标准号 |
中文名称 |
英文名称 |
prEN 3668-1997 |
标准号: |
中文标题: |
prEN 3671-1997 |
标准号: |
中文标题: |
prEN 3682-001-2000 |
航空航天系列插头和插座 矩形可互换插入型装在板上连续操作温度 150℃连接器第001部分:技术规范 |
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150℃ continuous - Part 001: Technical specification |
prEN 3682-002-2000 |
航空航天系列插头和插座 矩形可互换插入型装在板上连续操作温度 150℃连接器第002部分:性 |
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150℃ continuous - Part 002: Specification of performance and contact arrangements |
prEN 3716-002-1998 |
航空航天系列数字数据传输用具有三线接口的单路连接器第002部分:使用条件和产品标准目录 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions for use and list of product standards |
prEN 3716-003-1998 |
航空航天系列数字数据传输用具有三线接口的单路连接器第003部分:焊接插座产品标准 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard |
prEN 3716-004-1998 |
航空航天系列数字数据传输用具有三线接口的单路连接器第004部分:焊接插头产品标准 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard |
prEN 3719-1999 |
航空航天系列电缆用铝和铝合金导体产品标准 |
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
prEN 3724-2003 |
prEN 3724-2003 |
|
prEN 3725-2003 |
prEN 3725-2003 |
|
prEN 3726-2003 |
prEN 3726-2003 |
|
prEN 3727-2001 |
航空航天系列有法兰式定位盖的飞机机架用硬质滚动轴承尺寸和负荷 |
Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Dimensions and loads |
prEN 3728-1999 |
航空航天系列FE-PA92HT (A286)镀银耐热钢、自锁左旋螺纹轴螺母 |
Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
prEN 3729-1999 |
航空航天系列FE-PA92HT (A286)镀银耐热钢、自锁左旋螺纹环 |
Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
prEN 374-4-1990 |
抗化学药品和微生物的防护手套 第4部分:耐渗透的测定 漏气试验 |
Protective gloves against chemicals and micro-organisms; part 4: determination of resistance to penetration; air leak test |
prEN 374-5-1990 |
抗化学药品和微生物的防护手套 第5部分:耐化学药品渗透的测定 |
Protective gloves against chemicals and micro-organisms; part 5: determination of resistance to permeation by chemicals |
prEN 3745-202-1999 |
航空航天系列航空用光缆光纤试验方法第202部分:纤维尺寸 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
prEN 3745-306-1999 |
航空航天系列航空用光缆和光纤试验方法第306部分:衰减值温度循环的变化 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
prEN 3745-401-1999 |
航空航天系列航空用光缆和光纤试验方法第401部分:加速老化 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
prEN 3745-402-1998 |
航空航天系列航空用光缆和光纤试验方法第402部分:温度循环 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
prEN 3745-404-1999 |
航空航天系列航空用光缆和光纤试验方法第404部分:热冲击 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
prEN 3745-406-1999 |
航空航天系列航空用光缆和光纤试验方法第406部分:冷弯曲测试 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
prEN 3745-407-1999 |
航空航天系列航空用光缆和光纤试验方法第407部分:易燃性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability |
prEN 3745-412-1999 |
航空航天系列航空用光缆和光纤试验方法第412部分:防潮性能 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
prEN 3745-501-1998 |
航空航天系列航空用光缆和光纤试验方法第501部分:光纤校验试验 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test |
prEN 3745-502-1998 |
航空航天系列航空用光缆和光纤试验方法第502部分:短光纤的抗拉强度 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres |
prEN 3745-503-2000 |
航空航天系列航空用光缆和光纤试验方法第503部分:磨擦磨损 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
prEN 3745-506-2000 |
航空航天系列航空用光缆和光纤试验方法第506部分:抗撞击性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance |
prEN 3745-512-2000 |
航空航天系列航空用光缆和光纤试验方法第512部分:耐挠曲性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
prEN 3745-513-1999 |
航空航天系列航空用光缆和光纤试验方法第513部分:抗压碎性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
prEN 3745-703-2000 |
航空航天系列航空用光缆和光纤试验方法第703部分:制造商标记的耐久性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturers marking |
prEN 3745-807-2001 |
航空航天系列航空用光缆和光纤试验方法第807部分:传输阻抗 |
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance |
prEN 3745-808-2001 |
航空航天系列航空用光缆和光纤试验方法第808部分:串音 |
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk |
prEN 3752-2003 |
prEN 3752-2003 |
|
prEN 3757-1998 |
标准号: |
中文标题: |
prEN 3758-1997 |
航空航天系列单通道高速数据传输系统 |
Aerospace series - Simplex high speed data transmission system |
prEN 3771-1999 |
标准号: |
