的香烟检验易燃性的特殊试验方法 |
(Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998); German version EN ISO 12952-2:1998) |
DIN EN ISO 12952-3-1999 |
纺织物.床单的燃烧性能.第3部分:用小的敞开的火焰检验易燃性的一般试验方法 |
(Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998); German version EN ISO 12952-3:1998) |
DIN EN ISO 12952-4-1999 |
纺织物.床单的燃烧性能.第4部分:用小的敞开的火焰进行的可燃性特殊检验方法 |
(Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998); German version EN ISO 12952-4:1998) |
DIN EN ISO 12956-1999 |
土工和土工相关产品.特性化开口尺寸的测定 |
(Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999); German version EN ISO 12956:1999) |
DIN EN ISO 12957-1-2005 |
土工合成织物.摩擦特性的测定.第1部分:直接剪切试验 |
|
DIN EN ISO 12957-1-2005 |
土工合成织物.摩擦特性的测定.第1部分:直接剪切试验 |
|
DIN EN ISO 12957-2-2005 |
土工合成织物.摩擦特性的测定.第2部分:倾斜面试验 |
|
DIN EN ISO 12957-2-2005 |
土工合成织物.摩擦特性的测定.第2部分:倾斜面试验 |
|
DIN EN ISO 12958-1999 |
土工和土工相关产品.平面水流容量的测定 |
(Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999); German version EN ISO 12958:1999) |
DIN EN ISO 13000-1-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和设计 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997); German version EN ISO 13000-1:1997) |
DIN EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997); German version EN ISO 13000-2:1997) |
DIN EN ISO 13002-1999 |
碳纤维.长丝纱命名体制 |
(Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998) |
DIN EN ISO 1302-2002 |
产品几何量技术规范.在技术产品文件中表面结构的表示 |
(Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002) |
DIN EN ISO 1307-1996 |
工业通用橡胶和塑料软管.内径和长度公差 |
(Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995) |
DIN EN ISO 13090-1-1998 |
机械振动和冲击.试验及与人有关的实验安全性指南.第1部分:机械整体振动和反复冲击的影响 |
(Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998) |
DIN EN ISO 13212-1999 |
眼科光学.接触镜片保护产品.储藏寿命的测定导则 |
(Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO 13212:1999); German version EN ISO 13212:1999) |
DIN EN ISO 13230-1999 |
眼科光学.条形码规范 |
(Ophthalmic optics - Bar code specifications (ISO 13230:1999); German version EN ISO 13230:1999) |
DIN EN ISO 13294-1997 |
牙钻手柄.牙钻气动机 |
(Dental handpieces - Dental air-motors (ISO 13294:1997); German version EN ISO 13294:1997) |
DIN EN ISO 13295-1996 |
牙科旋切器.心轴 |
(Dental rotary instruments - Mandrels (ISO 13295:1994); German version EN ISO 13295:1996) |
DIN EN ISO 13297-2001 |
小型船舶.电气系统.交流电设备 |
(Small craft - Electrical systems - Alternating current installations (ISO 13297:2000); German version EN ISO 13297:2000) |
DIN EN ISO 13337-1998 |
开缝,轻型结构的夹紧销(夹紧筒). |
(Spring-type straight pins, slotted, light duty (ISO 13337:1997); German version EN ISO 13337:1997) |
DIN EN ISO 13340-2001 |
可运输气瓶.不可再充填的气瓶用阀门.规范和原型试验 |
(Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001) |
DIN EN ISO 13341-1998 |
可运输储气瓶.阀门和气瓶间的连接 |
(Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)(including corrigendum AC); German version EN ISO 13341:1997 + AC:1998) |
DIN EN ISO 13366-1-1997 |
乳.体细胞的计数.第1部分:显微法(参照法) |
(Milk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method) (ISO 13366-1:1997); German version EN ISO 13366-1:1997) |
DIN EN ISO 13366-2-1997 |
乳.体细胞的计数.第2部分:电子粒子计数法 |
(Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997); German version EN ISO 13366-2:1997) |
DIN EN ISO 13366-3-1997 |
乳.体细胞的计数.第3部分:荧光光电法 |
(Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997); German version EN ISO 13366-3:1997) |
DIN EN ISO 13370-1998 |
建筑物的热性能.经由地面的热传递.计算方法 |
(Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998); German version EN ISO 13370:1998) |
DIN EN ISO 13395-1996 |
水质.用流量分析法和光谱检出法测定亚硝酸氮和硝酸氮及两者的总含量(CFA和FIA). |
(Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996); German version EN ISO 13395:1996) |
DIN EN ISO 13397-1-1996 |
牙周刮匙,牙刮除器和牙钻孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995); German version EN ISO 13397-1:1995) |
DIN EN ISO 13397-2 Berichtigung 1-2000 |
对DINENISO13397-2:1996-11的勘误 |
(Corrigenda to DIN EN ISO 13397-2:1996-11) |
DIN EN ISO 13397-2-1996 |
牙周刮匙、牙科用刮除器和牙钻孔器.第2部分:牙周刮匙.Gr型 |
(Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes - Gr-type (ISO 13397-2:1996); German version EN ISO 13397-2:1996) |
DIN EN ISO 13397-2-2005 |
牙科学.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 |
|
DIN EN ISO 13397-3-1996 |
牙周刮匙,牙科刮除器和牙钻孔器.第3部分:牙科用刮除器.H型 |
(Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996); German version EN ISO 13397-3:1996) |
DIN EN ISO 13397-4-1998 |
牙周刮匙,牙科刮除器和牙钻孔器.第4部分:圆形牙钻孔器 |
(Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators, discoid-type (ISO 13397-4:1997); German version EN ISO 13397-4:1997) |
DIN EN ISO 13402-2001 |
外科和牙科手动设备.测定耐热压蒸、腐蚀和热曝性 |
(Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000) |
DIN EN ISO 13406-1-2000 |
平板式视觉显示工作的人类工效学要求.第1部分:介绍 |
(Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999); German version EN ISO 13406-1:1999) |
DIN EN ISO 13407-2000 |
交互系统以人为中心的设计过程 |
(Human-centred design processes for interactive systems (ISO 13407:1999); German version EN ISO 13407:1999) |
DIN EN ISO 13426-1-2003 |
土工织物及其有关产品.内部结构连接强度.第1部分:土工网眼 |
(Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003) |
DIN EN ISO 13427-1998 |
土工织物及其相关制品.磨损模拟(滑块试验) |
(Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998) |
DIN EN ISO 13428-2005 |
土工合成织物.土工合成织物防冲击损坏保护效果的测定 |
|
DIN EN ISO 13428-2005 |
土工合成织物.土工合成织物防冲击损坏保护效果的测定 |
|
DIN EN ISO 13431-1999 |
土工织物与土工织物相关产品.拉伸蠕变与蠕变断裂性能测定 |
(Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999); German version EN ISO 13431:1999) |
DIN EN ISO 13437-1998 |
土工织物及其相关制品.土壤中试样的安装和提取的方法以及实验室中测量试样的检验方法 |
(Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998); German version EN ISO 13437:1998) |
DIN EN ISO 13438-2005 |
土工织物和土工织物相关产品.测定耐氧化性的筛选试验方法 |
|
DIN EN ISO 1346-2005 |
纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 |
|
DIN EN ISO 13468-1-1997 |
塑料.透明材料光透射率总量的测定.第1部分:单束照射仪 |
(Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996) |
DIN EN ISO 13473-1-2004 |
利用表面外观表征路面结构.第1部分:平均剖面高度的测定 |
|
DIN EN ISO 13478-1997 |
流体传输用热塑管.抗快速裂纹扩展性(RCP)的测定.实物试验 |
(Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997); German version EN ISO 13478:1997) |
DIN EN ISO 13479-1997 |
流体传输用聚烯烃管.抗破裂扩展性的测定.有凹口的管上裂纹缓慢增长的试验方法(切口试验) |
(Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997); German version EN ISO 13479:1997) |