中文标题: |
prEN 3776-1999 |
航空航天系列耐腐蚀钢制快速断路、双球单动单锁带L柄销 |
Aerospace series - Pins, quick release, two balls, single acting, single locking, L type handle, in corrosion resisting steel |
prEN 3777-1999 |
航空航天系列快速断路、单动和双动销技术规范 |
Aerospace series - Pins, quick release, single and double acting - Technical specification |
prEN 3778-1999 |
航空航天系列耐腐蚀钢制快速断路、两球双动单锁带L柄销 |
Aerospace series - Pins, quick release, two balls, double acting, single locking, L type handle, in corrosion resisting steel |
prEN 3779-2001 |
航空航天系列聚碳酸酯板尺寸 |
Aerospace series - Polycarbonate sheet - Dimensions |
prEN 381-6-1990 |
手持式链锯使用者用防护服 第6部分:鞋靴的要求 |
Protective clothing for users of hand held chain saws; part 6: requirements for boots |
prEN 3813-2002 |
prEN 3813-2002 |
|
prEN 3820-1999 |
标准号: |
中文标题: |
prEN 3822-1999 |
航空航天系列 钝化耐热钢厚扁平垫圈 |
Aerospace series - Washers, flat, thick, in heat resisting steel, passivated |
prEN 3831-2003 |
prEN 3831-2003 |
|
prEN 384-2002 |
结构木材 机械性能特征值的测定 |
Structural timber - Determination of characteristic values of mechanical properties and density |
prEN 3841-100-1998 |
航空航天系列断路器试验方法第100部分:总则 |
Aerospace series - Circuit breakers, test methods - Part 100: General |
prEN 3841-301-1998 |
航空航天系列断路器试验方法第301部分:电压降 |
Aerospace series - Circuit breakers, test methods - Part 301: Voltage drop |
prEN 3841-302-1998 |
航空航天系列断路器试验方法第302部分:绝缘电阻抗 |
Aerospace series - Circuit breakers, electriques test methods - Part 302: Insulation resistance |
prEN 3841-303-1998 |
航空航天系列断路器试验方法第303部分:绝缘强度 |
Aerospace series - Circuit breakers, test methods - Part 303: Dielectric strength |
prEN 3841-304-1998 |
航空航天系列断路器试验方法第304部分:跳闸点 |
Aerospace series - Circuit breakers, test methods - Part 304: Tripping points |
prEN 3841-305-1998 |
航空航天系列断路器试验方法第305部分:短路性能 |
Aerospace series - Circuit breakers, test methods - Part 305: Short-circuit performance |
prEN 3841-306-1998 |
航空航天系列断路器试验方法第306部分:使用寿命 |
Aerospace series - Circuit breakers, test methods - Part 306: Service life |
prEN 3841-307-1998 |
航空航天系列断路器试验方法第307部分:带锁定的跳闸系统的性能 |
Aerospace series - Circuit breakers, test methods - Part 307: Performance with a locked tripping system |
prEN 3841-401-1998 |
航空航天系列断路器试验方法第401部分:沙尘和灰尘 |
Aerospace series - Circuit breakers, test methods - Part 401: Sand and dust |
prEN 3841-402-1998 |
航空航天系列断路器试验方法第402部分:腐蚀 |
Aerospace series - Circiut breakers, test methods - Part 402: Corrosion |
prEN 3841-403-1998 |
航空航天系列断路器试验方法第403部分:湿度 |
Aerospace series - Circuit breakers, test methods - Part 403: Humidity |
prEN 3841-404-1998 |
航空航天系列断路器试验方法第404部分:防爆性 |
Aerospace series - Circuit breakers, test methods - Part 404: Explosion proofness |
prEN 3841-405-1998 |
航空航天系列断路器试验方法第405部分:流体阻力 |
Aerospace series - Circuit breakers, test methods - Part 405: Fluid resistance |
prEN 3841-406-1998 |
航空航天系列断路器试验方法第406部分:可燃性 |
Aerospace series - Circuit breakers, test methods - Part 406: Flammability |
prEN 3841-503-1998 |
航空航天系列断路器试验方法第303部分:驱动部件的强度 |
Aerospace series - Circuit breakers, test methods - Part 503: Strength of actuating components |
prEN 3841-504-1998 |
航空航天系列断路器试验方法第504部分:装配组件的强度 |
Aerospace series - Circuit breakers, test methods - Part 504: Strength of mounting elements |
prEN 3841-505-1998 |
航空航天系列断路器试验方法第505部分:主要接线终端的强度 |
Aerospace series - Circuit breakers, test methods - Part 505: Strength of main terminals |
prEN 3841-506-1998 |
航空航天系列断路器试验方法第506部分:振动特性 |
Aerospace series - Circuit breakers, test methods - Part 506: Vibration performance |
prEN 3841-507-1998 |
航空航天系列断路器试验方法第507部分:机械冲击 |
Aerospace series - Circuit breakers, test methods - Part 507: Mechanical shocks |
prEN 3841-508-1998 |
航空航天系列断路器试验方法第508部分:离心加速度 |
Aerospace series - Circuit breakers, test methods - Part 508: Centrifugal acceleration |
prEN 3841-509-1998 |
航空航天系列断路器试验方法第509部分:信号接线柱的插入和拔出力 |
Aerospace series - Circuit breakers, test methods - Part 509: Insertion and extraction forces of signal contact terminals |
prEN 3841-510-1998 |
航空航天系列断路器试验方法第510部分:信号接线柱的强度 |
Aerospace series - Circuit breakers, test methods - Part 510: Strength of signal contact terminals |
prEN 3841-511-1998 |
航空航天系列断路器试验方法第511部分:综合试验温度、高度和振动 |
Aerospace series - Circuit breakers, test methods - Part 511: Combined test: temperature, altitude and vibration |
prEN 3843-1999 |
航空航天系列钝化耐热钢制十二角自锁带埋头孔螺母等级:1100 MPa (环境温度)/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650℃ |
prEN 3847-1997 |
航空航天系列色漆和清漆沉淀值的测定 |
Aerospace series - Paints and varnishes - Determination of sedimentation rating |
prEN 3861-2001 |
航空航天系列非金属材料、玻璃透明度材料标准、热钢化钠钙浮法玻璃 |
Aerospace series - Non-metallic materials; Glass transparencies - Material standard; Thermally tempered soda lime float glass |
prEN 3862-2001 |
航空航天系列非金属材料、玻璃透明度材料标准、化学钢化钠钙浮法玻璃 |
Aerospace series - Non-metallic materials; Glass transparencies - Material standard; Chemically tempered soda lime float glass |
prEN 3863-2001 |
航空航天系列非金属材料、玻璃透明度试验方法、平面度的测定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of flatness |
prEN 3864-2001 |
航空航天系列非金属材料、玻璃透明度试验方法、破裂系数的测定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of modulus of rupture |
prEN 3866-2001 |
航空航天系列非金属材料、玻璃透明度试验方法、刮痕和表面波纹的测定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of ream and surface ripple |
prEN 3874-1998 |
航空航天系列金属材料试验方法等幅控制力低循环疲劳测试 |
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled low cycle fatique testing |
prEN 3876-1997 |
航空航天系列金属材料试验方法铜焊合金熔化试验 |
Aerospace series - Test method for metallic materials - Braze alloys - Fusion test |
prEN 3877-1997 |
航空航天系列金属材料试验方法用铜焊合金的差热分析测定固线温度和液态温度 |
Aerospace series - Metallic materials - Test method - Determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys |
prEN 3878-1997 |
航空航天系列金属材料试验方法铜焊合金挠性试验 |
Aerospace series - Test method for metallic materials - Braze alloys - Flexibility test |
prEN 389-1990 |
非活性医疗器械的标签 |
Labelling of non-active medical devices |
prEN 3907-2003 |
prEN 3907-2003 |
|
prEN 3908-1999 |
航空航天系列钝化耐腐蚀钢润滑轴向喷嘴 |
Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
prEN 3913-1999 |
航空航天系列部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁短内螺纹上镀银的插 |
Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated internal thread, for salvage of components |
prEN 3914-1999 |
航空航天系列部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁长上镀银的插件 |
Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated on internal thread, for salvage of components |
prEN 3915-1999 |
航空航天系列部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁MJ螺纹插件等级 |
Aerospace series - Insert, thin wall, self-locking, Mj threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), for salvage of components, classification: 1275 MPa (at ambient temperature)/550℃ - Technical specification |
prEN 3916-1999 |
航空航天系列部件修复用薄壁插件 |
Aerospace series - Insert, thin wall - Salvage procedure for components |
prEN 3969-1997 |
标准号: |
中文标题: |
prEN 3971-1997 |
标准号: |
中文标题: |
prEN 3976-1999 |
航空航天系列钛和钛合金试验方法氢含量确定的化学分析 |
Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
prEN 398-1992 |
摩托车和机动自行车驾驶者和乘客用防护头盔 |
Protective helmets for drivers and passengers of motor cycles and mopeds |
prEN 3988-1998 |
航空航天系列金属材料的试验方法等幅控制应变低循环疲劳试验 |
Aerospace series - Test methods for metallic materials - Constant amplitude strain-controlled low cycle fatique testing |
prEN 3991-1997 |
标准号: |
中文标题: |
prEN 3994-1997 |
航空航天系列 FE-CM1501 (X13CrNiMoCo12-3-2-2)非热处理钢再熔原料 |
Aerospace series - Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) non heat treated - Remelting stock |
prEN 40-2-1999 |
灯柱 第2部分:一般要求和尺寸 |
Lighting columns - Part 2: General requirements and dimensions |
prEN 40-9-1991 |
灯柱 第9部分:加筋和预应力混凝土灯柱的特殊要求 |
Lighting columns; part 9: special requirements for reinforced and prestressed concrete lighting columns |