DIN EN ISO 13485-2001 |
质量体系.医疗装置.ENISO9001应用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001 (Revision of EN 46001:1996) (Identical to ISO 13485:1996); German version EN ISO 13485:2000) |
DIN EN ISO 13488-2001 |
质量体系.医疗装置.ENISO9002应用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 (Revision of EN 46002:1996) (Identical to ISO 13488:1996); German version EN ISO 13488:2000) |
DIN EN ISO 13500-1998 |
石油和天然气工业.钻孔清洗.规范和试验 |
(Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998); German version EN ISO 13500:1998) |
DIN EN ISO 13533-2002 |
石油和天然气工业.钻井和生产设备.钻井设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)) |
DIN EN ISO 13534-2001 |
石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造 |
(Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000) |
DIN EN ISO 13535-2002 |
汽油和天然气工业.钻井和生产设备.起重机设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)) |
DIN EN ISO 13565-1-1998 |
几何制品规范.纺织表面:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997) |
DIN EN ISO 13565-2-1998 |
几何制品规范.纺织表面:轮廓法.表面分层功能特性.第2部分:利用线材比例曲线表记述高特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997) |
DIN EN ISO 13565-3-2000 |
几何产品规范(GPS).表面特征:轮廓法.分层表面的功能特性.第3部分:利用材料的概率曲线描述高度特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000) |
DIN EN ISO 13567-1-2002 |
技术产品文件.计算机辅助设计(CAD)用层的编排和命名.第1部分:综述和原则 |
(Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998); German version EN ISO 13567-1:2002) |
DIN EN ISO 13567-2-2002 |
技术产品文件.计算机辅助设计(CAD)图层的编排和命名.第2部分:用于建筑工程文件的概念、格式和代码 |
(Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998); German version EN ISO 13567-2:2002) |
DIN EN ISO 13590-2004 |
小艇.个人船舶.建造和系统安装要求 |
|
DIN EN ISO 13625-2005 |
石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器 |
|
DIN EN ISO 13625-2005 |
石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器 |
|
DIN EN ISO 13628-1-1999 |
石油和天然气工业.水下生产系统的设计和操作.第1部分:一般要求和推荐规范 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999); German version EN ISO 13628-1:1999) |
DIN EN ISO 13628-2-2002 |
石油和天然气工业.水下生产系统的设计和操作.第2部分:水下和船用软管系统 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000); German version EN ISO 13628-2:2000 (German and english text)) |
DIN EN ISO 13628-3-2003 |
石油和天然气工业.水下采油系统的设计和操作.第3部分:通流线系统 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000) |
DIN EN ISO 13628-4-1999 |
石油和天然气工业.水下生产系统的设计和操作.第4部分:水下井口和主干设备 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999) |
DIN EN ISO 13631-2003 |
石油和天然气工业.封装的往复式气体压缩机 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002) |
DIN EN ISO 13666-1998 |
眼科光学.眼镜镜片.词汇 |
(Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998); German version EN ISO 13666:1998) |
DIN EN ISO 13680-2002 |
石油和天然气工业.用作套管、铺设管道和连接器材的耐腐蚀合金无缝管.技术交货条件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001) |
DIN EN ISO 13691-2003 |
石油和天然气工业.高速专用齿轮机构 |
(Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002) |
DIN EN ISO 13694-2000 |
光学和光学设备.激光和激光相关设备.激光束能量密度分布的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000) |
DIN EN ISO 13695-2004 |
光学和光子学.激光及其相关设备.激光光谱特性的试验方法 |
|
DIN EN ISO 13696-2002 |