prEN 4008-001-1998 |
航空航天系列光电连接件雷管钳和相关的附件第001部分:技术规范 |
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification |
prEN 4008-002-1998 |
航空航天系列光电连接件雷管钳和相关的附件第002部分:产品标准目录 |
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards |
prEN 4012-2003 |
prEN 4012-2003 |
|
prEN 403-2003 |
自救式呼吸保护设备 火灾中自救用带罩过滤装置 要求、测试和标志 |
Respiratory protective devices for self-rescue - Filtering devices with hood for self-rescue from fire - Requirements, testing, marking / Note: Intended as replacement for EN 403 (1993-04). |
prEN 404-2002 |
自救式呼吸保护设备 自救式一氧化碳过滤器 要求、测试和标志 |
Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide - Requirements, testing, marking |
prEN 4048-2003 |
prEN 4048-2003 |
|
prEN 4057-100-2001 |
航空航天系列铠装用绳索系材试验方法第100部分:总则 |
Aerospace series - Cable ties for harnesses; Test methods - Part 100: General |
prEN 4057-201-2001 |
航空航天系列铠装用绳索系材试验方法第201部分:可视检查/注: EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 201: Visual examination / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-202-2001 |
航空航天系列铠装用绳索系材试验方法第202部分:质量和尺寸的检查/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 202: Examination of mass and dimensions / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-302-2001 |
航空航天系列铠装用绳索系材试验方法第302部分:易燃性/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 302: Flammability / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-303-2001 |
航空航天系列铠装用绳索系材试验方法第303部分:耐流体性/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 303: Resistance to fluids / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-304-2001 |
航空航天系列铠装用绳索系材试验方法第304部分:最高工作温度下环形抗拉强度/注:与EN 4057-100结合 |
Aerospace series - Cable ties for harnesses; Test methods - Part 304: Loop tensile strength at maximum working temperature / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-305-2001 |
航空航天系列铠装用绳索系材试验方法第305部分:色牢度/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 305: Colour fastness / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-306-2001 |
航空航天系列铠装用绳索系材试验方法第306部分:热老化试验/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 306: Heat ageing test / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-307-2001 |
航空航天系列铠装用绳索系材试验方法第307部分:抗紫外辐射 |
Aerospace series - Cable ties for harnesses; Test methods - Part 307: Resistance to ultra violet radiation |
prEN 4057-401-2001 |
航空航天系列铠装用绳索系材试验方法第401部分:环形抗拉强度/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 401: Loop tensile strength / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-402-2001 |
航空航天系列铠装用绳索系材试验方法第402部分:寿命周期/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 402: Life cycle / Note: Applies in conjunction with EN 4057-100 |
prEN 4057-404-2001 |
航空航天系列铠装用绳索系材试验方法第404部分:低温装置/注:与EN 4057-100结合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 404: Low temperature installation / Note: Applies in conjunction with EN 4057-100 |
prEN 4067-001-1998 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第001部分:技术规范 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 001: Technical specification |
prEN 4067-002-1998 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第002部分:排列性能规范和连 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 002: Specification of performance and contact arrangements |
prEN 4067-003-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第003部分:方法兰式插座产 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 003: Square flange receptacle - Product standard |
prEN 4067-004-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第004部分:装锁紧螺母的插座 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 004: Jam-nut mounted receptacle - Product standard |
prEN 4067-005-2000 |
航空航天系列防火的最高操作温度为260℃的螺纹式环耦合的防凹口圆电连接器第005部分:密封的方形法兰式 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 005: Hermetic square flange receptacle - Product standard |