光学和光学仪器.光学件辐射散射的试验方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002); German version EN ISO 13696:2002) |
DIN EN ISO 13702-2000 |
石油和天然气工业.近海生产设备着火和爆炸的控制和平息.要求和导则 |
(Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999) |
DIN EN ISO 13703-2003 |
石油和天然气工业.海上作业平台管道系统的设计和安装 |
(Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002) |
DIN EN ISO 13706-2000 |
石油和天然气工业.风冷热交换器 |
(Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000); German version EN ISO 13706:2000) |
DIN EN ISO 13709-2005 |
石油、石油化工和天然气工业用离心泵 |
|
DIN EN ISO 13709-2005 |
石油、石油化工和天然气工业用离心泵 |
|
DIN EN ISO 13710-2005 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
DIN EN ISO 13710-2005 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
DIN EN ISO 13716-2000 |
牙科学.可逆和不可逆水解胶体印模材料系统 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000) |
DIN EN ISO 13731-2002 |
热环境的人类工效学.词汇和符号 |
(Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001); German version EN ISO 13731:2001) |
DIN EN ISO 13734-2000 |
天然气.用做增味剂的有机硫化物.要求和试验方法 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test method (ISO 13734:1998); German version EN ISO 13734:2000) |
DIN EN ISO 13736-2000 |
石油产品和其他液态.闪点的测定.阿贝耳闭杯法 |
(Petroleum products and other liquids - Determination of flashpoint - Abel closed cup method (ISO 13736:1997); German version EN ISO 13736:1997) |
DIN EN ISO 13753-1998 |
机械振动和冲击.手-臂振动.测量手-臂装置负载下弹性材料振动传递的方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:1998) |
DIN EN ISO 13757-1998 |
液化石油气.油残余物的测定.高温法 |
(Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996); German version EN ISO 13757:1996) |
DIN EN ISO 13758-1997 |
液化石油气.丙烷干燥度检验.阀门冻结法 |
(Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996) |
DIN EN ISO 13759-1997 |
石油产品.柴油燃料中硝酸烷基酯的测定.光谱法 |
(Petroleum Products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996); German version EN ISO 13759:1996) |
DIN EN ISO 13760-1998 |
压力下液体输送用塑料管.Miner法则.累积损伤的计算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner`s rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998) |
DIN EN ISO 13783-1998 |
塑料管体系.未增塑聚氯乙烯(PVC-U)抗拉双插套管连接件.弯曲和内壁压力下密封性和机械强度的检验方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997) |
DIN EN ISO 13786-1999 |
建筑物件的热性能.动态热特性.计算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999); German version EN ISO 13786:1999) |
DIN EN ISO 13787-2003 |
建筑设备和工业装置用热绝缘产品.声明的导热系数的测定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003) |
DIN EN ISO 13788-2001 |
建筑物组件和件的湿热性能.避免严重的表面潮湿和冷凝的内表面温度.计算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001); German version EN ISO 13788:2001) |
DIN EN ISO 13789-1999 |
建筑物热性质.传输热损耗率.计算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999); German version EN ISO 13789:1999) |
DIN EN ISO 13790-2004 |
建筑物的热性能.房间取暖用能量的计算 |
|
DIN EN ISO 13791-2005 |
建筑物的热性能.夏季无机械通风冷却时房间内部温度的计算.通用标准和确认程序 |
|
DIN EN ISO 13792-2005 |
建筑物的热性能.无机器制冷条件下夏季房间内温度的计算.简化法 |
|
DIN EN ISO 13792-2005 |
建筑物的热性能.无机器制冷条件下夏季房间内温度的计算.简化法 |
|
DIN EN ISO 13792-2005 |
建筑物的热性能.无机器制冷条件下夏季房间内温度的计算.简化法 |
|
DIN EN ISO 13793-2001 |
建筑物的热性能.避免霜冻的地基的热设计 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001); German version EN ISO 13793:2001) |